Linux Renesas SOC

• Thread Index

• [PATCH v3 2/3] arm64: dts: renesas: r8a7795: Add OPPs table for cpu devices
  • From: Simon Horman
• [PATCH v3 3/3] arm64: dts: renesas: r8a7796: Add OPPs table for cpu devices
  • From: Simon Horman
• [PATCH v3 1/3] arm64: dts: renesas: r8a7795: move scif node into alphabetical order
  • From: Simon Horman
• [PATCH v3 0/3] arm64: dts: r8a779[56]: Add OPPs table for cpu devices
  • From: Simon Horman
• [PATCH v4 6/6] clk: renesas: r8a7796: Add Z2 clock
  • From: Simon Horman
• [PATCH v4 5/6] clk: renesas: r8a7796: Add Z clock
  • From: Simon Horman
• [PATCH v4 4/6] clk: renesas: r8a7795: Add Z2 clock
  • From: Simon Horman
• [PATCH v4 3/6] clk: renesas: r8a7795: Add Z clock
  • From: Simon Horman
• [PATCH v4 2/6] clk: renesas: rcar-gen3: Add Z2 clock divider support
  • From: Simon Horman
• [PATCH v4 1/6] clk: renesas: rcar-gen3: Add Z clock divider support
  • From: Simon Horman
• [PATCH v4 0/6] clk: renesas: r8a779[56]: Add Z and Z2 clock support
  • From: Simon Horman
• Re: [PATCH v2 1/9] dt-bindings: media: Add Renesas CEU bindings
  • From: Laurent Pinchart
• Re: [PATCH v2 3/9] v4l: platform: Add Renesas CEU driver
  • From: Laurent Pinchart
• Re: [PATCH v3] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Wolfram Sang
• Re: [PATCH v3] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Wolfram Sang
• Re: [PATCH v2 3/9] v4l: platform: Add Renesas CEU driver
  • From: jacopo mondi
• Re: [PATCH v3] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Geert Uytterhoeven
• Re: [PATCH] gpio: pca953x: add required properties to example in bindings
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/2] arm64: dts: renesas: salvator-x: Remove renesas,no-ether-link property
  • From: Simon Horman
• Re: [1/2] arm64: dts: r8a7795: add thermal cooling management
  • From: Geert Uytterhoeven
• Re: [PATCH] soc: renesas: rcar-sysc: Mark rcar_sysc_matches[] __initconst
  • From: Simon Horman
• Re: [PATCH v2] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Simon Horman
• Re: [1/2] arm64: dts: r8a7795: add thermal cooling management
  • From: Simon Horman
• Re: [PATCH v3 01/34] clk_ops: change round_rate() to return unsigned long
  • From: Mauro Carvalho Chehab
• Re: [PATCH v2 2/9] include: media: Add Renesas CEU driver interface
  • From: jacopo mondi
• Re: [PATCH v2 1/9] dt-bindings: media: Add Renesas CEU bindings
  • From: jacopo mondi
• Re: [1/2] arm64: dts: r8a7795: add thermal cooling management
  • From: Niklas Söderlund
• Re: [PATCH 01/33] clk_ops: change round_rate() to return unsigned long
  • From: Stephen Boyd
• Re: [PATCH] i2c: gpio: add fault injector
  • From: Wolfram Sang
• Re: [PATCH v2 0/9] ARM: dts: gen2: add IP core switcher for all busses
  • From: Wolfram Sang
• Re: [PATCH v2 0/9] ARM: dts: gen2: add IP core switcher for all busses
  • From: Niklas Söderlund
• Re: [PATCH 01/33] clk_ops: change round_rate() to return unsigned long
  • From: Bryan O'Donoghue
• Re: [PATCH 01/33] clk_ops: change round_rate() to return unsigned long
  • From: Stephen Boyd
• Re: [PATCH v2 16/22] mmc: tmio: fix never-detected card insertion bug
  • From: Wolfram Sang
• [PATCH v3 4/4] PM / wakeup: Print warn if device gets enabled as wakeup source during sleep
  • From: Ulf Hansson
• [PATCH v3 3/4] PM / wakeup: Add device_set_wakeup_path() helper to control wakeup path
  • From: Ulf Hansson
• [PATCH v3 2/4] PM / core: Propagate wakeup_path status flag in __device_suspend_late()
  • From: Ulf Hansson
• [PATCH v3 1/4] PM / core: Assign the wakeup_path status flag in __device_prepare()
  • From: Ulf Hansson
• [PATCH v3 0/4] PM / core: Extend behaviour for wakeup paths
  • From: Ulf Hansson
• Re: [PATCH] clk: renesas: r8a7796: Add FDP clock
  • From: Laurent Pinchart
• Re: [PATCH v2 9/9] media: i2c: tw9910: Remove soc_camera dependencies
  • From: Laurent Pinchart
• Re: [PATCH v2 7/9] media: i2c: ov772x: Remove soc_camera dependencies
  • From: Laurent Pinchart
• Re: [PATCH v2 3/3] gpio: rcar: Use WAKEUP_PATH driver PM flag
  • From: Ulf Hansson
• Re: [PATCH v2 5/9] arch: sh: migor: Use new renesas-ceu camera driver
  • From: Laurent Pinchart
• [PATCH] clk: renesas: r8a7796: Add FDP clock
  • From: Geert Uytterhoeven
• [PATCH] clk: renesas: Stop enabling legacy DT clock support by default
  • From: Geert Uytterhoeven
• Re: [PATCH] soc: renesas: rcar-sysc: Mark rcar_sysc_matches[] __initconst
  • From: Geert Uytterhoeven
• Re: [PATCH v2 3/3] gpio: rcar: Use WAKEUP_PATH driver PM flag
  • From: Geert Uytterhoeven
• Re: [PATCH v2 3/3] gpio: rcar: Use WAKEUP_PATH driver PM flag
  • From: Geert Uytterhoeven
• Re: [PATCH v2 4/9] ARM: dts: r7s72100: Add Capture Engine Unit (CEU)
  • From: Laurent Pinchart
• Re: [PATCH v2 3/9] v4l: platform: Add Renesas CEU driver
  • From: Laurent Pinchart
• Re: [PATCH v2 1/3] phy: core: Move runtime PM reference counting to the parent device
  • From: Ulf Hansson
• Re: [PATCH v2 1/4] PM / core: Assign the wakeup_path status flag in __device_prepare()
  • From: Ulf Hansson
• Re: [PATCH v2 16/22] mmc: tmio: fix never-detected card insertion bug
  • From: Wolfram Sang
• Re: [PATCH v2 3/3] gpio: rcar: Use WAKEUP_PATH driver PM flag
  • From: Ulf Hansson
• Re: [PATCH v2 10/22] mmc: tmio: support IP-builtin card detection logic
  • From: Wolfram Sang
• Re: [PATCH v2 09/22] mmc: tmio: use mmc_can_gpio_cd() instead of checking TMIO_MMC_USE_GPIO_CD
  • From: Wolfram Sang
• Re: [PATCH v2 3/3] gpio: rcar: Use WAKEUP_PATH driver PM flag
  • From: Ulf Hansson
• Re: [PATCH v2 4/4] PM / core: Print warn if device gets enabled as wakeup source during sleep
  • From: Ulf Hansson
• Re: [PATCH v2 3/4] PM / Domains: Take WAKEUP_PATH driver flag into account in genpd
  • From: Rafael J. Wysocki
• Re: [PATCH v2 2/9] include: media: Add Renesas CEU driver interface
  • From: Laurent Pinchart
• Re: [PATCH v2 3/4] PM / Domains: Take WAKEUP_PATH driver flag into account in genpd
  • From: Ulf Hansson
• Re: [PATCH v2 1/9] dt-bindings: media: Add Renesas CEU bindings
  • From: Laurent Pinchart
• Re: [PATCH v2 1/4] PM / core: Assign the wakeup_path status flag in __device_prepare()
  • From: Rafael J. Wysocki
• Re: [PATCH v2 1/4] PM / core: Assign the wakeup_path status flag in __device_prepare()
  • From: Ulf Hansson
• Re: [PATCH v2 3/3] gpio: rcar: Use WAKEUP_PATH driver PM flag
  • From: Rafael J. Wysocki
• Re: [PATCH v2 3/3] gpio: rcar: Use WAKEUP_PATH driver PM flag
  • From: Geert Uytterhoeven
• Re: [PATCH v2] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Wolfram Sang
• Re: [PATCH v2 3/3] gpio: rcar: Use WAKEUP_PATH driver PM flag
  • From: Rafael J. Wysocki
• Re: [PATCH v2 3/3] gpio: rcar: Use WAKEUP_PATH driver PM flag
  • From: Rafael J. Wysocki
• Re: [PATCH 1/2] ravb: kill redundant check in the probe() method
  • From: Sergei Shtylyov
• [PATCH] dt-bindings: h8300 clocksource: correct spelling of pulse
  • From: Simon Horman
• Re: [PATCH v2] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Simon Horman
• Re: [PATCH v2 3/3] gpio: rcar: Use WAKEUP_PATH driver PM flag
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/2] arm64: dts: renesas: salvator-x: Remove renesas,no-ether-link property
  • From: Simon Horman
• Re: [PATCH v2 4/9] ARM: dts: r7s72100: Add Capture Engine Unit (CEU)
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/9] dt-bindings: media: Add Renesas CEU bindings
  • From: Geert Uytterhoeven
• Re: [PATCH v2 3/3] gpio: rcar: Use WAKEUP_PATH driver PM flag
  • From: Linus Walleij
• Re: [1/2] arm64: dts: r8a7795: add thermal cooling management
  • From: Simon Horman
• Re: [PATCH v2 6/9] v4l: i2c: Copy ov772x soc_camera sensor driver
  • From: jacopo mondi
• Re: [PATCH 4/9] ARM: dts: koelsch: use demuxer for I2C4
  • From: Geert Uytterhoeven
• Re: [PULL REQUEST] renesas/topic/ip-switch-rework-2017 for renesas drivers
  • From: Geert Uytterhoeven
• Re: [PATCH 2/2] sh_eth: kill redundant check in the probe() method
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] ravb: kill redundant check in the probe() method
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/2] ARM: dts: r8a7743: Add thermal device to DT
  • From: Eduardo Valentin
• Re: [1/2] arm64: dts: r8a7795: add thermal cooling management
  • From: Eduardo Valentin
• Re: [1/2] arm64: dts: r8a7795: add thermal cooling management
  • From: Eduardo Valentin
• Re: [2/2] arm64: dts: r8a7796: add thermal cooling management
  • From: Eduardo Valentin
• Re: [PATCH 01/33] clk_ops: change round_rate() to return unsigned long
  • From: kbuild test robot
• Re: [PATCH 01/33] clk_ops: change round_rate() to return unsigned long
  • From: kbuild test robot
• Re: [PATCH 01/33] clk_ops: change round_rate() to return unsigned long
  • From: kbuild test robot
• Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
  • From: Sergei Shtylyov
• [PATCH 2/2] sh_eth: kill redundant check in the probe() method
  • From: Sergei Shtylyov
• [PATCH 1/2] ravb: kill redundant check in the probe() method
  • From: Sergei Shtylyov
• [PATCH 0/2] Kill redundant checks in the Renesas Ethernet drivers
  • From: Sergei Shtylyov
• Re: [PATCH 01/33] clk_ops: change round_rate() to return unsigned long
  • From: Bryan O'Donoghue
• Re: [PATCH v2 0/3] renesas: irqchip: Use WAKEUP_PATH driver PM flag
  • From: Rafael J. Wysocki
• [PULL REQUEST] renesas/topic/ip-switch-rework-2017 for renesas drivers
  • From: Wolfram Sang
• [PATCH v2 8/9] ARM: dts: gose: use demuxer for I2C2
  • From: Wolfram Sang
• [PATCH v2 9/9] ARM: dts: gose: use demuxer for I2C4
  • From: Wolfram Sang
• [PATCH v2 7/9] ARM: dts: silk: use demuxer for I2C1
  • From: Wolfram Sang
• [PATCH v2 6/9] ARM: dts: alt: use demuxer for I2C1
  • From: Wolfram Sang
• [PATCH v2 5/9] ARM: dts: porter: use demuxer for I2C2
  • From: Wolfram Sang
• [PATCH v2 4/9] ARM: dts: koelsch: use demuxer for I2C4
  • From: Wolfram Sang
• [PATCH v2 1/9] ARM: dts: lager: use demuxer for IIC2/I2C2
  • From: Wolfram Sang
• [PATCH v2 3/9] ARM: dts: koelsch: use demuxer for I2C2
  • From: Wolfram Sang
• [PATCH v2 2/9] ARM: dts: lager: use demuxer for IIC3/I2C3
  • From: Wolfram Sang
• [PATCH v2 0/9] ARM: dts: gen2: add IP core switcher for all busses
  • From: Wolfram Sang
• Re: [PATCH 4/9] ARM: dts: koelsch: use demuxer for I2C4
  • From: Wolfram Sang
• Re: [PATCH v2 0/3] renesas: irqchip: Use WAKEUP_PATH driver PM flag
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/3] irqchip/renesas-intc-irqpin: Use WAKEUP_PATH driver PM flag
  • From: Rafael J. Wysocki
• Re: [PATCH v2 0/3] renesas: irqchip: Use WAKEUP_PATH driver PM flag
  • From: Rafael J. Wysocki
• Re: i2c: algo-bit: init the bus to a known state
  • From: Wolfram Sang
• Re: [PATCH v2 5/9] arch: sh: migor: Use new renesas-ceu camera driver
  • From: kbuild test robot
• Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
  • From: Sergei Shtylyov
• Re: [PATCH v2 4/4] PM / core: Print warn if device gets enabled as wakeup source during sleep
  • From: Rafael J. Wysocki
• Re: [PATCH v2 3/4] PM / Domains: Take WAKEUP_PATH driver flag into account in genpd
  • From: Rafael J. Wysocki
• Re: [PATCH v2 1/4] PM / core: Assign the wakeup_path status flag in __device_prepare()
  • From: Rafael J. Wysocki
• [PATCH v2 0/3] renesas: irqchip: Use WAKEUP_PATH driver PM flag
  • From: Ulf Hansson
• [PATCH v2 1/3] irqchip/renesas-intc-irqpin: Use WAKEUP_PATH driver PM flag
  • From: Ulf Hansson
• [PATCH v2 3/3] gpio: rcar: Use WAKEUP_PATH driver PM flag
  • From: Ulf Hansson
• [PATCH v2 2/3] irqchip/renesas-irqc: Use WAKEUP_PATH driver PM flag
  • From: Ulf Hansson
• Re: [PATCH v2 6/9] v4l: i2c: Copy ov772x soc_camera sensor driver
  • From: Philippe Ombredanne
• [PATCH v2 4/4] PM / core: Print warn if device gets enabled as wakeup source during sleep
  • From: Ulf Hansson
• [PATCH v2 3/4] PM / Domains: Take WAKEUP_PATH driver flag into account in genpd
  • From: Ulf Hansson
• [PATCH v2 2/4] PM / core: Add WAKEUP_PATH driver flag
  • From: Ulf Hansson
• [PATCH v2 0/4] PM / core: Extend behaviour for wakeup paths
  • From: Ulf Hansson
• [PATCH v2 1/4] PM / core: Assign the wakeup_path status flag in __device_prepare()
  • From: Ulf Hansson
• Re: [PATCH/RFC v2 05/15] rcar-csi2: count usage for each source pad
  • From: Sakari Ailus
• Re: [PATCH/RFT v2] gpio: gpio-rcar: Support S2RAM
  • From: Yoshihiro Kaneko
• Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
  • From: Yoshihiro Kaneko
• [PATCH v2 1/9] dt-bindings: media: Add Renesas CEU bindings
  • From: Jacopo Mondi
• [PATCH v2 2/9] include: media: Add Renesas CEU driver interface
  • From: Jacopo Mondi
• [PATCH v2 3/9] v4l: platform: Add Renesas CEU driver
  • From: Jacopo Mondi
• [PATCH v2 5/9] arch: sh: migor: Use new renesas-ceu camera driver
  • From: Jacopo Mondi
• [PATCH v2 4/9] ARM: dts: r7s72100: Add Capture Engine Unit (CEU)
  • From: Jacopo Mondi
• [PATCH v2 7/9] media: i2c: ov772x: Remove soc_camera dependencies
  • From: Jacopo Mondi
• [PATCH v2 8/9] v4l: i2c: Copy tw9910 soc_camera sensor driver
  • From: Jacopo Mondi
• [PATCH v2 9/9] media: i2c: tw9910: Remove soc_camera dependencies
  • From: Jacopo Mondi
• [PATCH v2 6/9] v4l: i2c: Copy ov772x soc_camera sensor driver
  • From: Jacopo Mondi
• [PATCH v2 0/9] Renesas Capture Engine Unit (CEU) V4L2 driver
  • From: Jacopo Mondi
• Re: [PATCH/RFC v2 02/15] rcar-vin: use pad as the starting point for a pipeline
  • From: Sakari Ailus
• Re: [PATCH V2] gpio: of: make example syntactically correct
  • From: Niklas Söderlund
• [PATCH v2] vsp1: fix video output on R8A77970
  • From: Sergei Shtylyov
• Re: [PATCH] vsp1: fix video output on R8A77970
  • From: Sergei Shtylyov
• renesas-drivers-2017-12-26-v4.15-rc5
  • From: Geert Uytterhoeven
• Re: [PATCH 4/9] ARM: dts: koelsch: use demuxer for I2C4
  • From: Geert Uytterhoeven
• Re: [PATCH 1/3] PM / core: Assign the wakeup_path status flag in __device_prepare()
  • From: Rafael J. Wysocki
• [PATCH] vsp1: fix video output on R8A77970
  • From: Sergei Shtylyov
• Re: [PATCH/RFT v2] gpio: gpio-rcar: Support S2RAM
  • From: Vladimir Zapolskiy
• [PATCH/RFT v2] gpio: gpio-rcar: Support S2RAM
  • From: Yoshihiro Kaneko
• Re: [PATCH v2 1/3] phy: core: Move runtime PM reference counting to the parent device
  • From: Rafael J. Wysocki
• [PATCH V2] gpio: of: make example syntactically correct
  • From: Wolfram Sang
• Re: [PATCH] drm: rcar-du: lvds: fix LVDCR1 for R-Car gen3
  • From: Sergei Shtylyov
• Re: [PATCH 1/3] PM / core: Assign the wakeup_path status flag in __device_prepare()
  • From: Ulf Hansson
• Re: [PATCH v2 1/3] phy: core: Move runtime PM reference counting to the parent device
  • From: Ulf Hansson
• Re: [PATCH] drm: rcar-du: lvds: fix LVDCR1 for R-Car gen3
  • From: Laurent Pinchart
• Re: [PATCH 1/3] PM / core: Assign the wakeup_path status flag in __device_prepare()
  • From: Rafael J. Wysocki
• Re: [PATCH 1/3] PM / core: Assign the wakeup_path status flag in __device_prepare()
  • From: Rafael J. Wysocki
• Re: [PATCH v2 1/3] phy: core: Move runtime PM reference counting to the parent device
  • From: Rafael J. Wysocki
• Re: [PATCH v2 1/3] phy: core: Move runtime PM reference counting to the parent device
  • From: Rafael J. Wysocki
• Re: [PATCH v2 1/3] phy: core: Move runtime PM reference counting to the parent device
  • From: Ulf Hansson
• Re: [PATCH 1/3] PM / core: Assign the wakeup_path status flag in __device_prepare()
  • From: Ulf Hansson
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: Laurent Pinchart
• Re: [PATCH v2 2/3] phy: core: Drop unused runtime PM APIs
  • From: kbuild test robot
• Re: [PATCH] gpio: of: make example syntactically correct
  • From: Sergei Shtylyov
• Re: [PATCH v2 2/3] phy: core: Drop unused runtime PM APIs
  • From: kbuild test robot
• Re: [PATCH v2 1/3] phy: core: Move runtime PM reference counting to the parent device
  • From: Rafael J. Wysocki
• Re: [PATCH v2 1/3] phy: core: Move runtime PM reference counting to the parent device
  • From: Rafael J. Wysocki
• [RFC v2] arm64: dts: r8a7795: salvator-xs: enable SATA
  • From: Wolfram Sang
• [PATCH v3] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Wolfram Sang
• [PATCH] gpio: pca953x: add required properties to example in bindings
  • From: Wolfram Sang
• [PATCH] gpio: of: make example syntactically correct
  • From: Wolfram Sang
• Re: [PATCH 1/3] PM / core: Assign the wakeup_path status flag in __device_prepare()
  • From: Rafael J. Wysocki
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: jacopo mondi
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: Laurent Pinchart
• Re: [PATCH v1 05/10] arch: sh: migor: Use new renesas-ceu camera driver
  • From: Laurent Pinchart
• [PATCH 17/37] ARM: dts: r8a7792: sort root sub-nodes alphabetically
  • From: Simon Horman
• [PATCH 33/37] ARM: dts: iwg22d-sodimm: Sound DMA support on DTS
  • From: Simon Horman
• [PATCH 1/1] soc: renesas: rcar-sysc: Keep wakeup sources active during system suspend
  • From: Simon Horman
• [GIT PULL] Second Round of Renesas ARM Based SoC Updates for v4.16
  • From: Simon Horman
• [PATCH 31/37] ARM: dts: iwg22d-sodimm: Enable SGTL5000 audio codec
  • From: Simon Horman
• [PATCH 37/37] ARM: dts: r8a7745: Add missing clock for secondary CA7 CPU core
  • From: Simon Horman
• [PATCH 36/37] ARM: dts: iwg22d-sodimm: Sound DMA support via DVC on DTS
  • From: Simon Horman
• [PATCH 2/2] arm64: dts: renesas: ulcb: Remove renesas, no-ether-link property
  • From: Simon Horman
• [PATCH 1/2] arm64: dts: renesas: salvator-x: Remove renesas, no-ether-link property
  • From: Simon Horman
• [GIT PULL] Renesas ARM Based SoC Fixes for v4.15
  • From: Simon Horman
• [PATCH 35/37] ARM: dts: iwg22d-sodimm: Sound DMA support via SRC on DTS
  • From: Simon Horman
• [PATCH 29/37] ARM: dts: r8a7745: Add audio DMAC support
  • From: Simon Horman
• [PATCH 27/37] ARM: dts: r8a7740: Correct TPU register block size
  • From: Simon Horman
• [PATCH 23/37] ARM: dts: iwg20d-q7-common: Sound DMA support via SRC on DTS
  • From: Simon Horman
• [PATCH 24/37] ARM: dts: iwg20d-q7-common: Sound DMA support via DVC on DTS
  • From: Simon Horman
• [PATCH 21/37] ARM: dts: iwg20d-q7-common: Sound DMA support on DTS
  • From: Simon Horman
• [PATCH 25/37] ARM: dts: r8a7743: sort root sub-nodes alphabetically
  • From: Simon Horman
• [PATCH 19/37] ARM: dts: iwg20d-q7-common: Enable SGTL5000 audio codec
  • From: Simon Horman
• [PATCH 34/37] ARM: dts: iwg22d-sodimm: Sound DMA support via BUSIF on DTS
  • From: Simon Horman
• [PATCH 30/37] ARM: dts: r8a7745: Add sound support
  • From: Simon Horman
• [PATCH 32/37] ARM: dts: iwg22d-sodimm: Sound PIO support
  • From: Simon Horman
• [PATCH 28/37] ARM: dts: r8a7745: Add audio clocks
  • From: Simon Horman
• [PATCH 26/37] ARM: dts: r8a7743: move timer and thermal-zones nodes out of bus
  • From: Simon Horman
• [PATCH 22/37] ARM: dts: iwg20d-q7-common: Sound DMA support via BUSIF on DTS
  • From: Simon Horman
• [PATCH 18/37] ARM: dts: r8a7792: move timer node out of bus
  • From: Simon Horman
• [PATCH 20/37] ARM: dts: iwg20d-q7-common: Sound PIO support
  • From: Simon Horman
• [PATCH 16/37] ARM: dts: r8a7745: move timer node out of bus
  • From: Simon Horman
• [PATCH 14/37] ARM: dts: r8a7745: Add CMT SoC specific support
  • From: Simon Horman
• [PATCH 15/37] ARM: dts: r8a7745: sort root sub-nodes alphabetically
  • From: Simon Horman
• [PATCH 02/37] ARM: dts: r8a7743: Add audio clocks
  • From: Simon Horman
• [PATCH 12/37] ARM: dts: r8a7745: Add TPU support
  • From: Simon Horman
• [PATCH 09/37] ARM: dts: r8a7743: Add TPU support
  • From: Simon Horman
• [PATCH 03/37] ARM: dts: r8a7743: Add audio DMAC support
  • From: Simon Horman
• [PATCH 13/37] ARM: dts: r8a7743: Add CMT SoC specific support
  • From: Simon Horman
• [PATCH 07/37] ARM: dts: r8a7793: Correct critical CPU temperature
  • From: Simon Horman
• [PATCH 11/37] ARM: dts: r8a7745: Add PWM SoC support
  • From: Simon Horman
• [PATCH 06/37] ARM: dts: r8a7791: Correct critical CPU temperature
  • From: Simon Horman
• [PATCH 08/37] ARM: dts: r8a7743: Add PWM SoC support
  • From: Simon Horman
• [PATCH 10/37] ARM: dts: r8a7743: Add thermal device to DT
  • From: Simon Horman
• [PATCH 04/37] ARM: dts: r8a7743: Add sound support
  • From: Simon Horman
• [PATCH 05/37] ARM: dts: r8a7790: Correct critical CPU temperature
  • From: Simon Horman
• [PATCH 01/37] ARM: dts: r8a7745: Add APMU node and second CPU core
  • From: Simon Horman
• [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.16
  • From: Simon Horman
• [PATCH 3/3] ARM: shmobile: defconfig: Enable PWM
  • From: Simon Horman
• [GIT PULL] Renesas ARM Based SoC Defconfig Updates for v4.16
  • From: Simon Horman
• [PATCH 1/3] ARM: shmobile: defconfig: Enable SGTL5000 audio codec
  • From: Simon Horman
• [PATCH 2/3] ARM: multi_v7_defconfig: Select PWM_RCAR as module
  • From: Simon Horman
• [PATCH 11/11] arm64: dts: renesas: salvator-common: enable usb3_peri0
  • From: Simon Horman
• [PATCH 10/11] arm64: dts: renesas: salvator-common: enable usb3_phy0 node
  • From: Simon Horman
• [PATCH 09/11] arm64: dts: renesas: r8a7796: add usb3_phy node
  • From: Simon Horman
• [PATCH 08/11] arm64: dts: renesas: r8a7795: add usb3_phy node
  • From: Simon Horman
• [PATCH 07/11] arm64: dts: renesas: r8a7796: add reg properties to pciec[01] nodes
  • From: Simon Horman
• [PATCH 06/11] arm64: dts: renesas: r8a7796: move nodes which have no reg property out of bus
  • From: Simon Horman
• [PATCH 05/11] arm64: dts: renesas: r8a7796: sort subnodes of root node alphabetically
  • From: Simon Horman
• [PATCH 04/11] arm64: dts: renesas: r8a7795: sort subnodes of root node alphabetically
  • From: Simon Horman
• [PATCH 01/11] arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus
  • From: Simon Horman
• [PATCH 02/11] arm64: dts: renesas: salvator-common: Add EthernetAVB PHY reset
  • From: Simon Horman
• [PATCH 03/11] arm64: dts: renesas: ulcb: Add EthernetAVB PHY reset
  • From: Simon Horman
• [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.16
  • From: Simon Horman
• Re: [PATCH v2 1/2] arm64: dts: renesas: salvator-x: Remove renesas,no-ether-link property
  • From: Vladimir Zapolskiy
• Re: [PATCH v2 2/2] arm64: dts: renesas: ulcb: Remove renesas,no-ether-link property
  • From: Simon Horman
• Re: [PATCH v2 1/2] arm64: dts: renesas: salvator-x: Remove renesas,no-ether-link property
  • From: Simon Horman
• Re: [PATCH v2 2/2] arm64: dts: renesas: ulcb: Remove renesas,no-ether-link property
  • From: Simon Horman
• Re: [PATCH v2 1/2] arm64: dts: renesas: salvator-x: Remove renesas,no-ether-link property
  • From: Simon Horman
• Re: [PATCH 0/2] arm64: dts: renesas: Remove renesas,no-ether-link property
  • From: Simon Horman
• Re: [PATCH] ARM: dts: r8a7745: Add missing clock for secondary CA7 CPU core
  • From: Simon Horman
• Re: [PATCH v1 05/10] arch: sh: migor: Use new renesas-ceu camera driver
  • From: Geert Uytterhoeven
• Re: [git pull] clk: renesas: Updates for v4.16
  • From: Stephen Boyd
• Re: [PATCH v1 05/10] arch: sh: migor: Use new renesas-ceu camera driver
  • From: jacopo mondi
• [PATCH] drm: rcar-du: lvds: fix LVDCR1 for R-Car gen3
  • From: Sergei Shtylyov
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: jacopo mondi
• Re: [PATCH] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Geert Uytterhoeven
• Re: [PATCH] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Sergei Shtylyov
• Re: [GIT PULL] Renesas ARM Based SoC Updates for v4.16
  • From: Arnd Bergmann
• Re: [GIT PULL] Renesas ARM64 Based SoC DT Updates for v4.16
  • From: Arnd Bergmann
• Re: [GIT PULL] Renesas ARM Based SoC DT Updates for v4.16
  • From: Arnd Bergmann
• [PATCH v2 2/2] arm64: dts: renesas: ulcb: Remove renesas,no-ether-link property
  • From: Vladimir Zapolskiy
• [PATCH v2 1/2] arm64: dts: renesas: salvator-x: Remove renesas,no-ether-link property
  • From: Vladimir Zapolskiy
• [PATCH v2 0/2] arm64: dts: renesas: Remove renesas,no-ether-link property
  • From: Vladimir Zapolskiy
• Re: [GIT PULL] Renesas ARM Based SoC DT Bindings Updates for v4.16
  • From: Arnd Bergmann
• Re: [PATCH] ARM: dts: r8a7745: Add missing clock for secondary CA7 CPU core
  • From: Geert Uytterhoeven
• RE: [PATCH] ARM: dts: r8a7745: Add missing clock for secondary CA7 CPU core
  • From: Chris Paterson
• Re: [PATCH 0/2] arm64: dts: renesas: Remove renesas,no-ether-link property
  • From: Vladimir Zapolskiy
• [PATCH] ARM: dts: r8a7745: Add missing clock for secondary CA7 CPU core
  • From: Biju Das
• Re: [PATCH v2 2/3] phy: core: Drop unused runtime PM APIs
  • From: Ulf Hansson
• Re: [PATCH] mmc: tmio: use io* accessors consistently
  • From: Ulf Hansson
• Re: [PULL REQUEST] renesas/topic/rcar-i2c-recovery for renesas drivers
  • From: Geert Uytterhoeven
• Re: [PULL REQUEST] renesas/topc/ip-switch-rework-2017 for renesas drivers
  • From: Geert Uytterhoeven
• Re: [GIT PULL for renesas-drivers] Display color keying support for Gen3
  • From: Geert Uytterhoeven
• Re: [GIT PULL FOR renesas-drivers] Display CRC calculation support
  • From: Geert Uytterhoeven
• Re: [PATCH v2] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Wolfram Sang
• Re: [PATCH v2] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Sergei Shtylyov
• Re: [PATCH] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Geert Uytterhoeven
• Re: [PATCH] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Wolfram Sang
• Re: [PATCH] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Geert Uytterhoeven
• Re: [PATCH v2] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Wolfram Sang
• RE: [PATCH v2 2/3] phy: core: Drop unused runtime PM APIs
  • From: Yoshihiro Shimoda
• [PATCH v2] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Wolfram Sang
• Re: [PATCH] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Wolfram Sang
• [RFC] arm64: renesas_defconfig: add driver for PCA9654
  • From: Wolfram Sang
• [PATCH] of: usb: Fix definition of of_usb_get_dr_mode_by_phy
  • From: Suzuki K Poulose
• Re: [PATCH] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Sergei Shtylyov
• [RFC] arm64: dts: r8a7795: salvator-xs: enable SATA
  • From: Wolfram Sang
• [PATCH] arm64: dts: renesas: salvator-common: add GPIO extender
  • From: Wolfram Sang
• Re: [PATCH] pinctrl: sh-pfc: r8a7795: Add SATA pins, groups, and functions
  • From: Wolfram Sang
• Re: [PATCH 0/2] arm64: dts: renesas: Remove renesas,no-ether-link property
  • From: Simon Horman
• Re: [PATCH 0/9] Add sound support
  • From: Simon Horman
• Re: [PATCH 8/9] ARM: dts: iwg22d-sodimm: Sound DMA support via SRC on DTS
  • From: Simon Horman
• RE: [PATCH 8/9] ARM: dts: iwg22d-sodimm: Sound DMA support via SRC on DTS
  • From: Biju Das
• Re: [PATCH v2 2/3] phy: core: Drop unused runtime PM APIs
  • From: Ulf Hansson
• Re: [PATCH v2 1/3] phy: core: Move runtime PM reference counting to the parent device
  • From: Ulf Hansson
• Re: [PATCH 8/9] ARM: dts: iwg22d-sodimm: Sound DMA support via SRC on DTS
  • From: Simon Horman
• RE: [PATCH v2 2/3] phy: core: Drop unused runtime PM APIs
  • From: Yoshihiro Shimoda
• Re: [PATCH 1/3] PM / core: Assign the wakeup_path status flag in __device_prepare()
  • From: Ulf Hansson
• Re: [PATCH 3/9] ARM: dts: r8a7745: Add sound support
  • From: Geert Uytterhoeven
• Re: [PATCH 4/9] ARM: dts: iwg22d-sodimm: Enable SGTL5000 audio codec
  • From: Geert Uytterhoeven
• Re: [PATCH] dt-bindings: gpio: rcar: Correct SoC family name for R8A7778
  • From: Linus Walleij
• Re: [PATCH 2/9] ARM: dts: r8a7745: Add audio DMAC support
  • From: Geert Uytterhoeven
• Re: [PATCH 1/9] ARM: dts: r8a7745: Add audio clocks
  • From: Geert Uytterhoeven
• Re: [PATCH 1/3] ARM: dts: r8a7740: Correct TPU register block size
  • From: Simon Horman
• Re: [PATCH v2 0/2] iommu/ipmmu-vmsa: Add r8a779(6|70|95) DT bindings
  • From: Simon Horman
• Re: [PATCH] pinctrl: sh-pfc: r8a7795: Add SATA pins, groups, and functions
  • From: Geert Uytterhoeven
• Re: [PATCH 1/3] PM / core: Assign the wakeup_path status flag in __device_prepare()
  • From: Rafael J. Wysocki
• Re: [PATCH v2 1/3] phy: core: Move runtime PM reference counting to the parent device
  • From: Rafael J. Wysocki
• Re: [PATCH v9 18/28] rcar-vin: break out format alignment and checking
  • From: Niklas Söderlund
• [PATCH] pinctrl: sh-pfc: r8a7795: Add SATA pins, groups, and functions
  • From: Wolfram Sang
• Re: [PATCH v9 16/28] rcar-vin: add function to manipulate Gen3 chsel value
  • From: Niklas Söderlund
• Re: [PATCH] dt-bindings: gpio: rcar: Correct SoC family name for R8A7778
  • From: Rob Herring
• Re: [PATCH 3/3] dt-bindings: pwm: renesas-tpu: Correct SoC part numbers and family names
  • From: Rob Herring
• Re: [PATCH 2/3] dt-bindings: pwm: renesas-tpu: Correct example TPU register block size
  • From: Rob Herring
• Re: [PATCH v9 15/28] rcar-vin: enable Gen3 hardware configuration
  • From: Niklas Söderlund
• [PATCH 9/9] ARM: dts: iwg22d-sodimm: Sound DMA support via DVC on DTS
  • From: Biju Das
• [PATCH 8/9] ARM: dts: iwg22d-sodimm: Sound DMA support via SRC on DTS
  • From: Biju Das
• [PATCH 7/9] ARM: dts: iwg22d-sodimm: Sound DMA support via BUSIF on DTS
  • From: Biju Das
• [PATCH 6/9] ARM: dts: iwg22d-sodimm: Sound DMA support on DTS
  • From: Biju Das
• [PATCH 5/9] ARM: dts: iwg22d-sodimm: Sound PIO support
  • From: Biju Das
• [PATCH 3/9] ARM: dts: r8a7745: Add sound support
  • From: Biju Das
• [PATCH 4/9] ARM: dts: iwg22d-sodimm: Enable SGTL5000 audio codec
  • From: Biju Das
• [PATCH 1/9] ARM: dts: r8a7745: Add audio clocks
  • From: Biju Das
• [PATCH 2/9] ARM: dts: r8a7745: Add audio DMAC support
  • From: Biju Das
• [PATCH 0/9] Add sound support
  • From: Biju Das
• Re: [PATCH] v4l: rcar-csi2: Don't bail out from probe on no ep
  • From: Niklas Söderlund
• Re: [PATCH v2 0/2] iommu/ipmmu-vmsa: Add r8a779(6|70|95) DT bindings
  • From: Alex Williamson
• Re: [PATCH] v4l: rcar-csi2: Don't bail out from probe on no ep
  • From: Laurent Pinchart
• Re: [PATCH v9 13/28] rcar-vin: fix handling of single field frames (top, bottom and alternate fields)
  • From: Niklas Söderlund
• Re: [PATCH v9 11/28] rcar-vin: do not allow changing scaling and composing while streaming
  • From: Niklas Söderlund
• Re: [PATCH v9 09/28] rcar-vin: all Gen2 boards can scale simplify logic
  • From: Niklas Söderlund
• Re: [PATCH v9 07/28] rcar-vin: change name of video device
  • From: Niklas Söderlund
• [PATCH v2 2/3] phy: core: Drop unused runtime PM APIs
  • From: Ulf Hansson
• [PATCH v2 0/3] phy: core: Re-work runtime PM deployment and fix an issue
  • From: Ulf Hansson
• [PATCH v2 3/3] phy: core: Update the runtime PM section in the docs to reflect changes
  • From: Ulf Hansson
• [PATCH v2 1/3] phy: core: Move runtime PM reference counting to the parent device
  • From: Ulf Hansson
• [PATCH 2/2] arm64: dts: renesas: ulcb: Remove renesas,no-ether-link property
  • From: Vladimir Zapolskiy
• [PATCH 1/2] arm64: dts: renesas: salvator-x: Remove renesas,no-ether-link property
  • From: Vladimir Zapolskiy
• [PATCH 0/2] arm64: dts: renesas: Remove renesas,no-ether-link property
  • From: Vladimir Zapolskiy
• Re: [PATCH v2 3/8] media: v4l2-async: simplify v4l2_async_subdev structure
  • From: Lad, Prabhakar
• [PATCH/RFC] iommu/ipmmu-vmsa: 2-stage translation hack using PMB
  • From: Magnus Damm
• Re: [PATCH 1/3] phy: core: Move runtime PM reference counting to the parent device
  • From: Ulf Hansson
• [PATCH] arm64: dts: renesas: r8a77970: move node which has no reg property out of bus
  • From: Simon Horman
• [PATCH/RFC 03/03] iommu/ipmmu-vmsa: Add SYS-DMAC devices as whitelist
  • From: Magnus Damm
• [PATCH/RFC 02/03] iommu/ipmmu-vmsa: Detect r8a77965 compat strings
  • From: Magnus Damm
• [PATCH/RFC 01/03] arm64: dts: r8a77965: Enable IPMMU MM, DS0 and DS1
  • From: Magnus Damm
• [PATCH] arm64: dts: renesas: r8a77995: move nodes which have no reg property out of bus
  • From: Simon Horman
• [PATCH/RFC 00/03] iommu/ipmmu-vmsa: IPMMU prototyping on r8a77965
  • From: Magnus Damm
• [PATCH 0/3] ARM: dts: renesas: Reduce size of thermal registers
  • From: Simon Horman
• [PATCH 1/3] ARM: dts: r8a7790: Reduce size of thermal registers
  • From: Simon Horman
• [PATCH 3/3] ARM: dts: r8a7793: Reduce size of thermal registers
  • From: Simon Horman
• [PATCH 2/3] ARM: dts: r8a7791: Reduce size of thermal registers
  • From: Simon Horman
• Re: [PATCH v2 2/2] ARM: dts: r8a7743: Add thermal device to DT
  • From: Simon Horman
• Re: [PATCH 1/3] phy: core: Move runtime PM reference counting to the parent device
  • From: Ulf Hansson
• Re: [PATCH 2/2] ARM: dts: r8a7792: move timer node out of bus
  • From: Simon Horman
• RE: [PATCH v2 2/2] ARM: dts: r8a7743: Add thermal device to DT
  • From: Biju Das
• Re: [PATCH v2 2/2] ARM: dts: r8a7743: Add thermal device to DT
  • From: Simon Horman
• Re: [PATCH v4] dt-bindings: pwm: rcar: Document r8a774[35] PWM bindings
  • From: Simon Horman
• Re: [PATCH v2 3/3] soc: renesas: rcar-sysc: Keep wakeup sources active during system suspend
  • From: Simon Horman
• Re: [PATCH 2/4] arm64: dts: renesas: r8a7796: add usb3_phy node
  • From: Simon Horman
• Re: [PATCH 4/4] arm64: dts: renesas: salvator-common: enable usb3_peri0
  • From: Simon Horman
• Re: [PATCH 3/4] arm64: dts: renesas: salvator-common: enable usb3_phy0 node
  • From: Simon Horman
• Re: [PATCH 1/4] arm64: dts: renesas: r8a7795: add usb3_phy node
  • From: Simon Horman
• RE: [PATCH v2 2/2] ARM: dts: r8a7743: Add thermal device to DT
  • From: Biju Das
• [PATCH v4] dt-bindings: pwm: rcar: Document r8a774[35] PWM bindings
  • From: Fabrizio Castro
• RE: [PATCH v3 2/5] dt-bindings: pwm: rcar: Document r8a774[35] PWM bindings
  • From: Fabrizio Castro
• Re: [PATCH v2 3/8] media: v4l2-async: simplify v4l2_async_subdev structure
  • From: Niklas Söderlund
• Re: [PATCH v2 3/3] soc: renesas: rcar-sysc: Keep wakeup sources active during system suspend
  • From: Geert Uytterhoeven
• Re: [PATCH v2 0/2] iommu/ipmmu-vmsa: Add r8a779(6|70|95) DT bindings
  • From: Simon Horman
• Re: [PATCH v2 3/3] soc: renesas: rcar-sysc: Keep wakeup sources active during system suspend
  • From: Simon Horman
• Re: [PATCH v3 2/5] dt-bindings: pwm: rcar: Document r8a774[35] PWM bindings
  • From: Simon Horman
• Re: [PATCH 5/5] ARM: dts: iwg20d-q7-common: Enable SGTL5000 audio codec
  • From: Simon Horman
• Re: [PATCH v2 2/2] ARM: dts: r8a7743: move timer node out of bus
  • From: Simon Horman
• Re: [PATCH v2 1/2] ARM: dts: r8a7743: sort root sub-nodes alphabetically
  • From: Simon Horman
• RE: [PATCH 5/5] ARM: dts: iwg20d-q7-common: Enable SGTL5000 audio codec
  • From: Biju Das
• Re: [PATCH v2 1/2] ARM: dts: r8a7743: sort root sub-nodes alphabetically
  • From: Simon Horman
• Re: [PATCH 5/5] ARM: dts: iwg20d-q7-common: Enable SGTL5000 audio codec
  • From: Simon Horman
• Re: [PATCH v2 0/5] Add sound support
  • From: Simon Horman
• RE: [PATCH v3 2/5] dt-bindings: pwm: rcar: Document r8a774[35] PWM bindings
  • From: Fabrizio Castro
• Re: [PATCH v2 1/5] ARM: dts: iwg20d-q7-common: Sound PIO support
  • From: Simon Horman
• Re: [PATCH v2 1/5] ARM: dts: iwg20d-q7-common: Sound PIO support
  • From: Simon Horman
• Re: [git pull] pinctrl: sh-pfc: Updates for v4.16
  • From: Linus Walleij
• Re: [PATCH v2 2/2] can: rcar_canfd: document r8a77995 (R-Car D3) compatibility strings
  • From: Simon Horman
• Re: [PATCH v2 1/2] can: rcar_can: document r8a77995 (R-Car D3) compatibility strings
  • From: Simon Horman
• Re: [PATCH 1/2] ARM: dts: r8a7792: sort root sub-nodes alphabetically
  • From: Simon Horman
• Re: [PATCH 2/2] ARM: dts: r8a7745: move timer node out of bus
  • From: Simon Horman
• Re: [PATCH 1/2] ARM: dts: r8a7745: sort root sub-nodes alphabetically
  • From: Simon Horman
• [ANNOUNCE] Renesas tree closing schedule for v4.16
  • From: Simon Horman
• Re: [PATCH v2 3/3] ARM: dts: r8a7745: Add CMT SoC specific support
  • From: Simon Horman
• Re: [PATCH v2 2/3] ARM: dts: r8a7743: Add CMT SoC specific support
  • From: Simon Horman
• Re: [PATCH v2 4/4] ARM: dts: r8a7745: Add TPU support
  • From: Simon Horman
• Re: [PATCH v2 2/4] ARM: dts: r8a7745: Add PWM SoC support
  • From: Simon Horman
• Re: [PATCH 1/3] phy: core: Move runtime PM reference counting to the parent device
  • From: Kishon Vijay Abraham I
• Re: [PATCH v2 2/2] ARM: dts: r8a7743: Add thermal device to DT
  • From: Simon Horman
• Re: [PATCH v3 5/5] ARM: dts: r8a7743: Add TPU support
  • From: Simon Horman
• Re: [PATCH v3 4/5] dt-bindings: pwm: renesas-tpu: Document r8a774[35] support
  • From: Simon Horman
• Re: [PATCH v3 3/5] ARM: dts: r8a7743: Add PWM SoC support
  • From: Simon Horman
• Re: [PATCH 1/3] phy: core: Move runtime PM reference counting to the parent device
  • From: Ulf Hansson
• Re: [PATCH v3 2/5] dt-bindings: pwm: rcar: Document r8a774[35] PWM bindings
  • From: Simon Horman
• Re: [PATCH v3 1/5] ARM: shmobile: defconfig: Enable PWM
  • From: Simon Horman
• Re: [PATCH v2 1/2] dt-bindings: thermal: rcar: Add device tree support for r8a7743
  • From: Simon Horman
• Re: [PATCH] soc: renesas: rcar-sysc: Mark rcar_sysc_matches[] __initconst
  • From: Simon Horman
• Re: [PATCH] ARM: multi_v7_defconfig: Select PWM_RCAR as module
  • From: Simon Horman
• Re: [PATCH 1/3] ARM: dts: r8a7740: Correct TPU register block size
  • From: Simon Horman
• Re: [PATCH 2/3] dt-bindings: pwm: renesas-tpu: Correct example TPU register block size
  • From: Simon Horman
• Re: [PATCH 3/3] dt-bindings: pwm: renesas-tpu: Correct SoC part numbers and family names
  • From: Simon Horman
• Re: [PATCH] dt-bindings: pinctrl: sh-pfc: Correct SoC family name for R8A7778
  • From: Simon Horman
• Re: [PATCH] dt-bindings: gpio: rcar: Correct SoC family name for R8A7778
  • From: Simon Horman
• Re: [PATCH 1/3] phy: core: Move runtime PM reference counting to the parent device
  • From: Kishon Vijay Abraham I
• [PATCH/RFC] arm64: r8a77965 Salvator-X IPMMU environment prototype
  • From: Magnus Damm
• [PATCH 0/3] phy: core: Re-work runtime PM deployment and fix an issue
  • From: Ulf Hansson
• [PATCH 3/3] phy: core: Update the runtime PM section in the docs to reflect changes
  • From: Ulf Hansson
• [PATCH 2/3] phy: core: Drop unused runtime PM APIs
  • From: Ulf Hansson
• [PATCH 1/3] phy: core: Move runtime PM reference counting to the parent device
  • From: Ulf Hansson
• RE: [PATCH v2 3/8] media: v4l2-async: simplify v4l2_async_subdev structure
  • From: Hyun Kwon
• [PATCH] dt-bindings: pinctrl: sh-pfc: Correct SoC family name for R8A7778
  • From: Geert Uytterhoeven
• [PATCH] dt-bindings: gpio: rcar: Correct SoC family name for R8A7778
  • From: Geert Uytterhoeven
• [PATCH 0/3] pwm: renesas-tpu: Misc Fixes
  • From: Geert Uytterhoeven
• [PATCH 1/3] ARM: dts: r8a7740: Correct TPU register block size
  • From: Geert Uytterhoeven
• [PATCH 3/3] dt-bindings: pwm: renesas-tpu: Correct SoC part numbers and family names
  • From: Geert Uytterhoeven
• [PATCH 2/3] dt-bindings: pwm: renesas-tpu: Correct example TPU register block size
  • From: Geert Uytterhoeven
• [PATCH] soc: renesas: rcar-sysc: Mark rcar_sysc_matches[] __initconst
  • From: Geert Uytterhoeven
• [PATCH] ARM: multi_v7_defconfig: Select PWM_RCAR as module
  • From: Fabrizio Castro
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: Laurent Pinchart
• [PATCH v3 5/5] ARM: dts: r8a7743: Add TPU support
  • From: Fabrizio Castro
• [PATCH v3 4/5] dt-bindings: pwm: renesas-tpu: Document r8a774[35] support
  • From: Fabrizio Castro
• [PATCH v3 3/5] ARM: dts: r8a7743: Add PWM SoC support
  • From: Fabrizio Castro
• [PATCH v3 1/5] ARM: shmobile: defconfig: Enable PWM
  • From: Fabrizio Castro
• [PATCH v3 2/5] dt-bindings: pwm: rcar: Document r8a774[35] PWM bindings
  • From: Fabrizio Castro
• [PATCH v3 0/5] Add PWM and TPU support to r8a7743
  • From: Fabrizio Castro
• [PATCH] mmc: tmio: use io* accessors consistently
  • From: Wolfram Sang
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: Sakari Ailus
• Re: [RFC PATCH] mmc: tmio: use ioread* for repeated access to a register
  • From: Wolfram Sang
• [PATCH v2 2/2] ARM: dts: r8a7743: Add thermal device to DT
  • From: Biju Das
• [PATCH v2 1/2] dt-bindings: thermal: rcar: Add device tree support for r8a7743
  • From: Biju Das
• [PATCH v2 0/2] Add thermal support for iWave RZ/G1M board
  • From: Biju Das
• Re: [PATCH/RFC 1/4] drm: Add colorkey properties
  • From: Laurent Pinchart
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: Laurent Pinchart
• RE: [PATCH 2/2] ARM: dts: r8a7743: Add thermal device to DT
  • From: Biju Das
• RE: [PATCH v2 3/6] ARM: dts: r8a7743: Add PWM SoC support
  • From: Fabrizio Castro
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: jacopo mondi
• Re: [PATCH v2 3/6] ARM: dts: r8a7743: Add PWM SoC support
  • From: Geert Uytterhoeven
• Re: [PATCH v2 5/8] media: v4l2-mediabus: convert flags to enums and document them
  • From: Philipp Zabel
• Re: [PATCH 2/2] ARM: dts: r8a7743: Add thermal device to DT
  • From: Geert Uytterhoeven
• RE: [PATCH v2 6/6] phy: renesas: rcar-gen3-usb2: add gpio handling
  • From: Yoshihiro Shimoda
• Re: [PATCH 2/2] PCI: rcar: Handle rcar_pcie_parse_request_of_pci_ranges() failures
  • From: Lorenzo Pieralisi
• RE: [PATCH v2 2/4] ARM: dts: r8a7745: Add PWM SoC support
  • From: Fabrizio Castro
• RE: [PATCH v2 3/6] ARM: dts: r8a7743: Add PWM SoC support
  • From: Fabrizio Castro
• Re: [PATCH v2 4/4] ARM: dts: r8a7745: Add TPU support
  • From: Geert Uytterhoeven
• Re: [PATCH v2 6/6] ARM: dts: r8a7743: Add TPU support
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/4] ARM: dts: r8a7745: Add PWM SoC support
  • From: Geert Uytterhoeven
• Re: [PATCH v2 3/6] ARM: dts: r8a7743: Add PWM SoC support
  • From: Geert Uytterhoeven
• Re: [PATCH v2 3/3] ARM: dts: r8a7745: Add CMT SoC specific support
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/3] ARM: dts: r8a7743: Add CMT SoC specific support
  • From: Geert Uytterhoeven
• [PATCH v2 3/8] media: v4l2-async: simplify v4l2_async_subdev structure
  • From: Mauro Carvalho Chehab
• [PATCH v2 5/8] media: v4l2-mediabus: convert flags to enums and document them
  • From: Mauro Carvalho Chehab
• Re: [PATCH 5/8] media: v4l2-mediabus: convert flags to enums and document them
  • From: Mauro Carvalho Chehab
• Re: [PATCH 1/8] dt-bindings: can: rcar_can: document r8a774[35] can support
  • From: Marc Kleine-Budde
• RE: [PATCH v2 2/4] dt-bindings: media: rcar_vin: add device tree support for r8a774[35]
  • From: Fabrizio Castro
• RE: [PATCH 1/8] dt-bindings: can: rcar_can: document r8a774[35] can support
  • From: Fabrizio Castro
• Re: [PATCH] pinctrl: sh-pfc: r8a7794: Add i2c5 pin groups and function
  • From: Geert Uytterhoeven
• Re: [PATCH 5/8] media: v4l2-mediabus: convert flags to enums and document them
  • From: Philipp Zabel
• Re: [PATCH 1/2] ARM: dts: r8a7792: sort root sub-nodes alphabetically
  • From: Sergei Shtylyov
• Re: [PATCH v2 5/6] pinctrl: sh-pfc: r8a7791: Add tpu groups and function
  • From: Geert Uytterhoeven
• Re: [PATCH 3/8] media: v4l2-async: simplify v4l2_async_subdev structure
  • From: Philipp Zabel
• Re: [PATCH v2 3/4] pinctrl: sh-pfc: r8a7794: Add tpu groups and function
  • From: Geert Uytterhoeven
• [PATCH v3] dmaengine: rcar-dmac: Document R-Car D3 bindings
  • From: Ulrich Hecht
• Re: [PATCH/RFC 1/4] drm: Add colorkey properties
  • From: Neil Armstrong
• Re: [PATCH 2/2] ARM: dts: r8a7745: move timer node out of bus
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] ARM: dts: r8a7745: sort root sub-nodes alphabetically
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/2] ARM: dts: r8a7743: move timer node out of bus
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/2] ARM: dts: r8a7743: sort root sub-nodes alphabetically
  • From: Geert Uytterhoeven
• Re: [PATCH 2/2] ARM: dts: r8a7792: move timer node out of bus
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] ARM: dts: r8a7792: sort root sub-nodes alphabetically
  • From: Geert Uytterhoeven
• Re: [PATCH 3/8] media: v4l2-async: simplify v4l2_async_subdev structure
  • From: Sakari Ailus
• Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
  • From: Simon Horman
• Re: [PATCH v2 00/22] mmc: tmio: various fixes and cleanups
  • From: Ulf Hansson
• Re: [PATCH v2 00/22] mmc: tmio: various fixes and cleanups
  • From: Masahiro Yamada
• RE: [PATCH 4/4] arm64: dts: r8a7796: Add DEVFREQ support for GSX
  • From: Gaku Inami
• Re: [PATCH v2 6/6] phy: renesas: rcar-gen3-usb2: add gpio handling
  • From: Rob Herring
• Re: [PATCH/RFC v2 07/15] rcar-csi2: use frame description information to configure CSI-2 bus
  • From: Niklas Söderlund
• Re: [PATCH/RFC v2 06/15] rcar-csi2: use frame description information when propagating .s_stream()
  • From: Niklas Söderlund
• Re: [PATCH/RFC v2 05/15] rcar-csi2: count usage for each source pad
  • From: Niklas Söderlund
• Re: [PATCH/RFC v2 03/15] rcar-vin: use the pad and stream aware s_stream
  • From: Niklas Söderlund
• Re: [PATCH/RFC v2 02/15] rcar-vin: use pad as the starting point for a pipeline
  • From: Niklas Söderlund
• Re: [PATCH/RFC v2 01/15] v4l2-subdev.h: add pad and stream aware s_stream
  • From: Niklas Söderlund
• Re: [PATCH/RFC v2 14/15] adv748x: csi2: add get_routing support
  • From: Niklas Söderlund
• Re: [PATCH/RFC v2 09/15] adv748x: csi2: add module param for virtual channel
  • From: Niklas Söderlund
• Re: [PATCH 3/8] media: v4l2-async: simplify v4l2_async_subdev structure
  • From: Alexandre Belloni
• Re: [PATCH/RFC v2 13/15] adv748x: csi2: only allow formats on sink pads
  • From: Niklas Söderlund
• [RFC PATCH 5/7] i2c: sh_mobile: add helper to check frequency calculations
  • From: Wolfram Sang
• [RFC PATCH 6/7] i2c: sh_mobile: add new frequency calculation for later SoC
  • From: Wolfram Sang
• [RFC PATCH 7/7] i2c: sh_mobile: let r8a7790 (R-Car H2) use the new formula
  • From: Wolfram Sang
• [RFC PATCH 4/7] i2c: sh_mobile: let RuntimePM do the clock handling
  • From: Wolfram Sang
• [RFC PATCH 3/7] i2c: sh_mobile: require setup callback
  • From: Wolfram Sang
• [RFC PATCH 2/7] i2c: sh_mobile: allow setup callback to return errno
  • From: Wolfram Sang
• [RFC PATCH 0/7] i2c: sh_mobile: support per-SoC frequency calculation
  • From: Wolfram Sang
• [RFC PATCH 1/7] i2c: sh_mobile: move type detection upwards
  • From: Wolfram Sang
• [PATCH 2/2] ARM: dts: r8a7745: move timer node out of bus
  • From: Simon Horman
• [PATCH 1/2] ARM: dts: r8a7745: sort root sub-nodes alphabetically
  • From: Simon Horman
• [PATCH 0/2] ARM: dts: r8a7745: move timer node nodes out of bus
  • From: Simon Horman
• [PATCH v2 0/2] ARM: dts: r8a7743: move timer nodes nodes out of bus
  • From: Simon Horman
• [PATCH v2 1/2] ARM: dts: r8a7743: sort root sub-nodes alphabetically
  • From: Simon Horman
• [PATCH v2 2/2] ARM: dts: r8a7743: move timer node out of bus
  • From: Simon Horman
• [PATCH 0/2] ARM: dts: r8a7792: Timer node nodes out of bus
  • From: Simon Horman
• [PATCH 1/2] ARM: dts: r8a7792: sort root sub-nodes alphabetically
  • From: Simon Horman
• [PATCH 2/2] ARM: dts: r8a7792: move timer node out of bus
  • From: Simon Horman
• Re: [PATCH 3/8] media: v4l2-async: simplify v4l2_async_subdev structure
  • From: Benoit Parrot
• [PATCH 3/8] media: v4l2-async: simplify v4l2_async_subdev structure
  • From: Mauro Carvalho Chehab
• [PATCH 5/8] media: v4l2-mediabus: convert flags to enums and document them
  • From: Mauro Carvalho Chehab
• Re: [PATCH v2 13/17] media: v4l2-async: simplify v4l2_async_subdev structure
  • From: Mauro Carvalho Chehab
• Re: [PATCH 04/24] media: v4l2-mediabus: convert flags to enums and document them
  • From: Mauro Carvalho Chehab
• [PATCH v2 5/5] ARM: dts: iwg20d-q7-common: Sound DMA support via DVC on DTS
  • From: Biju Das
• [PATCH v2 4/5] ARM: dts: iwg20d-q7-common: Sound DMA support via SRC on DTS
  • From: Biju Das
• [PATCH v2 3/5] ARM: dts: iwg20d-q7-common: Sound DMA support via BUSIF on DTS
  • From: Biju Das
• [PATCH v2 2/5] ARM: dts: iwg20d-q7-common: Sound DMA support on DTS
  • From: Biju Das
• [PATCH v2 1/5] ARM: dts: iwg20d-q7-common: Sound PIO support
  • From: Biju Das
• [PATCH v2 0/5] Add sound support
  • From: Biju Das
• [PATCH v2 0/2] R-Car D3 (r8a77995) CAN support
  • From: Ulrich Hecht
• [PATCH v2 1/2] can: rcar_can: document r8a77995 (R-Car D3) compatibility strings
  • From: Ulrich Hecht
• RE: [PATCH] pinctrl: sh-pfc: r8a7794: Add i2c5 pin groups and function
  • From: Fabrizio Castro
• [PATCH v2 2/4] ARM: dts: r8a7745: Add PWM SoC support
  • From: Fabrizio Castro
• [PATCH v2 4/4] ARM: dts: r8a7745: Add TPU support
  • From: Fabrizio Castro
• [PATCH v2 0/4] Add PWM and TPU support to r8a7745
  • From: Fabrizio Castro
• [PATCH v2 3/4] pinctrl: sh-pfc: r8a7794: Add tpu groups and function
  • From: Fabrizio Castro
• [PATCH v2 1/4] pinctrl: sh-pfc: r8a7794: Add PWM[0123456] support
  • From: Fabrizio Castro
• [PATCH] pinctrl: sh-pfc: r8a7794: Add i2c5 pin groups and function
  • From: Biju Das
• [PATCH v2 5/6] pinctrl: sh-pfc: r8a7791: Add tpu groups and function
  • From: Fabrizio Castro
• [PATCH v2 4/6] dt-bindings: pwm: renesas-tpu: Document r8a774[35] support
  • From: Fabrizio Castro
• [PATCH v2 6/6] ARM: dts: r8a7743: Add TPU support
  • From: Fabrizio Castro
• [PATCH v2 0/6] Add PWM and TPU support to r8a7743
  • From: Fabrizio Castro
• [PATCH v2 3/6] ARM: dts: r8a7743: Add PWM SoC support
  • From: Fabrizio Castro
• [PATCH v2 2/6] dt-bindings: pwm: rcar: Document r8a774[35] PWM bindings
  • From: Fabrizio Castro
• [PATCH v2 1/6] ARM: shmobile: defconfig: Enable PWM
  • From: Fabrizio Castro
• [PATCH v2 3/3] ARM: dts: r8a7745: Add CMT SoC specific support
  • From: Fabrizio Castro
• [PATCH v2 2/3] ARM: dts: r8a7743: Add CMT SoC specific support
  • From: Fabrizio Castro
• [PATCH v2 1/3] dt-bindings: timer: renesas, cmt: Document r8a774[35] CMT support
  • From: Fabrizio Castro
• [PATCH v2 0/3] Add CMT support to r8a774[35]
  • From: Fabrizio Castro
• Re: [PATCH 00/24] V4L2 kAPI cleanups and documentation improvements part 2
  • From: Mauro Carvalho Chehab
• RE: [PATCH 3/4] pinctrl: sh-pfc: r8a7794: Add tpu groups and function
  • From: Fabrizio Castro
• RE: [PATCH 5/6] pinctrl: sh-pfc: r8a7791: Add tpu groups and function
  • From: Fabrizio Castro
• Re: [RFC PATCH] mmc: tmio: use ioread* for repeated access to a register
  • From: Masahiro Yamada
• [PATCH v2 2/2] can: rcar_canfd: document r8a77995 (R-Car D3) compatibility strings
  • From: Ulrich Hecht
• Re: [PATCH 3/4] kms++util: Add verification module
  • From: Tomi Valkeinen
• RE: [PATCH 2/3] ARM: dts: r8a7743: Add CMT SoC specific support
  • From: Fabrizio Castro
• Re: [PATCH 3/4] kms++util: Add verification module
  • From: Laurent Pinchart
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: Laurent Pinchart
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: jacopo mondi
• Re: [RFC PATCH] mmc: tmio: use ioread* for repeated access to a register
  • From: Ulf Hansson
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: jacopo mondi
• Re: [PATCH 3/4] kms++util: Add verification module
  • From: Geert Uytterhoeven
• Re: [PATCH 3/4] kms++util: Add verification module
  • From: Tomi Valkeinen
• Re: [PATCH 3/4] kms++util: Add verification module
  • From: Laurent Pinchart
• Re: [PATCH 3/4] kms++util: Add verification module
  • From: Tomi Valkeinen
• Re: [PATCH 4/4] kms++util: Add frame compare functionality
  • From: Laurent Pinchart
• Re: [PATCH 3/4] kms++util: Add verification module
  • From: Tomi Valkeinen
• Re: [PATCH 3/4] kms++util: Add verification module
  • From: Laurent Pinchart
• Re: [PATCH 2/4] py: pyvid: Provide stream_off binding
  • From: Laurent Pinchart
• RE: [PATCH 1/5] ARM: dts: iwg20d-q7-common: Sound PIO support
  • From: Biju Das
• Re: [PATCH 1/4] videodevice: Fix minor spacing
  • From: Laurent Pinchart
• Re: [PATCH 1/5] ARM: dts: iwg20d-q7-common: Sound PIO support
  • From: Simon Horman
• Re: [PATCH v2 3/3] soc: renesas: rcar-sysc: Keep wakeup sources active during system suspend
  • From: Geert Uytterhoeven
• Re: [PATCH 2/3] ARM: dts: r8a7743: Add CMT SoC specific support
  • From: Simon Horman
• Re: [PATCH 5/6] pinctrl: sh-pfc: r8a7791: Add tpu groups and function
  • From: Geert Uytterhoeven
• Re: [PATCH 0/5] Add Sound support for iWave RZ/G1M board
  • From: Simon Horman
• Re: [PATCH 3/4] pinctrl: sh-pfc: r8a7794: Add tpu groups and function
  • From: Geert Uytterhoeven
• Re: [PATCH 3/4] pinctrl: sh-pfc: r8a7794: Add tpu groups and function
  • From: Geert Uytterhoeven
• Re: [PATCH 1/4] pinctrl: sh-pfc: r8a7794: Add PWM[0123456] support
  • From: Geert Uytterhoeven
• Re: [PATCH 2/3] arm64: dts: renesas: r8a7796: move nodes which have no reg property out of bus
  • From: Simon Horman
• Re: [PATCH 4/6] dt-bindings: pwm: renesas-tpu: Document r8a774[35] support
  • From: Geert Uytterhoeven
• Re: [PATCH 2/6] dt-bindings: pwm: rcar: Document r8a774[35] PWM bindings
  • From: Geert Uytterhoeven
• Re: [PATCH 4/4] arm64: dts: r8a7796: Add DEVFREQ support for GSX
  • From: Geert Uytterhoeven
• Re: [PATCH 3/4] arm64: dts: r8a7796: Add GSX device node
  • From: Geert Uytterhoeven
• Re: [PATCH 2/4] clk: renesas: rcar-gen3: Add ZG clock divider support
  • From: Geert Uytterhoeven
• Re: [PATCH 1/4] clk: renesas: r8a7796: Add ZG clock
  • From: Geert Uytterhoeven
• [PATCH] tty: serial: sh-sci: Add default for number of ports for compile-testing
  • From: Geert Uytterhoeven
• Re: [PATCH v4 2/2] drm: rcar-du: calculate DPLLCR to be more small jitter
  • From: Laurent Pinchart
• Re: [PATCH 4/5] v4l2: async: Postpone subdev_notifier registration
  • From: Laurent Pinchart
• Re: [PATCH v4 2/2] drm: rcar-du: calculate DPLLCR to be more small jitter
  • From: Kuninori Morimoto
• Re: [PATCH v4 2/2] drm: rcar-du: calculate DPLLCR to be more small jitter
  • From: Laurent Pinchart
• Re: [PATCH v4 1/2] drm: rcar-du: use 1000 to avoid misunderstanding in rcar_du_dpll_divider()
  • From: Laurent Pinchart
• RE: [PATCH v2 6/6] phy: renesas: rcar-gen3-usb2: add gpio handling
  • From: Yoshihiro Shimoda
• [renesas-drivers:topic/renesas-overlays 23/108] drivers/of/dynamic.c:1076 of_changeset_add_property_stringf() error: potential null dereference 'str'. (kvasprintf returns null)
  • From: kbuild test robot
• Re: [RFC PATCH] mmc: tmio: use ioread* for repeated access to a register
  • From: Ian Molton
• [PATCH v4 2/2] drm: rcar-du: calculate DPLLCR to be more small jitter
  • From: Kuninori Morimoto
• [PATCH v4 1/2] drm: rcar-du: use 1000 to avoid misunderstanding in rcar_du_dpll_divider()
  • From: Kuninori Morimoto
• [PATCH v4 0/2] drm: rcar-du: calculate DPLLCR to be more small jitter
  • From: Kuninori Morimoto
• Re: [PATCH 0/5] Add sound support
  • From: Kuninori Morimoto
• [RFC PATCH] mmc: tmio: use ioread* for repeated access to a register
  • From: Wolfram Sang
• Re: [PATCH v3 2/2] drm: rcar-du: calculate DPLLCR to be more small jitter
  • From: Kuninori Morimoto
• Re: [PATCH 5/5] v4l2: async: Add debug output to v4l2-async module
  • From: Sakari Ailus
• Re: [PATCH 4/5] v4l2: async: Postpone subdev_notifier registration
  • From: Sakari Ailus
• Re: [PATCH] bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate
  • From: Rafael J. Wysocki
• Re: [PATCH 5/5] v4l2: async: Add debug output to v4l2-async module
  • From: Laurent Pinchart
• Re: [PATCH 4/5] v4l2: async: Postpone subdev_notifier registration
  • From: Laurent Pinchart
• Re: [PATCH 3/5] include: v4l2_async: Add 'owner' field to notifier
  • From: Laurent Pinchart
• Re: [PATCH 2/5] device property: Add fwnode_get_name() operation
  • From: Laurent Pinchart
• Re: [PATCH 1/5] v4l: async: Use endpoint node, not device node, for fwnode match
  • From: Laurent Pinchart
• Re: [PATCH 5/5] v4l2: async: Add debug output to v4l2-async module
  • From: jacopo mondi
• Re: [PATCH 4/5] v4l2: async: Postpone subdev_notifier registration
  • From: jacopo mondi
• Re: [PATCH 4/5] v4l2: async: Postpone subdev_notifier registration
  • From: Kieran Bingham
• Re: [PATCH 4/5] v4l2: async: Postpone subdev_notifier registration
  • From: Kieran Bingham
• Re: [tty:tty-next 23/34] include/linux/kconfig.h:5:10: fatal error: generated/autoconf.h: No such file or directory
  • From: Greg Kroah-Hartman
• Re: [tty:tty-next 23/34] include/linux/kconfig.h:5:10: fatal error: generated/autoconf.h: No such file or directory
  • From: Geert Uytterhoeven
• [GIT PULL for renesas-drivers] Display color keying support for Gen3
  • From: Laurent Pinchart
• [PATCH/RFC 4/4] drm: rcar-du: Add support for color keying on Gen3
  • From: Laurent Pinchart
• [PATCH/RFC 3/4] v4l: vsp1: Add support for colorkey alpha blending
  • From: Laurent Pinchart
• [PATCH/RFC 2/4] drm: rcar-du: Use standard colorkey properties
  • From: Laurent Pinchart
• [PATCH/RFC 0/4] Implement standard color keying properties
  • From: Laurent Pinchart
• [PATCH/RFC 1/4] drm: Add colorkey properties
  • From: Laurent Pinchart
• Re: [PATCH v2 6/6] phy: renesas: rcar-gen3-usb2: add gpio handling
  • From: Rob Herring
• Re: [PATCH 0/4] kms++util: Provide validation helpers
  • From: Kieran Bingham
• Re: [PATCH 4/4] kms++util: Add frame compare functionality
  • From: Kieran Bingham
• Re: [PATCH 3/4] kms++util: Add verification module
  • From: Kieran Bingham
• Re: [PATCH 2/6] dt-bindings: pwm: rcar: Document r8a774[35] PWM bindings
  • From: Rob Herring
• Re: [PATCH 1/2] dt-bindings: thermal: rcar: Add device tree support for r8a7743
  • From: Rob Herring
• Re: [PATCH 1/3] dt-bindings: timer: renesas, cmt: Document r8a774[35] CMT support
  • From: Rob Herring
• Re: [PATCH 4/6] dt-bindings: pwm: renesas-tpu: Document r8a774[35] support
  • From: Rob Herring
• Re: [PATCH v2 00/22] mmc: tmio: various fixes and cleanups
  • From: Wolfram Sang
• Re: arm64: unhandled level 0 translation fault
  • From: Dave Martin
• Re: [PATCH v2 00/22] mmc: tmio: various fixes and cleanups
  • From: Wolfram Sang
• Re: [PATCH v2 00/22] mmc: tmio: various fixes and cleanups
  • From: Ulf Hansson
• Re: [PATCH 5/5] v4l2: async: Add debug output to v4l2-async module
  • From: Sakari Ailus
• Re: arm64: unhandled level 0 translation fault
  • From: Will Deacon
• Re: [PATCH 3/3] PM / Domains: Take WAKEUP_PATH driver flag into account in genpd
  • From: Ulf Hansson
• [PULL REQUEST] renesas/topic/rcar-i2c-recovery for renesas drivers
  • From: Wolfram Sang
• Re: arm64: unhandled level 0 translation fault
  • From: Geert Uytterhoeven
• Re: arm64: unhandled level 0 translation fault
  • From: Geert Uytterhoeven
• [PATCH 3/3] PM / Domains: Take WAKEUP_PATH driver flag into account in genpd
  • From: Ulf Hansson
• [PATCH 2/3] PM / core: Add WAKEUP_PATH driver flag
  • From: Ulf Hansson
• [PATCH 1/3] PM / core: Assign the wakeup_path status flag in __device_prepare()
  • From: Ulf Hansson
• [PATCH 0/3] PM / core: Extend behaviour for wakeup paths
  • From: Ulf Hansson
• [PULL REQUEST] renesas/topc/ip-switch-rework-2017 for renesas drivers
  • From: Wolfram Sang
• Re: [PATCH 4/5] v4l2: async: Postpone subdev_notifier registration
  • From: Sakari Ailus
• [PATCH 7/7] drm/img-rogue: replace call to obsolete drm_platform_init()
  • From: Ulrich Hecht
• [PATCH 6/7] drm/img-rogue: init_timer() -> setup_timer()
  • From: Ulrich Hecht
• [PATCH 5/7] drm/img-rogue: dma_ops->sync_single_for_*() -> dma_sync_single_for_*()
  • From: Ulrich Hecht
• [PATCH 4/7] drm/img-rogue: dma_buf_ops .kmap_* are now .map_*
  • From: Ulrich Hecht
• [PATCH 3/7] drm/img-rogue: #include <linux/sched/clock.h> in osfunc.c
  • From: Ulrich Hecht
• [PATCH 2/7] drm/img-rogue: change #include <asm/uaccess.h> to <linux/uaccess.h>
  • From: Ulrich Hecht
• [PATCH 1/7] drm/img-rogue: adapt to changed fence API
  • From: Ulrich Hecht
• [PATCH 0/7] up-port of out-of-tree GSX GPU driver for r8a7796
  • From: Ulrich Hecht
• [PATCH 4/4] arm64: dts: r8a7796: Add DEVFREQ support for GSX
  • From: Ulrich Hecht
• [PATCH 3/4] arm64: dts: r8a7796: Add GSX device node
  • From: Ulrich Hecht
• [PATCH 2/4] clk: renesas: rcar-gen3: Add ZG clock divider support
  • From: Ulrich Hecht
• [PATCH 1/4] clk: renesas: r8a7796: Add ZG clock
  • From: Ulrich Hecht
• [PATCH 0/4] r8a7796 bits required for out-of-tree GSX module
  • From: Ulrich Hecht
• [PATCH 5/5] ARM: dts: iwg20d-q7-common: Sound DMA support via DVC on DTS
  • From: Biju Das
• [PATCH 4/5] ARM: dts: iwg20d-q7-common: Sound DMA support via SRC on DTS
  • From: Biju Das
• [PATCH 3/5] ARM: dts: iwg20d-q7-common: Sound DMA support via BUSIF on DTS
  • From: Biju Das
• [PATCH 2/5] ARM: dts: iwg20d-q7-common: Sound DMA support on DTS
  • From: Biju Das
• [PATCH 1/5] ARM: dts: iwg20d-q7-common: Sound PIO support
  • From: Biju Das
• [PATCH 0/5] Add sound support
  • From: Biju Das
• Re: [PATCH 3/5] include: v4l2_async: Add 'owner' field to notifier
  • From: Sakari Ailus
• Re: [PATCH/RFC v2 10/15] adv748x: csi2: add translation from pixelcode to CSI-2 datatype
  • From: jacopo mondi
• Re: [PATCH 2/5] device property: Add fwnode_get_name() operation
  • From: Sakari Ailus
• Re: arm64: unhandled level 0 translation fault
  • From: Will Deacon
• Re: [PATCH] v4l: rcar-csi2: Don't bail out from probe on no ep
  • From: Niklas Söderlund
• Re: [PATCH/RFC v2 07/15] rcar-csi2: use frame description information to configure CSI-2 bus
  • From: jacopo mondi
• Re: [PATCH 0/4] kms++util: Provide validation helpers
  • From: Tomi Valkeinen
• Re: [PATCH 4/4] kms++util: Add frame compare functionality
  • From: Tomi Valkeinen
• Re: [PATCH] v4l: rcar-csi2: Don't bail out from probe on no ep
  • From: Hans Verkuil
• [PATCH] [kms-tests] tests: Add colorkey test
  • From: Laurent Pinchart
• Re: [PATCH 3/4] kms++util: Add verification module
  • From: Tomi Valkeinen
• Re: [PATCH v2 00/22] mmc: tmio: various fixes and cleanups
  • From: Ulf Hansson
• Re: arm64: unhandled level 0 translation fault
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC v2 06/15] rcar-csi2: use frame description information when propagating .s_stream()
  • From: Sakari Ailus
• Re: [PATCH/RFC v2 05/15] rcar-csi2: count usage for each source pad
  • From: Sakari Ailus
• Re: [PATCH/RFC v2 03/15] rcar-vin: use the pad and stream aware s_stream
  • From: Sakari Ailus
• Re: [PATCH/RFC v2 02/15] rcar-vin: use pad as the starting point for a pipeline
  • From: Sakari Ailus
• Re: [PATCH/RFC v2 01/15] v4l2-subdev.h: add pad and stream aware s_stream
  • From: Sakari Ailus
• Re: arm64: unhandled level 0 translation fault
  • From: Dave Martin
• Re: [PATCH v2 00/22] mmc: tmio: various fixes and cleanups
  • From: Wolfram Sang