Hi
On 10/30/2014 05:53 AM, Heiko St?bner wrote:
> Am Mittwoch, 29. Oktober 2014, 13:50:20 schrieb Doug Anderson:
>> Kever,
>>
>> On Wed, Oct 29, 2014 at 3:06 AM, Kever Yang <kever.yang at rock-chips.com>
> wrote:
>>> The rockchip clock driver use CLK_IGNORE_UNUSED flag to make sure
>>> all the clocks are available like default power on state.
>>> We have implement the clock manage in most of rockchip drivers,
>>> it is time to remove it for power save.
>>> Instead we add CLK_IGNORE_UNUSED for some clock nodes which should
>>> be on during boot or no module driver in kernel will initialize it.
>>>
>>> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
>>> ---
>>>
>>> drivers/clk/rockchip/clk-rk3188.c | 32 ++++-----
>>> drivers/clk/rockchip/clk-rk3288.c | 146
>>> +++++++++++++++++++------------------- drivers/clk/rockchip/clk.c
>>> | 9 ---
>>> 3 files changed, 90 insertions(+), 97 deletions(-)
>> Your patch didn't seem to apply to the top of Heiko's
>> "v3.19-clk/next". Where should it apply to?
I apply the patch on the top of linux-next, I will apply it on Heiko's
"v3.19-clk/next" next version.
>>
>>> - GATE(ACLK_CPU, "aclk_cpu", "aclk_cpu_pre", 0,
>>> + GATE(0, "aclk_cpu", "aclk_cpu_pre", CLK_IGNORE_UNUSED,
>>>
>>> RK3288_CLKGATE_CON(0), 3, GFLAGS),
>> It seems strange to me that you're removing the ACLK_CPU ID here. Was
>> that on purpose?
Sorry for that, I didn't mean to removing any ID here, will fix in next
version.
>>
>>> - COMPOSITE_NOMUX(PCLK_CPU, "pclk_cpu", "aclk_cpu_pre", 0,
>>> + COMPOSITE_NOMUX(0, "pclk_cpu", "aclk_cpu_pre", CLK_IGNORE_UNUSED,
>>>
>>> RK3288_CLKSEL_CON(1), 12, 3, DFLAGS,
>>> RK3288_CLKGATE_CON(0), 5, GFLAGS),
>> Here too for PCLK_CPU. There are a few others as well.
> yeah, they should keep their clock ids
>
>
>> I'll also say that when I applied this atop my local tree that USB
>> stopped working. I just see:
>>
>> [ 1647.626747] hub 2-1:1.0: hub_port_status failed (err = -110)
>> [ 1657.626746] hub 2-1:1.0: hub_port_status failed (err = -110)
>>
>> ...over and over and over again.
> maybe Kever's dwc2 clock-handling patch [0] might help there, as the dwc2-host
> currently does not seem to do any clock handling at all.
I think Heiko is right, I test in my evb with following change and dwc2
works well:
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -654,8 +654,8 @@ static struct rockchip_clk_branch
rk3288_clk_branches[] __initdata = {
/* hclk_peri gates */
GATE(0, "hclk_peri_matrix", "hclk_peri", CLK_IGNORE_UNUSED,
RK3288_CLKGATE_CON(6), 0, GFLAGS),
- GATE(HCLK_OTG0, "hclk_otg0", "hclk_peri", 0,
RK3288_CLKGATE_CON(7), 4, GFLAGS),
- GATE(HCLK_USBHOST0, "hclk_host0", "hclk_peri", 0,
RK3288_CLKGATE_CON(7), 6, GFLAGS),
+ GATE(HCLK_OTG0, "hclk_otg0", "hclk_peri", CLK_IGNORE_UNUSED,
RK3288_CLKGATE_CON(7), 4, GFLAGS),
+ GATE(HCLK_USBHOST0, "hclk_host0", "hclk_peri",
CLK_IGNORE_UNUSED, RK3288_CLKGATE_CON(7), 6, GFLAGS),
GATE(HCLK_USBHOST1, "hclk_host1", "hclk_peri", 0,
RK3288_CLKGATE_CON(7), 7, GFLAGS),
GATE(HCLK_HSIC, "hclk_hsic", "hclk_peri", 0,
RK3288_CLKGATE_CON(7), 8, GFLAGS),
GATE(0, "hclk_usb_peri", "hclk_peri", CLK_IGNORE_UNUSED,
RK3288_CLKGATE_CON(7), 9, GFLAGS),
- Kever
