Re: [PATCH/RFC 2/2] gpio: of: Add DT overlay support for GPIO hogs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/7/20 1:10 AM, Frank Rowand wrote:
> On 1/6/20 5:34 PM, Frank Rowand wrote:
>> On 12/30/19 7:38 AM, Geert Uytterhoeven wrote:
>>> As GPIO hogs are configured at GPIO controller initialization time,
>>> adding/removing GPIO hogs in DT overlays does not work.
>>>
>>> Add support for GPIO hogs described in DT overlays by registering an OF
>>> reconfiguration notifier, to handle the addition and removal of GPIO hog
>>> subnodes to/from a GPIO controller device node.
>>>
>>> Note that when a GPIO hog device node is being removed, its "gpios"
>>> properties is no longer available, so we have to keep track of which
>>> node a hog belongs to, which is done by adding a pointer to the hog's
>>> device node to struct gpio_desc.
>>
>> If I have read the patches and the existing overlay source correctly,
>> then some observations:
>>
>> - A gpio hog node added in an overlay will be properly processed.
>>
>> - A gpio hog node already existing in the live devicetree, but with a
>>   non-active status will be properly processed if the status of the
>>   gpio hog node is changed to "ok" in the overlay.
>>
>> - If a gpio hog node already exists in the live devicetree with an
>>   active status, then any updated or added properties in that gpio
>>   hog node in the overlay will have no effect.
>>
>>   There is a scenario where the updated property would have an effect:
>>   apply a second overlay that sets the status to inactive, then apply
>>   a third overlay that sets the status back to active.  This is a
>>   rather contrived example and I think it should be documented as
>>   not supported and the result undefined.
> 
> I went back and double checked the related code.  For gpio hog nodes
> that are in a non-overlay, the status property is checked because
> of_gpiochip_scan_gpios() uses for_each_available_child_of_node()
> to search for gpio hog nodes, and for_each_available_child_of_node()
> checks the status property.  But in the case of a gpio hog node
> added by an overlay, of_gpio_notify() does not check the status
> property in the gpio hog node.  The check for the status property
> should be added to of_gpio_notify().

One more thing I have not thought through is the case where the
overlay contains both the gpio node and the gpio hog node.  I'll
walk through that tomorrow.

-Frank

> 
> -Frank
> 
>>
>> It would be good to document this explicitly.
>>
>>
>>>
>>> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
>>> ---
>>>  drivers/gpio/gpiolib-of.c | 84 +++++++++++++++++++++++++++++++++++++++
>>>  drivers/gpio/gpiolib-of.h |  2 +
>>>  drivers/gpio/gpiolib.c    | 14 +++++--
>>>  drivers/gpio/gpiolib.h    |  3 ++
>>>  4 files changed, 100 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
>>> index dfae797846bb746b..89a6138ac0a4b506 100644
>>> --- a/drivers/gpio/gpiolib-of.c
>>> +++ b/drivers/gpio/gpiolib-of.c
>>> @@ -649,6 +649,10 @@ static int of_gpiochip_add_hog(struct gpio_chip *chip, struct device_node *hog)
>>>  		ret = gpiod_hog(desc, name, lflags, dflags);
>>>  		if (ret < 0)
>>>  			return ret;
>>> +
>>> +#ifdef CONFIG_OF_DYNAMIC
>>> +		desc->hog = hog;
>>> +#endif
>>>  	}
>>>  
>>>  	return 0;
>>> @@ -676,11 +680,91 @@ static int of_gpiochip_scan_gpios(struct gpio_chip *chip)
>>>  			of_node_put(np);
>>>  			return ret;
>>>  		}
>>> +
>>> +		of_node_set_flag(np, OF_POPULATED);
>>>  	}
>>>  
>>>  	return 0;
>>>  }
>>>  
>>> +#ifdef CONFIG_OF_DYNAMIC
>>> +/**
>>> + * of_gpiochip_remove_hog - Remove all hogs in a hog device node
>>> + * @chip:	gpio chip to act on
>>> + * @hog:	device node describing the hogs
>>> + */
>>> +static void of_gpiochip_remove_hog(struct gpio_chip *chip,
>>> +				   struct device_node *hog)
>>> +{
>>> +	struct gpio_desc *descs = chip->gpiodev->descs;
>>> +	unsigned int i;
>>> +
>>> +	for (i = 0; i < chip->ngpio; i++) {
>>> +		if (test_bit(FLAG_IS_HOGGED, &descs[i].flags) &&
>>> +		    descs[i].hog == hog)
>>> +			gpiochip_free_own_desc(&descs[i]);
>>> +	}
>>> +}
>>> +
>>> +static int of_gpiochip_match_node(struct gpio_chip *chip, void *data)
>>> +{
>>> +	return chip->gpiodev->dev.of_node == data;
>>> +}
>>> +
>>> +static struct gpio_chip *of_find_gpiochip_by_node(struct device_node *np)
>>> +{
>>> +	return gpiochip_find(np, of_gpiochip_match_node);
>>> +}
>>> +
>>> +static int of_gpio_notify(struct notifier_block *nb, unsigned long action,
>>> +			  void *arg)
>>> +{
>>> +	struct of_reconfig_data *rd = arg;
>>> +	struct gpio_chip *chip;
>>> +	int ret;
>>> +
>>> +	switch (of_reconfig_get_state_change(action, arg)) {
>>> +	case OF_RECONFIG_CHANGE_ADD:
>>> +		if (!of_property_read_bool(rd->dn, "gpio-hog"))
>>> +			return NOTIFY_OK;	/* not for us */
>>> +
>>> +		if (of_node_test_and_set_flag(rd->dn, OF_POPULATED))
>>> +			return NOTIFY_OK;
>>
>> I don't think OF_POPULATED could be already set.  It seems to be a
>> bug if it is.
>>
>>
>>> +
>>> +		chip = of_find_gpiochip_by_node(rd->dn->parent);
>>> +		if (chip == NULL)
>>> +			return NOTIFY_OK;	/* not for us */
>>
>> If I understand correctly, "not for us" is a misleading comment.
>> The notification is for the node rd->dn->parent, but the device
>> does not exist, so we can't do the hogging at the moment.  (If the
>> device is created later, then the gpio hog child node will exist,
>> and the init will "do the right thing" with the hog node -- so
>> not a problem.)
>>
>>  
>>> +
>>> +		ret = of_gpiochip_add_hog(chip, rd->dn);
>>> +		if (ret < 0) {
>>> +			pr_err("%s: failed to add hogs for %pOF\n", __func__,
>>> +			       rd->dn);
>>> +			of_node_clear_flag(rd->dn, OF_POPULATED);
>>> +			return notifier_from_errno(ret);
>>> +		}
>>> +		break;
>>> +
>>> +	case OF_RECONFIG_CHANGE_REMOVE:
>>> +		if (!of_node_check_flag(rd->dn, OF_POPULATED))
>>> +			return NOTIFY_OK;	/* already depopulated */
>>
>> I don't think OF_POPULATED could be already cleared.  It seems to be a
>> bug if it is.
>>
>>> +
>>> +		chip = of_find_gpiochip_by_node(rd->dn->parent);
>>> +		if (chip == NULL)
>>> +			return NOTIFY_OK;	/* not for us */
>>
>> Again, a misleading comment.
>>
>>> +
>>> +		of_gpiochip_remove_hog(chip, rd->dn);
>>> +		of_node_clear_flag(rd->dn, OF_POPULATED);
>>> +		break;
>>> +	}
>>> +
>>> +	return NOTIFY_OK;
>>> +}
>>> +
>>> +struct notifier_block gpio_of_notifier = {
>>> +	.notifier_call = of_gpio_notify,
>>> +};
>>> +#endif /* CONFIG_OF_DYNAMIC */
>>> +
>>>  /**
>>>   * of_gpio_simple_xlate - translate gpiospec to the GPIO number and flags
>>>   * @gc:		pointer to the gpio_chip structure
>>> diff --git a/drivers/gpio/gpiolib-of.h b/drivers/gpio/gpiolib-of.h
>>> index 9768831b1fe2f25b..ed26664f153782fc 100644
>>> --- a/drivers/gpio/gpiolib-of.h
>>> +++ b/drivers/gpio/gpiolib-of.h
>>> @@ -35,4 +35,6 @@ static inline bool of_gpio_need_valid_mask(const struct gpio_chip *gc)
>>>  }
>>>  #endif /* CONFIG_OF_GPIO */
>>>  
>>> +extern struct notifier_block gpio_of_notifier;
>>> +
>>>  #endif /* GPIOLIB_OF_H */
>>> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
>>> index bff5ac774d870b67..ef12cfcaf0962c1c 100644
>>> --- a/drivers/gpio/gpiolib.c
>>> +++ b/drivers/gpio/gpiolib.c
>>> @@ -2952,6 +2952,9 @@ static bool gpiod_free_commit(struct gpio_desc *desc)
>>>  		clear_bit(FLAG_PULL_DOWN, &desc->flags);
>>>  		clear_bit(FLAG_BIAS_DISABLE, &desc->flags);
>>>  		clear_bit(FLAG_IS_HOGGED, &desc->flags);
>>> +#ifdef CONFIG_OF_DYNAMIC
>>> +		desc->hog = NULL;
>>> +#endif
>>>  		ret = true;
>>>  	}
>>>  
>>> @@ -5145,10 +5148,15 @@ static int __init gpiolib_dev_init(void)
>>>  	if (ret < 0) {
>>>  		pr_err("gpiolib: failed to allocate char dev region\n");
>>>  		bus_unregister(&gpio_bus_type);
>>> -	} else {
>>> -		gpiolib_initialized = true;
>>> -		gpiochip_setup_devs();
>>> +		return ret;
>>>  	}
>>> +
>>> +	gpiolib_initialized = true;
>>> +	gpiochip_setup_devs();
>>> +
>>> +	if (IS_ENABLED(CONFIG_OF_DYNAMIC))
>>> +		WARN_ON(of_reconfig_notifier_register(&gpio_of_notifier));
>>> +
>>>  	return ret;
>>>  }
>>>  core_initcall(gpiolib_dev_init);
>>> diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
>>> index a4a759920faa48ab..7af9931e8572304a 100644
>>> --- a/drivers/gpio/gpiolib.h
>>> +++ b/drivers/gpio/gpiolib.h
>>> @@ -118,6 +118,9 @@ struct gpio_desc {
>>>  	const char		*label;
>>>  	/* Name of the GPIO */
>>>  	const char		*name;
>>> +#ifdef CONFIG_OF_DYNAMIC
>>> +	struct device_node	*hog;
>>> +#endif
>>>  };
>>>  
>>>  int gpiod_request(struct gpio_desc *desc, const char *label);
>>>
>>
>>
> 
> 




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux