Linux Renesas SOC

• Thread Index

• Patchwork housekeeping for: linux-renesas-soc
  • From: patchwork-bot+linux-renesas-soc
• [PATCH v4 13/13] [HACK] dt-bindings: display: bridge: lvds-codec: Absorb thine,thc63lvdm83d.txt
  • From: Fabrizio Castro
• [PATCH v4 12/13] [HACK] drm/bridge: lvds-codec: Enforce device specific compatible strings
  • From: Fabrizio Castro
• [PATCH v4 11/13] ARM: shmobile_defconfig: Enable support for panels from EDT
  • From: Fabrizio Castro
• [PATCH v4 10/13] ARM: dts: iwg20d-q7-common: Add LCD support
  • From: Fabrizio Castro
• [PATCH v4 09/13] dt-bindings: display: bridge: lvds-codec: Document ti,ds90cf384a
  • From: Fabrizio Castro
• [PATCH v4 08/13] dt-bindings: display: bridge: Repurpose lvds-encoder
  • From: Fabrizio Castro
• [PATCH v4 07/13] drm/bridge: lvds-codec: Simplify panel DT node localisation
  • From: Fabrizio Castro
• [PATCH v4 06/13] drm/bridge: lvds-codec: Add "lvds-decoder" support
  • From: Fabrizio Castro
• [PATCH v4 05/13] drm/bridge: Repurpose lvds-encoder.c
  • From: Fabrizio Castro
• [PATCH v4 04/13] dt-bindings: display: bridge: lvds-transmitter: Document "ti,sn75lvds83"
  • From: Fabrizio Castro
• [PATCH v4 03/13] dt-bindings: display: bridge: lvds-transmitter: Absorb ti,ds90c185.txt
  • From: Fabrizio Castro
• [PATCH v4 02/13] dt-bindings: display: bridge: lvds-transmitter: Document powerdown-gpios
  • From: Fabrizio Castro
• [PATCH v4 01/13] dt-bindings: display: bridge: Convert lvds-transmitter binding to json-schema
  • From: Fabrizio Castro
• [PATCH v4 00/13] Add LCD panel support to iwg20d
  • From: Fabrizio Castro
• Re: [PATCH v7 2/7] dt-bindings: display, renesas,du: Document cmms property
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC] ARM: boot: Relax kernel image alignment for RZ/A with CS3 SDRAM
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC] ARM: boot: Relax kernel image alignment for RZ/A with CS3 SDRAM
  • From: Geert Uytterhoeven
• Re: [PATCH] gpio: em: Use platform_get_irq() to obtain interrupts
  • From: Bartosz Golaszewski
• Re: [PATCH v2 2/2] phy: Renesas R-Car gen3 PCIe PHY driver
  • From: Sergei Shtylyov
• Re: [PATCH] i2c: rcar: Remove superfluous call to clk_get_rate()
  • From: Luca Ceresoli
• Re: [PATCH/RFC] ARM: boot: Relax kernel image alignment for RZ/A with CS3 SDRAM
  • From: Uwe Kleine-König
• Re: [PATCH/RFC] ARM: boot: Relax kernel image alignment for RZ/A with CS3 SDRAM
  • From: Russell King - ARM Linux admin
• Re: [PATCH/RFC] ARM: boot: Relax kernel image alignment for RZ/A with CS3 SDRAM
  • From: Uwe Kleine-König
• Re: [PATCH/RFC] ARM: boot: Relax kernel image alignment for RZ/A with CS3 SDRAM
  • From: Russell King - ARM Linux admin
• [PATCH/RFC] ARM: boot: Relax kernel image alignment for RZ/A with CS3 SDRAM
  • From: Geert Uytterhoeven
• Patchwork housekeeping for: linux-renesas-soc
  • From: patchwork-bot+linux-renesas-soc
• [PATCH] pinctrl: sh-pfc: Make legacy function GPIO handling less fragile
  • From: Geert Uytterhoeven
• [PATCH] pinctrl: sh-pfc: r8a77965: Fix DU_DOTCLKIN3 drive/bias control
  • From: Geert Uytterhoeven
• [PATCH] i2c: rcar: Remove superfluous call to clk_get_rate()
  • From: Geert Uytterhoeven
• [PATCH] gpio: em: Use platform_get_irq() to obtain interrupts
  • From: Geert Uytterhoeven
• [PATCH] iio: adc: max9611: Make enum relations more future proof
  • From: Geert Uytterhoeven
• [PATCH v7 3/7] drm: rcar-du: Add support for CMM
  • From: Jacopo Mondi
• [PATCH v7 2/7] dt-bindings: display, renesas,du: Document cmms property
  • From: Jacopo Mondi
• [PATCH v7 1/7] dt-bindings: display: renesas,cmm: Add R-Car CMM documentation
  • From: Jacopo Mondi
• [PATCH v7 6/7] drm: rcar-du: crtc: Register GAMMA_LUT properties
  • From: Jacopo Mondi
• [PATCH v7 7/7] drm: rcar-du: kms: Expand comment in vsps parsing routine
  • From: Jacopo Mondi
• [PATCH v7 5/7] drm: rcar-du: crtc: Control CMM operations
  • From: Jacopo Mondi
• [PATCH v7 4/7] drm: rcar-du: kms: Initialize CMM instances
  • From: Jacopo Mondi
• [PATCH v7 0/7] drm: rcar-du: Add Color Management Module (CMM)
  • From: Jacopo Mondi
• Re: [PATCH] iio: adc: max9611: Fix too short conversion time delay
  • From: Jacopo Mondi
• Re: [PATCH] iio: adc: max9611: Fix too short conversion time delay
  • From: Geert Uytterhoeven
• Re: [PATCH] iio: adc: max9611: Defer probe on POR read
  • From: Geert Uytterhoeven
• Re: [PATCH] iio: adc: max9611: Fix too short conversion time delay
  • From: Jacopo Mondi
• [PATCH] iio: adc: max9611: Fix too short conversion time delay
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] pinctrl: rza1: remove unnecerssary static inline function
  • From: Jacopo Mondi
• Re: [PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION
  • From: Jacopo Mondi
• Re: [PATCH] dt-bindings: usb: renesas_usbhs: convert bindings to json-schema
  • From: Geert Uytterhoeven
• Re: [PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION
  • From: kbuild test robot
• Re: [PATCH 3/5] PCI: rcar: Add R-Car PCIe endpoint device tree bindings
  • From: Rob Herring
• [PATCH AUTOSEL 4.19 091/209] media: rcar-vin: fix redeclaration of symbol
  • From: Sasha Levin
• RE: [PATCH v4 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Yoshihiro Shimoda
• Re: [PATCH] mmc: renesas_sdhi_internal_dmac: Add MMC_CAP_ERASE to Gen3 SoCs
  • From: Wolfram Sang
• Re: [PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] pinctrl: rza1: remove unnecerssary static inline function
  • From: Geert Uytterhoeven
• Re: [PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION
  • From: Bjorn Andersson
• [PATCH 2/2] pinctrl: Use new GPIO_LINE_DIRECTION
  • From: Matti Vaittinen
• [PATCH 1/2] pinctrl: rza1: remove unnecerssary static inline function
  • From: Matti Vaittinen
• [PATCH] mmc: renesas_sdhi_internal_dmac: Add MMC_CAP_ERASE to Gen3 SoCs
  • From: Eugeniu Rosca
• Re: [PATCH v2 2/2] rcar-vin: Add support for V4L2_FIELD_SEQ_{TB,BT}
  • From: Jacopo Mondi
• Re: [PATCH v4 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Lorenzo Pieralisi
• Re: [PATCH v4 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Geert Uytterhoeven
• Re: [PATCH] dt-bindings: rcar-csi2: Convert bindings to json-schema
  • From: Jacopo Mondi
• Re: [PATCH v4 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Lorenzo Pieralisi
• Re: [PATCH 3/3] dt-bindings: rcar-vin: Convert bindings to json-schema
  • From: Jacopo Mondi
• Re: [PATCH] i2c: remove helpers for ref-counting clients
  • From: Luca Ceresoli
• Re: [PATCH] i2c: remove helpers for ref-counting clients
  • From: Geert Uytterhoeven
• RE: [PATCH v4 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Yoshihiro Shimoda
• RE: [PATCH v4 1/2] Revert "PCI: rcar: Fix missing MACCTLR register setting in rcar_pcie_hw_init()"
  • From: Yoshihiro Shimoda
• Re: [PATCH] i2c: remove helpers for ref-counting clients
  • From: Jean Delvare
• Re: [PATCH v2] media: bindings: video-interfaces: Update the example
  • From: Sakari Ailus
• Re: [PATCH v4 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Lorenzo Pieralisi
• Re: [PATCH v4 1/2] Revert "PCI: rcar: Fix missing MACCTLR register setting in rcar_pcie_hw_init()"
  • From: Lorenzo Pieralisi
• Re: [PATCH v3 0/6] iommu/ipmmu-vmsa: minor updates
  • From: Joerg Roedel
• Patchwork housekeeping for: linux-renesas-soc
  • From: patchwork-bot+linux-renesas-soc
• [PATCH v2] media: bindings: video-interfaces: Update the example
  • From: Jacopo Mondi
• Re: [PATCH v5 0/8] drm: rcar-du: Add Color Management Module (CMM)
  • From: Jacopo Mondi
• [PATCH] dt-bindings: media: renesas,ceu: Convert to yaml
  • From: Jacopo Mondi
• RE: [PATCH v5 0/8] drm: rcar-du: Add Color Management Module (CMM)
  • From: Kalakodima Venkata Rajesh (RBEI/ECF3)
• Re: [PATCH] i2c: remove helpers for ref-counting clients
  • From: Niklas Söderlund
• Re: [PATCH v3] clk: clk-gpio: propagate rate change to parent
  • From: Ardelean, Alexandru
• Re: [PATCH] iio: adc: max9611: Defer probe on POR read
  • From: Geert Uytterhoeven
• Re: [PATCH] iio: adc: max9611: Defer probe on POR read
  • From: Jonathan Cameron
• [PATCH] media: v4l2-subdev: remove wrong @cond from kdocs
  • From: Wolfram Sang
• Re: [PATCH 3/3] dt-bindings: rcar-vin: Convert bindings to json-schema
  • From: Hans Verkuil
• Re: [PATCH] dt-bindings: rcar-csi2: Convert bindings to json-schema
  • From: Hans Verkuil
• [PATCH AUTOSEL 4.19 004/191] media: vsp1: Fix YCbCr planar formats pitch calculation
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 003/191] media: vsp1: Fix vsp1_regs.h license header
  • From: Sasha Levin
• [PATCH AUTOSEL 4.14 058/109] phy: renesas: rcar-gen3-usb2: fix vbus_ctrl for role sysfs
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 105/191] phy: renesas: rcar-gen3-usb2: fix vbus_ctrl for role sysfs
  • From: Sasha Levin
• [PATCH] i2c: remove helpers for ref-counting clients
  • From: Wolfram Sang
• Re: [PATCH v2 2/2] rcar-vin: Add support for V4L2_FIELD_SEQ_{TB,BT}
  • From: Hans Verkuil
• Re: [PATCH v3] clk: clk-gpio: propagate rate change to parent
  • From: Stephen Boyd
• RE: [PATCH 1/4] drm/bridge: Repurpose lvds-encoder.c
  • From: Fabrizio Castro
• Re: [PATCH v3 2/7] drm/bridge: Repurpose lvds-encoder.c
  • From: Laurent Pinchart
• [PATCH AUTOSEL 4.19 168/205] arm64: dts: renesas: r8a77965: Fix HS-USB compatible
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 167/205] arm64: dts: renesas: r8a77965: Attach the SYS-DMAC to the IPMMU
  • From: Sasha Levin
• RE: [PATCH v3 6/7] ARM: dts: iwg20d-q7-common: Add LCD support
  • From: Fabrizio Castro
• [PATCH AUTOSEL 4.19 169/205] arm64: dts: renesas: r8a77965: Fix clock/reset for usb2_phy1
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 166/205] arm64: dts: renesas: salvator-common: adv748x: Override secondary addresses
  • From: Sasha Levin
• Re: [PATCH v3 2/7] drm/bridge: Repurpose lvds-encoder.c
  • From: Jacopo Mondi
• Re: [PATCH v3 2/7] drm/bridge: Repurpose lvds-encoder.c
  • From: Laurent Pinchart
• Re: [PATCH v3 2/7] drm/bridge: Repurpose lvds-encoder.c
  • From: Laurent Pinchart
• Re: [PATCH v3 1/7] dt-bindings: display: bridge: Convert lvds-transmitter binding to json-schema
  • From: Laurent Pinchart
• RE: [PATCH v3 5/7] drm/panel: panel-simple: Add connector type for etm0700g0dh6
  • From: Fabrizio Castro
• Re: [PATCH v3 2/7] drm/bridge: Repurpose lvds-encoder.c
  • From: Jacopo Mondi
• Re: [PATCH 2/3] dt-bindings: rcar-vin: Document compatibility string for R8A77470
  • From: Geert Uytterhoeven
• RE: [PATCH v3 4/7] drm: Define DRM_MODE_CONNECTOR_PARALLEL
  • From: Fabrizio Castro
• RE: [PATCH v3 3/7] dt-bindings: display: bridge: Repurpose lvds-encoder
  • From: Fabrizio Castro
• Re: [PATCH 1/3] dt-bindings: rcar-vin: Remove paragraph about aliases
  • From: Geert Uytterhoeven
• RE: [PATCH v3 2/7] drm/bridge: Repurpose lvds-encoder.c
  • From: Fabrizio Castro
• Re: [PATCH 1/4] drm/bridge: Repurpose lvds-encoder.c
  • From: Geert Uytterhoeven
• RE: [PATCH v3 1/7] dt-bindings: display: bridge: Convert lvds-transmitter binding to json-schema
  • From: Fabrizio Castro
• Re: [PATCH v3 7/7] ARM: shmobile_defconfig: Enable support for panels from EDT
  • From: Geert Uytterhoeven
• Re: [PATCH 3/5] PCI: rcar: Add R-Car PCIe endpoint device tree bindings
  • From: Geert Uytterhoeven
• Re: [PATCH v2 0/2] Add definition for GPIO direction
  • From: Nandor Han
• Patchwork housekeeping for: linux-renesas-soc
  • From: patchwork-bot+linux-renesas-soc
• [PATCH v3] clk: clk-gpio: propagate rate change to parent
  • From: Alexandru Ardelean
• [PATCH v2] clk: clk-gpio: propagate rate change to parent
  • From: Alexandru Ardelean
• [PATCH] dt-bindings: rcar-csi2: Convert bindings to json-schema
  • From: Niklas Söderlund
• [PATCH 3/3] dt-bindings: rcar-vin: Convert bindings to json-schema
  • From: Niklas Söderlund
• [PATCH 1/3] dt-bindings: rcar-vin: Remove paragraph about aliases
  • From: Niklas Söderlund
• [PATCH 0/3] dt-bindings: rcar-vin: Convert bindings to json-schema
  • From: Niklas Söderlund
• [PATCH 2/3] dt-bindings: rcar-vin: Document compatibility string for R8A77470
  • From: Niklas Söderlund
• Re: [PATCH 3/5] PCI: rcar: Add R-Car PCIe endpoint device tree bindings
  • From: Lad, Prabhakar
• Re: [PATCH v2 1/4] drm/bridge: Repurpose lvds-encoder.c
  • From: Jacopo Mondi
• Re: [PATCH v3 7/7] ARM: shmobile_defconfig: Enable support for panels from EDT
  • From: Laurent Pinchart
• Re: [PATCH v3 6/7] ARM: dts: iwg20d-q7-common: Add LCD support
  • From: Laurent Pinchart
• Re: [PATCH v3 5/7] drm/panel: panel-simple: Add connector type for etm0700g0dh6
  • From: Laurent Pinchart
• Re: [PATCH v3 4/7] drm: Define DRM_MODE_CONNECTOR_PARALLEL
  • From: Laurent Pinchart
• Re: [PATCH v3 3/7] dt-bindings: display: bridge: Repurpose lvds-encoder
  • From: Laurent Pinchart
• Re: [PATCH v3 2/7] drm/bridge: Repurpose lvds-encoder.c
  • From: Laurent Pinchart
• Re: [PATCH v3 1/7] dt-bindings: display: bridge: Convert lvds-transmitter binding to json-schema
  • From: Laurent Pinchart
• Patchwork housekeeping for: linux-renesas-soc
  • From: patchwork-bot+linux-renesas-soc
• [PATCH v3 7/7] ARM: shmobile_defconfig: Enable support for panels from EDT
  • From: Fabrizio Castro
• [PATCH v3 6/7] ARM: dts: iwg20d-q7-common: Add LCD support
  • From: Fabrizio Castro
• [PATCH v3 5/7] drm/panel: panel-simple: Add connector type for etm0700g0dh6
  • From: Fabrizio Castro
• [PATCH v3 4/7] drm: Define DRM_MODE_CONNECTOR_PARALLEL
  • From: Fabrizio Castro
• [PATCH v3 3/7] dt-bindings: display: bridge: Repurpose lvds-encoder
  • From: Fabrizio Castro
• [PATCH v3 2/7] drm/bridge: Repurpose lvds-encoder.c
  • From: Fabrizio Castro
• [PATCH v3 1/7] dt-bindings: display: bridge: Convert lvds-transmitter binding to json-schema
  • From: Fabrizio Castro
• [PATCH v3 0/7] Add LCD panel support to iwg20d
  • From: Fabrizio Castro
• Re: [PATCH 3/5] PCI: rcar: Add R-Car PCIe endpoint device tree bindings
  • From: Geert Uytterhoeven
• RE: [PATCH v2 1/4] drm/bridge: Repurpose lvds-encoder.c
  • From: Fabrizio Castro
• Re: [PATCH v3 7/8] [HACK] arm64: dts: renesas: draak: Enable LVDS
  • From: Laurent Pinchart
• Re: [PATCH v3 6/8] arm64: dts: renesas: Add EK874 board with idk-2121wr display support
  • From: Laurent Pinchart
• Re: [PATCH v3 5/8] drm: bridge: thc63: Do not report input bus mode through bridge timings
  • From: Laurent Pinchart
• Re: [PATCH v3 4/8] drm: rcar-du: lvds: Add dual-LVDS panels support
  • From: Laurent Pinchart
• RE: [PATCH v2 2/4] dt-bindings: display: bridge: Repurpose lvds-encoder
  • From: Fabrizio Castro
• Re: [PATCH v3 3/8] drm: Add bus timings helper
  • From: Daniel Vetter
• Re: [PATCH v3 3/8] drm: Add bus timings helper
  • From: Laurent Pinchart
• Re: [PATCH v2 1/4] drm/bridge: Repurpose lvds-encoder.c
  • From: Jacopo Mondi
• Re: [PATCH v3 2/8] dt-bindings: display: Add idk-2121wr binding
  • From: Laurent Pinchart
• Re: [PATCH v3 1/8] dt-bindings: display: Add bindings for LVDS bus-timings
  • From: Laurent Pinchart
• Re: [PATCH v3] dt-bindings: usb: renesas_usbhs: convert bindings to json-schema
  • From: Rob Herring
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Andrew Murray
• Re: [PATCH v2 0/2] Add definition for GPIO direction
  • From: Sebastian Reichel
• Re: [PATCH] rcar-vin: Use correct pixel format when aligning format
  • From: Sergei Shtylyov
• Re: [PATCH 3/5] PCI: rcar: Add R-Car PCIe endpoint device tree bindings
  • From: Lad, Prabhakar
• Re: [PATCH v2 0/2] Add definition for GPIO direction
  • From: andriy.shevchenko@xxxxxxxxxxxxxxx
• Re: [PATCH v2 0/2] Add definition for GPIO direction
  • From: Vaittinen, Matti
• Re: [PATCH 3/5] PCI: rcar: Add R-Car PCIe endpoint device tree bindings
  • From: Geert Uytterhoeven
• Re: [PATCH v2 0/2] Add definition for GPIO direction
  • From: Geert Uytterhoeven
• Re: [PATCH v2 0/2] Add definition for GPIO direction
  • From: Linus Walleij
• Re: [PATCH] rcar-vin: Limit NV12 availability to supported VIN channels only
  • From: Geert Uytterhoeven
• Re: [PATCH 3/5] PCI: rcar: Add R-Car PCIe endpoint device tree bindings
  • From: Lad, Prabhakar
• Re: [PATCH] rcar-vin: Limit NV12 availability to supported VIN channels only
  • From: Niklas Söderlund
• Re: [PATCH] rcar-vin: Limit NV12 availability to supported VIN channels only
  • From: Geert Uytterhoeven
• RE: [PATCH 3/5] PCI: rcar: Add R-Car PCIe endpoint device tree bindings
  • From: Biju Das
• Patchwork housekeeping for: linux-renesas-soc
  • From: patchwork-bot+linux-renesas-soc
• [PATCH v3] dt-bindings: usb: renesas_usbhs: convert bindings to json-schema
  • From: Yoshihiro Shimoda
• RE: [PATCH v2] dt-bindings: usb: renesas_usbhs: convert bindings to json-schema
  • From: Yoshihiro Shimoda
• Re: [PATCH 2/3] drm: rcar-du: Recognize "renesas,vsps" in addition to "vsps"
  • From: Laurent Pinchart
• Re: [PATCH 1/3] dt-bindings: display: renesas: du: Add vendor prefix to vsps property
  • From: Laurent Pinchart
• Re: [PATCH 3/3] arm64: dts: renesas: rcar-gen3: Replace "vsps" by "renesas,vsps"
  • From: Laurent Pinchart
• Re: [PATCH v2] dt-bindings: usb: renesas: usb3-peri: convert bindings to json-schema
  • From: Rob Herring
• Re: [PATCH v2] dt-bindings: usb: renesas_usbhs: convert bindings to json-schema
  • From: Rob Herring
• Re: [PATCH 1/3] dt-bindings: display: renesas: du: Add vendor prefix to vsps property
  • From: Rob Herring
• Re: [PATCH v3 6/6] iommu/ipmmu-vmsa: Add utlb_offset_base
  • From: Niklas Söderlund
• Re: [PATCH v3 5/6] iommu/ipmmu-vmsa: Add helper functions for "uTLB" registers
  • From: Niklas Söderlund
• Re: [PATCH v3 4/6] iommu/ipmmu-vmsa: Calculate context registers' offset instead of a macro
  • From: Niklas Söderlund
• Re: [PATCH v3 3/6] iommu/ipmmu-vmsa: Add helper functions for MMU "context" registers
  • From: Niklas Söderlund
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Marek Vasut
• Re: [PATCH v3 2/6] iommu/ipmmu-vmsa: tidyup register definitions
  • From: Niklas Söderlund
• Re: [PATCH v3 1/6] iommu/ipmmu-vmsa: Remove all unused register definitions
  • From: Niklas Söderlund
• [PATCH] rcar-vin: Use correct pixel format when aligning format
  • From: Niklas Söderlund
• [PATCH] rcar-vin: Limit NV12 availability to supported VIN channels only
  • From: Niklas Söderlund
• Re: [GIT PULL] clk: renesas: Updates for v5.5
  • From: Stephen Boyd
• [PATCH 2/5] pci: endpoint: add support to handle multiple base for mapping outbound memory
  • From: Lad Prabhakar
• [PATCH 4/5] pci: rcar: add support for rcar pcie controller in endpoint mode
  • From: Lad Prabhakar
• [PATCH 5/5] misc: pci_endpoint_test: add device-id for RZ/G2 pcie controller
  • From: Lad Prabhakar
• [PATCH 3/5] PCI: rcar: Add R-Car PCIe endpoint device tree bindings
  • From: Lad Prabhakar
• [PATCH 1/5] pci: pcie-rcar: preparation for adding endpoint support
  • From: Lad Prabhakar
• [PATCH 0/5] Add support for PCIe controller to work in endpoint mode on R-Car SoCs.
  • From: Lad Prabhakar
• Re: [GIT PULL] clk: renesas: Updates for v5.5 (take two)
  • From: Stephen Boyd
• Re: [PATCH v2 2/2] phy: Renesas R-Car gen3 PCIe PHY driver
  • From: Eugeniu Rosca
• Patchwork housekeeping for: linux-renesas-soc
  • From: patchwork-bot+linux-renesas-soc
• [PATCH v2] dt-bindings: usb: renesas: usb3-peri: convert bindings to json-schema
  • From: Yoshihiro Shimoda
• [PATCH v2] dt-bindings: usb: renesas_usbhs: convert bindings to json-schema
  • From: Yoshihiro Shimoda
• Patchwork housekeeping for: linux-renesas-soc
  • From: patchwork-bot+linux-renesas-soc
• [PATCH v3 5/6] iommu/ipmmu-vmsa: Add helper functions for "uTLB" registers
  • From: Yoshihiro Shimoda
• [PATCH v3 6/6] iommu/ipmmu-vmsa: Add utlb_offset_base
  • From: Yoshihiro Shimoda
• [PATCH v3 3/6] iommu/ipmmu-vmsa: Add helper functions for MMU "context" registers
  • From: Yoshihiro Shimoda
• [PATCH v3 4/6] iommu/ipmmu-vmsa: Calculate context registers' offset instead of a macro
  • From: Yoshihiro Shimoda
• [PATCH v3 2/6] iommu/ipmmu-vmsa: tidyup register definitions
  • From: Yoshihiro Shimoda
• [PATCH v3 1/6] iommu/ipmmu-vmsa: Remove all unused register definitions
  • From: Yoshihiro Shimoda
• [PATCH v3 0/6] iommu/ipmmu-vmsa: minor updates
  • From: Yoshihiro Shimoda
• Re: [PATCH v2] dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
  • From: Rob Herring
• Re: [PATCH v2] dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
  • From: Rob Herring
• Re: [PATCH v2 2/2] phy: Renesas R-Car gen3 PCIe PHY driver
  • From: Sergei Shtylyov
• Re: [PATCH v6 0/8] drm: rcar-du: Add Color Management Module (CMM)
  • From: Laurent Pinchart
• [PATCH 3/3] arm64: dts: renesas: rcar-gen3: Replace "vsps" by "renesas,vsps"
  • From: Geert Uytterhoeven
• [PATCH 0/3] dt-bindings: display: renesas: du: Add vendor prefix to vsps property
  • From: Geert Uytterhoeven
• [PATCH 2/3] drm: rcar-du: Recognize "renesas,vsps" in addition to "vsps"
  • From: Geert Uytterhoeven
• [PATCH 1/3] dt-bindings: display: renesas: du: Add vendor prefix to vsps property
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/4] dt-bindings: display: bridge: Repurpose lvds-encoder
  • From: Rob Herring
• Re: [PATCH v6 0/8] drm: rcar-du: Add Color Management Module (CMM)
  • From: Geert Uytterhoeven
• renesas-drivers-2019-11-05-v5.4-rc6
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/2] gpio: em: Use proper irq_chip name
  • From: Linus Walleij
• Patchwork housekeeping for: linux-renesas-soc
  • From: patchwork-bot+linux-renesas-soc
• [PATCH v4 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Yoshihiro Shimoda
• [PATCH v4 1/2] Revert "PCI: rcar: Fix missing MACCTLR register setting in rcar_pcie_hw_init()"
  • From: Yoshihiro Shimoda
• [PATCH v4 0/2] PCI: rcar: Fix missing MACCTLR register setting (take2)
  • From: Yoshihiro Shimoda
• RE: [PATCH v3 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Yoshihiro Shimoda
• Re: [PATCH 10/62] gpio: gpio-bd9571mwv: Use new GPIO_LINE_DIRECTION
  • From: Geert Uytterhoeven
• Re: [PATCH v3 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Geert Uytterhoeven
• [PATCH 10/62] gpio: gpio-bd9571mwv: Use new GPIO_LINE_DIRECTION
  • From: Matti Vaittinen
• RE: [PATCH v3 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Yoshihiro Shimoda
• Re: [PATCH v3 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Geert Uytterhoeven
• RE: [PATCH v2 2/4] dt-bindings: display: bridge: Repurpose lvds-encoder
  • From: Fabrizio Castro
• RE: [PATCH v3 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Yoshihiro Shimoda
• Re: [PATCH v3 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Geert Uytterhoeven
• Re: [PATCH v3 1/2] Revert "PCI: rcar: Fix missing MACCTLR register setting in rcar_pcie_hw_init()"
  • From: Geert Uytterhoeven
• Patchwork housekeeping for: linux-renesas-soc
  • From: patchwork-bot+linux-renesas-soc
• [PATCH v3 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Yoshihiro Shimoda
• [PATCH v3 1/2] Revert "PCI: rcar: Fix missing MACCTLR register setting in rcar_pcie_hw_init()"
  • From: Yoshihiro Shimoda
• [PATCH v3 0/2] PCI: rcar: Fix missing MACCTLR register setting (take2)
  • From: Yoshihiro Shimoda
• RE: [PATCH 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Yoshihiro Shimoda
• Re: [PATCH v2 2/4] dt-bindings: display: bridge: Repurpose lvds-encoder
  • From: Rob Herring
• Patchwork housekeeping for: linux-renesas-soc
  • From: patchwork-bot+linux-renesas-soc
• [PATCH v2 4/4] ARM: shmobile_defconfig: Enable support for panels from EDT
  • From: Fabrizio Castro
• [PATCH v2 3/4] ARM: dts: iwg20d-q7-common: Add LCD support
  • From: Fabrizio Castro
• [PATCH v2 2/4] dt-bindings: display: bridge: Repurpose lvds-encoder
  • From: Fabrizio Castro
• [PATCH v2 1/4] drm/bridge: Repurpose lvds-encoder.c
  • From: Fabrizio Castro
• [PATCH v2 0/4] Add LCD panel support to iwg20d
  • From: Fabrizio Castro
• Re: [PATCH 1/4] drm/bridge: Repurpose lvds-encoder.c
  • From: Neil Armstrong
• Re: [PATCH v2 0/2] gpio: renesas: Use proper irq_chip name
  • From: Linus Walleij
• Re: [PATCH v2 1/2] gpio: em: Use proper irq_chip name
  • From: Bartosz Golaszewski
• Re: [PATCH v2 2/2] gpio: rcar: Use proper irq_chip name
  • From: Linus Walleij
• Re: [PATCH v2 1/2] gpio: em: Use proper irq_chip name
  • From: Linus Walleij
• Re: [PATCH v2 2/2] phy: Renesas R-Car gen3 PCIe PHY driver
  • From: Eugeniu Rosca
• RE: [PATCH 1/4] drm/bridge: Repurpose lvds-encoder.c
  • From: Fabrizio Castro
• RE: [PATCH 2/4] dt-bindings: display: bridge: Repurpose lvds-encoder
  • From: Fabrizio Castro
• Re: [PATCH] dt-bindings: arm: renesas: Add R-Car M3-N ULCB with Kingfisher
  • From: Geert Uytterhoeven
• Re: [PATCH 1/4] drm/bridge: Repurpose lvds-encoder.c
  • From: Neil Armstrong
• Re: [PATCH 2/4] dt-bindings: display: bridge: Repurpose lvds-encoder
  • From: Neil Armstrong
• Re: [PATCH -next 01/30] pinctrl: pxa25x: use devm_platform_ioremap_resource() to simplify code
  • From: Yuehaibing
• Re: [PATCH -next 01/30] pinctrl: pxa25x: use devm_platform_ioremap_resource() to simplify code
  • From: Linus Walleij
• Re: [GIT PULL] pinctrl: sh-pfc: Updates for v5.5 (take two)
  • From: Linus Walleij
• Re: [PATCH v3 06/25] PCI: faraday: Use pci_parse_request_of_pci_ranges()
  • From: Linus Walleij
• [GIT PULL] pinctrl: sh-pfc: Updates for v5.5 (take two)
  • From: Geert Uytterhoeven
• [GIT PULL] clk: renesas: Updates for v5.5 (take two)
  • From: Geert Uytterhoeven
• [GIT PULL 6/6] Renesas DT binding updates for v5.5 (take two)
  • From: Geert Uytterhoeven
• [GIT PULL 4/6] Renesas ARM64 DT updates for v5.5 (take two)
  • From: Geert Uytterhoeven
• [GIT PULL 3/6] Renesas ARM64 defconfig updates for v5.5 (take two)
  • From: Geert Uytterhoeven
• [GIT PULL 1/6] Renesas ARM defconfig updates for v5.5
  • From: Geert Uytterhoeven
• [GIT PULL 5/6] Renesas driver updates for v5.5 (take two)
  • From: Geert Uytterhoeven
• [GIT PULL 2/6] Renesas ARM SoC updates for v5.5
  • From: Geert Uytterhoeven
• [GIT PULL 0/6] Renesas SoC updates for v5.5 (take two)
  • From: Geert Uytterhoeven
• Re: [PATCH] soc: renesas: Add missing check for non-zero product register address
  • From: Geert Uytterhoeven
• Re: [PATCH v2] pinctrl: sh-pfc: Do not use platform_get_irq() to count interrupts
  • From: Geert Uytterhoeven
• Re: [PATCH 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Andrew Murray
• Re: [PATCH v2 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Eugeniu Rosca
• Re: [PATCH 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Eugeniu Rosca
• Patchwork housekeeping for: linux-renesas-soc
  • From: patchwork-bot+linux-renesas-soc
• [PATCH v2] dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
  • From: Yoshihiro Shimoda
• [PATCH v2] dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
  • From: Yoshihiro Shimoda
• [PATCH v3 4/4] clk: renesas: rcar-usb2-clock-sel: Add reset_control
  • From: Yoshihiro Shimoda
• [PATCH v3 2/4] dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add power-domains and resets properties
  • From: Yoshihiro Shimoda
• [PATCH v3 3/4] clk: renesas: rcar-usb2-clock-sel: Add multiple clocks management
  • From: Yoshihiro Shimoda
• [PATCH v3 0/4] clk: renesas: rcar-usb2-clock-sel: Fix clks/resets handling
  • From: Yoshihiro Shimoda
• [PATCH v3 1/4] dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix clock[-name]s properties
  • From: Yoshihiro Shimoda
• Patchwork housekeeping for: linux-renesas-soc
  • From: patchwork-bot+linux-renesas-soc
• RE: [PATCH 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Yoshihiro Shimoda
• [PATCH v2 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Yoshihiro Shimoda
• [PATCH v2 0/2] PCI: rcar: Fix missing MACCTLR register setting (take2)
  • From: Yoshihiro Shimoda
• [PATCH v2 1/2] Revert "PCI: rcar: Fix missing MACCTLR register setting in rcar_pcie_hw_init()"
  • From: Yoshihiro Shimoda
• RE: [PATCH 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Yoshihiro Shimoda
• Re: [PATCH v3 00/25] PCI host resource consolidation
  • From: Lorenzo Pieralisi
• Re: [PATCH v3 19/25] PCI: of: Add inbound resource parsing to helpers
  • From: Lorenzo Pieralisi
• Re: [PATCH v4] PCI: of: Add inbound resource parsing to helpers
  • From: Lorenzo Pieralisi
• Re: [PATCH v4] PCI: of: Add inbound resource parsing to helpers
  • From: Srinath Mannam
• [PATCH v4] PCI: of: Add inbound resource parsing to helpers
  • From: Rob Herring
• Re: [PATCH v3 19/25] PCI: of: Add inbound resource parsing to helpers
  • From: Rob Herring
• Re: [PATCH 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Eugeniu Rosca
• Re: [PATCH v3] replace timeconst bc script with an sh script
  • From: Ethan Sommer
• Re: [PATCH] mmc: renesas_sdhi_internal_dmac: Add r8a774b1 support
  • From: Ulf Hansson
• Re: [PATCH v3 19/25] PCI: of: Add inbound resource parsing to helpers
  • From: Lorenzo Pieralisi
• Re: [PATCH v2 2/4] dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add power-domains and resets properties
  • From: Rob Herring
• Re: [PATCH v2 1/4] dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix clock[-name]s properties
  • From: Rob Herring
• [PATCH 4/4] ARM: shmobile_defconfig: Enable support for panels from EDT
  • From: Fabrizio Castro
• [PATCH 3/4] ARM: dts: iwg20d-q7-common: Add LCD support
  • From: Fabrizio Castro
• [PATCH 2/4] dt-bindings: display: bridge: Repurpose lvds-encoder
  • From: Fabrizio Castro
• [PATCH 1/4] drm/bridge: Repurpose lvds-encoder.c
  • From: Fabrizio Castro
• [PATCH 0/4] Add LCD panel support to iwg20d
  • From: Fabrizio Castro
• Re: [PATCH 1/2] Revert "PCI: rcar: Fix missing MACCTLR register setting in rcar_pcie_hw_init()"
  • From: Greg KH
• Re: [PATCH v3 19/25] PCI: of: Add inbound resource parsing to helpers
  • From: Robin Murphy
• Re: [PATCH v3 19/25] PCI: of: Add inbound resource parsing to helpers
  • From: Lorenzo Pieralisi
• Re: [PATCH v3] replace timeconst bc script with an sh script
  • From: Kieran Bingham
• [PATCH 2/2] PCI: rcar: Fix missing MACCTLR register setting in initialize sequence
  • From: Yoshihiro Shimoda
• [PATCH 1/2] Revert "PCI: rcar: Fix missing MACCTLR register setting in rcar_pcie_hw_init()"
  • From: Yoshihiro Shimoda
• [PATCH 0/2] PCI: rcar: Fix missing MACCTLR register setting (take2)
  • From: Yoshihiro Shimoda
• RE: [PATCH v4] PCI: rcar: Fix missing MACCTLR register setting in rcar_pcie_hw_init()
  • From: Yoshihiro Shimoda
• Re: [PATCH v4] PCI: rcar: Fix missing MACCTLR register setting in rcar_pcie_hw_init()
  • From: Geert Uytterhoeven
• Re: [PATCH v3 19/25] PCI: of: Add inbound resource parsing to helpers
  • From: Srinath Mannam
• RE: [PATCH] dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
  • From: Yoshihiro Shimoda
• RE: [PATCH v4] PCI: rcar: Fix missing MACCTLR register setting in rcar_pcie_hw_init()
  • From: Yoshihiro Shimoda
• Re: [PATCH v3 19/25] PCI: of: Add inbound resource parsing to helpers
  • From: Bjorn Helgaas
• Re: [PATCH] dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
  • From: Rob Herring
• Re: [PATCH] media: dt-bindings: rcar_vin: Document RZ/G1 per-board settings
  • From: Rob Herring
• Re: [PATCH] dt-bindings: usb: renesas: usb3-peri: convert bindings to json-schema
  • From: Rob Herring
• Re: [PATCH] dt-bindings: usb: renesas_usbhs: convert bindings to json-schema
  • From: Rob Herring
• Re: [PATCH v3 19/25] PCI: of: Add inbound resource parsing to helpers
  • From: Lorenzo Pieralisi
• Re: [PATCH v3 07/25] PCI: iproc: Use pci_parse_request_of_pci_ranges()
  • From: Florian Fainelli
• Re: [PATCH v3 23/25] PCI: iproc: Use inbound resources for setup
  • From: Srinath Mannam
• Re: [PATCH v3 07/25] PCI: iproc: Use pci_parse_request_of_pci_ranges()
  • From: Srinath Mannam
• Re: [PATCH v3 19/25] PCI: of: Add inbound resource parsing to helpers
  • From: Srinath Mannam
• Re: [PATCH v4] PCI: rcar: Fix missing MACCTLR register setting in rcar_pcie_hw_init()
  • From: Eugeniu Rosca
• Re: [PATCH V4 1/2] PCI: rcar: Move the inbound index check
  • From: Lorenzo Pieralisi
• RE: [PATCH V4 2/2] PCI: rcar: Recalculate inbound range alignment for each controller entry
  • From: Yoshihiro Shimoda
• Re: [PATCH v3 19/25] PCI: of: Add inbound resource parsing to helpers
  • From: Lorenzo Pieralisi
• Re: [PATCH V4 2/2] PCI: rcar: Recalculate inbound range alignment for each controller entry
  • From: Lorenzo Pieralisi
• RE: [PATCH v3 09/25] PCI: mobiveil: Use pci_parse_request_of_pci_ranges()
  • From: Z.q. Hou
• RE: [PATCH] dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
  • From: Yoshihiro Shimoda
• Re: [PATCH] dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
  • From: Rob Herring
• Re: [PATCH] dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
  • From: Rob Herring
• Re: [PATCH] dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix typo in example
  • From: Rob Herring
• Re: [PATCH] dt-bindings: clock: renesas: Remove R-Car Gen2 legacy DT bindings
  • From: Rob Herring
• RE: [PATCH V4 2/2] PCI: rcar: Recalculate inbound range alignment for each controller entry
  • From: Yoshihiro Shimoda
• Patchwork housekeeping for: linux-renesas-soc
  • From: patchwork-bot+linux-renesas-soc
• [PATCH v3 25/25] PCI: Make devm_of_pci_get_host_bridge_resources() static
  • From: Rob Herring
• [PATCH v3 24/25] PCI: rcar: Use inbound resources for setup
  • From: Rob Herring
• [PATCH v3 23/25] PCI: iproc: Use inbound resources for setup
  • From: Rob Herring
• [PATCH v3 22/25] PCI: xgene: Use inbound resources for setup
  • From: Rob Herring
• [PATCH v3 21/25] PCI: v3-semi: Use inbound resources for setup
  • From: Rob Herring
• [PATCH v3 20/25] PCI: ftpci100: Use inbound resources for setup
  • From: Rob Herring
• [PATCH v3 19/25] PCI: of: Add inbound resource parsing to helpers
  • From: Rob Herring
• [PATCH v3 18/25] PCI: versatile: Enable COMPILE_TEST
  • From: Rob Herring
• [PATCH v3 17/25] PCI: versatile: Remove usage of PHYS_OFFSET
  • From: Rob Herring
• [PATCH v3 16/25] PCI: versatile: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v3 15/25] PCI: xilinx-nwl: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v3 14/25] PCI: xilinx: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v3 13/25] PCI: xgene: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v3 12/25] PCI: v3-semi: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v3 11/25] PCI: rockchip: Drop storing driver private outbound resource data
  • From: Rob Herring
• [PATCH v3 10/25] PCI: rockchip: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v3 09/25] PCI: mobiveil: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v3 08/25] PCI: mediatek: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v3 07/25] PCI: iproc: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v3 06/25] PCI: faraday: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v3 05/25] PCI: dwc: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v3 04/25] PCI: altera: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v3 03/25] PCI: aardvark: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v3 02/25] PCI: Export pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v3 01/25] resource: Add a resource_list_first_type helper
  • From: Rob Herring
• [PATCH v3 00/25] PCI host resource consolidation
  • From: Rob Herring
• RE: [PATCH] mmc: renesas_sdhi_internal_dmac: Add r8a774b1 support
  • From: Biju Das
• Re: [PATCH V4 2/2] PCI: rcar: Recalculate inbound range alignment for each controller entry
  • From: Lorenzo Pieralisi
• RE: [PATCH V4 2/2] PCI: rcar: Recalculate inbound range alignment for each controller entry
  • From: Yoshihiro Shimoda
• RE: [PATCH V4 1/2] PCI: rcar: Move the inbound index check
  • From: Yoshihiro Shimoda
• Patchwork housekeeping for: linux-renesas-soc
  • From: patchwork-bot+linux-renesas-soc
• [PATCH v2 1/4] dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix clock[-name]s properties
  • From: Yoshihiro Shimoda
• [PATCH v2 4/4] clk: renesas: rcar-usb2-clock-sel: Add reset_control
  • From: Yoshihiro Shimoda
• [PATCH v2 3/4] clk: renesas: rcar-usb2-clock-sel: Add multiple clocks management
  • From: Yoshihiro Shimoda
• [PATCH v2 0/4] clk: renesas: rcar-usb2-clock-sel: Fix clks/resets handling
  • From: Yoshihiro Shimoda
• [PATCH v2 2/4] dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add power-domains and resets properties
  • From: Yoshihiro Shimoda
• Re: [PATCH 2/4] media: dt-bindings: rcar-csi2: Add R8A774B1 support
  • From: Rob Herring
• Re: [PATCH 1/4] media: dt-bindings: rcar-vin: Add R8A774B1 support
  • From: Rob Herring
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Andrew Murray
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Andrew Murray
• Patchwork housekeeping for: linux-renesas-soc
  • From: patchwork-bot+linux-renesas-soc
• [PATCH V4 2/2] PCI: rcar: Recalculate inbound range alignment for each controller entry
  • From: marek . vasut
• [PATCH V4 1/2] PCI: rcar: Move the inbound index check
  • From: marek . vasut
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Marek Vasut
• Re: [PATCH v2 0/2] gpio: renesas: Use proper irq_chip name
  • From: Bartosz Golaszewski
• Re: [PATCH v2] dt-bindings: serial: sh-sci: Document r8a77961 bindings
  • From: Rob Herring
• Re: [PATCH v2 1/3] dt-bindings: pinctrl: sh-pfc: Document r8a77961 support
  • From: Rob Herring
• Re: [PATCH v2 2/4] dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions
  • From: Rob Herring
• Re: [PATCH v2 1/4] dt-bindings: clock: renesas: cpg-mssr: Document r8a77961 support
  • From: Rob Herring
• Re: [PATCH v2 5/5] dt-bindings: power: Add r8a77961 SYSC power domain definitions
  • From: Rob Herring
• Re: [PATCH v2 4/5] dt-bindings: power: rcar-sysc: Document r8a77961 support
  • From: Rob Herring
• Re: [PATCH v2 3/5] dt-bindings: reset: rcar-rst: Document r8a77961 support
  • From: Rob Herring
• Re: [PATCH v2 2/5] dt-bindings: arm: renesas: Add Salvator-XS board with R-Car M3-W+
  • From: Rob Herring
• Re: [PATCH v2 1/5] dt-bindings: arm: renesas: Document R-Car M3-W+ SoC DT bindings
  • From: Rob Herring
• Re: [PATCH v2] dt-bindings: ata: sata_rcar: Add r8a774b1 support
  • From: Rob Herring
• Re: [PATCH v2 0/5] dt-bindings: arm: renesas: Add core r8a77961 support
  • From: Eugeniu Rosca
• [PATCH] [LOCAL] arm64: renesas_defconfig: Refresh for v5.4-rc1
  • From: Geert Uytterhoeven
• [PATCH] ARM: shmobile: defconfig: Refresh for v5.4-rc1
  • From: Geert Uytterhoeven
• Re: [PATCH v2] dt-bindings: arm: renesas: Convert 'renesas, prr' to json-schema
  • From: Geert Uytterhoeven
• Re: [PATCH] media: fdp1: Fix R-Car M3-N naming in debug message
  • From: Kieran Bingham
• Re: [PATCH 2/3] clk: renesas: rcar-usb2-clock-sel: Add multiple clocks management
  • From: Geert Uytterhoeven
• Re: [PATCH] media: fdp1: Fix R-Car M3-N naming in debug message
  • From: Geert Uytterhoeven
• RE: [PATCH 3/3] clk: renesas: rcar-usb2-clock-sel: Add reset_control
  • From: Yoshihiro Shimoda
• RE: [PATCH 2/3] clk: renesas: rcar-usb2-clock-sel: Add multiple clocks management
  • From: Yoshihiro Shimoda
• Re: [PATCH 3/3] clk: renesas: rcar-usb2-clock-sel: Add reset_control
  • From: Geert Uytterhoeven
• Re: [PATCH 2/3] clk: renesas: rcar-usb2-clock-sel: Add multiple clocks management
  • From: Geert Uytterhoeven
• Re: [PATCH 1/3] dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix clock[-name]s properties
  • From: Geert Uytterhoeven
• Re: [GIT PULL] pinctrl: sh-pfc: Updates for v5.5
  • From: Linus Walleij
• RE: [PATCH v2 07/11] arm64: dts: renesas: Prepare for rename of ARCH_R8A7796 to ARCH_R8A77960
  • From: Yoshihiro Shimoda
• RE: [PATCH v2 02/11] soc: renesas: Add ARCH_R8A77960 for existing R-Car M3-W
  • From: Yoshihiro Shimoda
• RE: [PATCH v2 01/11] soc: renesas: Rename SYSC_R8A7796 to SYSC_R8A77960
  • From: Yoshihiro Shimoda
• RE: [PATCH v2 2/3] pinctrl: sh-pfc: Rename PINCTRL_PFC_R8A7796 to PINCTRL_PFC_R8A77960
  • From: Yoshihiro Shimoda
• RE: [PATCH v2 3/4] clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960
  • From: Yoshihiro Shimoda
• RE: [PATCH 3/3] clk: renesas: rcar-usb2-clock-sel: Add reset_control
  • From: Yoshihiro Shimoda
• RE: [PATCH 2/3] clk: renesas: rcar-usb2-clock-sel: Add multiple clocks management
  • From: Yoshihiro Shimoda
• RE: [PATCH 1/3] dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix clock[-name]s properties
  • From: Yoshihiro Shimoda
• Re: [PATCH] media: dt-bindings: rcar_vin: Document RZ/G1 per-board settings
  • From: Niklas Söderlund
• Re: [PATCH] media: fdp1: Fix R-Car M3-N naming in debug message
  • From: Kieran Bingham
• [PATCH] media: dt-bindings: rcar_vin: Document RZ/G1 per-board settings
  • From: Geert Uytterhoeven
• [PATCH] pinctrl: sh-pfc: sh7734: Fix duplicate TCLK1_B
  • From: Geert Uytterhoeven
• [PATCH] media: fdp1: Fix R-Car M3-N naming in debug message
  • From: Geert Uytterhoeven
• Re: [PATCH v2] pinctrl: sh-pfc: Do not use platform_get_irq() to count interrupts
  • From: Geert Uytterhoeven
• [PATCH v2 0/2] gpio: renesas: Use proper irq_chip name
  • From: Geert Uytterhoeven
• [PATCH v2 2/2] gpio: rcar: Use proper irq_chip name
  • From: Geert Uytterhoeven
• [PATCH v2 1/2] gpio: em: Use proper irq_chip name
  • From: Geert Uytterhoeven
• Re: [PATCH v2] pinctrl: sh-pfc: Do not use platform_get_irq() to count interrupts
  • From: Linus Walleij
• Re: [PATCH 1/3] dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix clock[-name]s properties
  • From: Geert Uytterhoeven
• Re: [PATCH 2/3] clk: renesas: rcar-usb2-clock-sel: Add multiple clocks management
  • From: Geert Uytterhoeven
• Re: [PATCH 3/3] clk: renesas: rcar-usb2-clock-sel: Add reset_control
  • From: Geert Uytterhoeven
• [PATCH 3/3] clk: renesas: rcar-usb2-clock-sel: Add reset_control
  • From: Yoshihiro Shimoda
• [PATCH 1/3] dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix clock[-name]s properties
  • From: Yoshihiro Shimoda
• [PATCH 2/3] clk: renesas: rcar-usb2-clock-sel: Add multiple clocks management
  • From: Yoshihiro Shimoda
• [PATCH 0/3] clk: renesas: rcar-usb2-clock-sel: Fix clks/resets handling
  • From: Yoshihiro Shimoda
• Re: [PATCH v2 3/5] dt-bindings: reset: rcar-rst: Document r8a77961 support
  • From: Philipp Zabel
• RE: [PATCH] mmc: renesas_sdhi_internal_dmac: Add r8a774b1 support
  • From: Biju Das
• Re: [PATCH] mmc: renesas_sdhi_internal_dmac: Add r8a774b1 support
  • From: Wolfram Sang
• Re: [PATCH 4/6] drm/cma-helper: Support DRM_MODE_DUMB_KERNEL_MAP flag
  • From: Laurent Pinchart
• [PATCH v2 01/11] soc: renesas: Rename SYSC_R8A7796 to SYSC_R8A77960
  • From: Geert Uytterhoeven
• [PATCH v2 04/11] soc: renesas: Identify R-Car M3-W+
  • From: Geert Uytterhoeven
• [PATCH v2 10/11] arm64: defconfig: Enable R8A77961 SoC
  • From: Geert Uytterhoeven
• [PATCH v2 00/11] arm64: renesas: Add r8a77961 support
  • From: Geert Uytterhoeven
• [PATCH v2 05/11] soc: renesas: rcar-rst: Add R8A77961 support
  • From: Geert Uytterhoeven
• [PATCH v2 03/11] soc: renesas: Add ARCH_R8A77961 for new R-Car M3-W+
  • From: Geert Uytterhoeven
• [PATCH v2 07/11] arm64: dts: renesas: Prepare for rename of ARCH_R8A7796 to ARCH_R8A77960
  • From: Geert Uytterhoeven
• [PATCH/LOCAL v2 11/11] arm64: renesas_defconfig: Enable R8A77961 SoC
  • From: Geert Uytterhoeven
• [PATCH v2 08/11] arm64: dts: renesas: Add Renesas R8A77961 SoC support
  • From: Geert Uytterhoeven
• [PATCH v2 09/11] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+
  • From: Geert Uytterhoeven
• [PATCH v2 06/11] soc: renesas: rcar-sysc: Add R8A77961 support
  • From: Geert Uytterhoeven
• [PATCH v2 02/11] soc: renesas: Add ARCH_R8A77960 for existing R-Car M3-W
  • From: Geert Uytterhoeven
• [PATCH v2] dt-bindings: serial: sh-sci: Document r8a77961 bindings
  • From: Geert Uytterhoeven
• [PATCH v2 2/3] pinctrl: sh-pfc: Rename PINCTRL_PFC_R8A7796 to PINCTRL_PFC_R8A77960
  • From: Geert Uytterhoeven
• [PATCH v2 3/3] pinctrl: sh-pfc: r8a7796: Add R8A77961 PFC support
  • From: Geert Uytterhoeven
• [PATCH v2 1/3] dt-bindings: pinctrl: sh-pfc: Document r8a77961 support
  • From: Geert Uytterhoeven
• [PATCH v2 0/3] pinctrl: sh-pfc: Add r8a77961 support
  • From: Geert Uytterhoeven
• [PATCH v2 0/4] clk: renesas: Add r8a77961 support
  • From: Geert Uytterhoeven
• [PATCH v2 2/4] dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions
  • From: Geert Uytterhoeven
• [PATCH v2 4/4] clk: renesas: r8a7796: Add R8A77961 CPG/MSSR support
  • From: Geert Uytterhoeven
• [PATCH v2 3/4] clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960
  • From: Geert Uytterhoeven
• [PATCH v2 1/4] dt-bindings: clock: renesas: cpg-mssr: Document r8a77961 support
  • From: Geert Uytterhoeven
• [PATCH v2 2/5] dt-bindings: arm: renesas: Add Salvator-XS board with R-Car M3-W+
  • From: Geert Uytterhoeven
• [PATCH v2 3/5] dt-bindings: reset: rcar-rst: Document r8a77961 support
  • From: Geert Uytterhoeven
• [PATCH v2 1/5] dt-bindings: arm: renesas: Document R-Car M3-W+ SoC DT bindings
  • From: Geert Uytterhoeven
• [PATCH v2 5/5] dt-bindings: power: Add r8a77961 SYSC power domain definitions
  • From: Geert Uytterhoeven
• [PATCH v2 4/5] dt-bindings: power: rcar-sysc: Document r8a77961 support
  • From: Geert Uytterhoeven
• [PATCH v2 0/5] dt-bindings: arm: renesas: Add core r8a77961 support
  • From: Geert Uytterhoeven
• [PATCH v2] dt-bindings: ata: sata_rcar: Add r8a774b1 support
  • From: Fabrizio Castro
• RE: [PATCH 1/2] ata: sata_rcar: Add r8a774b1 support
  • From: Fabrizio Castro
• [PATCH] dt-bindings: usb: renesas: usb3-peri: convert bindings to json-schema
  • From: Yoshihiro Shimoda
• [PATCH] dt-bindings: usb: renesas_usbhs: convert bindings to json-schema
  • From: Yoshihiro Shimoda
• Re: [PATCH 2/2] arm64: dts: renesas: r8a774b1: Add SATA controller node
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] ata: sata_rcar: Add r8a774b1 support
  • From: Geert Uytterhoeven
• Re: [PATCH 4/6] drm/cma-helper: Support DRM_MODE_DUMB_KERNEL_MAP flag
  • From: Rob Herring
• Re: [PATCH 4/6] drm/cma-helper: Support DRM_MODE_DUMB_KERNEL_MAP flag
  • From: Rob Herring
• RE: [PATCH v3 0/8] Add dual-LVDS panel support to EK874
  • From: Fabrizio Castro
• [PATCH 2/2] arm64: dts: renesas: r8a774b1: Add SATA controller node
  • From: Fabrizio Castro
• [PATCH 1/2] ata: sata_rcar: Add r8a774b1 support
  • From: Fabrizio Castro
• [PATCH 0/2] Add SATA support to RZ/G2N
  • From: Fabrizio Castro
• Re: [PATCH 4/6] drm/cma-helper: Support DRM_MODE_DUMB_KERNEL_MAP flag
  • From: Geert Uytterhoeven
• Re: [PATCH 4/6] drm/cma-helper: Support DRM_MODE_DUMB_KERNEL_MAP flag
  • From: Laurent Pinchart
• Re: [PATCH 4/6] drm/cma-helper: Support DRM_MODE_DUMB_KERNEL_MAP flag
  • From: Neil Armstrong
• RE: [PATCH] mmc: renesas_sdhi_internal_dmac: Add r8a774b1 support
  • From: Biju Das
• Re: [PATCH 4/6] drm/cma-helper: Support DRM_MODE_DUMB_KERNEL_MAP flag
  • From: james qian wang (Arm Technology China)
• [PATCH 4/6] drm/cma-helper: Support DRM_MODE_DUMB_KERNEL_MAP flag
  • From: Rob Herring
• Re: [PATCH v2] dt-bindings: i2c: sh_mobile: Add r8a774b1 support
  • From: Wolfram Sang
• Re: [PATCH v2] dt-bindings: i2c: rcar: Add r8a774b1 support
  • From: Wolfram Sang
• Re: [PATCH V3 3/3] PCI: rcar: Recalculate inbound range alignment for each controller entry
  • From: Andrew Murray
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Andrew Murray
• Re: [PATCH V3 1/3] PCI: rcar: Move the inbound index check
  • From: Andrew Murray
• Re: [PATCH] arm64: dts: renesas: r8a774b1: Add VIN and CSI-2 support
  • From: Geert Uytterhoeven
• Re: [PATCH v6 7/8] arm64: dts: renesas: Add CMM units to Gen3 SoCs
  • From: Geert Uytterhoeven
• Re: [PATCH v2 0/8] clk: renesas: rcar-gen2/gen3: Switch to .determine_rate()
  • From: Geert Uytterhoeven
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Geert Uytterhoeven
• Re: [PATCH] media: rcar_drif: fix a memory disclosure
  • From: Geert Uytterhoeven
• Re: [PATCH v2 20/25] PCI: ftpci100: Use inbound resources for setup
  • From: Linus Walleij
• Re: [PATCH v2 18/25] PCI: versatile: Enable COMPILE_TEST
  • From: Linus Walleij
• Re: [PATCH v2 17/25] PCI: versatile: Remove usage of PHYS_OFFSET
  • From: Linus Walleij
• Re: [PATCH v2 16/25] PCI: versatile: Use pci_parse_request_of_pci_ranges()
  • From: Linus Walleij
• Re: [PATCH v2 12/25] PCI: v3-semi: Use pci_parse_request_of_pci_ranges()
  • From: Linus Walleij
• Re: [PATCH 0/4] Add VIN/CSI-2 support
  • From: Niklas Söderlund
• Re: [PATCH v2 05/25] PCI: dwc: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• Re: [PATCH v2 10/25] PCI: rockchip: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Marek Vasut
• Applied "spi: rspi: Use platform_get_irq_byname_optional() for optional irqs" to the spi tree
  • From: Mark Brown
• Applied "ASoC: rsnd: Reinitialize bit clock inversion flag for every format setting" to the asoc tree
  • From: Mark Brown
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Robin Murphy
• Re: [PATCH -next 11/30] pinctrl: msm: use devm_platform_ioremap_resource() to simplify code
  • From: Bjorn Andersson
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Marek Vasut
• Patchwork housekeeping for: linux-renesas-soc
  • From: patchwork-bot+linux-renesas-soc
• Re: [PATCH v2 10/25] PCI: rockchip: Use pci_parse_request_of_pci_ranges()
  • From: Andrew Murray
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Robin Murphy
• Re: [PATCH v2 09/25] PCI: mobiveil: Use pci_parse_request_of_pci_ranges()
  • From: Andrew Murray
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Marek Vasut
• Re: [PATCH v2 07/25] PCI: iproc: Use pci_parse_request_of_pci_ranges()
  • From: Andrew Murray
• Re: [PATCH v2 06/25] PCI: faraday: Use pci_parse_request_of_pci_ranges
  • From: Andrew Murray
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Robin Murphy
• Re: [PATCH v2 05/25] PCI: dwc: Use pci_parse_request_of_pci_ranges()
  • From: Andrew Murray
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Marek Vasut
• Re: [PATCH v2 01/25] resource: Add a resource_list_get_entry_of_type helper
  • From: Andrew Murray
• Re: [PATCH v2 04/25] PCI: altera: Use pci_parse_request_of_pci_ranges()
  • From: Andrew Murray
• Re: [PATCH v2 02/25] PCI: Export pci_parse_request_of_pci_ranges()
  • From: Andrew Murray
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Andrew Murray
• [GIT PULL 0/5] Renesas SoC updates for v5.5
  • From: Geert Uytterhoeven
• [PULL 1/5] Renesas ARM DT updates for v5.5
  • From: Geert Uytterhoeven
• [PULL 3/5] Renesas ARM64 DT updates for v5.5
  • From: Geert Uytterhoeven
• [GIT PULL] clk: renesas: Updates for v5.5
  • From: Geert Uytterhoeven
• [PULL 4/5] Renesas driver updates for v5.5
  • From: Geert Uytterhoeven
• [PULL 2/5] Renesas ARM64 defconfig updates for v5.5
  • From: Geert Uytterhoeven
• [GIT PULL] pinctrl: sh-pfc: Updates for v5.5
  • From: Geert Uytterhoeven
• [PULL 5/5] Renesas DT binding updates for v5.5
  • From: Geert Uytterhoeven
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Geert Uytterhoeven
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Andrew Murray
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Lorenzo Pieralisi
• [PATCH] dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
  • From: Yoshihiro Shimoda
• [PATCH] dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
  • From: Yoshihiro Shimoda
• [PATCH] media: rcar_drif: fix a memory disclosure
  • From: Kangjie Lu
• Re: [PATCH v6 0/8] drm: rcar-du: Add Color Management Module (CMM)
  • From: Laurent Pinchart
• Re: [PATCH v6.1 5/8] drm: rcar-du: crtc: Control CMM operations
  • From: Laurent Pinchart
• Re: [PATCH 6.1 3/8] drm: rcar-du: Add support for CMM
  • From: Laurent Pinchart
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Marek Vasut
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Rob Herring
• Re: [PATCH v6 1/8] dt-bindings: display: renesas,cmm: Add R-Car CMM documentation
  • From: Rob Herring
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Marek Vasut
• [PATCH v6.1 5/8] drm: rcar-du: crtc: Control CMM operations
  • From: Jacopo Mondi
• [PATCH 6.1 3/8] drm: rcar-du: Add support for CMM
  • From: Jacopo Mondi
• Re: drivers/pinctrl/sh-pfc/pfc-sh7734.c multiple define of TCLK1_B
  • From: Geert Uytterhoeven
• Re: [PATCH] MAINTAINERS: Add Marek and Shimoda-san as R-Car PCIE co-maintainers
  • From: Lorenzo Pieralisi
• Re: [PATCH -next 00/30] pinctrl: use devm_platform_ioremap_resource() to simplify code
  • From: Alexandre Belloni
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Robin Murphy
• Re: [PATCH -next 26/30] pinctrl: bm1880: use devm_platform_ioremap_resource() to simplify code
  • From: Manivannan Sadhasivam
• Re: [PATCH -next 28/30] pinctrl: actions: use devm_platform_ioremap_resource() to simplify code
  • From: Manivannan Sadhasivam
• Re: [PATCH] iio: adc: max9611: Defer probe on POR read
  • From: Geert Uytterhoeven
• Re: [PATCH -next 10/30] pinctrl: tegra: use devm_platform_ioremap_resource() to simplify code
  • From: Thierry Reding
• Re: [PATCH -next 27/30] pinctrl: artpec6: use devm_platform_ioremap_resource() to simplify code
  • From: Jesper Nilsson
• [PATCH -next 07/30] pinctrl: ns2: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 05/30] pinctrl: nsp-gpio: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 00/30] pinctrl: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 02/30] pinctrl: pxa27x: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 06/30] pinctrl: nsp: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 08/30] pinctrl: bcm281xx: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 10/30] pinctrl: tegra: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• Re: [PATCH v6 3/8] drm: rcar-du: Add support for CMM
  • From: Laurent Pinchart
• [PATCH -next 14/30] pinctrl: at91: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 11/30] pinctrl: msm: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• Re: [PATCH -next 15/30] pinctrl: oxnas: use devm_platform_ioremap_resource() to simplify code
  • From: Neil Armstrong
• [PATCH -next 17/30] pinctrl: lpc18xx: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 16/30] pinctrl: pistachio: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 20/30] pinctrl: u300: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 13/30] pinctrl: zte: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 19/30] pinctrl: tb10x: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 23/30] pinctrl: rza2: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 27/30] pinctrl: artpec6: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 24/30] pinctrl: digicolor: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 22/30] pinctrl: xway: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 26/30] pinctrl: bm1880: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 30/30] pinctrl: iproc: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 28/30] pinctrl: actions: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 29/30] pinctrl: at91-pio4: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 21/30] pinctrl: vt8500: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 25/30] pinctrl: coh901: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 18/30] pinctrl: da850-pupd: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 15/30] pinctrl: oxnas: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 12/30] pinctrl: spear: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 09/30] pinctrl: sunxi: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 04/30] pinctrl: pic32: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 03/30] pinctrl: cygnus-mux: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• [PATCH -next 01/30] pinctrl: pxa25x: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing
• Re: [PATCH v6 3/8] drm: rcar-du: Add support for CMM
  • From: Jacopo Mondi
• Re: [PATCH v2 11/25] PCI: rockchip: Drop storing driver private outbound resource data
  • From: Rob Herring
• drivers/pinctrl/sh-pfc/pfc-sh7734.c multiple define of TCLK1_B
  • From: Ben Dooks
• Re: [PATCH] MAINTAINERS: Add Marek and Shimoda-san as R-Car PCIE co-maintainers
  • From: Geert Uytterhoeven
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Marek Vasut
• Re: [PATCH] MAINTAINERS: Add Marek and Shimoda-san as R-Car PCIE co-maintainers
  • From: Marek Vasut
• Re: [PATCH] MAINTAINERS: Add Marek and Shimoda-san as R-Car PCIE co-maintainers
  • From: Lorenzo Pieralisi
• Re: [PATCH v2 2/2] rcar-vin: Add support for outputting NV12
  • From: Jacopo Mondi
• Re: [PATCH v2 11/25] PCI: rockchip: Drop storing driver private outbound resource data
  • From: Christoph Hellwig
• Re: [PATCH v2 01/25] resource: Add a resource_list_get_entry_of_type helper
  • From: Christoph Hellwig
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Geert Uytterhoeven
• RE: [PATCH] MAINTAINERS: Add Marek and Shimoda-san as R-Car PCIE co-maintainers
  • From: Yoshihiro Shimoda
• RE: [PATCH] dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix typo in example
  • From: Yoshihiro Shimoda
• Re: [PATCH] ASoC: rsnd: Reinitialize bit clock inversion flag for every format setting
  • From: Kuninori Morimoto
• Re: [PATCH] spi: rspi: Use platform_get_irq_byname_optional() for optional irqs
  • From: Stephen Boyd
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Marek Vasut
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Rob Herring
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Marek Vasut
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Rob Herring
• [PATCH v2 25/25] PCI: Make devm_of_pci_get_host_bridge_resources() static
  • From: Rob Herring
• [PATCH v2 24/25] PCI: rcar: Use inbound resources for setup
  • From: Rob Herring
• [PATCH v2 23/25] PCI: iproc: Use inbound resources for setup
  • From: Rob Herring
• [PATCH v2 22/25] PCI: xgene: Use inbound resources for setup
  • From: Rob Herring
• [PATCH v2 21/25] PCI: v3-semi: Use inbound resources for setup
  • From: Rob Herring
• [PATCH v2 19/25] PCI: of: Add inbound resource parsing to helpers
  • From: Rob Herring
• [PATCH v2 20/25] PCI: ftpci100: Use inbound resources for setup
  • From: Rob Herring
• [PATCH v2 18/25] PCI: versatile: Enable COMPILE_TEST
  • From: Rob Herring
• [PATCH v2 17/25] PCI: versatile: Remove usage of PHYS_OFFSET
  • From: Rob Herring
• [PATCH v2 16/25] PCI: versatile: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v2 15/25] PCI: xilinx-nwl: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v2 14/25] PCI: xilinx: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v2 13/25] PCI: xgene: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v2 12/25] PCI: v3-semi: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v2 11/25] PCI: rockchip: Drop storing driver private outbound resource data
  • From: Rob Herring
• [PATCH v2 10/25] PCI: rockchip: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v2 09/25] PCI: mobiveil: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v2 08/25] PCI: mediatek: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v2 07/25] PCI: iproc: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v2 06/25] PCI: faraday: Use pci_parse_request_of_pci_ranges
  • From: Rob Herring
• [PATCH v2 05/25] PCI: dwc: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v2 04/25] PCI: altera: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v2 03/25] PCI: aardvark: Use pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v2 02/25] PCI: Export pci_parse_request_of_pci_ranges()
  • From: Rob Herring
• [PATCH v2 01/25] resource: Add a resource_list_get_entry_of_type helper
  • From: Rob Herring
• [PATCH v2 00/25] PCI host resource consolidation
  • From: Rob Herring
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Marek Vasut
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Rob Herring
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Lorenzo Pieralisi
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Marek Vasut
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Lorenzo Pieralisi
• [PATCH v4] dt-bindings: display: renesas: du: Document optional reset properties
  • From: Geert Uytterhoeven
• [PATCH] dt-bindings: arm: renesas: Add R-Car M3-N ULCB with Kingfisher
  • From: Geert Uytterhoeven
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Marek Vasut
• [PATCH] ARM: shmobile: rcar-gen2: Drop legacy DT clock support
  • From: Geert Uytterhoeven
• [PATCH] clk: renesas: r8a77965: Remove superfluous semicolon
  • From: Geert Uytterhoeven
• Re: [PATCH] clocksource/drivers/sh_mtu2: Do not loop using platform_get_irq_by_name()
  • From: Daniel Lezcano
• Re: [PATCH v4 0/4] clocksource/drivers/timer-of/renesas-ostm improvements
  • From: Daniel Lezcano
• Re: [PATCH v4 2/4] clocksource/drivers/timer-of: Use unique device name instead of timer
  • From: Rob Herring
• Re: [PATCH V3 2/3] PCI: rcar: Do not abort on too many inbound dma-ranges
  • From: Lorenzo Pieralisi
• [PATCH] dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix typo in example
  • From: Geert Uytterhoeven
• [PATCH] dt-bindings: clock: renesas: Remove R-Car Gen2 legacy DT bindings
  • From: Geert Uytterhoeven
• [PATCH v4 1/4] clocksource/drivers/timer-of: Convert last full_name to %pOF
  • From: Geert Uytterhoeven
• [PATCH v4 2/4] clocksource/drivers/timer-of: Use unique device name instead of timer
  • From: Geert Uytterhoeven
• [PATCH v4 3/4] clocksource/drivers/renesas-ostm: Convert to timer_of
  • From: Geert Uytterhoeven
• [PATCH v4 4/4] clocksource/drivers/renesas-ostm: Use unique device name instead of ostm
  • From: Geert Uytterhoeven
• [PATCH v4 0/4] clocksource/drivers/timer-of/renesas-ostm improvements
  • From: Geert Uytterhoeven
• [PATCH] soc: renesas: Add missing check for non-zero product register address
  • From: Geert Uytterhoeven
• [PATCH] spi: rspi: Use platform_get_irq_byname_optional() for optional irqs
  • From: Geert Uytterhoeven
• [PATCH] clocksource/drivers/sh_mtu2: Do not loop using platform_get_irq_by_name()
  • From: Geert Uytterhoeven
• [PATCH v2] phy: renesas: rcar-gen3-usb2: Use platform_get_irq_optional() for optional irq
  • From: Geert Uytterhoeven
• [PATCH v2] pinctrl: sh-pfc: Do not use platform_get_irq() to count interrupts
  • From: Geert Uytterhoeven
• Re: [PATCH 1/3] v4l2-dev/ioctl: Add V4L2_CAP_IO_MC
  • From: Hans Verkuil
• Re: [PATCH v6 5/8] drm: rcar-du: crtc: Control CMM operations
  • From: Laurent Pinchart
• Re: [PATCH v6 3/8] drm: rcar-du: Add support for CMM
  • From: Laurent Pinchart
• [PATCH] ASoC: rsnd: Reinitialize bit clock inversion flag for every format setting
  • From: Eugeniu Rosca
• [PATCH] MAINTAINERS: Add Marek and Shimoda-san as R-Car PCIE co-maintainers
  • From: Simon Horman
• Re: [PATCH/RFC 17/19] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+
  • From: Eugeniu Rosca
• Re: [PATCH] serial: core: Use cons->index for preferred console registration
  • From: Michal Simek
• [PATCH] iio: adc: max9611: Defer probe on POR read
  • From: Jacopo Mondi
• [PATCH v6 8/8] drm: rcar-du: kms: Expand comment in vsps parsing routine
  • From: Jacopo Mondi