On Tue, Oct 14, 2014 at 6:33 AM, Heiko St?bner <heiko at sntech.de> wrote:
> Hi Daniel,
>
> Am Samstag, 11. Oktober 2014, 02:30:48 schrieb Daniel Kurtz:
>> Add device nodes for the VOP iommus.
>> Device nodes for other iommus will be added in later patches.
>>
>> The iommu nodes use the #iommu-cells property as described in:
>> Documentation/devicetree/bindings/iommu/iommu.txt
>>
>> Signed-off-by: Daniel Kurtz <djkurtz at chromium.org>
>> Signed-off-by: Simon Xue <xxm at rock-chips.com>
>> ---
>> arch/arm/boot/dts/rk3288.dtsi | 18 ++++++++++++++++++
>> 1 file changed, 18 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
>> index 5950b0a..cbc92fa 100644
>> --- a/arch/arm/boot/dts/rk3288.dtsi
>> +++ b/arch/arm/boot/dts/rk3288.dtsi
>> @@ -271,6 +271,24 @@
>> status = "disabled";
>> };
>>
>> + vopb_mmu: iommu at 0xff930300 {
>
> please use the address without the 0x here ... iommu at ff930300
I've been doing it wrong for a while and no one else noticed :-). Thanks!
I will resend.
> Thanks
> Heiko
>
>> + compatible = "rockchip,iommu";
>> + reg = <0xff930300 0x100>;
>> + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "vopb_mmu";
>> + #iommu-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> + vopl_mmu: iommu at 0xff940300 {
>> + compatible = "rockchip,iommu";
>> + reg = <0xff940300 0x100>;
>> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "vopl_mmu";
>> + #iommu-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> gic: interrupt-controller at ffc01000 {
>> compatible = "arm,gic-400";
>> interrupt-controller;
>
