[PATCH v2 5/8] serial: qcom-geni: introduce qcom_geni_serial_poll_bitfield()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Douglas Anderson <dianders@xxxxxxxxxxxx>

With a small modification the qcom_geni_serial_poll_bit() function
could be used to poll more than just a single bit. Let's generalize
it. We'll make the qcom_geni_serial_poll_bit() into just a wrapper of
the general function.

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20240610152420.v4.5.Ic6411eab8d9d37acc451705f583fb535cd6dadb2@changeid
Tested-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
 drivers/tty/serial/qcom_geni_serial.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 54052c68555d..7bbd70c30620 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -265,8 +265,8 @@ static bool qcom_geni_serial_secondary_active(struct uart_port *uport)
 	return readl(uport->membase + SE_GENI_STATUS) & S_GENI_CMD_ACTIVE;
 }
 
-static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
-				      unsigned int offset, u32 field, bool set)
+static bool qcom_geni_serial_poll_bitfield(struct uart_port *uport,
+					   unsigned int offset, u32 field, u32 val)
 {
 	u32 reg;
 	struct qcom_geni_serial_port *port;
@@ -286,7 +286,7 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
 	timeout_us = DIV_ROUND_UP(timeout_us, 10) * 10;
 	while (timeout_us) {
 		reg = readl(uport->membase + offset);
-		if ((bool)(reg & field) == set)
+		if ((reg & field) == val)
 			return true;
 		udelay(10);
 		timeout_us -= 10;
@@ -294,6 +294,12 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
 	return false;
 }
 
+static bool qcom_geni_serial_poll_bit(struct uart_port *uport,
+				      unsigned int offset, u32 field, bool set)
+{
+	return qcom_geni_serial_poll_bitfield(uport, offset, field, set ? field : 0);
+}
+
 static void qcom_geni_serial_setup_tx(struct uart_port *uport, u32 xmit_size)
 {
 	u32 m_cmd;
-- 
2.44.2





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux