On 10/21/2014 01:31 PM, Jianqun wrote: > This patch is to add support for rockchip board with max98090 codec. > It also needs sound node in dt file. > > Tested on rockchip board based on rk3288. > > Signed-off-by: Jianqun <jay.xu at rock-chips.com> > --- > sound/soc/rockchip/Kconfig | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/sound/soc/rockchip/Kconfig b/sound/soc/rockchip/Kconfig > index 78fc159..482cbba 100644 > --- a/sound/soc/rockchip/Kconfig > +++ b/sound/soc/rockchip/Kconfig > @@ -9,3 +9,16 @@ config SND_SOC_ROCKCHIP > > config SND_SOC_ROCKCHIP_I2S > tristate > + depends on CLKDEV_LOOKUP && SND_SOC_ROCKCHIP > + help > + Say Y or M if you want to add support for I2S driver for Rockchip > + I2S device. > + > +config SND_SOC_ROCKCHIP_MAX98090 > + tristate "ASoC support Rockchip board with max98090" > + depends on I2C && GPIOLIB > + select SND_SOC_ROCKCHIP_I2S > + select SND_SOC_MAX98090 > + help > + Say Y or M here if you want to add support for Rockchio board using > + a max98090 codec. > Just make the max98090 driver directly selectable. That's what we typically do for DT based designs. - Lars
