Re: [PATCH v4] USB: hub: Fix the broken detection of USB3 device in SMSC hub

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Alan, hi Greg,

On Thu, Feb 06, 2020 at 12:49:23PM +0100, Hardik Gajjar wrote:
> Renesas R-Car H3ULCB + Kingfisher Infotainment Board is either not able
> to detect the USB3.0 mass storage devices or is detecting those as
> USB2.0 high speed devices.
> 
> The explanation given by Renesas is that, due to a HW issue, the XHCI
> driver does not wake up after going to sleep on connecting a USB3.0
> device.
> 
> In order to mitigate that, disable the auto-suspend feature
> specifically for SMSC hubs from hub_probe() function, as a quirk.
> 
> Renesas Kingfisher Infotainment Board has two USB3.0 ports (CN2) which
> are connected via USB5534B 4-port SuperSpeed/Hi-Speed, low-power,
> configurable hub controller.
> 
> [1] SanDisk USB 3.0 device detected as USB-2.0 before the patch
>  [   74.036390] usb 5-1.1: new high-speed USB device number 4 using xhci-hcd
>  [   74.061598] usb 5-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
>  [   74.069976] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>  [   74.077303] usb 5-1.1: Product: Ultra
>  [   74.080980] usb 5-1.1: Manufacturer: SanDisk
>  [   74.085263] usb 5-1.1: SerialNumber: 4C530001110208116550
> 
> [2] SanDisk USB 3.0 device detected as USB-3.0 after the patch
>  [   34.565078] usb 6-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
>  [   34.588719] usb 6-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
>  [   34.597098] usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>  [   34.604430] usb 6-1.1: Product: Ultra
>  [   34.608110] usb 6-1.1: Manufacturer: SanDisk
>  [   34.612397] usb 6-1.1: SerialNumber: 4C530001110208116550
> 
> Suggested-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Hardik Gajjar <hgajjar@xxxxxxxxxxxxxx>
> Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> Tested-by: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>

Is there anything else we can do to see the patch accepted?
Do you think it is also relevant for the stable tree?

-- 
Best Regards
Eugeniu Rosca



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux