Hi Zubair:
thanks very much for your comments.
On 2014?11?10? 18:51, Zubair Lutfullah Kakakhel wrote:
> Hi Andy,
>
> A few comments inline.
>
> On 08/11/14 05:28, Andy Yan wrote:
>> imx6 and rockchip rk3288 and JZ4780 (Ingenic Xburst/MIPS)
>> use the interface compatible Designware HDMI IP, but they
>> also have some lightly difference, such as phy pll configuration,
>> register width, 4K support, clk useage, and the crtc mux configuration
>> is also platform specific.
>>
>> To reuse the imx hdmi driver, split the platform specific code out
>> to dw_hdmi-imx.c.
>>
>> Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
>> ---
>> drivers/staging/imx-drm/Makefile | 2 +-
>> drivers/staging/imx-drm/dw_hdmi-imx.c | 214 ++++++++++++++++++++++++++++
>> drivers/staging/imx-drm/imx-hdmi.c | 257 ++++++++--------------------------
>> drivers/staging/imx-drm/imx-hdmi.h | 43 ++++++
>> 4 files changed, 320 insertions(+), 196 deletions(-)
>> create mode 100644 drivers/staging/imx-drm/dw_hdmi-imx.c
>>
>> diff --git a/drivers/staging/imx-drm/Makefile b/drivers/staging/imx-drm/Makefile
>> index 582c438..809027d 100644
>> --- a/drivers/staging/imx-drm/Makefile
>> +++ b/drivers/staging/imx-drm/Makefile
>> @@ -9,4 +9,4 @@ obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o
>>
>> imx-ipuv3-crtc-objs := ipuv3-crtc.o ipuv3-plane.o
>> obj-$(CONFIG_DRM_IMX_IPUV3) += imx-ipuv3-crtc.o
>> -obj-$(CONFIG_DRM_IMX_HDMI) += imx-hdmi.o
>> +obj-$(CONFIG_DRM_IMX_HDMI) += imx-hdmi.o dw_hdmi-imx.o
>> diff --git a/drivers/staging/imx-drm/dw_hdmi-imx.c b/drivers/staging/imx-drm/dw_hdmi-imx.c
>> new file mode 100644
>> index 0000000..5422679
>> --- /dev/null
>> +++ b/drivers/staging/imx-drm/dw_hdmi-imx.c
>> @@ -0,0 +1,214 @@
>> +/*
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
> Please add the old freescale copyrights and a comment on how this file is derived from.
ok, I will add it in V7
> And a note on platform specific file for imx hdmi using dwc hdmi drm bridge.
sorry, I am not clear which specific file you means. Would you
please tell
me more about the note?
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
>> +#include <video/imx-ipu-v3.h>
>> +#include <linux/regmap.h>
>> +#include <linux/clk.h>
>> +
>> +#include "imx-drm.h"
>> +#include "imx-hdmi.h"
>> +
>> +struct imx_hdmi_priv {
>> + struct device *dev;
>> + struct clk *isfr_clk;
>> + struct clk *iahb_clk;
>> + struct regmap *regmap;
>> +};
>> +
>> +static const struct mpll_config imx_mpll_cfg[] = {
>> + {
>> + 45250000, {
>> + { 0x01e0, 0x0000 },
>> + { 0x21e1, 0x0000 },
>> + { 0x41e2, 0x0000 }
>> + },
>> + }, {
>> + 92500000, {
>> + { 0x0140, 0x0005 },
>> + { 0x2141, 0x0005 },
>> + { 0x4142, 0x0005 },
>> + },
>> + }, {
>> + 148500000, {
>> + { 0x00a0, 0x000a },
>> + { 0x20a1, 0x000a },
>> + { 0x40a2, 0x000a },
>> + },
>> + }, {
>> + ~0UL, {
>> + { 0x00a0, 0x000a },
>> + { 0x2001, 0x000f },
>> + { 0x4002, 0x000f },
>> + },
>> + }
>> +};
>> +
>> +static const struct curr_ctrl imx_cur_ctr[] = {
>> + /* pixelclk bpp8 bpp10 bpp12 */
>> + {
>> + 54000000, { 0x091c, 0x091c, 0x06dc },
>> + }, {
>> + 58400000, { 0x091c, 0x06dc, 0x06dc },
>> + }, {
>> + 72000000, { 0x06dc, 0x06dc, 0x091c },
>> + }, {
>> + 74250000, { 0x06dc, 0x0b5c, 0x091c },
>> + }, {
>> + 118800000, { 0x091c, 0x091c, 0x06dc },
>> + }, {
>> + 216000000, { 0x06dc, 0x0b5c, 0x091c },
>> + }
>> +};
> These pll clocks. Are they completely different?
>
> I assume they are dependent on display resolutions. The old
> ones should remain the same. With new additions for 4K clock
> rates e.g.
>
even the 1080P on rockchip platform, we need a different
configuration, otherwise we can't get the best SI.
>> +
>> +static int imx_hdmi_parse_dt(struct imx_hdmi_priv *hdmi)
>> +{
>> + struct device_node *np = hdmi->dev->of_node;
>> +
>> + hdmi->regmap = syscon_regmap_lookup_by_phandle(np, "gpr");
>> + if (IS_ERR(hdmi->regmap)) {
>> + dev_err(hdmi->dev, "Unable to get gpr\n");
>> + return PTR_ERR(hdmi->regmap);
>> + }
>> +
>> + hdmi->isfr_clk = devm_clk_get(hdmi->dev, "isfr");
>> + if (IS_ERR(hdmi->isfr_clk)) {
>> + dev_err(hdmi->dev, "Unable to get HDMI isfr clk\n");
>> + return PTR_ERR(hdmi->isfr_clk);
>> + }
>> +
>> + hdmi->iahb_clk = devm_clk_get(hdmi->dev, "iahb");
>> + if (IS_ERR(hdmi->iahb_clk)) {
>> + dev_err(hdmi->dev, "Unable to get HDMI iahb clk\n");
>> + return PTR_ERR(hdmi->iahb_clk);
>> + }
>> +
> These two clocks. This is how they are structured on the jz4780 as well.
>
> >From an earlier patch series
>
> "yes, this IP core need to be clocked. But different Soc has different
> usage of the clk, on freescale imx platform one clk is used for isfr, one is used for iahb,
> but on rockchip rk3288, one clk is used for control logic , the another is used for hdcp.
> I am not sure how are the clocks on jz4780"
>
> They might be labelled as such in the rk3288 document.
> But what are they used for and how are they different?
>
> The clocks are simply enabled in dwc-hdmi as these are the ones that clock the DWC IP core.
>
> I doubt the core is always clocked in the rk3288.
>
> I think this belongs in the dwc_hdmi driver backend.
on rk3288, on clk called pclk is used for control logic, the other
clk called hdcp_clk
is used for hdcp application, thise clk can disabled when hdcp is
not used.
>
>> + return 0;
>> +}
>> +
>> +static void *imx_hdmi_imx_setup(struct platform_device *pdev)
>> +{
>> + struct imx_hdmi_priv *hdmi;
>> + int ret;
>> +
>> + hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
>> + if (!hdmi)
>> + return ERR_PTR(-ENOMEM);
>> + hdmi->dev = &pdev->dev;
>> +
>> + ret = imx_hdmi_parse_dt(hdmi);
>> + if (ret < 0)
>> + return ERR_PTR(ret);
>> + ret = clk_prepare_enable(hdmi->isfr_clk);
>> + if (ret) {
>> + dev_err(hdmi->dev,
>> + "Cannot enable HDMI isfr clock: %d\n", ret);
>> + return ERR_PTR(ret);
>> + }
>> +
>> + ret = clk_prepare_enable(hdmi->iahb_clk);
>> + if (ret) {
>> + dev_err(hdmi->dev,
>> + "Cannot enable HDMI iahb clock: %d\n", ret);
>> + return ERR_PTR(ret);
>> + }
>> +
>> + return hdmi;
>> +}
>> +
>> +static void imx_hdmi_imx_exit(void *priv)
>> +{
>> + struct imx_hdmi_priv *hdmi = (struct imx_hdmi_priv *)priv;
>> +
>> + clk_disable_unprepare(hdmi->isfr_clk);
>> +
>> + clk_disable_unprepare(hdmi->iahb_clk);
>> +}
>> +
>> +static void imx_hdmi_imx_encoder_commit(void *priv, struct drm_encoder *encoder)
>> +{
>> + struct imx_hdmi_priv *hdmi = (struct imx_hdmi_priv *)priv;
>> + int mux = imx_drm_encoder_get_mux_id(hdmi->dev->of_node, encoder);
>> +
>> + regmap_update_bits(hdmi->regmap, IOMUXC_GPR3,
>> + IMX6Q_GPR3_HDMI_MUX_CTL_MASK,
>> + mux << IMX6Q_GPR3_HDMI_MUX_CTL_SHIFT);
>> +}
>> +
>> +static void imx_hdmi_imx_encoder_prepare(struct drm_connector *connector,
>> + struct drm_encoder *encoder)
>> +{
>> + imx_drm_panel_format(encoder, V4L2_PIX_FMT_RGB24);
>> +}
>> +
>> +static struct imx_hdmi_plat_data imx6q_hdmi_drv_data = {
>> + .setup = imx_hdmi_imx_setup,
>> + .exit = imx_hdmi_imx_exit,
>> + .encoder_commit = imx_hdmi_imx_encoder_commit,
>> + .encoder_prepare = imx_hdmi_imx_encoder_prepare,
>> + .mpll_cfg = imx_mpll_cfg,
>> + .cur_ctr = imx_cur_ctr,
>> + .dev_type = IMX6Q_HDMI,
>> +};
>> +
>> +static struct imx_hdmi_plat_data imx6dl_hdmi_drv_data = {
>> + .setup = imx_hdmi_imx_setup,
>> + .exit = imx_hdmi_imx_exit,
>> + .encoder_commit = imx_hdmi_imx_encoder_commit,
>> + .encoder_prepare = imx_hdmi_imx_encoder_prepare,
>> + .mpll_cfg = imx_mpll_cfg,
>> + .cur_ctr = imx_cur_ctr,
>> + .dev_type = IMX6DL_HDMI,
>> +};
>> +
>> +static const struct of_device_id imx_hdmi_imx_ids[] = {
>> + { .compatible = "fsl,imx6q-hdmi",
>> + .data = &imx6q_hdmi_drv_data
>> + }, {
>> + .compatible = "fsl,imx6dl-hdmi",
>> + .data = &imx6dl_hdmi_drv_data
>> + },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, imx_hdmi_imx_dt_ids);
>> +
>> +static int imx_hdmi_imx_probe(struct platform_device *pdev)
>> +{
>> + const struct imx_hdmi_plat_data *plat_data;
>> + const struct of_device_id *match;
>> +
>> + if (!pdev->dev.of_node)
>> + return -ENODEV;
>> +
>> + match = of_match_node(imx_hdmi_imx_ids, pdev->dev.of_node);
>> + plat_data = match->data;
>> +
>> + return imx_hdmi_platform_register(pdev, plat_data);
>> +}
>> +
>> +static int imx_hdmi_imx_remove(struct platform_device *pdev)
>> +{
>> + return imx_hdmi_platform_unregister(pdev);
>> +}
>> +
>> +static struct platform_driver imx_hdmi_imx_platform_driver = {
>> + .probe = imx_hdmi_imx_probe,
>> + .remove = imx_hdmi_imx_remove,
>> + .driver = {
>> + .name = "dwhdmi-imx",
>> + .owner = THIS_MODULE,
>> + .of_match_table = imx_hdmi_imx_ids,
>> + },
>> +};
>> +
>> +module_platform_driver(imx_hdmi_imx_platform_driver);
>> +
>> +MODULE_AUTHOR("Andy Yan <andy.yan at rock-chips.com>");
>> +MODULE_DESCRIPTION("IMX6 Specific DW-HDMI Driver Extension");
>> +MODULE_LICENSE("GPL");
>> +MODULE_ALIAS("platform:dwhdmi-imx");
>> diff --git a/drivers/staging/imx-drm/imx-hdmi.c b/drivers/staging/imx-drm/imx-hdmi.c
>> index aaec6b2..cd9cf86 100644
>> --- a/drivers/staging/imx-drm/imx-hdmi.c
>> +++ b/drivers/staging/imx-drm/imx-hdmi.c
>> @@ -16,23 +16,17 @@
>> #include <linux/irq.h>
>> #include <linux/delay.h>
>> #include <linux/err.h>
>> -#include <linux/clk.h>
>> #include <linux/hdmi.h>
>> -#include <linux/regmap.h>
>> -#include <linux/mfd/syscon.h>
>> -#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
>> #include <linux/of_device.h>
>> -
> Please leave this line. Keeps the drm headers separate
ok
>
>> +#include <drm/drm_of.h>
>> #include <drm/drmP.h>
>> #include <drm/drm_crtc_helper.h>
>> #include <drm/drm_edid.h>
>> #include <drm/drm_encoder_slave.h>
>> -#include <video/imx-ipu-v3.h>
>>
>> #include "imx-hdmi.h"
>> -#include "imx-drm.h"
>>
>> -#define HDMI_EDID_LEN 512
>> +#define HDMI_EDID_LEN 512
> Why is this change here? Is it adding spaces instead of tabs?
>
>>
>> #define RGB 0
>> #define YCBCR444 1
>> @@ -54,11 +48,6 @@ enum hdmi_datamap {
>> YCbCr422_12B = 0x12,
>> };
>>
>> -enum imx_hdmi_devtype {
>> - IMX6Q_HDMI,
>> - IMX6DL_HDMI,
>> -};
>> -
>> static const u16 csc_coeff_default[3][4] = {
>> { 0x2000, 0x0000, 0x0000, 0x0000 },
>> { 0x0000, 0x2000, 0x0000, 0x0000 },
>> @@ -121,6 +110,8 @@ struct imx_hdmi {
>> struct clk *iahb_clk;
> I disagree with moving clocks out of the dwc-hdmi driver.
> But If these clocks are moved out into SoC files, any reason these variables
> remain in the structure?
the pll config is platform specific as I explained before, so we need
move it into
soc files. These variable will be removed in next version.
>
>>
>> struct hdmi_data_info hdmi_data;
>> + const struct imx_hdmi_plat_data *plat_data;
>> + void *priv;
> Adding a platform specific structure to the generic driver feels strange.
>
> For this to work, each SoC will need to use the same structure.
>
> That indirectly means, there is still generic stuff that can be incorporated into the
> generic dwc-hdmi driver.
these structure is for some control functions(such as crtc mux, panel
format set, dispaly mode valid) ,and it will be removed when we convert
to drm_bridge driver in patch#6
>
>> int vic;
>>
>> u8 edid[HDMI_EDID_LEN];
>> @@ -137,13 +128,6 @@ struct imx_hdmi {
>> int ratio;
>> };
>>
>> -static void imx_hdmi_set_ipu_di_mux(struct imx_hdmi *hdmi, int ipu_di)
>> -{
>> - regmap_update_bits(hdmi->regmap, IOMUXC_GPR3,
>> - IMX6Q_GPR3_HDMI_MUX_CTL_MASK,
>> - ipu_di << IMX6Q_GPR3_HDMI_MUX_CTL_SHIFT);
>> -}
>> -
>> static inline void hdmi_writeb(struct imx_hdmi *hdmi, u8 val, int offset)
>> {
>> writeb(val, hdmi->regs + offset);
>> @@ -728,76 +712,13 @@ static void imx_hdmi_phy_sel_interface_control(struct imx_hdmi *hdmi, u8 enable)
>> HDMI_PHY_CONF0_SELDIPIF_MASK);
>> }
>>
>> -enum {
>> - RES_8,
>> - RES_10,
>> - RES_12,
>> - RES_MAX,
>> -};
>> -
>> -struct mpll_config {
>> - unsigned long mpixelclock;
>> - struct {
>> - u16 cpce;
>> - u16 gmp;
>> - } res[RES_MAX];
>> -};
>> -
>> -static const struct mpll_config mpll_config[] = {
>> - {
>> - 45250000, {
>> - { 0x01e0, 0x0000 },
>> - { 0x21e1, 0x0000 },
>> - { 0x41e2, 0x0000 }
>> - },
>> - }, {
>> - 92500000, {
>> - { 0x0140, 0x0005 },
>> - { 0x2141, 0x0005 },
>> - { 0x4142, 0x0005 },
>> - },
>> - }, {
>> - 148500000, {
>> - { 0x00a0, 0x000a },
>> - { 0x20a1, 0x000a },
>> - { 0x40a2, 0x000a },
>> - },
>> - }, {
>> - ~0UL, {
>> - { 0x00a0, 0x000a },
>> - { 0x2001, 0x000f },
>> - { 0x4002, 0x000f },
>> - },
>> - }
>> -};
>> -
>> -struct curr_ctrl {
>> - unsigned long mpixelclock;
>> - u16 curr[RES_MAX];
>> -};
>> -
>> -static const struct curr_ctrl curr_ctrl[] = {
>> - /* pixelclk bpp8 bpp10 bpp12 */
>> - {
>> - 54000000, { 0x091c, 0x091c, 0x06dc },
>> - }, {
>> - 58400000, { 0x091c, 0x06dc, 0x06dc },
>> - }, {
>> - 72000000, { 0x06dc, 0x06dc, 0x091c },
>> - }, {
>> - 74250000, { 0x06dc, 0x0b5c, 0x091c },
>> - }, {
>> - 118800000, { 0x091c, 0x091c, 0x06dc },
>> - }, {
>> - 216000000, { 0x06dc, 0x0b5c, 0x091c },
>> - }
>> -};
>> -
> As noted previously, current control is from the phy by DWC.
> Have they changed it so much that each SoC will need to define its own?
>
> I have used these for the jz4780. Although, I didn't have the full spec of
> the exact hdmi IP in the SoC to be able to check. But I doubt such values
> will change significantly in the IP core. Further currents,clock speeds
> might be added to support greater resolutions.
>
> But everything should be backward compatible (*in an ideal world..*)
>
> Perhaps it would help if you could share an RFC patch of what the platform
> file looks like for rk3288?
ok, i will add rk3288 platform code later
> How do you test all these patches? On an imx board? Or on an rk3288 board?
I test the patch on rk3288 board, i don't have an imx board.
>
>> static int hdmi_phy_configure(struct imx_hdmi *hdmi, unsigned char prep,
>> unsigned char res, int cscon)
>> {
>> unsigned res_idx, i;
>> u8 val, msec;
>> + const struct mpll_config *mpll_cfg = hdmi->plat_data->mpll_cfg;
>> + const struct curr_ctrl *curr_ctr = hdmi->plat_data->cur_ctr;
>>
>> if (prep)
>> return -EINVAL;
>> @@ -843,20 +764,19 @@ static int hdmi_phy_configure(struct imx_hdmi *hdmi, unsigned char prep,
>> hdmi_phy_test_clear(hdmi, 0);
>>
>> /* PLL/MPLL Cfg - always match on final entry */
>> - for (i = 0; i < ARRAY_SIZE(mpll_config) - 1; i++)
>> + for (i = 0; mpll_cfg[i].mpixelclock != (~0UL); i++)
>> if (hdmi->hdmi_data.video_mode.mpixelclock <=
>> - mpll_config[i].mpixelclock)
>> + mpll_cfg[i].mpixelclock)
>> break;
>> + hdmi_phy_i2c_write(hdmi, mpll_cfg[i].res[res_idx].cpce, 0x06);
>> + hdmi_phy_i2c_write(hdmi, mpll_cfg[i].res[res_idx].gmp, 0x15);
>>
>> - hdmi_phy_i2c_write(hdmi, mpll_config[i].res[res_idx].cpce, 0x06);
>> - hdmi_phy_i2c_write(hdmi, mpll_config[i].res[res_idx].gmp, 0x15);
>> -
>> - for (i = 0; i < ARRAY_SIZE(curr_ctrl); i++)
>> + for (i = 0; curr_ctr[i].mpixelclock != (~0UL); i++)
>> if (hdmi->hdmi_data.video_mode.mpixelclock <=
>> - curr_ctrl[i].mpixelclock)
>> + curr_ctr[i].mpixelclock)
>> break;
>>
>> - if (i >= ARRAY_SIZE(curr_ctrl)) {
>> + if (curr_ctr[i].mpixelclock == (~0UL)) {
>> dev_err(hdmi->dev,
>> "Pixel clock %d - unsupported by HDMI\n",
>> hdmi->hdmi_data.video_mode.mpixelclock);
>> @@ -864,7 +784,7 @@ static int hdmi_phy_configure(struct imx_hdmi *hdmi, unsigned char prep,
>> }
>>
>> /* CURRCTRL */
>> - hdmi_phy_i2c_write(hdmi, curr_ctrl[i].curr[res_idx], 0x10);
>> + hdmi_phy_i2c_write(hdmi, curr_ctr[i].curr[res_idx], 0x10);
>>
>> hdmi_phy_i2c_write(hdmi, 0x0000, 0x13); /* PLLPHBYCTRL */
>> hdmi_phy_i2c_write(hdmi, 0x0006, 0x17);
>> @@ -1454,21 +1374,29 @@ static void imx_hdmi_encoder_prepare(struct drm_encoder *encoder)
>> struct imx_hdmi *hdmi = container_of(encoder, struct imx_hdmi, encoder);
>>
>> imx_hdmi_poweroff(hdmi);
>> - imx_drm_panel_format(encoder, V4L2_PIX_FMT_RGB24);
>> +
>> + if (hdmi->plat_data->encoder_prepare)
>> + hdmi->plat_data->encoder_prepare(&hdmi->connector, encoder);
>> }
>>
>> static void imx_hdmi_encoder_commit(struct drm_encoder *encoder)
>> {
>> struct imx_hdmi *hdmi = container_of(encoder, struct imx_hdmi, encoder);
>> - int mux = imx_drm_encoder_get_mux_id(hdmi->dev->of_node, encoder);
>>
>> - imx_hdmi_set_ipu_di_mux(hdmi, mux);
>> + if (hdmi->plat_data->encoder_commit)
>> + hdmi->plat_data->encoder_commit(hdmi->priv, encoder);
>>
>> imx_hdmi_poweron(hdmi);
>> }
>>
>> +void imx_hdmi_connector_destroy(struct drm_connector *connector)
>> +{
>> + drm_connector_unregister(connector);
>> + drm_connector_cleanup(connector);
>> +}
>> +
>> static struct drm_encoder_funcs imx_hdmi_encoder_funcs = {
>> - .destroy = imx_drm_encoder_destroy,
>> + .destroy = drm_encoder_cleanup,
>> };
>>
>> static struct drm_encoder_helper_funcs imx_hdmi_encoder_helper_funcs = {
>> @@ -1484,7 +1412,7 @@ static struct drm_connector_funcs imx_hdmi_connector_funcs = {
>> .dpms = drm_helper_connector_dpms,
>> .fill_modes = drm_helper_probe_single_connector_modes,
>> .detect = imx_hdmi_connector_detect,
>> - .destroy = imx_drm_connector_destroy,
>> + .destroy = imx_hdmi_connector_destroy,
>> };
>>
>> static struct drm_connector_helper_funcs imx_hdmi_connector_helper_funcs = {
>> @@ -1540,12 +1468,10 @@ static irqreturn_t imx_hdmi_irq(int irq, void *dev_id)
>>
>> static int imx_hdmi_register(struct drm_device *drm, struct imx_hdmi *hdmi)
>> {
>> - int ret;
>> + struct drm_encoder *encoder = &hdmi->encoder;
>> + struct device *dev = hdmi->dev;
>>
>> - ret = imx_drm_encoder_parse_of(drm, &hdmi->encoder,
>> - hdmi->dev->of_node);
>> - if (ret)
>> - return ret;
>> + encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
>>
>> hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
>>
>> @@ -1565,50 +1491,16 @@ static int imx_hdmi_register(struct drm_device *drm, struct imx_hdmi *hdmi)
>> return 0;
>> }
>>
>> -static struct platform_device_id imx_hdmi_devtype[] = {
>> - {
>> - .name = "imx6q-hdmi",
>> - .driver_data = IMX6Q_HDMI,
>> - }, {
>> - .name = "imx6dl-hdmi",
>> - .driver_data = IMX6DL_HDMI,
>> - }, { /* sentinel */ }
>> -};
>> -MODULE_DEVICE_TABLE(platform, imx_hdmi_devtype);
>> -
>> -static const struct of_device_id imx_hdmi_dt_ids[] = {
>> -{ .compatible = "fsl,imx6q-hdmi", .data = &imx_hdmi_devtype[IMX6Q_HDMI], },
>> -{ .compatible = "fsl,imx6dl-hdmi", .data = &imx_hdmi_devtype[IMX6DL_HDMI], },
>> -{ /* sentinel */ }
>> -};
>> -MODULE_DEVICE_TABLE(of, imx_hdmi_dt_ids);
>> -
>> static int imx_hdmi_bind(struct device *dev, struct device *master, void *data)
>> {
>> struct platform_device *pdev = to_platform_device(dev);
>> - const struct of_device_id *of_id =
>> - of_match_device(imx_hdmi_dt_ids, dev);
>> + struct imx_hdmi *hdmi = platform_get_drvdata(pdev);
>> struct drm_device *drm = data;
>> struct device_node *np = dev->of_node;
>> struct device_node *ddc_node;
>> - struct imx_hdmi *hdmi;
>> struct resource *iores;
>> int ret, irq;
>>
>> - hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
>> - if (!hdmi)
>> - return -ENOMEM;
>> -
>> - hdmi->dev = dev;
>> - hdmi->sample_rate = 48000;
>> - hdmi->ratio = 100;
>> -
>> - if (of_id) {
>> - const struct platform_device_id *device_id = of_id->data;
>> -
>> - hdmi->dev_type = device_id->driver_data;
>> - }
>> -
>> ddc_node = of_parse_phandle(np, "ddc-i2c-bus", 0);
>> if (ddc_node) {
>> hdmi->ddc = of_find_i2c_adapter_by_node(ddc_node);
>> @@ -1635,40 +1527,8 @@ static int imx_hdmi_bind(struct device *dev, struct device *master, void *data)
>> if (IS_ERR(hdmi->regs))
>> return PTR_ERR(hdmi->regs);
>>
>> - hdmi->regmap = syscon_regmap_lookup_by_phandle(np, "gpr");
>> - if (IS_ERR(hdmi->regmap))
>> - return PTR_ERR(hdmi->regmap);
>> -
>> - hdmi->isfr_clk = devm_clk_get(hdmi->dev, "isfr");
>> - if (IS_ERR(hdmi->isfr_clk)) {
>> - ret = PTR_ERR(hdmi->isfr_clk);
>> - dev_err(hdmi->dev,
>> - "Unable to get HDMI isfr clk: %d\n", ret);
>> - return ret;
>> - }
>> -
>> - ret = clk_prepare_enable(hdmi->isfr_clk);
>> - if (ret) {
>> - dev_err(hdmi->dev,
>> - "Cannot enable HDMI isfr clock: %d\n", ret);
>> - return ret;
>> - }
>> -
>> - hdmi->iahb_clk = devm_clk_get(hdmi->dev, "iahb");
>> - if (IS_ERR(hdmi->iahb_clk)) {
>> - ret = PTR_ERR(hdmi->iahb_clk);
>> - dev_err(hdmi->dev,
>> - "Unable to get HDMI iahb clk: %d\n", ret);
>> - goto err_isfr;
>> - }
>> -
>> - ret = clk_prepare_enable(hdmi->iahb_clk);
>> - if (ret) {
>> - dev_err(hdmi->dev,
>> - "Cannot enable HDMI iahb clock: %d\n", ret);
>> - goto err_isfr;
>> - }
>> -
>> + if (hdmi->plat_data->setup)
>> + hdmi->priv = hdmi->plat_data->setup(pdev);
>> /* Product and revision IDs */
>> dev_info(dev,
>> "Detected HDMI controller 0x%x:0x%x:0x%x:0x%x\n",
>> @@ -1696,11 +1556,11 @@ static int imx_hdmi_bind(struct device *dev, struct device *master, void *data)
>>
>> ret = imx_hdmi_fb_registered(hdmi);
>> if (ret)
>> - goto err_iahb;
>> + return ret;
>>
>> ret = imx_hdmi_register(drm, hdmi);
>> if (ret)
>> - goto err_iahb;
>> + return ret;
>>
>> /* Unmute interrupts */
>> hdmi_writeb(hdmi, ~HDMI_IH_PHY_STAT0_HPD, HDMI_IH_MUTE_PHY_STAT0);
>> @@ -1708,13 +1568,6 @@ static int imx_hdmi_bind(struct device *dev, struct device *master, void *data)
>> dev_set_drvdata(dev, hdmi);
>>
>> return 0;
>> -
>> -err_iahb:
>> - clk_disable_unprepare(hdmi->iahb_clk);
>> -err_isfr:
>> - clk_disable_unprepare(hdmi->isfr_clk);
>> -
>> - return ret;
>> }
>>
>> static void imx_hdmi_unbind(struct device *dev, struct device *master,
>> @@ -1727,9 +1580,8 @@ static void imx_hdmi_unbind(struct device *dev, struct device *master,
>>
>> hdmi->connector.funcs->destroy(&hdmi->connector);
>> hdmi->encoder.funcs->destroy(&hdmi->encoder);
>> -
>> - clk_disable_unprepare(hdmi->iahb_clk);
>> - clk_disable_unprepare(hdmi->isfr_clk);
>> + if (hdmi->plat_data->exit)
>> + hdmi->plat_data->exit(hdmi->priv);
>> i2c_put_adapter(hdmi->ddc);
>> }
>>
>> @@ -1749,17 +1601,32 @@ static int imx_hdmi_platform_remove(struct platform_device *pdev)
>> return 0;
>> }
>>
>> -static struct platform_driver imx_hdmi_driver = {
>> - .probe = imx_hdmi_platform_probe,
>> - .remove = imx_hdmi_platform_remove,
>> - .driver = {
>> - .name = "imx-hdmi",
>> - .owner = THIS_MODULE,
>> - .of_match_table = imx_hdmi_dt_ids,
>> - },
>> -};
>> +int imx_hdmi_platform_register(struct platform_device *pdev,
>> + const struct imx_hdmi_plat_data *plat_data)
>> +{
>> + struct imx_hdmi *hdmi;
>> +
>> + hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
>> + if (!hdmi)
>> + return -ENOMEM;
>> +
>> + hdmi->plat_data = plat_data;
>> + hdmi->dev = &pdev->dev;
>> + hdmi->dev_type = plat_data->dev_type;
>> + hdmi->sample_rate = 48000;
>> + hdmi->ratio = 100;
>> +
>> + platform_set_drvdata(pdev, hdmi);
>>
>> -module_platform_driver(imx_hdmi_driver);
>> + return imx_hdmi_platform_probe(pdev);
>> +}
>> +EXPORT_SYMBOL_GPL(imx_hdmi_platform_register);
>> +
>> +int imx_hdmi_platform_unregister(struct platform_device *pdev)
>> +{
>> + return imx_hdmi_platform_remove(pdev);
>> +}
>> +EXPORT_SYMBOL_GPL(imx_hdmi_platform_unregister);
>>
>> MODULE_AUTHOR("Sascha Hauer <s.hauer at pengutronix.de>");
>> MODULE_DESCRIPTION("i.MX6 HDMI transmitter driver");
>> diff --git a/drivers/staging/imx-drm/imx-hdmi.h b/drivers/staging/imx-drm/imx-hdmi.h
>> index 39b6776..e67d60d 100644
>> --- a/drivers/staging/imx-drm/imx-hdmi.h
>> +++ b/drivers/staging/imx-drm/imx-hdmi.h
>> @@ -1029,4 +1029,47 @@ enum {
>> HDMI_A_VIDPOLCFG_HSYNCPOL_ACTIVE_HIGH = 0x2,
>> HDMI_A_VIDPOLCFG_HSYNCPOL_ACTIVE_LOW = 0x0,
>> };
>> +
>> +enum {
>> + RES_8,
>> + RES_10,
>> + RES_12,
>> + RES_MAX,
>> +};
>> +
>> +enum imx_hdmi_devtype {
>> + IMX6Q_HDMI,
>> + IMX6DL_HDMI,
>> +};
>> +
>> +struct mpll_config {
>> + unsigned long mpixelclock;
>> + struct {
>> + u16 cpce;
>> + u16 gmp;
>> + } res[RES_MAX];
>> +};
>> +
>> +struct curr_ctrl {
>> + unsigned long mpixelclock;
>> + u16 curr[RES_MAX];
>> +};
>> +
>> +struct imx_hdmi_plat_data {
>> + void * (*setup)(struct platform_device *pdev);
>> + void (*exit)(void *priv);
>> + void (*encoder_commit)(void *priv, struct drm_encoder *encoder);
>> + void (*encoder_prepare)(struct drm_connector *connector,
>> + struct drm_encoder *encoder);
>> + enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
>> + struct drm_display_mode *mode);
>> + const struct mpll_config *mpll_cfg;
>> + const struct curr_ctrl *cur_ctr;
>> + enum imx_hdmi_devtype dev_type;
>> +
>> +};
>> +
>> +int imx_hdmi_platform_register(struct platform_device *pdev,
>> + const struct imx_hdmi_plat_data *plat_data);
>> +int imx_hdmi_platform_unregister(struct platform_device *pdev);
>> #endif /* __IMX_HDMI_H__ */
>>
>
>
