[PATCH 5/5] serial: jsm: Use B0 instead of 0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use B0 to check zero baudrate rather than literal 0.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
 drivers/tty/serial/jsm/jsm_cls.c | 2 +-
 drivers/tty/serial/jsm/jsm_neo.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/jsm/jsm_cls.c b/drivers/tty/serial/jsm/jsm_cls.c
index 046b624e5f71..ca05e84a7c90 100644
--- a/drivers/tty/serial/jsm/jsm_cls.c
+++ b/drivers/tty/serial/jsm/jsm_cls.c
@@ -689,7 +689,7 @@ static void cls_param(struct jsm_channel *ch)
 	/*
 	 * If baud rate is zero, flush queues, and set mval to drop DTR.
 	 */
-	if ((ch->ch_c_cflag & (CBAUD)) == 0) {
+	if ((ch->ch_c_cflag & (CBAUD)) == B0) {
 		ch->ch_r_head = 0;
 		ch->ch_r_tail = 0;
 		ch->ch_e_head = 0;
diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index 0cf586c10688..95bebf2a73d3 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -938,7 +938,7 @@ static void neo_param(struct jsm_channel *ch)
 	/*
 	 * If baud rate is zero, flush queues, and set mval to drop DTR.
 	 */
-	if ((ch->ch_c_cflag & (CBAUD)) == 0) {
+	if ((ch->ch_c_cflag & (CBAUD)) == B0) {
 		ch->ch_r_head = ch->ch_r_tail = 0;
 		ch->ch_e_head = ch->ch_e_tail = 0;
 
-- 
2.30.2




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux