Not all LSR register flags are preserved across reads. Therefore, LSR
readers must store the non-preserved bits into lsr_save_flags.
This fix was initially mixed into feature commit f6f586102add ("serial:
8250: Handle UART without interrupt on TEMT using em485"). However,
that feature change had a flaw and it was reverted to make room for
simpler approach providing the same feature. The embedded fix got
reverted with the feature change.
Re-add the lsr_save_flags fix and properly mark it's a fix.
Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250")
Link: https://lore.kernel.org/all/1d6c31d-d194-9e6a-ddf9-5f29af829f3@xxxxxxxxxxxxxxx/T/#m1737eef986bd20cf19593e344cebd7b0244945fc
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
Since Uwe didn't follow up with this fix in an isolated patch, I'm sending
it now so that it doesn't end up falling through cracks.
drivers/tty/serial/8250/8250_port.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 5591f18f2ea9..25f3dff9fe25 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1517,6 +1517,8 @@ static inline void __stop_tx(struct uart_8250_port *p)
unsigned char lsr = serial_in(p, UART_LSR);
u64 stop_delay = 0;
+ p->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+
if (!(lsr & UART_LSR_THRE))
return;
/*
--
tg: (4419da5d5d4b..) fix/lsr-save-flags (depends on: tty-next)
