The FN_SDSELF_B and FN_SD1_CLK_B enum IDs are used twice, which means
one set of users must be wrong. Replace them by the correct enum IDs.
Fixes: 87f8c988636db0d4 ("sh-pfc: Add r8a7778 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
The runtime-check under development reports:
r8a7778_pfc: config reg 0xfffc002c/54 enum_id 613 conflict
r8a7778_pfc: config reg 0xfffc002c/70 enum_id 607 conflict
---
drivers/pinctrl/sh-pfc/pfc-r8a7778.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7778.c b/drivers/pinctrl/sh-pfc/pfc-r8a7778.c
index 24866a5958aee512..a9875038ed9b664e 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7778.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7778.c
@@ -2305,7 +2305,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
FN_ATAG0_A, 0, FN_REMOCON_B, 0,
/* IP0_11_8 [4] */
FN_SD1_DAT2_A, FN_MMC_D2, 0, FN_BS,
- FN_ATADIR0_A, 0, FN_SDSELF_B, 0,
+ FN_ATADIR0_A, 0, FN_SDSELF_A, 0,
FN_PWM4_B, 0, 0, 0,
0, 0, 0, 0,
/* IP0_7_5 [3] */
@@ -2349,7 +2349,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
FN_TS_SDAT0_A, 0, 0, 0,
0, 0, 0, 0,
/* IP1_10_8 [3] */
- FN_SD1_CLK_B, FN_MMC_D6, 0, FN_A24,
+ FN_SD1_CD_A, FN_MMC_D6, 0, FN_A24,
FN_DREQ1_A, 0, FN_HRX0_B, FN_TS_SPSYNC0_A,
/* IP1_7_5 [3] */
FN_A23, FN_HTX0_B, FN_TX2_B, FN_DACK2_A,
--
2.17.1
