Linux Rockchip - Date Index
[Prev Page][Next Page]
- [PATCH v7 1/5] clk: rockchip: RK3288: add suspend and resume
- [PATCH v7 4/5] ARM: dts: add RK3288 suspend support
- [PATCH v2] usb: dwc2: add bus suspend/resume for dwc2
- [PATCH v6] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- [PATCH v3] usb: dwc2: add bus suspend/resume for dwc2
- [PATCH v2] usb: dwc2: add bus suspend/resume for dwc2
- [PATCH V5 1/7] imx-drm: imx-hdmi: split imx soc specific code from imx-hdmi
- [PATCH V5 1/7] imx-drm: imx-hdmi: split imx soc specific code from imx-hdmi
- From: Zubair Lutfullah Kakakhel
- [PATCH V5 7/7] dt-bindings: add document for dw-hdmi
- [PATCH V5 7/7] dt-bindings: add document for dw-hdmi
- From: Zubair Lutfullah Kakakhel
- [PATCH V5 7/7] dt-bindings: add document for dw-hdmi
- [PATCH V5 3/7] dw-hdmi: make checkpatch happy
- [PATCH V5 3/7] dw-hdmi: make checkpatch happy
- [PATCH V5 3/7] dw-hdmi: make checkpatch happy
- From: Zubair Lutfullah Kakakhel
- [PATCH V5 7/7] dt-bindings: add document for dw-hdmi
- From: Zubair Lutfullah Kakakhel
- [PATCH V5 7/7] dt-bindings: add document for dw-hdmi
- [PATCH V5 6/7] dw-hdmi: convert dw-hdmi to drm_bridge mode
- [PATCH V5 5/7] dw-hdmi: add support for multi byte register width access
- [PATCH V5 4/7] dw-hdmi: return defer if can't get ddc i2c adapter
- [PATCH V5 3/7] dw-hdmi: make checkpatch happy
- [PATCH V5 2/7] dw-hdmi: move imx-hdmi to bridge/dw-hdmi
- [PATCH V5 1/7] imx-drm: imx-hdmi: split imx soc specific code from imx-hdmi
- [PATCH V5 0/7]dw-hdmi: convert imx hdmi to bridge/dw-hdmi
- [PATCH V4 5/6] dw-hdmi: add support for multi byte register width access
- [PATCH v2] clk: Propagate prepare and enable when reparenting orphans
- [PATCH] clk: Propagate prepare and enable when reparenting orphans
- [PATCH] ARM: dts: rockchip: fix invalid unit-address in rk3188.dtsi
- [PATCH] clk: Propagate prepare and enable when reparenting orphans
- From: Russell King - ARM Linux
- [PATCH] clk: Propagate prepare and enable when reparenting orphans
- [PATCH v17 1/5] thermal: rockchip: add driver for thermal
- [PATCH] clk: Propagate prepare and enable when reparenting orphans
- From: Russell King - ARM Linux
- [PATCH] clk: Propagate prepare and enable when reparenting orphans
- [PATCH v7 0/5] This is the 1st version of suspend for RK3288.
- [PATCH] clk: rockchip: fix rk3188 hsadc_frac definition
- [PATCH] clk: Propagate prepare and enable when reparenting orphans
- From: Russell King - ARM Linux
- [PATCH] clk: Propagate prepare and enable when reparenting orphans
- [PATCH] ARM: dts: rockchip: add pinctrl nodes for SPDIF, LCDC, CIF, HDMI, USB and GPS
- [PATCH] ARM: dts: rockchip: add pinctrl nodes for SPDIF, LCDC, CIF, HDMI, USB and GPS
- [PATCH v7 5/5] ARM: dts: add suspend voltage setting for RK808
- [PATCH v7 4/5] ARM: dts: add RK3288 suspend support
- [PATCH v7 3/5] ARM: rockchip: Add pmu-sram binding
- [PATCH v7 2/5] ARM: rockchip: add suspend and resume for RK3288
- [PATCH v7 1/5] clk: rockchip: RK3288: add suspend and resume
- [PATCH v7 0/5] This is the 1st version of suspend for RK3288.
- [PATCH V4 5/6] dw-hdmi: add support for multi byte register width access
- [PATCH V4 6/6] dw-hdmi: convert dw-hdmi to drm_bridge mode
- [PATCH V4 5/6] dw-hdmi: add support for multi byte register width access
- [PATCH V4 4/6] dw-hdmi: return defer if can't get ddc i2c adapter
- [PATCH V4 3/6] dw-hdmi: make checkpatch happy
- [PATCH V4 2/6] dw-hdmi: move imx-hdmi to bridge/dw-hdmi
- [PATCH V4 1/6] imx-drm: imx-hdmi: split imx soc specific code from imx-hdmi
- [PATCH V4 0/6] dw-hdmi: make imx hdmi publicly used by dw hdmi compatible platform
- [PATCH v9 3/3] ARM: dts: add rk3288 power-domain node
- [PATCH v9 2/3] power-domain: rockchip: add power doamin driver
- [PATCH v9 1/3] dt-bindings: add document of Rockchip power domain
- [PATCH v9 0/3] ARM: rk3288: Add PM Domain support
- [PATCH V2 1/2] imx-drm: imx-hdmi: split imx soc specific code from imx-hdmi
- [PATCH 1/2] imx-drm: imx-hdmi: split imx soc specific code from imx-hdmi
- [PATCH V3 4/4] dw-hdmi: convert dw-hdmi to drm_bridge mode
- [PATCH v17 1/5] thermal: rockchip: add driver for thermal
- [PATCH v17 1/5] thermal: rockchip: add driver for thermal
- [PATCH v2] usb: dwc2: add bus suspend/resume for dwc2
- [PATCH 0/5] clk: rockchip: add full support for HDMI clock on rk3288
- [PATCH v2] usb: dwc2: add bus suspend/resume for dwc2
- [PATCH v2] usb: dwc2: add bus suspend/resume for dwc2
- [PATCH v2] usb: dwc2: add bus suspend/resume for dwc2
- [PATCH v2] usb: dwc2: add bus suspend/resume for dwc2
- [PATCH V3 4/4] dw-hdmi: convert dw-hdmi to drm_bridge mode
- [PATCH v8 1/3] power-domain: rockchip: add power domain drivers
- [PATCH v8 3/3] ARM: dts: add rk3288 power-domain node
- [PATCH V3 4/4] dw-hdmi: convert dw-hdmi to drm_bridge mode
- [PATCH V3 3/4] dw-hdmi: add support for multi byte register width access
- [PATCH V3 2/4] dw-hdmi: move imx-hdmi to bridge/dw-hdmi
- [PATCH V3 1/4] imx-drm: imx-hdmi: split imx soc specific code from imx-hdmi
- [PATCH V3 0/4] dw-hdmi: make imx hdmi publicly used by dw hdmi compatible platform
- [PATCH 0/2] make imx hdmi publicly used by dw hdmi compatible platform
- From: Russell King - ARM Linux
- [PATCH 0/2] make imx hdmi publicly used by dw hdmi compatible platform
- [PATCH v8 1/3] power-domain: rockchip: add power domain drivers
- [PATCH v8 3/3] ARM: dts: add rk3288 power-domain node
- [PATCH] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C spec
- [PATCH v8 3/3] ARM: dts: add rk3288 power-domain node
- [PATCH v8 2/3] dt-bindings: add document of Rockchip power domain
- [PATCH v8 1/3] power-domain: rockchip: add power domain drivers
- [PATCH v8 0/3] ARM: rk3288 : Add PM Domain support
- [PATCH 0/7] Pinctrl support for Zynq
- [PATCH 0/7] Pinctrl support for Zynq
- [PATCH v2] usb: dwc2: add bus suspend/resume for dwc2
- [PATCH v7 3/3] ARM: dts: rk3288: add VOP iommu nodes
- [PATCH 2/7] pinctrl: pinconf-generic: Infer map type from DT property
- [PATCH 2/7] pinctrl: pinconf-generic: Infer map type from DT property
- [PATCH 5/7] pinctrl: Add driver for Zynq
- [PATCH 5/7] pinctrl: Add driver for Zynq
- [PATCH 4/7] pinctrl: zynq: Document DT binding
- [PATCH 0/7] Pinctrl support for Zynq
- [PATCH 2/7] pinctrl: pinconf-generic: Infer map type from DT property
- [PATCH 1/2] imx-drm: imx-hdmi: split imx soc specific code from imx-hdmi
- [PATCH V2 1/2] imx-drm: imx-hdmi: split imx soc specific code from imx-hdmi
- From: Zubair Lutfullah Kakakhel
- [PATCH V2 1/2] imx-drm: imx-hdmi: split imx soc specific code from imx-hdmi
- [PATCH V2 2/2] move imx-hdmi to bridge/dw-hdmi
- [PATCH 1/2] imx-drm: imx-hdmi: split imx soc specific code from imx-hdmi
- [PATCH V2 0/2] make imx hdmi publicly used by dw hdmi compatible platform
- [v17,1/5] thermal: rockchip: add driver for thermal
- [PATCH 2/2] move imx-hdmi to bridge/dw-hdmi
- [PATCH v2] clk: rockchip: change hierarchy for some clocks
- [PATCH 0/7] Pinctrl support for Zynq
- [PATCH 5/7] pinctrl: Add driver for Zynq
- [PATCH 4/7] pinctrl: zynq: Document DT binding
- [PATCH 5/7] pinctrl: Add driver for Zynq
- [PATCH 0/2] make imx hdmi publicly used by dw hdmi compatible platform
- [PATCH 2/2] move imx-hdmi to bridge/dw-hdmi
- [PATCH] clk: rockchip: change hierarchy for some clocks
- [GIT PULL 1/2] first bunch on Rockchip dt changes
- [GIT PULL 2/2] cpufreq-dt platform device
- [PATCH v5] clk: rockchip: disable unused clocks
- [PATCH] clk: rockchip: change hierarchy for some clocks
- [PATCH v5] clk: rockchip: disable unused clocks
- [PATCH 2/2] move imx-hdmi to bridge/dw-hdmi
- [PATCH 0/2] make imx hdmi publicly used by dw hdmi compatible platform
- From: Russell King - ARM Linux
- [PATCH 1/2] imx-drm: imx-hdmi: split imx soc specific code from imx-hdmi
- From: Zubair Lutfullah Kakakhel
- [PATCH v4] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH 2/2] move imx-hdmi to bridge/dw-hdmi
- From: Zubair Lutfullah Kakakhel
- [PATCH 2/2] move imx-hdmi to bridge/dw-hdmi
- [PATCH 1/2] imx-drm: imx-hdmi: split imx soc specific code from imx-hdmi
- [PATCH 0/2] make imx hdmi publicly used by dw hdmi compatible platform
- [PATCH v2] serial: 8250_dw: get index of serial line from DT aliases
- [PATCH v5] clk: rockchip: disable unused clocks
- [PATCH 5/5] clk: rockchip: change DCLK_VOP0 to use new COMPOSITE_DIVOPS
- [PATCH 4/5] clk: rockchip: add the vop_determine_rate for vop dclock
- [PATCH 3/5] clk: rockchip: introduce the div_ops handling for composite branches
- [PATCH 1/5] clk: rockchip: add some clock rate into rate table for rk3288
- [PATCH 0/5] clk: rockchip: add full support for HDMI clock on rk3288
- [GIT PULL v2 2/2] ARM: rockchip: cpufreq-cpu0 device
- [PATCH v3] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH v3] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [RFC PATCH 1/2] pinctrl: Add output-disable
- [PATCH 3/7] pinctrl: pinconf-generic: Allow driver to specify DT params
- [PATCH 7/7] ARM: zynq: DT: Add pinctrl information
- [PATCH 6/7] ARM: zynq: Enable pinctrl
- [PATCH 5/7] pinctrl: Add driver for Zynq
- [PATCH 4/7] pinctrl: zynq: Document DT binding
- [PATCH 3/7] pinctrl: pinconf-generic: Allow driver to specify DT params
- [PATCH 2/7] pinctrl: pinconf-generic: Infer map type from DT property
- [PATCH 1/7] pinctrl: pinconf-generic: Declare dt_params/conf_items const
- [PATCH 0/7] Pinctrl support for Zynq
- [PATCH v4] clk: rockchip: disable unused clocks
- [GIT PULL] pinctrl: rockchip: fixes and suspend support
- [PATCH 2/2] regulator: of: Add support for parsing microvolts for suspend state
- [PATCH 2/2] regulator: of: Add support for parsing microvolts for suspend state
- From: Javier Martinez Canillas
- [PATCH 1/2] regulator: Document binding for regulator suspend voltage
- [PATCH 2/2] regulator: of: Add support for parsing microvolts for suspend state
- [PATCH] ASoC: simple-card: add "invert" property for detect GPIOs
- [PATCH v2] ASoC: rockchip: i2s: add text after tristate for SND_SOC_ROCKCHIP_I2S
- [PATCH v3] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH v3] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH v3] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH v7 3/3] ARM: dts: rk3288: add VOP iommu nodes
- [PATCH v7 1/3] iommu/rockchip: rk3288 iommu driver
- [PATCH v3] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH v2] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH 2/2] regulator: of: Add support for parsing microvolts for suspend state
- [PATCH 1/2] regulator: Document binding for regulator suspend voltage
- [GIT PULL] pinctrl: rockchip: fixes and suspend support
- [PATCH v6 1/7] pinctrl: rockchip: add suspend/resume functions
- [PATCH v5 0/6] add basic rk3288 smp support
- [PATCH v3 0/2] ARM: dts: rockchip: EMAC Rockchip for RK3066 SoCs and MarsBoard RK3066
- [PATCH] ARM: dts: rockchip: add serial aliases for rk3066 and rk3188
- [PATCH v3 2/2] ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066
- [PATCH v3 1/2] ARM: dts: rockchip: Add EMAC Rockchip for RK3066 SoCs
- [PATCH v3 0/2] ARM: dts: rockchip: EMAC Rockchip for RK3066 SoCs and MarsBoard RK3066
- 3.18-rc2 boot failure on Radxa Rock in dw_mmc
- 3.18-rc2 boot failure on Radxa Rock in dw_mmc
- 3.18-rc2 boot failure on Radxa Rock in dw_mmc
- [PATCH v4] clk: rockchip: disable unused clocks
- [PATCH 2/2] regulator: of: Add support for parsing microvolts for suspend state
- From: Javier Martinez Canillas
- [PATCH 1/2] regulator: Document binding for regulator suspend voltage
- From: Javier Martinez Canillas
- [PATCH 2/2] regulator: of: Add support for parsing microvolts for suspend state
- [PATCH 1/2] regulator: Document binding for regulator suspend voltage
- [PATCH] ASoC: simple-card: add "invert" property for detect GPIOs
- [PATCH v2] ASoC: rockchip: i2s: add text after tristate for SND_SOC_ROCKCHIP_I2S
- [PATCH v17 5/5] ARM: dts: enable Thermal on rk3288-evb board
- [PATCH v17 4/5] ARM: dts: add main Thermal info to rk3288
- [PATCH v17 3/5] ARM: dts: add RK3288 Thermal data
- [PATCH v17 2/5] dt-bindings: document Rockchip thermal
- [PATCH v17 1/5] thermal: rockchip: add driver for thermal
- [PATCH v17 0/5] Rockchip soc thermal driver
- [PATCH v3] clk: rockchip: disable unused clocks
- [PATCH v6 1/7] pinctrl: rockchip: add suspend/resume functions
- [PATCH v7 0/3] ARM: rk3288 : Add PM Domain support
- [PATCH] ASoC: rockchip-i2s: add rockchip-max98090 driver support
- [PATCH v7 0/3] ARM: rk3288 : Add PM Domain support
- [PATCH] usb: dwc2: add bus suspend/resume for dwc2
- [PATCH v2] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH] usb: dwc2: add bus suspend/resume for dwc2
- [PATCH] usb: dwc2: add bus suspend/resume for dwc2
- [PATCH v2] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH] clk: rockchip: change hierarchy for some clocks
- [RFC PATCH 1/2] pinctrl: Add output-disable
- [PATCH v2] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH v5 1/6] pinctrl: rockchip: add suspend/resume functions
- [PATCH v2] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH v3] clk: rockchip: disable unused clocks
- [PATCH v2] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH v16 2/5] dt-bindings: document Rockchip thermal
- [PATCH v2] clk: rockchip: disable unused clocks
- [PATCH v2] clk: rockchip: disable unused clocks
- [PATCH v16 2/5] dt-bindings: document Rockchip thermal
- [PATCH v1 4/4] ARM: dts: rockchip: Enable emac node in rk3066a-marsboard
- [PATCH v2 1/4] ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066
- [PATCH v2] clk: rockchip: disable unused clocks
- [PATCH] ARM: dts: rockchip: add serial aliases for rk3066 and rk3188
- [PATCH] serial: 8250_dw: get index of serial line from DT aliases
- [PATCH v2] clk: rockchip: disable unused clocks
- [PATCH] clk: rockchip: fix rk3188 hsadc_frac definition
- [PATCH] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH] mmc: dw_mmc: add support for the other bit of sdio interrupt
- [PATCH v5 2/6] pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume
- [PATCH] mmc: dw_mmc: add a quirk for the defferent bit of sdio interrupt
- [PATCH] mmc: dw_mmc: add a quirk for the defferent bit of sdio interrupt
- [PATCH] mmc: dw_mmc: add a quirk for the defferent bit of sdio interrupt
- [PATCH] mmc: dw_mmc: add a quirk for the defferent bit of sdio interrupt
- [PATCH] clk: rockchip: disable unused clocks
- [PATCH] mmc: dw_mmc: add a quirk for the defferent bit of sdio interrupt
- [PATCH] clk: rockchip: disable unused clocks
- [PATCH v6 7/7] ARM: dts: add suspend voltage setting for RK808
- From: Javier Martinez Canillas
- [PATCH v6 0/7] This is the 1st version of suspend for RK3288.
- [PATCH] clk: rockchip: disable unused clocks
- [PATCH v6 0/7] This is the 1st version of suspend for RK3288.
- [PATCH v2 1/4] pinctrl: rockchip: Set wake_enabled
- [PATCH] clk: rockchip: disable unused clocks
- [PATCH v6 0/7] This is the 1st version of suspend for RK3288.
- [PATCH v5 2/6] pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume
- [PATCH v6 4/7] ARM: rockchip: add suspend and resume for RK3288
- [PATCH] clk: rockchip: change PLL setting for better clock jitter
- [PATCH v6 4/7] ARM: rockchip: add suspend and resume for RK3288
- [PATCH] clk: rockchip: disable unused clocks
- [PATCH v6 4/7] ARM: rockchip: add suspend and resume for RK3288
- [PATCH] clk: rockchip: change PLL setting for better clock jitter
- [PATCH v6 7/7] ARM: dts: add suspend voltage setting for RK808
- [PATCH v6 7/7] ARM: dts: add suspend voltage setting for RK808
- From: Javier Martinez Canillas
- [PATCH v5 2/6] pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume
- [GIT PULL 2/2] cpufreq-dt platform device
- [GIT PULL 1/2] first bunch on Rockchip dt changes
- [PATCH v6 7/7] ARM: dts: add suspend voltage setting for RK808
- [PATCH v2] ARM: dts: rockchip: use internal pull-up resistors on I2C busses
- [PATCH v2] ARM: dts: rockchip: use internal pull-up resistors on I2C busses
- From: NEO-Technologies / Julien CHAUVEAU
- [PATCH v5 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v2] ARM: dts: rockchip: use internal pull-up resistors on I2C busses
- [PATCH v2] ARM: dts: rockchip: use internal pull-up resistors on I2C busses
- [PATCH v2] ARM: dts: rockchip: use internal pull-up resistors on I2C busses
- [PATCH v6 7/7] ARM: dts: add suspend voltage setting for RK808
- [PATCH v6 6/7] ARM: dts: add RK3288 suspend support
- [PATCH v6 5/7] ARM: rockchip: Add pmu-sram binding
- [PATCH v6 4/7] ARM: rockchip: add suspend and resume for RK3288
- [PATCH v6 3/7] clk: rockchip: RK3288: add suspend and resume
- [PATCH v6 2/7] pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume
- [PATCH v6 1/7] pinctrl: rockchip: add suspend/resume functions
- [PATCH v6 0/7] This is the 1st version of suspend for RK3288.
- [PATCH] ASoC: rockchip-i2s: fix infinite loop in rockchip_snd_rxctrl
- [PATCH] clk: rockchip: disable unused clocks
- [PATCH v2] ARM: dts: rockchip: use internal pull-up resistors on I2C busses
- From: NEO-Technologies / Julien CHAUVEAU
- [PATCH] ASoC: rockchip-i2s: fix infinite loop in rockchip_snd_rxctrl
- [PATCH v2] ARM: dts: rockchip: use internal pull-up resistors on I2C busses
- [PATCH v15 2/5] dt-bindings: document Rockchip thermal
- [PATCH v15 1/5] thermal: rockchip: add driver for thermal
- [PATCH v16 5/5] ARM: dts: enable Thermal on rk3288-evb board
- [PATCH v16 4/5] ARM: dts: add main Thermal info to rk3288
- [PATCH v16 3/5] ARM: dts: add RK3288 Thermal data
- [PATCH v16 2/5] dt-bindings: document Rockchip thermal
- [PATCH v16 1/5] thermal: rockchip: add driver for thermal
- [PATCH v16 0/5] Rockchip soc thermal driver
- [PATCH v7 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v15 2/5] dt-bindings: document Rockchip thermal
- [PATCH v15 1/5] thermal: rockchip: add driver for thermal
- [RFC PATCH 2/2] pinctrl: rockchip: Implement PIN_CONFIG_OUTPUT_DISABLE
- [RFC PATCH 1/2] pinctrl: Add output-disable
- [PATCH v2 3/4] pinctrl: rockchip: Parse pin groups before calling pinctrl_register()
- [PATCH v4 1/6] pinctrl: rockchip: add suspend/resume functions
- [PATCH 1/4] pinctrl: rockchip: Set wake_enabled
- [PATCH v3 2/6] pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume
- [PATCH v3 2/6] pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume
- [PATCH 1/4] pinctrl: rockchip: Set wake_enabled
- [PATCH v5 6/6] ARM: dts: add RK3288 suspend support
- [PATCH v5 6/6] ARM: dts: add RK3288 suspend support
- [PATCH v5 3/6] clk: rockchip: RK3288: add suspend and resume
- [PATCH v5 2/6] pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume
- [PATCH v1 4/4] ARM: dts: rockchip: Enable emac node in rk3066a-marsboard
- [PATCH v1 3/4] ARM: dts: rockchip: Add EMAC Rockchip for RK3066 SoCs
- [PATCH v2 2/4] dt-bindings: Document Marsboard RK3066 in Rockchip platforms dt-bindings
- [PATCH v2 1/4] ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066
- [PATCH v2] ARM: dts: rockchip: use internal pull-up resistors on I2C busses
- [PATCH v15 5/5] ARM: dts: enable Thermal on rk3288-evb board
- [PATCH v15 4/5] ARM: dts: add main Thermal info to rk3288
- [PATCH v15 3/5] ARM: dts: add RK3288 Thermal data
- [PATCH v15 2/5] dt-bindings: document Rockchip thermal
- [PATCH v15 1/5] thermal: rockchip: add driver for thermal
- [PATCH v15 0/5] Rockchip soc thermal driver
- [PATCH v5 3/6] clk: rockchip: RK3288: add suspend and resume
- [PATCH v14 1/5] thermal: rockchip: add driver for thermal
- [PATCH v5 3/6] clk: rockchip: RK3288: add suspend and resume
- [PATCH v14 2/5] dt-bindings: document Rockchip thermal
- [PATCH v14 2/5] dt-bindings: document Rockchip thermal
- [PATCH v14 1/5] thermal: rockchip: add driver for thermal
- [PATCH v14 2/5] dt-bindings: document Rockchip thermal
- [PATCH v14 5/5] ARM: dts: enable Thermal on rk3288-evb board
- [PATCH v14 4/5] ARM: dts: add main Thermal info to rk3288
- [PATCH v14 3/5] ARM: dts: add RK3288 Thermal data
- [PATCH v7 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v5 1/6] pinctrl: rockchip: add suspend/resume functions
- [PATCH v5 5/6] ARM: rockchip: Add pmu-sram binding
- [PATCH v5 6/6] ARM: dts: add RK3288 suspend support
- [PATCH v4 5/6] ARM: rockchip: Add pmu-sram binding
- [PATCH v5 4/6] ARM: rockchip: add suspend and resume for RK3288
- [PATCH v3 4/6] ARM: rockchip: add suspend and resume for RK3288
- [PATCH v5 3/6] clk: rockchip: RK3288: add suspend and resume
- [PATCH v5 1/6] pinctrl: rockchip: add suspend/resume functions
- [PATCH] mmc: dw_mmc: rockchip: Don't recalc the clock when it goes off
- [PATCH v5 6/6] ARM: dts: add RK3288 suspend support
- [PATCH v5 5/6] ARM: rockchip: Add pmu-sram binding
- [PATCH v5 4/6] ARM: rockchip: add suspend and resume for RK3288
- [PATCH v5 3/6] clk: rockchip: RK3288: add suspend and resume
- [PATCH v5 2/6] pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume
- [PATCH v5 1/6] pinctrl: rockchip: add suspend/resume functions
- [PATCH v5 0/6] This is the 1st version of suspend for RK3288.
- [PATCH v1 1/4] ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066
- [PATCH] ARM: dts: rockchip: use internal pull-up resistors on I2C busses
- From: NEO-Technologies / Julien CHAUVEAU
- [PATCH v1 1/4] ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066
- From: NEO-Technologies / Julien CHAUVEAU
- [PATCH v14 5/5] ARM: dts: enable Thermal on rk3288-evb board
- [PATCH v14 4/5] ARM: dts: add main Thermal info to rk3288
- [PATCH v14 3/5] ARM: dts: add RK3288 Thermal data
- [PATCH v14 2/5] dt-bindings: document Rockchip thermal
- [PATCH v14 1/5] thermal: rockchip: add driver for thermal
- [PATCH v14 0/5] Rockchip soc thermal driver
- [PATCH] ARM: dts: rockchip: use internal pull-up resistors on I2C busses
- [PATCH v1 4/4] ARM: dts: rockchip: Enable emac node in rk3066a-marsboard
- [PATCH v1 3/4] ARM: dts: rockchip: Add EMAC Rockchip for RK3066 SoCs
- [PATCH v1 2/4] dt-bindings: Document Marsboard RK3066 in Rockchip platforms dt-bindings
- [PATCH v1 1/4] ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066
- [PATCH] ARM: dts: Add SPI DMA into rk3288.dtsi
- [PATCH v3 4/6] ARM: rockchip: add suspend and resume for RK3288
- [PATCH] ARM: dts: Add SPI DMA into rk3288.dtsi
- [PATCH v7 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v13 1/5] thermal: rockchip: add driver for thermal
- [PATCH v13 1/5] thermal: rockchip: add driver for thermal
- [PATCH v13 4/5] ARM: dts: add main Thermal info to rk3288
- [PATCH v7 3/3] ARM: dts: add rk3288 power-domain node
- [PATCH v7 2/3] dt-bindings: add document of Rockchip power domain
- [PATCH v7 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v7 0/3] ARM: rk3288 : Add PM Domain support
- [PATCH v4 4/6] ARM: rockchip: add suspend and resume for RK3288
- [PATCH v13 4/5] ARM: dts: add main Thermal info to rk3288
- [PATCH v13 4/5] ARM: dts: add main Thermal info to rk3288
- [PATCH v13 1/5] thermal: rockchip: add driver for thermal
- [PATCH v13 3/5] ARM: dts: add RK3288 Thermal data
- [PATCH v13 4/5] ARM: dts: add main Thermal info to rk3288
- [PATCH v2 1/4] pinctrl: rockchip: Set wake_enabled
- [PATCH v2 1/4] pinctrl: rockchip: Set wake_enabled
- [PATCH v2 1/4] pinctrl: rockchip: Set wake_enabled
- [PATCH v2 2/4] pinctrl: rockchip: Don't call pinctrl_gpio_direction_output() in pin_config_set()
- [PATCH v2 4/4] pinctrl: rockchip: Protect read-modify-write with the spinlock
- [PATCH v2 3/4] pinctrl: rockchip: Parse pin groups before calling pinctrl_register()
- [PATCH 0/3] Rockchip IOMMU driver and devicetree bindings
- [PATCH 0/3] Rockchip IOMMU driver and devicetree bindings
- [PATCH v5 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v13 5/5] ARM: dts: enable Thermal on rk3288-evb board
- [PATCH v13 4/5] ARM: dts: add main Thermal info to rk3288
- [PATCH v13 3/5] ARM: dts: add RK3288 Thermal data
- [PATCH v13 2/5] dt-bindings: document Rockchip thermal
- [PATCH v13 1/5] thermal: rockchip: add driver for thermal
- [PATCH v13 0/5] Rockchip soc thermal driver
- [PATCH v4 5/6] ARM: rockchip: Add pmu-sram binding
- [PATCH v4 6/6] ARM: dts: add RK3288 suspend support
- [PATCH v5 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v6 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH 0/3] Rockchip IOMMU driver and devicetree bindings
- [PATCH v5 1/3] iommu/rockchip: rk3288 iommu driver
- [PATCH v5 2/6] ARM: rockchip: add option to access the pmu via a phandle in smp_operations
- [PATCH v3] ASoC: rockchip-i2s: add MAX98090 support to Kconfig
- [PATCH v5 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v5 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v5 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v6 3/3] ARM: dts: add rk3288 power-domain node
- [PATCH v6 2/3] dt-bindings: add document of Rockchip power domain
- [PATCH v6 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v6 0/3] ARM: rk3288 : Add PM Domain support
- [PATCH v4 4/6] ARM: rockchip: add suspend and resume for RK3288
- [PATCH v4 3/6] clk: rockchip: RK3288: add suspend and resume
- [PATCH v4 2/6] pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume
- [PATCH v4 1/6] pinctrl: rockchip: add suspend/resume functions
- [PATCH v4 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v5 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v3] ASoC: rockchip-i2s: add MAX98090 support to Kconfig
- [PATCH] ASoC: rockchip-i2s: add rockchip-max98090 driver support
- [PATCH v4 6/6] ARM: dts: add RK3288 suspend support
- [PATCH v4 5/6] ARM: rockchip: Add pmu-sram binding
- [PATCH v4 4/6] ARM: rockchip: add suspend and resume for RK3288
- [PATCH v4 3/6] clk: rockchip: RK3288: add suspend and resume
- [PATCH v4 2/6] pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume
- [PATCH v4 1/6] pinctrl: rockchip: add suspend/resume functions
- [PATCH v4 0/6] this is the 1st version of suspend. RK3288 can shut down the cpu, gpu and
- [PATCH v3 1/6] pinctrl: rockchip: add suspend/resume functions
- [PATCH v5 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v2 4/4] pinctrl: rockchip: Protect read-modify-write with the spinlock
- [PATCH v2 3/4] pinctrl: rockchip: Parse pin groups before calling pinctrl_register()
- [PATCH v2 2/4] pinctrl: rockchip: Don't call pinctrl_gpio_direction_output() in pin_config_set()
- [PATCH v2 1/4] pinctrl: rockchip: Set wake_enabled
- [PATCH v3 1/6] pinctrl: rockchip: add suspend/resume functions
- [PATCH 2/4] pinctrl: rockchip: Don't call pinctrl_gpio_direction_output() in pin_config_set()
- [alsa-devel] [PATCH] ASoC: rockchip-i2s: add rockchip-max98090 driver support
- [PATCH] ASoC: rockchip-i2s: add rockchip-max98090 driver support
- [PATCH v5 3/3] ARM: dts: add rk3288 power-domain node
- [PATCH v5 2/3] dt-bindings: add document of Rockchip power domain
- [PATCH v5 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v5 0/3] ARM: rk3288 : Add PM Domain support
- [PATCH v3 6/6] ARM: dts: add RK3288 suspend support
- From: zyw at rock-chips.com
- [PATCH v3 5/6] ARM: rockchip: Add pmu-sram binding
- From: zyw at rock-chips.com
- [PATCH v3 4/6] ARM: rockchip: add suspend and resume for RK3288
- From: zyw at rock-chips.com
- [PATCH v3 3/6] clk: rockchip: RK3288: add suspend and resume
- From: zyw at rock-chips.com
- [PATCH v3 2/6] pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume
- From: zyw at rock-chips.com
- [PATCH v3 1/6] pinctrl: rockchip: add suspend/resume functions
- From: zyw at rock-chips.com
- [PATCH v3 0/6] add suspend support for RK3288
- From: zyw at rock-chips.com
- [GIT PULL] core drm support for Rockchip SoCs
- [PATCH 3/4] pinctrl: rockchip: Parse pin groups before calling pinctrl_register()
- [PATCH 2/4] pinctrl: rockchip: Don't call pinctrl_gpio_direction_output() in pin_config_set()
- [PATCH 1/4] pinctrl: rockchip: Set wake_enabled
- [PATCH 4/4] pinctrl: rockchip: Protect read-modify-write with the spinlock
- [PATCH 4/4] pinctrl: rockchip: Protect read-modify-write with the spinlock
- [PATCH 3/4] pinctrl: rockchip: Parse pin groups before calling pinctrl_register()
- [PATCH 2/4] pinctrl: rockchip: Don't call pinctrl_gpio_direction_output() in pin_config_set()
- [PATCH 1/4] pinctrl: rockchip: Set wake_enabled
- [PATCH v4 1/3] power-domain: add power domain drivers for Rockchip platform
- From: Russell King - ARM Linux
- [PATCH v5 0/6] add basic rk3288 smp support
- [PATCH v4 0/3] ARM: rk3288 : Add PM Domain support
- [PATCH v4 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH] ARM: dts: rockchip: use internal pull-up resistors on I2C busses
- From: NEO-Technologies / Julien CHAUVEAU
- [PATCH] clk: rockchip: add npll to source of sclk_gpu
- [PATCH v11 0/3] Add drm driver for Rockchip Socs
- [PATCH v12 5/5] ARM: dts: enable Thermal on rk3288-evb board
- [PATCH v12 4/5] ARM: dts: add main Thermal info to rk3288
- [PATCH v12 3/5] ARM: dts: add RK3288 Thermal data
- [PATCH v12 2/5] dt-bindings: document Rockchip thermal
- [PATCH v12 1/5] thermal: rockchip: add driver for thermal
- [PATCH v12 0/5] Rockchip soc thermal driver
- [PATCH] ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP
- [PATCH v4 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v4 3/3] ARM: dts: add rk3288 power-domain node
- [PATCH v4 2/3] dt-bindings: add document of Rockchip power domain
- [PATCH v4 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v4 0/3] ARM: rk3288 : Add PM Domain support
- [PATCH] ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP
- [PATCH] ARM: dts: rockchip: use internal pull-up resistors on I2C busses
- [PATCH v5 1/6] ARM: rockchip: convert to regmap and use pmu syscon if available
- [PATCH v5 1/6] ARM: rockchip: convert to regmap and use pmu syscon if available
- [PATCH v2 2/4] ARM: rockchip: add suspend and resume for RK3288
- [PATCH v2 4/4] ARM: dts: add RK3288 suspend support
- From: zyw at rock-chips.com
- [PATCH v2 3/4] ARM: rockchip: Add pmu-sram binding
- From: zyw at rock-chips.com
- [PATCH v2 2/4] ARM: rockchip: add suspend and resume for RK3288
- From: zyw at rock-chips.com
- [PATCH v2 1/4] clk: rockchip: RK3288: add suspend and resume
- From: zyw at rock-chips.com
- [PATCH v2 0/4] add suspend support for RK3288
- From: zyw at rock-chips.com
- [PATCH] ARM: dts: rockchip: use internal pull-up resistors on I2C busses
- [PATCH v3 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH] spi/rockchip: spi controller must be disabled in tx callback too
- [PATCH v11 0/3] Add drm driver for Rockchip Socs
- [PATCH v5 1/3] iommu/rockchip: rk3288 iommu driver
- [PATCH v11 0/3] Add drm driver for Rockchip Socs
- [PATCH v11 0/3] Add drm driver for Rockchip Socs
- [PATCH v11 0/3] Add drm driver for Rockchip Socs
- [PATCH v11 0/3] Add drm driver for Rockchip Socs
- [PATCH v5 1/3] iommu/rockchip: rk3288 iommu driver
- [PATCH] spi/rockchip: spi controller must be disabled in tx callback too
- [PATCH v11 0/3] Add drm driver for Rockchip Socs
- [PATCH v11 0/3] Add drm driver for Rockchip Socs
- [PATCH v11 1/5] thermal: rockchip: add driver for thermal
- [PATCH v11 1/5] thermal: rockchip: add driver for thermal
- [PATCH] clk: rockchip: add npll to source of sclk_gpu
- [PATCH v11 1/5] thermal: rockchip: add driver for thermal
- [PATCH v11 4/5] ARM: dts: add main Thermal info to rk3288
- [PATCH v2 0/2] init some clock rate from dts for rk3288
- [PATCH v11 5/5] ARM: dts: enable Thermal on rk3288-evb board
- [PATCH v11 4/5] ARM: dts: add main Thermal info to rk3288
- [PATCH v11 3/5] ARM: dts: add RK3288 Thermal data
- [PATCH v11 2/5] dt-bindings: document Rockchip thermal
- [PATCH v11 1/5] thermal: rockchip: add driver for thermal
- [PATCH v11 0/5] Rockchip soc thermal driver
- [PATCH v3 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v10 1/5] thermal: rockchip: add driver for thermal
- [PATCH v3 3/3] ARM: dts: add rk3288 power-domain node
- [PATCH v3 2/3] dt-bindings: add document of Rockchip power domain
- [PATCH v3 1/3] power-domain: add power domain drivers for Rockchip platform
- [PATCH v3 0/3] ARM: rk3288 : Add PM Domain support
- [PATCH 1/2] spi/rockchip: fix bug that case spi can't go as fast as slave request
- [PATCH 3/4] ARM: dts: add RK3288 suspend support
- [PATCH 1/2] spi/rockchip: fix bug that case spi can't go as fast as slave request
- [PATCH 2/2] spi/rockchip: fix bug that cause spi transfer timed out in DMA duplex mode
- [PATCH 1/2] spi/rockchip: fix bug that case spi can't go as fast as slave request
- [PATCH 2/2] spi/rockchip: fix bug that cause spi transfer timed out in DMA duplex mode
- [PATCH 1/2] spi/rockchip: fix bug that case spi can't go as fast as slave request
- [PATCH 1/4] ARM: rockchip: add suspend and resume for RK3288
- [PATCH 3/4] ARM: dts: add RK3288 suspend support
- [PATCH 4/4] ARM: rockchip: add pmu-sram sub
- [PATCH 2/4] clk: rockchip: RK3288: add suspend and resume
- [PATCH] mmc: dw_mmc: rockchip: Don't recalc the clock when it goes off
- [PATCH 4/4] ARM: rockchip: add pmu-sram sub
- From: zyw at rock-chips.com
- [PATCH 3/4] ARM: dts: add RK3288 suspend support
- From: zyw at rock-chips.com
- [PATCH 2/4] clk: rockchip: RK3288: add suspend and resume
- From: zyw at rock-chips.com
- [PATCH 1/4] ARM: rockchip: add suspend and resume for RK3288
- From: zyw at rock-chips.com
- [PATCH 0/4] add suspend support for RK3288
- From: zyw at rock-chips.com
- [PATCH v5 6/6] ARM: dts: rockchip: add reset for CPU nodes
- [PATCH v5 5/6] ARM: dts: rockchip: add intmem node for rk3288 smp support
- [PATCH v5 4/6] ARM: rockchip: add basic smp support for rk3288
- [PATCH v5 3/6] ARM: dts: rockchip: add pmu references to cpus nodes
- [PATCH v5 2/6] ARM: rockchip: add option to access the pmu via a phandle in smp_operations
- [PATCH v5 1/6] ARM: rockchip: convert to regmap and use pmu syscon if available
- [PATCH v5 0/6] add basic rk3288 smp support
- [PATCH v2] ARM: dts: rockchip: add I2S controllers for rk3066 and rk3188
- [PATCH 2/2] spi/rockchip: fix bug that cause spi transfer timed out in DMA duplex mode
- [PATCH 1/2] spi/rockchip: fix bug that case spi can't go as fast as slave request
- [PATCH 2/2] spi/rockchip: fix bug that cause spi transfer timed out in DMA duplex mode
- [PATCH 1/2] spi/rockchip: fix bug that case spi can't go as fast as slave request
- [PATCH 0/2] spi: fix two bugs
- [PATCH v4 4/6] ARM: rockchip: add basic smp support for rk3288
- [PATCH v4 4/6] ARM: rockchip: add basic smp support for rk3288
- From: Russell King - ARM Linux
- [PATCH v4 4/6] ARM: rockchip: add basic smp support for rk3288
- From: Russell King - ARM Linux
- [PATCH v6] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- [PATCH v4 4/6] ARM: rockchip: add basic smp support for rk3288
- [PATCH v4 4/6] ARM: rockchip: add basic smp support for rk3288
- [PATCH v4 4/6] ARM: rockchip: add basic smp support for rk3288
- [PATCH v10 1/5] thermal: rockchip: add driver for thermal
- [PATCH v10 5/5] ARM: dts: enable Thermal on rk3288-evb board
- [PATCH v10 4/5] ARM: dts: add main Thermal info to rk3288
- [PATCH v10 3/5] ARM: dts: add RK3288 Thermal data
- [PATCH v10 2/5] dt-bindings: document Rockchip thermal
- [PATCH v10 1/5] thermal: rockchip: add driver for thermal
- [PATCH v10 0/5] Rockchip soc thermal driver
- [PATCH] mmc: dw_mmc: rockchip: Don't recalc the clock when it goes off
- [PATCH v9 1/5] thermal: rockchip: add driver for thermal
- [PATCH v2] ARM: dts: rockchip: add I2S controllers for rk3066 and rk3188
- [PATCH v5 3/3] ARM: dts: rk3288: add VOP iommu nodes
- [PATCH v5 1/3] iommu/rockchip: rk3288 iommu driver
- [PATCH v4 3/3] ARM: dts: rk3288: add VOP iommu nodes
- [PATCH v4 1/3] iommu/rockchip: rk3288 iommu driver
- [PATCH v3 3/3] ARM: dts: rk3288: add VOP iommu nodes
- [PATCH v6] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- [PATCH] ARM: dts: rockchip: add I2S controllers for rk3066 and rk3188
- [PATCH v3 3/3] ARM: dts: rk3288: add VOP iommu nodes
- [PATCH v4 6/6] ARM: dts: rockchip: add reset for CPU nodes
- [PATCH v4 5/6] ARM: dts: rockchip: add intmem node for rk3288 smp support
- [PATCH v4 4/6] ARM: rockchip: add basic smp support for rk3288
- [PATCH v4 3/6] ARM: dts: rockchip: add pmu references to cpus nodes
- [PATCH v4 2/6] ARM: rockchip: add option to access the pmu via a phandle in smp_operations
- [PATCH v4 1/6] ARM: rockchip: convert to regmap and use pmu syscon if available
- [PATCH v4 0/6] add basic rk3288 smp support
- [PATCH v9 1/5] thermal: rockchip: add driver for thermal
- [PATCH] ARM: dts: rockchip: add I2S controllers for rk3066 and rk3188
- [PATCH v5] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- [PATCH v5] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- [PATCH v4] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- [PATCH v5 RFC] i2c: rk3x: handle dynamic clock rate changes correctly
- [PATCH v4] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- [PATCH] clk: rockchip: Add CLK_SET_RATE_PARENT to aclk_cpu_pre
- [PATCH] clk: rockchip: fix parent for spdif_8ch_frac on rk3288
- [PATCH] ARM: dts: rockchip: enable DMA on SPI for rk3066 and rk3188
- [PATCH 1/2] ARM: rockchip: fix up rk3288 smp cpu hotplug
- [PATCH v3 0/6] add basic rk3288 smp support
- [PATCH v3 6/6] ARM: dts: rockchip: add intmem node for rk3288 smp support
- [PATCH v3 5/6] ARM: rockchip: add basic smp support for rk3288
- [PATCH v3 4/6] ARM: dts: rockchip: add pmu references to cpus nodes
- [PATCH v3 3/6] ARM: rockchip: add option to access the pmu via a phandle in smp_operations
- [PATCH v3 2/6] ARM: dts: rockchip: use the same pmu node name as before
- [PATCH v3 1/6] ARM: rockchip: convert to regmap and use pmu syscon if available
- [PATCH v4] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- [PATCH v9 5/5] ARM: dts: enable Thermal on rk3288-evb board
- [PATCH v9 4/5] ARM: dts: add main Thermal info to rk3288
- [PATCH v9 3/5] ARM: dts: add RK3288 Thermal data
- [PATCH v9 2/5] dt-bindings: document Rockchip thermal
- [PATCH v9 1/5] thermal: rockchip: add driver for thermal
- [PATCH v9 0/5] Rockchip soc thermal driver
- [PATCH v8 1/5] thermal: rockchip: add driver for thermal
- [PATCH v8 1/5] thermal: rockchip: add driver for thermal
- [PATCH 2/2] ARM: dts: rockchip: add reset for CPU nodes
- [PATCH 1/2] ARM: rockchip: fix up rk3288 smp cpu hotplug
- [PATCH 0/2] Fix up rk3288 smp cpu hotplug
- [PATCH v3 6/6] ARM: dts: rockchip: add intmem node for rk3288 smp support
- [PATCH v3 5/6] ARM: rockchip: add basic smp support for rk3288
- [PATCH v3 4/6] ARM: dts: rockchip: add pmu references to cpus nodes
- [PATCH v3 3/6] ARM: rockchip: add option to access the pmu via a phandle in smp_operations
- [PATCH v3 2/6] ARM: dts: rockchip: use the same pmu node name as before
- [PATCH v3 1/6] ARM: rockchip: convert to regmap and use pmu syscon if available
- [PATCH v3 0/6] add basic rk3288 smp support
- [PATCH] clk: rockchip: change PLL setting for better clock jitter
- [PATCH v3 3/3] ARM: dts: rk3288: add VOP iommu nodes
- [PATCH v3 1/3] iommu/rockchip: rk3288 iommu driver
- [PATCH v8 1/5] thermal: rockchip: add driver for thermal
- [PATCH v2 1/2] clk: rockchip: add 400MHz and 500MHz for rk3288 clock rate
- [PATCH v8 5/5] ARM: dts: enable Thermal on rk3288-evb board
- [PATCH v8 4/5] ARM: dts: add main Thermal info to rk3288
- [PATCH v8 3/5] ARM: dts: add RK3288 Thermal data
- [PATCH v8 2/5] dt-bindings: document Rockchip thermal
- [PATCH v8 1/5] thermal: rockchip: add driver for thermal
- [PATCH v8 0/5] Rockchip soc thermal driver
- [PATCH] ARM: dts: rockchip: enable DMA on SPI for rk3066 and rk3188
- [PATCH] clk: rockchip: change PLL setting for better clock jitter
- [PATCH v2 2/2] ARM: dts: enable init rate for clock
- [PATCH v2 1/2] clk: rockchip: add 400MHz and 500MHz for rk3288 clock rate
- [PATCH v2 0/2] init some clock rate from dts for rk3288
- [PATCH v4] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- [PATCH] regulator: rk808: Add support setting suspend voltage
- [PATCH] regulator: rk808: Add support setting suspend voltage
- [PATCH] regulator: rk808: Add support setting suspend voltage
- [PATCH v9 1/3] drm: rockchip: Add basic drm driver
- [PATCH] regulator: rk808: Add support setting suspend voltage
- [PATCH] ASoC: rockchip-i2s: fix infinite loop in rockchip_snd_txctrl
- [PATCH v11 3/3] dt-bindings: video: Add documentation for rockchip vop
- [PATCH v11 2/3] dt-bindings: video: Add for rockchip display subsytem
- [PATCH v11 1/3] drm: rockchip: Add basic drm driver
- [PATCH v11 0/3] Add drm driver for Rockchip Socs
- [PATCH v10 1/3] drm: rockchip: Add basic drm driver
- [PATCH] clk: rockchip: fix parent for spdif_8ch_frac on rk3288
- [PATCH] regulator: rk808: Add support setting suspend voltage
- From: Javier Martinez Canillas
- [PATCH] ASoC: rockchip-i2s: fix infinite loop in rockchip_snd_txctrl
- [PATCH v7 1/5] thermal: rockchip: add driver for thermal
- [PATCH v3] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- [PATCH v10 3/3] dt-bindings: video: Add documentation for rockchip vop
- [PATCH v10 2/3] dt-bindings: video: Add for rockchip display subsytem
- [PATCH v10 1/3] drm: rockchip: Add basic drm driver
- [PATCH v10 0/3] Add drm driver for Rockchip Socs
- [PATCH v3] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- [PATCH v2 3/3] ARM: dts: rk3288: add VOP iommu nodes
- [PATCH v2 1/3] iommu/rockchip: rk3288 iommu driver
- [PATCH v7 1/5] thermal: rockchip: add driver for thermal
- [PATCH v9 1/3] drm: rockchip: Add basic drm driver
- [PATCH 2/2] ARM: dts: enable init rate for clock
- [PATCH] regulator: rk808: Fix min_uV for DCDC1 & DCDC2
- [PATCH 2/2] ARM: dts: enable init rate for clock
- [PATCH 2/2] ARM: dts: enable init rate for clock
- [PATCH 2/2] ARM: dts: enable init rate for clock
- [PATCH] regulator: rk808: Add support setting suspend voltage
- [PATCH] regulator: rk808: Add support setting suspend voltage
- [PATCH 0/2] init some clock rate from dts for rk3288
- [PATCH 1/3] iommu/rockchip: rk3288 iommu driver
- [PATCH 2/2] ARM: dts: enable init rate for clock
- [PATCH 1/2] clk: rockchip: add 400MHz and 500MHz for rk3288 clock rate
- rk2918 support
- From: steve at snewbury.org.uk
- rk2918 support
- rk2918 support
- rk2918 support
- [PATCH 2/2] ARM: dts: enable init rate for clock
- [PATCH 1/2] clk: rockchip: add 400MHz and 500MHz for rk3288 clock rate
- [PATCH 0/2] init some clock rate from dts for rk3288
- [PATCH] regulator: rk808: Add support setting suspend voltage
- rk2918 support
- [PATCH v9 1/3] drm: rockchip: Add basic drm driver
- [PATCH] regulator: rk808: Fix min_uV for DCDC1 & DCDC2
- [PATCH] regulator: rk808: Fix min_uV for DCDC1 & DCDC2
- [PATCH] clk: rockchip: Add CLK_SET_RATE_PARENT to aclk_cpu_pre
- rk2918 support
- rk2918 support
- rk2918 support
- rk2918 support
- From: steve at snewbury.org.uk
- rk2918 support
- rk2918 support
- rk2918 support
[Index of Archives]
[LM Sensors]
[Linux Sound]
[ALSA Users]
[ALSA Devel]
[Linux Audio Users]
[Linux Media]
[Kernel]
[Gimp]
[Yosemite News]
[Linux Media]