Linux Serial
[Prev Page][Next Page]
- Re: [PATCH 1/7] serial: 8250_dwlib: RS485 HW half duplex support
- Re: [PATCH 1/7] serial: 8250_dwlib: RS485 HW half duplex support
- Re: [PATCH 1/2] dt-bindings: serial: samsung: Add ARTPEC-8 UART
- Re: [PATCH 1/7] serial: 8250_dwlib: RS485 HW half duplex support
- Re: [RFT v4] tty/sysrq: Make sysrq handler NMI aware
- [PATCH v2] kgdboc: fix return value of __setup handler
- Re: [PATCH v2 2/2] soc: fujitsu: Add A64FX diagnostic interrupt driver
- From: hasegawa-hitomi@xxxxxxxxxxx
- Re: [PATCH] kgdboc: fix return value of __setup handler
- Re: [PATCH] kgdboc: fix return value of __setup handler
- Re: [PATCH 1/7] serial: 8250_dwlib: RS485 HW half duplex support
- Re: Deadlock at reboot?
- Re: [PATCH] kgdboc: fix return value of __setup handler
- Re: [RFT v4] tty/sysrq: Make sysrq handler NMI aware
- Re: [PATCH 1/2] dt-bindings: serial: samsung: Add ARTPEC-8 UART
- Re: [PATCH 1/7] serial: 8250_dwlib: RS485 HW half duplex support
- Re: [PATCH 1/7] serial: 8250_dwlib: RS485 HW half duplex support
- Re: [RFT v4] tty/sysrq: Make sysrq handler NMI aware
- Re: [PATCH 1/7] serial: 8250_dwlib: RS485 HW half duplex support
- Re: [PATCH 1/7] serial: 8250_dwlib: RS485 HW half duplex support
- Re: [PATCH 1/7] serial: 8250_dwlib: RS485 HW half duplex support
- [PATCH] serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()
- [PATCH] serial: sc16is7xx: Clear RS485 bits in the shutdown
- [PATCH v3 8/8] tty: serial: samsung: simplify getting OF match data
- From: Krzysztof Kozlowski
- [PATCH v3 7/8] tty: serial: samsung: constify variables and pointers
- From: Krzysztof Kozlowski
- [PATCH v3 6/8] tty: serial: samsung: constify s3c24xx_serial_drv_data members
- From: Krzysztof Kozlowski
- [PATCH v3 5/8] tty: serial: samsung: constify UART name
- From: Krzysztof Kozlowski
- [PATCH v3 4/8] tty: serial: samsung: constify s3c24xx_serial_drv_data
- From: Krzysztof Kozlowski
- [PATCH v3 3/8] tty: serial: samsung: reduce number of casts
- From: Krzysztof Kozlowski
- [PATCH v3 2/8] tty: serial: samsung: embed s3c2410_uartcfg in parent structure
- From: Krzysztof Kozlowski
- [PATCH v3 1/8] tty: serial: samsung: embed s3c24xx_uart_info in parent structure
- From: Krzysztof Kozlowski
- [PATCH v3 0/8] tty: serial: samsung: minor fixes/cleanups
- From: Krzysztof Kozlowski
- Re: [PATCH v2 3/7] tty: serial: samsung: constify s3c24xx_serial_drv_data
- From: Krzysztof Kozlowski
- [PATCH] serial: 8250_tegra: mark acpi_device_id as unused with !ACPI
- From: Krzysztof Kozlowski
- Re: [PATCH v2 7/7] tty: serial: samsung: simplify getting OF match data
- From: Krzysztof Kozlowski
- Re: [PATCH] serial: 8250_mtk: make two read-only arrays static const
- [PATCH] kgdboc: fix return value of __setup handler
- [PATCH] serial: 8250_mtk: make two read-only arrays static const
- Re: [PATCH v2 7/7] tty: serial: samsung: simplify getting OF match data
- Re: [PATCH 1/7] serial: 8250_dwlib: RS485 HW half duplex support
- Re: [PATCH 1/7] serial: 8250_dwlib: RS485 HW half duplex support
- RE: [PATCH v2 0/7] tty: serial: samsung: minor fixes/cleanups
- RE: [PATCH v2 3/7] tty: serial: samsung: constify s3c24xx_serial_drv_data
- RE: [PATCH v2 7/7] tty: serial: samsung: simplify getting OF match data
- [PATCH] tty: serial: jsm: remove redundant assignments to variable linestatus
- Re: [RFT v4] tty/sysrq: Make sysrq handler NMI aware
- Re: [PATCH v2 2/2] soc: fujitsu: Add A64FX diagnostic interrupt driver
- Re: [PATCH v2 1/2] tty/sysrq: Make sysrq handler NMI aware
- [RFT v4] tty/sysrq: Make sysrq handler NMI aware
- Re: [PATCH 1/7] serial: 8250_dwlib: RS485 HW half duplex support
- [PATCH] tty: serial: owl: Fix missing clk_disable_unprepare() in owl_uart_probe
- Re: [RFC PATCH 6/7] serial: General support for multipoint addresses
- Re: [PATCH 2/7] serial: 8250_dwlib: RS485 HW full duplex support
- Re: [PATCH 1/7] serial: 8250_dwlib: RS485 HW half duplex support
- Re: [PATCH 2/2] tty: serial: samsung: Add ARTPEC-8 support
- From: Krzysztof Kozlowski
- Re: [PATCH 1/2] dt-bindings: serial: samsung: Add ARTPEC-8 UART
- From: Krzysztof Kozlowski
- [PATCH 2/2] tty: serial: samsung: Add ARTPEC-8 support
- [PATCH 0/2] Add support for ARTPEC-8 UART
- [PATCH 1/2] dt-bindings: serial: samsung: Add ARTPEC-8 UART
- Re: [PATCH v2 3/7] tty: serial: samsung: constify s3c24xx_serial_drv_data
- From: Krzysztof Kozlowski
- Re: [PATCH v2 3/7] tty: serial: samsung: constify s3c24xx_serial_drv_data
- Re: [PATCH v2 1/7] tty: serial: samsung: embed s3c24xx_uart_info in parent structure
- From: Krzysztof Kozlowski
- [PATCH v2 7/7] tty: serial: samsung: simplify getting OF match data
- From: Krzysztof Kozlowski
- [PATCH v2 4/7] tty: serial: samsung: constify UART name
- From: Krzysztof Kozlowski
- [PATCH v2 6/7] tty: serial: samsung: constify variables and pointers
- From: Krzysztof Kozlowski
- [PATCH v2 5/7] tty: serial: samsung: constify s3c24xx_serial_drv_data members
- From: Krzysztof Kozlowski
- [PATCH v2 3/7] tty: serial: samsung: constify s3c24xx_serial_drv_data
- From: Krzysztof Kozlowski
- [PATCH v2 2/7] tty: serial: samsung: embed s3c2410_uartcfg in parent structure
- From: Krzysztof Kozlowski
- [PATCH v2 1/7] tty: serial: samsung: embed s3c24xx_uart_info in parent structure
- From: Krzysztof Kozlowski
- [PATCH v2 1/7] tty: serial: samsung: embed s3c24xx_uart_info in parent structure
- From: Krzysztof Kozlowski
- [PATCH v2 0/7] tty: serial: samsung: minor fixes/cleanups
- From: Krzysztof Kozlowski
- Re: [PATCH 5/7] tty: serial: samsung: constify s3c24xx_serial_drv_data members
- From: Krzysztof Kozlowski
- Re: [PATCH 3/7] tty: serial: samsung: constify s3c24xx_serial_drv_data
- From: Krzysztof Kozlowski
- Re: [PATCH 6/7] tty: serial: samsung: constify variables and pointers
- Re: [PATCH 5/7] tty: serial: samsung: constify s3c24xx_serial_drv_data members
- Re: [PATCH 4/7] tty: serial: samsung: constify UART name
- Re: [PATCH 3/7] tty: serial: samsung: constify s3c24xx_serial_drv_data
- Re: [PATCH 2/7] tty: serial: samsung: embed s3c2410_uartcfg in parent structure
- Re: [PATCH 1/7] tty: serial: samsung: embed s3c24xx_uart_info in parent structure
- [PATCH v2] tty: serial: serial_txx9: remove struct uart_txx9_port
- Re: [RFC PATCH 3/7] serial: 8250_dwlib: Implement SW half duplex support
- Re: [PATCH 1/7] serial: 8250_dwlib: RS485 HW half duplex support
- Re: [RFC PATCH 6/7] serial: General support for multipoint addresses
- Re: [RFC PATCH 3/7] serial: 8250_dwlib: Implement SW half duplex support
- Re: [PATCH 2/7] serial: 8250_dwlib: RS485 HW full duplex support
- Re: [PATCH 1/7] serial: 8250_dwlib: RS485 HW half duplex support
- Re: [PATCH v2 1/1] serial: 8520_mtk: Prepare for platform_get_irq_optional() changes
- Re: [PATCH v2 1/1] serial: 8520_mtk: Prepare for platform_get_irq_optional() changes
- Re: [PATCH v2 1/2] tty/sysrq: Make sysrq handler NMI aware
- Re: Deadlock at reboot?
- Re: Deadlock at reboot?
- Re: Deadlock at reboot?
- Re: [PATCH v4] serial: make uart_console_write->putchar()'s character an unsigned char
- Deadlock at reboot?
- [PATCH 7/7] tty: serial: samsung: simplify getting OF match data
- From: Krzysztof Kozlowski
- [PATCH 6/7] tty: serial: samsung: constify variables and pointers
- From: Krzysztof Kozlowski
- [PATCH 5/7] tty: serial: samsung: constify s3c24xx_serial_drv_data members
- From: Krzysztof Kozlowski
- [PATCH 4/7] tty: serial: samsung: constify UART name
- From: Krzysztof Kozlowski
- [PATCH 3/7] tty: serial: samsung: constify s3c24xx_serial_drv_data
- From: Krzysztof Kozlowski
- [PATCH 2/7] tty: serial: samsung: embed s3c2410_uartcfg in parent structure
- From: Krzysztof Kozlowski
- [PATCH 1/7] tty: serial: samsung: embed s3c24xx_uart_info in parent structure
- From: Krzysztof Kozlowski
- [PATCH v2 1/2] tty/sysrq: Make sysrq handler NMI aware
- [PATCH v2 2/2] soc: fujitsu: Add A64FX diagnostic interrupt driver
- [PATCH v2 0/2] soc: fujitsu: Add A64FX diagnostic interrupt driver
- [tty:tty-testing] BUILD SUCCESS 3631e48df0dbfcce3b08f0ccafcaa587657379cd
- Re: [PATCH] dt-bindings: serial: fsl-lpuart: Add imx93 compatible string
- RE: [PATCH v3] serial: make uart_console_write->putchar()'s character an unsigned char
- RE: [PATCH v3] serial: make uart_console_write->putchar()'s character an unsigned char
- Re: [PATCH v3] serial: make uart_console_write->putchar()'s character an unsigned char
- Re: [PATCH v3] serial: make uart_console_write->putchar()'s character an unsigned char
- RE: [PATCH 2/2] dt-bindings: serial: renesas,sci: Update compatible string for RZ/G2UL SoC
- Re: [PATCH v3] serial: make uart_console_write->putchar()'s character an unsigned char
- Re: [PATCH 1/2] dt-bindings: serial: renesas,scif: Update compatible string for RZ/G2UL SoC
- Re: [PATCH v4] serial: make uart_console_write->putchar()'s character an unsigned char
- RE: [PATCH v3] serial: make uart_console_write->putchar()'s character an unsigned char
- Re: [PATCH 2/2] dt-bindings: serial: renesas,sci: Update compatible string for RZ/G2UL SoC
- Re: [PATCH v3] serial: make uart_console_write->putchar()'s character an unsigned char
- RE: [PATCH 1/2] dt-bindings: serial: renesas,scif: Update compatible string for RZ/G2UL SoC
- RE: [PATCH 2/2] dt-bindings: serial: renesas,sci: Update compatible string for RZ/G2UL SoC
- Re: [PATCH 1/2] dt-bindings: serial: renesas,scif: Update compatible string for RZ/G2UL SoC
- Re: [PATCH 2/2] dt-bindings: serial: renesas,sci: Update compatible string for RZ/G2UL SoC
- [PATCH 2/2] dt-bindings: serial: renesas,sci: Update compatible string for RZ/G2UL SoC
- [PATCH 1/2] dt-bindings: serial: renesas,scif: Update compatible string for RZ/G2UL SoC
- Re: [PATCH] Support for new variant of PL2303GS adapter
- Re: [PATCH v4] serial: make uart_console_write->putchar()'s character an unsigned char
- Re: [PATCH v3] serial: make uart_console_write->putchar()'s character an unsigned char
- Re: [PATCH V3] tty: serial: meson: Fix the compile link error reported by kernel test robot
- [PATCH v4] serial: make uart_console_write->putchar()'s character an unsigned char
- Re: [PATCH v3] serial: make uart_console_write->putchar()'s character an unsigned char
- Re: [PATCH v3] serial: make uart_console_write->putchar()'s character an unsigned char
- Re: [PATCH v3] serial: make uart_console_write->putchar()'s character an unsigned char
- Re: [PATCH v3] serial: make uart_console_write->putchar()'s character an unsigned char
- Re: [PATCH v3] serial: make uart_console_write->putchar()'s character an unsigned char
- RE: [PATCH v3] serial: make uart_console_write->putchar()'s character an unsigned char
- [PATCH] Support for new variant of PL2303GS adapter
- Re: [PATCH v3] serial: make uart_console_write->putchar()'s character an unsigned char
- Re: [PATCH v3] serial: make uart_console_write->putchar()'s character an unsigned char
- Re: [PATCH 4/7] dt_bindings: snps-dw-apb-uart: Add RS485
- [tty:tty-next] BUILD SUCCESS 16b3ac9041a33fd34990717096476145d08d42fc
- [tty:tty-testing] BUILD SUCCESS 47b95e8ab731511b7ed7924ec3ec922e14737e4e
- Re: [RFC 1/1] tty: n_gsm: improve standard compliance and feature completeness
- Re: [RFC 1/1] tty: n_gsm: improve standard compliance and feature completeness
- Re: [PATCH v2] serial: samsung: Add samsung_early_read to support early kgdboc
- From: Krzysztof Kozlowski
- Re: [PATCH] serial: samsung: Add samsung_early_read to support early kgdboc
- [PATCH v2] serial: samsung: Add samsung_early_read to support early kgdboc
- Re: [PATCH] serial: samsung: Add samsung_early_read to support early kgdboc
- From: Krzysztof Kozlowski
- [PATCH] serial: samsung: Add samsung_early_read to support early kgdboc
- [RFC PATCH 5/7] serial: termbits: ADDRB to indicate 9th bit addressing mode
- [RFC PATCH 6/7] serial: General support for multipoint addresses
- [RFC PATCH 7/7] serial: 8250_dwlib: Support for 9th bit multipoint addressing
- [RFC PATCH 3/7] serial: 8250_dwlib: Implement SW half duplex support
- [PATCH 2/7] serial: 8250_dwlib: RS485 HW full duplex support
- [PATCH 4/7] dt_bindings: snps-dw-apb-uart: Add RS485
- [PATCH 0/7] Add RS485 support to DW UART
- [PATCH 1/7] serial: 8250_dwlib: RS485 HW half duplex support
- Re: [PATCH 5/5] spi: make remove callback a void function
- [PATCH v3] serial: make uart_console_write->putchar()'s character an unsigned char
- Re: [PATCH V7 0/6] Use CCF to describe the UART baud rate clock
- Re: [PATCH V3] tty: serial: meson: Fix the compile link error reported by kernel test robot
- Re: [PATCH V7 3/6] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame
- [PING][PATCH v3 0/2] serial: 8250: Fixes for Oxford Semiconductor 950 UARTs
- Re: [PATCH] serial: sh-sci: Simplify multiplication/shift logic
- [tty:tty-testing] BUILD REGRESSION 31979060cc07600b250d5837a33dae1beacfeb74
- Re: [PATCH V7 3/6] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame
- Re: [PATCH V7 0/6] Use CCF to describe the UART baud rate clock
- Re: [PATCH -next] serial: mvebu-uart: fix return value check in mvebu_uart_clock_probe()
- Re: [PATCH V7 0/6] Use CCF to describe the UART baud rate clock
- [tty:tty-next] BUILD REGRESSION d4ab5487cc77a4053dc9070c5761ad94bf397825
- Re: [PATCH V7 3/6] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame
- Re: [PATCH V7 0/6] Use CCF to describe the UART baud rate clock
- Re: [PATCH V7 0/6] Use CCF to describe the UART baud rate clock
- Re: [PATCH V7 0/6] Use CCF to describe the UART baud rate clock
- Re: [PATCH V7 0/6] Use CCF to describe the UART baud rate clock
- Re: [PATCH V3] tty: serial: meson: Fix the compile link error reported by kernel test robot
- Re: [PATCH V7 3/6] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame
- Re: [PATCH V7 0/6] Use CCF to describe the UART baud rate clock
- Re: [PATCH V3] tty: serial: meson: Fix the compile link error reported by kernel test robot
- [PATCH -next] serial: mvebu-uart: fix return value check in mvebu_uart_clock_probe()
- Re: [PATCH V7 0/6] Use CCF to describe the UART baud rate clock
- Re: [PATCH V3] tty: serial: meson: Fix the compile link error reported by kernel test robot
- Re: [PATCH V7 3/6] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame
- [PATCH RESEND 3/3] sc16is7xx: Set AUTOCTS and AUTORTS bits
- [PATCH RESEND 2/3] sc16is7xx: Handle modem status lines
- [PATCH RESEND 1/3] sc16is7xx: Properly resume TX after stop
- [PATCH RESEND 0/3] sc16is7xx: Hardware flow control fixes
- Re: [PATCH V7 0/6] Use CCF to describe the UART baud rate clock
- Re: [PATCH V7 5/6] tty: serial: meson: The system stuck when you run the stty command on the console to change the baud rate
- [PATCH] tty: serial: meson: Fixed an issue where pclk was turned on on probe but should be turned off on subsequent errors.
- [PATCH V3] tty: serial: meson: Fix the compile link error reported by kernel test robot
- Re: [PATCH tty-next] serial:sunplus-uart:Fix compile error while CONFIG_SERIAL_SUNPLUS_CONSOLE=n
- [PATCH tty-next] serial:sunplus-uart:Fix compile error while CONFIG_SERIAL_SUNPLUS_CONSOLE=n
- Re: [PATCH V3] tty: serial: meson: Fix the compile link error reported by kernel test robot
- Re: mmotm 2022-02-28-14-45 uploaded (drivers/tty/serial/sunplus-uart.c:)
- Re: mmotm 2022-02-28-14-45 uploaded (drivers/tty/serial/sunplus-uart.c:)
- Re: [PATCH V3] tty: serial: meson: Fix the compile link error reported by kernel test robot
- Re: [PATCH V2] tty: serial: meson: Fix the compile link error reported by kernel test robot
- Re: [PATCH V3] tty: serial: meson: Fix the compile link error reported by kernel test robot
- Re: [PATCH 4/5] sdio_uart: make use of UART_LCR_WLEN() + tty_get_char_size()
- Re: [PATCH V3] tty: serial: meson: Fix the compile link error reported by kernel test robot
- Re: [PATCH V3] tty: serial: meson: Fix the compile link error reported by kernel test robot
- Re: [PATCH V3] tty: serial: meson: Fix the compile link error reported by kernel test robot
- [PATCH V3] tty: serial: meson: Fix the compile link error reported by kernel test robot
- [RFT v3] tty/sysrq: Make sysrq handler NMI aware
- Re: [PATCH V2] tty: serial: meson: Fix the compile link error reported by kernel test robot
- Re: [RFT v2] tty/sysrq: Make sysrq handler NMI aware
- Re: [RFT v2] tty/sysrq: Make sysrq handler NMI aware
- Re: [PATCH v3 1/7] dt-bindings: timer: Add compatible for Mediatek MT8186
- Re: [PATCH V7 3/6] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame
- Re: [PATCH V7 0/6] Use CCF to describe the UART baud rate clock
- Re: [PATCH V7 5/6] tty: serial: meson: The system stuck when you run the stty command on the console to change the baud rate
- Re: [tty:tty-testing 31/42] drivers/mmc/core/sdio_uart.c:253:16: error: implicit declaration of function 'UART_LCR_WLEN'; did you mean 'UART_LCR_WLEN5'?
- Re: [PATCH V2] tty: serial: meson: Fix the compile link error reported by kernel test robot
- [PATCH V2] tty: serial: meson: Fix the compile link error reported by kernel test robot
- [RFT v2] tty/sysrq: Make sysrq handler NMI aware
- [tty:tty-testing 30/42] drivers/tty/serial/meson_uart.c:832 meson_uart_probe() warn: 'pclk' not released on lines: 779,785,790,794,799.
- [PATCH] tty: serial: meson: Fix the compile link error reported by kernel test robot
- [PATCH] serial: core: fix tcdrain() with CTS enabled
- Re: [tty:tty-testing 31/42] drivers/mmc/core/sdio_uart.c:253:16: error: implicit declaration of function 'UART_LCR_WLEN'; did you mean 'UART_LCR_WLEN5'?
- [PATCH v4 4/9] serial: sc16is7xx: remove redundant check in rs485_config
- [PATCH v4 7/9] serial: imx: remove redundant assignment in rs485_config
- Move RS485 implementation from drivers to serial core (v4)
- [PATCH v4 1/9] serial: core: move RS485 configuration tasks from drivers into core
- [PATCH v4 6/9] serial: max310: remove redundant memset in rs485_config
- [PATCH v4 9/9] serial: atmel: remove redundant assignment in rs485_config
- [PATCH v4 2/9] serial: amba-pl011: remove redundant code in rs485_config
- [PATCH v4 5/9] serial: omap: remove redundant code in rs485_config
- [PATCH v4 8/9] serial: fsl_lpuart: remove redundant code in rs485_config functions
- [PATCH v4 3/9] serial: stm32: remove redundant code in rs485_config
- RE: [PATCH] dt-bindings: serial: fsl-lpuart: Add imx93 compatible string
- Re: [PATCH v2 2/2] serial: 8250: Report which option to enable for blacklisted PCI devices
- [tty:tty-testing 36/42] drivers/tty/serial/sunplus-uart.c:574:12: error: use of undeclared identifier 'sunplus_uart_console'; did you mean 'sunplus_uart_ops'?
- [syzbot] possible deadlock in __queue_work (2)
- [tty:tty-next] BUILD REGRESSION c2faf737abfb10f88f2d2612d573e9edc3c42c37
- [tty:tty-testing] BUILD REGRESSION 71404f653cf7858fdbb81dd5419a8a4ac4ffa20c
- [tty:tty-testing 30/42] sh4-linux-ld: meson_uart.c:undefined reference to `devm_clk_hw_register_fixed_factor'
- [tty:tty-testing 30/42] meson_uart.c:undefined reference to `__clk_get_name'
- [tty:tty-testing 36/42] drivers/tty/serial/sunplus-uart.c:574:28: error: 'sunplus_uart_console' undeclared here (not in a function); did you mean 'sunplus_uart_ops'?
- Re: [PATCH v2 2/2] serial: 8250: Report which option to enable for blacklisted PCI devices
- [tty:tty-testing] BUILD REGRESSION a6d8f09319fff9e6e7a91cadb19923b8cb2573e0
- Re: [GIT PULL] TTY/Serial driver fixes for 5.17-rc6
- Re: [PATCH v9 0/6] serial: mvebu-uart: Support for higher baudrates
- Re: [PATCH v9 0/6] serial: mvebu-uart: Support for higher baudrates
- [tty:tty-testing 31/42] drivers/mmc/core/sdio_uart.c:253:9: error: implicit declaration of function 'UART_LCR_WLEN'
- [tty:tty-testing 31/42] drivers/mmc/core/sdio_uart.c:253:16: error: implicit declaration of function 'UART_LCR_WLEN'; did you mean 'UART_LCR_WLEN5'?
- Re: [PATCH] dt-bindings: serial: fsl-lpuart: Add imx93 compatible string
- [GIT PULL] TTY/Serial driver fixes for 5.17-rc6
- Re: [PATCH 0/6] sc16is7xx: Hardware flow control fixes
- Re: [PATCH 0/6] sc16is7xx: Hardware flow control fixes
- Aw: Re: [PATCH v3 1/9] serial: core: move RS485 configuration tasks from drivers into core
- Re: [PATCH 1/5] tty: serial: define UART_LCR_WLEN() macro
- Re: [PATCH 0/5] tty: serial: various cleanups
- Re: [PATCH 0/6] sc16is7xx: Hardware flow control fixes
- Re: [PATCH v2 2/2] serial: 8250: Report which option to enable for blacklisted PCI devices
- Re: [PATCH 0/6] sc16is7xx: Hardware flow control fixes
- Re: [RFC PATCH] serial: core: fix tcdrain() with CTS enabled
- Re: [RFC 1/1] tty: n_gsm: improve standard compliance and feature completeness
- [RFC 0/1] tty: n_gsm: improve standard compliance and feature completeness
- [PATCH V7 6/6] tty: serial: meson: Added S4 SOC compatibility
- [PATCH V7 5/6] tty: serial: meson: The system stuck when you run the stty command on the console to change the baud rate
- [PATCH V7 4/6] tty: serial: meson: Make some bit of the REG5 register writable
- [PATCH V7 3/6] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame
- [PATCH V7 2/6] tty: serial: meson: Use devm_ioremap_resource to get register mapped memory
- [PATCH V7 1/6] tty: serial: meson: Move request the register region to probe
- [PATCH V7 0/6] Use CCF to describe the UART baud rate clock
- Re: [PATCH v2] serial: make uart_console_write->putchar()'s character an unsigned char
- Re: [PATCH v9 4/6] dt-bindings: mvebu-uart: update information about UART clock
- Re: [PATCH v9 3/6] serial: mvebu-uart: implement UART clock driver for configuring UART base clock
- Re: [PATCH v9 2/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock
- Re: [PATCH 2/5] tty: serial: make use of UART_LCR_WLEN() + tty_get_char_size()
- Re: [PATCH 1/5] tty: serial: define UART_LCR_WLEN() macro
- [PATCH 4/5] tty: serial: amba-pl010: use more uart_port pointers
- [PATCH 5/5] tty: serial: lpc32xx_hs: use serial_lpc32xx_stop_tx() helper
- [PATCH 0/5] tty: serial: various cleanups
- [PATCH 1/5] tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned
- [PATCH 3/5] tty: serial: serial_txx9: remove struct uart_txx9_port
- [PATCH 2/5] tty: serial: serial_txx9: remove info print from init
- Re: [PATCH 1/5] tty: serial: define UART_LCR_WLEN() macro
- Re: [PATCH 1/5] tty: serial: define UART_LCR_WLEN() macro
- [PATCH 2/5] tty: serial: make use of UART_LCR_WLEN() + tty_get_char_size()
- [PATCH 0/5] UART_LCR_WLEN cleanups
- [PATCH 1/5] tty: serial: define UART_LCR_WLEN() macro
- [PATCH 5/5] mxser: make use of UART_LCR_WLEN() + tty_get_char_size()
- [PATCH 3/5] USB: serial: make use of UART_LCR_WLEN() + tty_get_char_size()
- [PATCH 4/5] sdio_uart: make use of UART_LCR_WLEN() + tty_get_char_size()
- Re: [PATCH v2] serial: make uart_console_write->putchar()'s character an unsigned char
- Re: [PATCH v2] serial: make uart_console_write->putchar()'s character an unsigned char
- [PATCH v3 1/1] serial: 8250_lpss: Balance reference count for PCI DMA device
- [PATCH v2 1/1] serial: 8250_mid: Balance reference count for PCI DMA device
- Re: [PATCH v2 2/2] serial: 8250_lpss: Switch to pcim_iomap() instead of pci_ioremap_bar()
- Re: [PATCH v2 2/2] serial: 8250_lpss: Switch to pcim_iomap() instead of pci_ioremap_bar()
- Re: [PATCH v2 2/2] serial: 8250_lpss: Switch to pcim_iomap() instead of pci_ioremap_bar()
- [PATCH v2] serial: make uart_console_write->putchar()'s character an unsigned char
- Re: [PATCH v2 2/2] serial: 8250_lpss: Switch to pcim_iomap() instead of pci_ioremap_bar()
- Re: [PATCH v2 2/2] serial: 8250_lpss: Switch to pcim_iomap() instead of pci_ioremap_bar()
- Re: [PATCH 00/12] Initial support for Nuclei DemoSoC w/ UX600
- Re: [PATCH v2 2/2] serial: 8250_lpss: Switch to pcim_iomap() instead of pci_ioremap_bar()
- Re: [PATCH 0/2] termbits.h cleanup
- Re: [PATCH 2/2] xtensa: termbits.h is identical to asm-generic one
- [PATCH 2/2] xtensa: termbits.h is identical to asm-generic one
- [PATCH 1/2] ia64: termbits.h is identical to asm-generic one
- [PATCH 0/2] termbits.h cleanup
- [PATCH v2] MAINTAINERS: Add Pali Rohár as mvebu-uart.c maintainer
- [PATCH v9 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
- [PATCH v9 1/2] dt-bindings:serial:Add bindings doc for Sunplus SoC UART Driver
- [PATCH v9 0/2] Add UART driver for Suplus SP7021 SoC
- Re: [PATCH v2 2/2] serial: 8250_lpss: Switch to pcim_iomap() instead of pci_ioremap_bar()
- Re: [PATCH] serial: 8250: Return early in .start_tx() if there are no chars to send
- [tty:tty-testing] BUILD SUCCESS a603ca60cebff8589882427a67f870ed946b3fc8
- [tty:tty-linus] BUILD SUCCESS eebb0f4e894f1e9577a56b337693d1051dd6ebfd
- Re: [PATCH v3 1/9] serial: core: move RS485 configuration tasks from drivers into core
- Re: [PATCH v3 1/9] serial: core: move RS485 configuration tasks from drivers into core
- [PATCH v3 1/9] serial: core: move RS485 configuration tasks from drivers into core
- [PATCH v3 8/9] serial: fsl_lpuart: remove redundant code in rs485_config functions
- Move RS485 implementation from drivers to serial core (v3)
- [PATCH v3 7/9] serial: imx: remove redundant assignment in rs485_config
- [PATCH v3 3/9] serial: stm32: remove redundant code in rs485_config
- [PATCH v3 4/9] serial: sc16is7xx: remove redundant check in rs485_config
- [PATCH v3 5/9] serial: omap: remove redundant code in rs485_config
- [PATCH v3 2/9] serial: amba-pl011: remove redundant code in rs485_config
- [PATCH v3 6/9] serial: max310: remove redundant memset in rs485_config
- [PATCH v3 9/9] serial: atmel: remove redundant assignment in rs485_config
- Re: [PATCH 2 1/9] serial: core: move RS485 configuration tasks from drivers into core
- Re: [PATCH 2 1/9] serial: core: move RS485 configuration tasks from drivers into core
- [PATCH 6/6] sc16is7xx: Set AUTOCTS and AUTORTS bits
- [PATCH 1/6] sc16is7xx: Preserve EFR bits on update
- Re: [PATCH] serial: sh-sci: Simplify multiplication/shift logic
- [PATCH 4.14 03/45] serial: parisc: GSC: fix build when IOSAPIC is not set
- [PATCH 0/6] sc16is7xx: Hardware flow control fixes
- [PATCH 5.10 011/121] serial: parisc: GSC: fix build when IOSAPIC is not set
- [PATCH 4.19 03/58] serial: parisc: GSC: fix build when IOSAPIC is not set
- [PATCH 5/6] sc16is7xx: Handle modem status lines
- [PATCH 3/6] sc16is7xx: Separate GPIOs from modem control lines
- [PATCH 5.4 04/80] serial: parisc: GSC: fix build when IOSAPIC is not set
- [PATCH 2/6] sc16is7xx: Update status lines in single call
- [PATCH 5.16 014/227] serial: parisc: GSC: fix build when IOSAPIC is not set
- Re: [PATCH V6 3/5] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame
- [PATCH] serial: sh-sci: Simplify multiplication/shift logic
- [PATCH 5.15 008/196] serial: parisc: GSC: fix build when IOSAPIC is not set
- Re: [PATCH v3 2/2] serial: 8250: Add proper clock handling for OxSemi PCIe devices
- [PATCH 4/6] sc16is7xx: Properly resume TX after stop
- [PATCH 4.9 03/33] serial: parisc: GSC: fix build when IOSAPIC is not set
- Re: [PATCH V6 4/5] tty: serial: meson: Make some bit of the REG5 register writable
- Re: [PATCH V6 3/5] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame
- Re: [PATCH] MAINTAINERS: Add Pali Rohár as mvebu-uart.c maintainer
- [PATCH v9 5/6] serial: mvebu-uart: implement support for baudrates higher than 230400 Bd
- [PATCH v9 6/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it
- [PATCH v9 3/6] serial: mvebu-uart: implement UART clock driver for configuring UART base clock
- [PATCH v9 4/6] dt-bindings: mvebu-uart: update information about UART clock
- [PATCH v9 2/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock
- [PATCH v9 0/6] serial: mvebu-uart: Support for higher baudrates
- [PATCH v9 1/6] math64: New DIV_U64_ROUND_CLOSEST helper
- Re: [PATCH v8 0/6] serial: mvebu-uart: Support for higher baudrates
- Re: [PATCH 00/12] Initial support for Nuclei DemoSoC w/ UX600
- Re: [PATCH 5/5] spi: make remove callback a void function
- [PATCH 4/7] tty: n_gsm: fix NULL pointer access due to DLCI release
- [PATCH 3/7] tty: n_gsm: fix proper link termination after failed open
- [PATCH 7/7] tty: n_gsm: fix deadlock in gsmtty_open()
- [PATCH 6/7] tty: n_gsm: fix wrong modem processing in convergence layer type 2
- [PATCH 5/7] tty: n_gsm: fix wrong tty control line for flow control
- [PATCH 2/7] tty: n_gsm: fix encoding of command/response bit
- [PATCH 1/7] tty: n_gsm: fix encoding of control signal octet bit DV
- Re: [PATCH 2 4/9] serial: sc16is7xx: remove redundant check in rs485_config
- Re: [PATCH 2 1/9] serial: core: move RS485 configuration tasks from drivers into core
- [PATCH] serial: 8250: Return early in .start_tx() if there are no chars to send
- Re: Opening already open serial port now sets RTS and DTR?
- Re: [PATCH] serial: imx: leave IRTS disabled if using modem-control CTS
- Re: Opening already open serial port now sets RTS and DTR?
- Opening already open serial port now sets RTS and DTR?
- Re: [PATCH 1/1] tty: n_gsm: fix encoding of control signal octet bit DV
- RE: [PATCH 1/1] tty: n_gsm: fix encoding of control signal octet bit DV
- Re: [PATCH v3 2/2] serial: 8250: Add proper clock handling for OxSemi PCIe devices
- Re: [PATCH 1/1] tty: n_gsm: fix encoding of control signal octet bit DV
- Re: [PATCH v3 2/2] serial: 8250: Add proper clock handling for OxSemi PCIe devices
- Re: [PATCH 2 4/9] serial: sc16is7xx: remove redundant check in rs485_config
- Re: [PATCH 2 1/9] serial: core: move RS485 configuration tasks from drivers into core
- RE: [PATCH 1/1] tty: n_gsm: fix encoding of control signal octet bit DV
- Re: [PATCH v2] tty: serial: atmel: add earlycon support
- Re: [PATCH v2] tty: serial: atmel: add earlycon support
- Re: [PATCH 1/1] tty: n_gsm: fix encoding of control signal octet bit DV
- Re: [PATCH v2] tty: serial: atmel: add earlycon support
- [PATCH v2] tty: serial: atmel: add earlycon support
- Re: [PATCH] tty: serial: atmel: add earlycon support
- Re: [PATCH v3 2/2] serial: 8250: Add proper clock handling for OxSemi PCIe devices
- Re: [PATCH 2 9/9] serial: atmel: remove redundant assignment in rs485_config
- Re: [PATCH] tty: serial: atmel: add earlycon support
- [PATCH 1/1] tty: n_gsm: fix deadlock in gsmtty_open()
- [PATCH 1/1] tty: n_gsm: fix wrong tty control line for flow control
- [PATCH 1/1] tty: n_gsm: fix wrong modem processing in convergence layer type 2
- [PATCH 1/1] tty: n_gsm: fix NULL pointer access due to DLCI release
- [PATCH 1/1] tty: n_gsm: fix proper link termination after failed open
- [PATCH 1/1] tty: n_gsm: fix encoding of command/response bit
- [PATCH 1/1] tty: n_gsm: fix encoding of control signal octet bit DV
- Re: [PATCH 2 7/9] serial: imx: remove redundant assignment in rs485_config
- [PATCH] tty: serial: atmel: add earlycon support
- [PATCH v2] sc16is7xx: Fix for incorrect data being transmitted
- Re: [PATCH] sc16is7xx: Fix for incorrect data being transmitted
- Re: [PATCH] sc16is7xx: Fix for incorrect data being transmitted
- [PATCH] sc16is7xx: Fix for incorrect data being transmitted
- Re: [PATCH v2 2/2] serial: 8250_lpss: Switch to pcim_iomap() instead of pci_ioremap_bar()
- Re: [PATCH] serial: imx: leave IRTS disabled if using modem-control CTS
- Re: [PATCH v8 1/2] dt-bindings:serial:Add bindings doc for Sunplus SoC UART Driver
- Move RS485 implementation from drivers to serial core
- [PATCH 2 4/9] serial: sc16is7xx: remove redundant check in rs485_config
- [PATCH 2 8/9] serial: fsl_lpuart: remove redundant code in rs485_config functions
- [PATCH 2 5/9] serial: omap: remove redundant code in rs485_config
- [PATCH 2 7/9] serial: imx: remove redundant assignment in rs485_config
- [PATCH 2 9/9] serial: atmel: remove redundant assignment in rs485_config
- [PATCH 2 2/9] serial: amba-pl011: remove redundant code in rs485_config
- [PATCH 2 3/9] serial: stm32: remove redundant code in rs485_config
- [PATCH 2 6/9] serial: max310: remove redundant memset in rs485_config
- [PATCH 2 1/9] serial: core: move RS485 configuration tasks from drivers into core
- Re: [PATCH] serial: imx: leave IRTS disabled if using modem-control CTS
- [PATCH] serial: 8250: Fix race condition in RTS-after-send handling
- Re: [PATCH v8 1/2] dt-bindings:serial:Add bindings doc for Sunplus SoC UART Driver
- From: Krzysztof Kozlowski
- [PATCH v2 1/2] serial: 8250_lpss: Balance reference count for PCI DMA device
- [PATCH v2 2/2] serial: 8250_lpss: Switch to pcim_iomap() instead of pci_ioremap_bar()
- Re: [PATCH v1 1/1] serial: 8250_mid: Balance reference count for PCI DMA device
- Re: [PATCH v1 1/1] serial: 8250_lpss: Balance reference count for PCI DMA device
- Re: [PATCH v1 1/1] serial: 8250_mid: Balance reference count for PCI DMA device
- Re: [PATCH v1 1/1] serial: 8250_mid: Balance reference count for PCI DMA device
- [PATCH v1 1/1] serial: 8250_mid: Get rid of custom MID_DEVICE() macro
- Re: [PATCH v1 1/1] serial: 8250_mid: Balance reference count for PCI DMA device
- Re: [PATCH v1 1/1] serial: 8250_mid: Balance reference count for PCI DMA device
- [PATCH v1 1/1] serial: 8250_lpss: Balance reference count for PCI DMA device
- Re: [PATCH v1 1/1] serial: 8250_mid: Balance reference count for PCI DMA device
- [PATCH v1 1/1] serial: 8250_mid: Remove unneeded test for ->setup() presence
- [PATCH v1 1/1] serial: 8250_mid: Balance reference count for PCI DMA device
- Re: [PATCH] tty: serial: 8250: add missing pci_dev_put() before return
- [PATCH v8 0/2] Add UART driver for Suplus SP7021 SoC
- [PATCH v8 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
- [PATCH v8 1/2] dt-bindings:serial:Add bindings doc for Sunplus SoC UART Driver
- RE: [PATCH] tty: serial: add missing pci_dev_put() before return
- [PATCH] dt-bindings: serial: fsl-lpuart: Add imx93 compatible string
- Re: [PATCH] tty: serial: add missing pci_dev_put() before return
- Re: [PATCH] tty: serial: add missing pci_dev_put() before return
- Re: [PATCH] serial: imx: leave IRTS disabled if using modem-control CTS
- Re: [PATCH] tty: serial: 8250: add missing pci_dev_put() before return
- Re: [PATCH] tty: serial: 8250: add missing pci_dev_put() before return
- [PATCH] tty: serial: add missing pci_dev_put() before return
- [PATCH] tty: serial: 8250: add missing pci_dev_put() before return
- Re: [PATCH v1 2/2] serial: sh-sci: Switch to use dev_err_probe_ptr()
- [PATCH] serial: imx: leave IRTS disabled if using modem-control CTS
- [tty:tty-testing] BUILD SUCCESS 802d00bd774b77fe132e9e83462b96fb9919411c
- Re: [PATCH v1 2/2] serial: sh-sci: Switch to use dev_err_probe_ptr()
- Re: [PATCH v2] serial: parisc: GSC: fix build when IOSAPIC is not set
- Re: [PATCH] serial: parisc: GSC: fix build when PCI_LBA is not set
- Re: [PATCH 1/9] serial: core: move RS485 configuration tasks from drivers into core
- [PATCH v2] serial: parisc: GSC: fix build when IOSAPIC is not set
- Re: [PATCH] serial: parisc: GSC: fix build when PCI_LBA is not set
- Re: [PATCH 1/9] serial: core: move RS485 configuration tasks from drivers into core
- Re: [PATCH v8 5/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it
- Re: [PATCH 1/9] serial: core: move RS485 configuration tasks from drivers into core
- Re: [PATCH v1 2/2] serial: sh-sci: Switch to use dev_err_probe_ptr()
- Re: [PATCH v1 1/2] driver core: add a wrapper to device probe log helper to return pointer
- [PATCH v1 2/2] serial: sh-sci: Switch to use dev_err_probe_ptr()
- [PATCH v1 1/2] driver core: add a wrapper to device probe log helper to return pointer
- Re: [PATCH] MAINTAINERS: Add Pali Rohár as mvebu-uart.c maintainer
- Re: [PATCH] MAINTAINERS: Add Pali Rohár as mvebu-uart.c maintainer
- Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
- Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
- Re: [PATCH v2 3/3] dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema
- Re: [PATCH v2 2/3] mfd: exynos-lpass: Drop unneeded syscon.h include
- Re: [PATCH] MAINTAINERS: Add Pali Rohár as mvebu-uart.c maintainer
- RE: Reg: Serial port driver for microchip's new PCIe UART device
- From: Kumaravel.Thiagarajan
- [PATCH] MAINTAINERS: Add Pali Rohár as mvebu-uart.c maintainer
- Re: [PATCH] serial: parisc: GSC: fix build when PCI_LBA is not set
- Re: [PATCH] serial: parisc: GSC: fix build when PCI_LBA is not set
- Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
- Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
- Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
- Re: [PATCH v2] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
- Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
- Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
- Re: [PATCH 1/9] serial: core: move RS485 configuration tasks from drivers into core
- RE: [PATCH 1/2] dt-bindings: serial: pl011: Add 'arm,xlnx-uart'
- Re: [PATCH 1/9] serial: core: move RS485 configuration tasks from drivers into core
- Re: [PATCH] serial: parisc: GSC: fix build when PCI_LBA is not set
- [PATCH 1/9] serial: core: move RS485 configuration tasks from drivers into core
- Move RS485 implementation from drivers to serial core
- [PATCH 6/9] serial: max310: remove redundant code in rs485_config
- [PATCH 3/9] serial: stm32: remove redundant code in rs485_config
- [PATCH 5/9] serial: omap: remove redundant code in rs485_config
- [PATCH 4/9] serial: sc16is7xx: remove redundant code in rs485_config
- [PATCH 9/9] serial: atmel: remove redundant assignment in rs485_config
- [PATCH 8/9] serial: fsl_lpuart: remove redundant code in rs485_config functions
- [PATCH 2/9] serial: amba-pl011: remove redundant code in rs485_config
- [PATCH 7/9] serial: imx: remove redundant assignment in rs485_config
- Re: [PATCH] serial: parisc: GSC: fix build when PCI_LBA is not set
- Re: [PATCH v8 3/6] serial: mvebu-uart: implement UART clock driver for configuring UART base clock
- Re: [PATCH] serial: parisc: GSC: fix build when PCI_LBA is not set
- Re: [PATCH] serial: parisc: GSC: fix build when PCI_LBA is not set
- [PATCH] serial: parisc: GSC: fix build when PCI_LBA is not set
- [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
- Re: [GIT PULL] TTY/Serial driver fixes for 5.17-rc4
- [PATCH v2 1/2] serial: 8250: Correct Kconfig help text for blacklisted PCI devices
- [PATCH v2 2/2] serial: 8250: Report which option to enable for blacklisted PCI devices
- [PATCH v2 0/2] serial: 8250: Correct basic issues with the PCI blacklist
- Re: [PATCH v3 2/2] serial: 8250: Add proper clock handling for OxSemi PCIe devices
- Re: Modem control lines for RTSCTS hardware flow control via rts-gpio and cts-gpio with IMX
- Re: [PATCH 2/2] serial: 8250: Report which option to enable for blacklisted PCI devices
- Re: [PATCH 2/2] serial: 8250: Report which option to enable for blacklisted PCI devices
- [GIT PULL] TTY/Serial driver fixes for 5.17-rc4
- [PATCH v3 2/2] serial: 8250: Add proper clock handling for OxSemi PCIe devices
- [PATCH v3 1/2] serial: 8250: Fold EndRun device support into OxSemi Tornado code
- [PATCH v3 0/2] serial: 8250: Fixes for Oxford Semiconductor 950 UARTs
- [PATCH 2/2] serial: 8250: Report which option to enable for blacklisted PCI devices
- [PATCH 1/2] serial: 8250: Correct Kconfig help text for blacklisted PCI devices
- [PATCH 0/2] serial: 8250: Correct basic issues with the PCI blacklist
- Re: [PATCH v2 1/2] serial: 8250: Add proper clock handling for OxSemi PCIe devices
- [PATCH v3] serial: 8250_aspeed_vuart: replace snprintf with sysfs_emit
- [tty:tty-testing] BUILD SUCCESS ad30d108a5135af584ff47f5ff81be971b6c26f1
- Re: [PATCH v2] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
- [no subject]
- [PATCH v8 3/6] serial: mvebu-uart: implement UART clock driver for configuring UART base clock
- [PATCH v8 5/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it
- [PATCH v8 6/6] serial: mvebu-uart: implement support for baudrates higher than 230400 Bd
- [PATCH v8 4/6] dt-bindings: mvebu-uart: update information about UART clock
- [PATCH v8 2/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock
- [PATCH v8 1/6] math64: New DIV_U64_ROUND_CLOSEST helper
- [PATCH v8 0/6] serial: mvebu-uart: Support for higher baudrates
- Re: Reg: Serial port driver for microchip's new PCIe UART device
- Re: [PATCH v2 1/3] serial: 8250: Handle UART without interrupt on TEMT using em485
- Re: [PATCH v2] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
- [PATCH v2] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
- Re: [RESEND v4 02/10] arm64: dts: freescale: Add the top level dtsi support for imx8dxl
- Re: [RESEND v4 05/10] arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi
- Re: Modem control lines for RTSCTS hardware flow control via rts-gpio and cts-gpio with IMX
- Re: [RESEND v4 08/10] arm64: dts: imx8dxl: Add i.MX8DXL evk board support
- Re: [PATCH] dt-bindings: serial: fsl-lpuart: Remove i.MX8QM from enum
- Re: [PATCH 1/2] dt-bindings: serial: fsl-lpuart: Drop i.MX8QXP backwards compatibility
- [PATCH v2 2/2] dt-bindings: serial: fsl-lpuart: Remove i.MX8QM from enum
- [PATCH v2 1/2] dt-bindings: serial: fsl-lpuart: Drop i.MX8QXP backwards compatibility
- Re: [PATCH v2] serial: 8259_aspeed_vuart: replace snprintf with sysfs_emit
- Re: [PATCH v2] serial: 8259_aspeed_vuart: replace snprintf with sysfs_emit
- Re: [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
- Re: [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
- RE: Reg: Serial port driver for microchip's new PCIe UART device
- From: Kumaravel.Thiagarajan
- [PATCH v2] serial: 8259_aspeed_vuart: replace snprintf with sysfs_emit
- Re: [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
- Re: [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
- Re: [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
- Re: [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
- [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
- Re: [PATCH] tty: serial: imx: Add fast path when rs485 delays are 0
- Re: [PATCH 1/2] dt-bindings: serial: fsl-lpuart: Drop i.MX8QXP backwards compatibility
- Re: Reg: Serial port driver for microchip's new PCIe UART device
- Re: [PATCH v7 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
- Reg: Serial port driver for microchip's new PCIe UART device
- From: Kumaravel.Thiagarajan
- Re: [PATCH] serial: 8259: replace snprintf with sysfs_emit
- Re: [PATCH] fix serdev bind/unbind
- Re: [PATCH 1/2] dt-bindings: serial: fsl-lpuart: Drop i.MX8QXP backwards compatibility
- Re: [PATCH 06/12] dt-bindings: serial: add compatible string for Nuclei DemoSoC UART
- Re: [PATCH 01/12] dt-bindings: vendor-prefixes: add Nuclei
- Re: [PATCH 08/12] dt-bindings: riscv: add binding for Nuclei platform boards
- Re: [PATCH 03/12] dt-bindings: riscv: add compatible strings for Nuclei UX600 series
- Re: [PATCH 07/12] dt-bindings: spi: add compatible string for Nuclei DemoSoC SPI
- Re: [PATCH 05/12] dt-bindings: interrupt-controller: add compatible string for UX600 PLIC
- Re: [PATCH 04/12] dt-bindings: timer: add compatible for Nuclei UX600 CLINT-compat timer
- Re: [PATCH] dt-bindings: serial: fsl-lpuart: Remove i.MX8QM from enum
- Re: [PATCH 1/2] dt-bindings: serial: fsl-lpuart: Drop i.MX8QXP backwards compatibility
- [PATCH] serial: 8259: replace snprintf with sysfs_emit
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
[Linux Kernel for ARM]