On DT platforms, the sh-sci driver requires the presence of "serialN"
aliases in DT, from which instance IDs are derived. If a DT alias is
missing, the drivers fails to probe the corresponding serial port.
This becomes cumbersome when considering DT overlays, as currently
there is no upstream support for dynamically updating the /aliases node
in DT. Furthermore, even in the presence of such support, hardcoded
instance IDs in independent overlays are prone to conflicts.
Hence add support for dynamic instance IDs, to be used in the absence of
a DT alias. This makes serial ports behave similar to I2C and SPI
buses, which already support dynamic instances.
Ports in use are tracked using a simple bitmask of type unsigned long,
which is sufficient to handle all current hardware (max. 18 ports).
The maximum number of serial ports is still fixed, and configurable
through Kconfig. Range validation is done through both Kconfig and a
compile-time check.
Due to the fixed maximum number of serial ports, dynamic and static
instances share the same ID space. Static instances added later are
rejected when conflicting with dynamic instances registered earlier.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
drivers/tty/serial/Kconfig | 2 ++
drivers/tty/serial/sh-sci.c | 8 ++++++++
2 files changed, 10 insertions(+)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 3682fd3e960cbd64..76005dc5f6246593 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -762,6 +762,8 @@ config SERIAL_SH_SCI
config SERIAL_SH_SCI_NR_UARTS
int "Maximum number of SCI(F) serial ports" if EXPERT
+ range 1 64 if 64BIT
+ range 1 32 if !64BIT
depends on SERIAL_SH_SCI
default "3" if H8300
default "10" if SUPERH
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 9e1dfbb4b40bf849..3a03d391fcc72656 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -159,6 +159,7 @@ struct sci_port {
#define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
static struct sci_port sci_ports[SCI_NPORTS];
+static unsigned long sci_ports_in_use;
static struct uart_driver sci_uart_driver;
static inline struct sci_port *
@@ -3011,6 +3012,7 @@ static int sci_remove(struct platform_device *dev)
{
struct sci_port *port = platform_get_drvdata(dev);
+ sci_ports_in_use &= ~BIT(port->port.line);
uart_remove_one_port(&sci_uart_driver, &port->port);
sci_cleanup_single(port);
@@ -3092,6 +3094,8 @@ static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev,
/* Get the line number from the aliases node. */
id = of_alias_get_id(np, "serial");
+ if (id < 0 && ~sci_ports_in_use)
+ id = ffz(sci_ports_in_use);
if (id < 0) {
dev_err(&pdev->dev, "failed to get alias id (%d)\n", id);
return NULL;
@@ -3126,6 +3130,9 @@ static int sci_probe_single(struct platform_device *dev,
dev_notice(&dev->dev, "Consider bumping CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
return -EINVAL;
}
+ BUILD_BUG_ON(SCI_NPORTS > sizeof(sci_ports_in_use) * 8);
+ if (sci_ports_in_use & BIT(index))
+ return -EBUSY;
mutex_lock(&sci_uart_registration_lock);
if (!sci_uart_driver.state) {
@@ -3224,6 +3231,7 @@ static int sci_probe(struct platform_device *dev)
sh_bios_gdb_detach();
#endif
+ sci_ports_in_use |= BIT(dev_id);
return 0;
}
--
2.7.4
