RE: [PATCH v4 1/2] dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

On 11 May 2022 16:04 Rob Herring wrote:
> On Wed, May 04, 2022 at 10:44:55AM +0100, Phil Edworthy wrote:
> > The RZ/V2M SoC has an additional clock to access the registers. The HW
> > manual says this clock should not be touched as it is used by the
> > "ISP Firmware".
> >
> > Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
> > Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> > ---
> > v4:
> >  - Removed "optional" from description of clock to access the registers
> > v3:
> >  - New patch added
> > ---
> >  .../bindings/serial/renesas,em-uart.yaml      | 32 +++++++++++++++----
> >  1 file changed, 25 insertions(+), 7 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/serial/renesas,em-
> uart.yaml b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
> > index 332c385618e1..40a03f255666 100644
> > --- a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
> > +++ b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
> > @@ -9,9 +9,6 @@ title: Renesas EMMA Mobile UART Interface
> >  maintainers:
> >    - Magnus Damm <magnus.damm@xxxxxxxxx>
> >
> > -allOf:
> > -  - $ref: serial.yaml#
> > -
> >  properties:
> >    compatible:
> >      oneOf:
> > @@ -29,11 +26,32 @@ properties:
> >    interrupts:
> >      maxItems: 1
> >
> > -  clocks:
> > -    maxItems: 1
> > +allOf:
> > +  - $ref: serial.yaml#
> >
> > -  clock-names:
> > -    const: sclk
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: renesas,r9a09g011-uart
> > +    then:
> > +      properties:
> 
> > +        clocks:
> > +          items:
> > +            - description: UART functional clock
> > +            - description: Internal clock to access the registers
> > +        clock-names:
> > +          items:
> > +            - const: sclk
> > +            - const: pclk
> 
> Better to put all this at the top level with 'minItems: 1' and then use
> minItems/maxItems in the if/then schema to define which platforms have 1
> or 2 clocks.

Thanks Rob, will do!
Phil


> > +    else:
> > +      properties:
> > +        clocks:
> > +          items:
> > +            - description: UART functional clock
> > +        clock-names:
> > +          items:
> > +            - const: sclk
> >
> >  required:
> >    - compatible
> > --
> > 2.32.0
> >
> >




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux