The register definition for the Port K I/O Register is accidentally
using the defines for Port J. Replace them by the proper Port K
defines.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
The runtime-check under development reports:
sh7264_pfc: config reg 0xfffe3932/8 enum_id 234 conflict
sh7264_pfc: config reg 0xfffe3932/9 enum_id 360 conflict
sh7264_pfc: config reg 0xfffe3932/10 enum_id 235 conflict
sh7264_pfc: config reg 0xfffe3932/11 enum_id 361 conflict
sh7264_pfc: config reg 0xfffe3932/12 enum_id 236 conflict
sh7264_pfc: config reg 0xfffe3932/13 enum_id 362 conflict
sh7264_pfc: config reg 0xfffe3932/14 enum_id 237 conflict
sh7264_pfc: config reg 0xfffe3932/15 enum_id 363 conflict
---
drivers/pinctrl/sh-pfc/pfc-sh7264.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7264.c b/drivers/pinctrl/sh-pfc/pfc-sh7264.c
index 4a95867deb8af42a..4117bd8c0f413f99 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh7264.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh7264.c
@@ -2020,18 +2020,18 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
{ PINMUX_CFG_REG("PKIOR0", 0xfffe3932, 16, 1, GROUP(
0, 0, 0, 0, 0, 0, 0, 0,
- PJ11_IN, PJ11_OUT,
- PJ10_IN, PJ10_OUT,
- PJ9_IN, PJ9_OUT,
- PJ8_IN, PJ8_OUT,
- PJ7_IN, PJ7_OUT,
- PJ6_IN, PJ6_OUT,
- PJ5_IN, PJ5_OUT,
- PJ4_IN, PJ4_OUT,
- PJ3_IN, PJ3_OUT,
- PJ2_IN, PJ2_OUT,
- PJ1_IN, PJ1_OUT,
- PJ0_IN, PJ0_OUT ))
+ PK11_IN, PK11_OUT,
+ PK10_IN, PK10_OUT,
+ PK9_IN, PK9_OUT,
+ PK8_IN, PK8_OUT,
+ PK7_IN, PK7_OUT,
+ PK6_IN, PK6_OUT,
+ PK5_IN, PK5_OUT,
+ PK4_IN, PK4_OUT,
+ PK3_IN, PK3_OUT,
+ PK2_IN, PK2_OUT,
+ PK1_IN, PK1_OUT,
+ PK0_IN, PK0_OUT ))
},
{}
};
--
2.17.1
