Linux Renesas SOC
[Prev Page][Next Page]
- Re: [PATCH 3/4] ARM: dts: renesas: rskrza1: use interrupts-extended for gpio-keys
- Re: [PATCH] mmc: sh_mmcif: correctly report success when obtaining DMA channels
- Re: [PATCH 4/4] ARM: dts: renesas: rza2mevb: use interrupts-extended for gpio-keys
- Re: [PATCH 3/4] ARM: dts: renesas: rskrza1: use interrupts-extended for gpio-keys
- Re: [PATCH 2/4] ARM: dts: renesas: genmai: use interrupts-extended for gpio-keys
- Re: [PATCH 1/4] ARM: dts: renesas: marzen: use interrupts-extended for gpio-keys
- Re: [PATCH] mmc: sh_mmcif: correctly report success when obtaining DMA channels
- Re: [PATCH v2 15/16] media: renesas: rzg2l-cru: Refactor ICnDMR register configuration
- Patchwork summary for: linux-renesas-soc
- From: patchwork-bot+linux-renesas-soc
- Re: [PATCH v2 10/16] media: platform: rzg2l-cru: Simplify handling of supported formats
- Re: [PATCH v2 14/16] media: platform: rzg2l-cru: rzg2l-csi2: Make use of rzg2l_csi2_formats array in rzg2l_csi2_enum_frame_size()
- Re: [PATCH v2 14/16] media: platform: rzg2l-cru: rzg2l-csi2: Make use of rzg2l_csi2_formats array in rzg2l_csi2_enum_frame_size()
- Re: [PATCH v2 14/16] media: platform: rzg2l-cru: rzg2l-csi2: Make use of rzg2l_csi2_formats array in rzg2l_csi2_enum_frame_size()
- Re: [PATCH v2 04/16] media: platform: rzg2l-cru: rzg2l-csi2: Make use of NR_OF_RZG2L_CSI2_PAD
- Re: [PATCH v2 03/16] media: platform: rzg2l-cru: rzg2l-csi2: Mark sink and source pad with MUST_CONNECT flag
- Re: [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line
- [PATCH] v4l2-subdev: Return -EOPNOTSUPP for unsupported pad type in call_get_frame_desc()
- RE: [PATCH] arm64: dts: renesas: rcar-gen4: Switch PCIe to reset-gpios
- [PATCH] mmc: sh_mmcif: correctly report success when obtaining DMA channels
- [PATCH v2 3/3] ARM: dts: renesas: genmai: enable MMCIF
- [PATCH v2 0/3] ARM: dts: renesas: genmai: enable SDHI and MMCIF
- [PATCH v2 1/3] ARM: dts: renesas: genmai: enable SDHI0
- [PATCH v2 2/3] ARM: dts: renesas: r7s72100: 'bus-width' is a board property
- Re: [PATCH] dt-bindings: input: gpio-keys: allow generic 'interrupt-parent' for subnodes
- From: Krzysztof Kozlowski
- Re: [PATCH v2 16/16] media: platform: rzg2l-cru: Add support to capture 8bit raw sRGB
- Re: [PATCH v2 15/16] media: renesas: rzg2l-cru: Refactor ICnDMR register configuration
- Re: [PATCH v2 14/16] media: platform: rzg2l-cru: rzg2l-csi2: Make use of rzg2l_csi2_formats array in rzg2l_csi2_enum_frame_size()
- Re: [PATCH v2 13/16] media: platform: rzg2l-cru: rzg2l-video: Use rzg2l_cru_ip_code_to_fmt() to validate format
- Re: [PATCH v2 12/16] media: platform: rzg2l-cru: rzg2l-csi2: Remove unused datatype field from rzg2l_csi2_format
- Re: [PATCH v2 11/16] media: platform: rzg2l-cru: rzg2l-ip: Use `rzg2l_cru_ip_formats` array in enum_frame_size callback
- Re: [PATCH v2 10/16] media: platform: rzg2l-cru: Simplify handling of supported formats
- Re: [PATCH v2 09/16] media: platform: rzg2l-cru: Remove unused fields from rzg2l_cru_ip_format struct
- Re: [PATCH v2 08/16] media: platform: rzg2l-cru: rzg2l-video: Use MIPI CSI-2 data types for ICnMC_INF definitions
- Re: [PATCH v2 07/16] media: platform: rzg2l-cru: Remove `channel` member from `struct rzg2l_cru_csi`
- Re: [PATCH v2 04/16] media: platform: rzg2l-cru: rzg2l-csi2: Make use of NR_OF_RZG2L_CSI2_PAD
- Re: [PATCH v2 03/16] media: platform: rzg2l-cru: rzg2l-csi2: Mark sink and source pad with MUST_CONNECT flag
- Re: [PATCH v2 02/16] media: platform: rzg2l-cru: Mark sink pads with MUST_CONNECT flag
- Re: [PATCH v7 2/2] hwmon: (isl28022) new driver for ISL28022 power monitor
- Re: [PATCH v2 01/16] media: platform: rzg2l-cru: rzg2l-ip: Use the RZG2L_CRU_IP_SINK/SOURCE enum entries
- Re: [PATCH] dt-bindings: input: gpio-keys: allow generic 'interrupt-parent' for subnodes
- [PATCH 3/3] arm64: dts: renesas: beacon: Add SD/OE pin properties
- [PATCH 2/3] arm64: dts: renesas: hihope: Add SD/OE pin properties
- [PATCH 1/3] arm64: dts: renesas: salvator-x: Add SD/OE pin properties
- [PATCH 0/3] arm64: dts: renesas: Add SD/OE pin properties (part B)
- Re: [PATCH treewide 00/11] ASoC: Clean up {hp,mic}-det-gpio handling
- Re: [PATCH] ARM: dts: renesas: rskrza1: Enable watchdog timer
- Re: [PATCH v2 11/11] media: i2c: ov5645: Report streams using frame descriptors
- Re: [PATCH v2 09/11] media: i2c: ov5645: Add internal image sink pad
- Re: [PATCH v2 11/11] media: i2c: ov5645: Report streams using frame descriptors
- Re: [PATCH treewide 00/11] ASoC: Clean up {hp,mic}-det-gpio handling
- Re: [PATCH treewide 10/11] ARM: dts: nxp: imx: Switch to {hp,mic}-det-gpios
- Re: [PATCH treewide 10/11] ARM: dts: nxp: imx: Switch to {hp,mic}-det-gpios
- From: Krzysztof Kozlowski
- Re: [PATCH treewide 05/11] arm64: dts: renesas: beacon-renesom: Switch to mic-det-gpios
- Re: [PATCH treewide 09/11] mips: dts: ingenic: Switch to simple-audio-card,hp-det-gpios
- From: Krzysztof Kozlowski
- Re: [PATCH treewide 08/11] arm64: dts: uniphier: Switch to hp-det-gpios
- From: Krzysztof Kozlowski
- Re: [PATCH treewide 07/11] arm64: dts: rockchip: Switch to hp-det-gpios
- From: Krzysztof Kozlowski
- [PATCH] ARM: dts: renesas: rskrza1: Enable watchdog timer
- Re: [PATCH treewide 06/11] arm64: dts: rockchip: Switch to simple-audio-card,hp-det-gpios
- From: Krzysztof Kozlowski
- Re: [PATCH treewide 05/11] arm64: dts: renesas: beacon-renesom: Switch to mic-det-gpios
- From: Krzysztof Kozlowski
- Re: [PATCH treewide 04/11] arm64: dts: freescale: imx: Switch to simple-audio-card,hp-det-gpios
- From: Krzysztof Kozlowski
- Re: [PATCH treewide 03/11] ARM: dts: marvell: mmp2-olpc-xo-1-75: Switch to {hp,mic}-det-gpios
- From: Krzysztof Kozlowski
- [PATCH treewide 06/11] arm64: dts: rockchip: Switch to simple-audio-card,hp-det-gpios
- Re: [PATCH treewide 02/11] ASoC: dt-bindings: Deprecate {hp,mic}-det-gpio
- From: Krzysztof Kozlowski
- Re: [PATCH 0/2] arm64: dts: renesas: Add SD/OE pin properties
- Re: [PATCH treewide 01/11] ASoC: fsl-asoc-card: Add missing handling of {hp,mic}-dt-gpios
- From: Krzysztof Kozlowski
- [PATCH treewide 01/11] ASoC: fsl-asoc-card: Add missing handling of {hp,mic}-dt-gpios
- [PATCH treewide 02/11] ASoC: dt-bindings: Deprecate {hp,mic}-det-gpio
- [PATCH treewide 11/11] arm64: dts: freescale: imx: Switch to hp-det-gpios
- [PATCH treewide 00/11] ASoC: Clean up {hp,mic}-det-gpio handling
- [PATCH treewide 04/11] arm64: dts: freescale: imx: Switch to simple-audio-card,hp-det-gpios
- [PATCH treewide 10/11] ARM: dts: nxp: imx: Switch to {hp,mic}-det-gpios
- [PATCH treewide 03/11] ARM: dts: marvell: mmp2-olpc-xo-1-75: Switch to {hp,mic}-det-gpios
- [PATCH treewide 08/11] arm64: dts: uniphier: Switch to hp-det-gpios
- [PATCH treewide 05/11] arm64: dts: renesas: beacon-renesom: Switch to mic-det-gpios
- [PATCH treewide 07/11] arm64: dts: rockchip: Switch to hp-det-gpios
- [PATCH treewide 09/11] mips: dts: ingenic: Switch to simple-audio-card,hp-det-gpios
- Re: [PATCH 0/2] arm64: dts: renesas: Add SD/OE pin properties
- Re: [PATCH 3/4] ARM: dts: renesas: rskrza1: use interrupts-extended for gpio-keys
- From: Krzysztof Kozlowski
- Re: [PATCH 2/4] ARM: dts: renesas: genmai: use interrupts-extended for gpio-keys
- From: Krzysztof Kozlowski
- Re: [PATCH 1/4] ARM: dts: renesas: marzen: use interrupts-extended for gpio-keys
- From: Krzysztof Kozlowski
- Re: [PATCH 0/2] arm64: dts: renesas: Add SD/OE pin properties
- [PATCH] arm64: dts: renesas: rcar-gen4: Switch PCIe to reset-gpios
- Re: [PATCH 2/2] arm64: dts: renesas: ulcb: Add SD/OE pin properties
- Re: [PATCH 1/2] arm64: dts: renesas: salvator-xs: Add SD/OE pin properties
- Re: [PATCH 0/2] arm64: dts: renesas: Add SD/OE pin properties
- [PATCH 4/4] ARM: dts: renesas: rza2mevb: use interrupts-extended for gpio-keys
- [PATCH 1/4] ARM: dts: renesas: marzen: use interrupts-extended for gpio-keys
- [PATCH 3/4] ARM: dts: renesas: rskrza1: use interrupts-extended for gpio-keys
- [PATCH 2/4] ARM: dts: renesas: genmai: use interrupts-extended for gpio-keys
- [PATCH 0/4] ARM: dts: renesas: use interrupts-extended for gpio-keys
- Re: [PATCH] dt-bindings: input: gpio-keys: allow generic 'interrupt-parent' for subnodes
- Re: [PATCH] dt-bindings: input: gpio-keys: allow generic 'interrupt-parent' for subnodes
- Re: [PATCH] dt-bindings: input: gpio-keys: allow generic 'interrupt-parent' for subnodes
- From: Krzysztof Kozlowski
- [PATCH] dt-bindings: input: gpio-keys: allow generic 'interrupt-parent' for subnodes
- Re: [PATCH v7 2/2] hwmon: (isl28022) new driver for ISL28022 power monitor
- Re: [PATCH] ASoC: dt-bindings: renesas,rsnd: correct reg-names for R-Car Gen1
- Re: [PATCH v2 11/11] media: i2c: ov5645: Report streams using frame descriptors
- Re: [PATCH] ASoC: dt-bindings: renesas,rsnd: correct reg-names for R-Car Gen1
- Re: [PATCH 0/2] arm64: dts: renesas: Add SD/OE pin properties
- [PATCH 2/2] arm64: dts: renesas: ulcb: Add SD/OE pin properties
- [PATCH 1/2] arm64: dts: renesas: salvator-xs: Add SD/OE pin properties
- [PATCH 0/2] arm64: dts: renesas: Add SD/OE pin properties
- Re: [PATCH v2 11/11] media: i2c: ov5645: Report streams using frame descriptors
- Re: [PATCH v2 09/11] media: i2c: ov5645: Add internal image sink pad
- Re: [PATCH v2 11/11] media: i2c: ov5645: Report streams using frame descriptors
- Re: [PATCH 1/4] media: v4l2-subdev: Add cleanup macros for active state
- Re: [PATCH 4/5] ARM: dts: renesas: genmai: sort pinctrl entries
- Re: [PATCH] ARM: dts: renesas: genmai: update audio codec bindings
- Re: [PATCH] ARM: dts: renesas: remove 'reg-io-width' properties from MMCIF nodes
- Re: [PATCH 5/5] ARM: dts: renesas: genmai: define keyboard switch
- Re: [PATCH 4/5] ARM: dts: renesas: genmai: sort pinctrl entries
- Re: [PATCH 3/5] ARM: dts: renesas: genmai: sort nodes
- Re: [PATCH 2/5] ARM: dts: renesas: genmai: enable OS timer modules
- Re: [PATCH 1/5] ARM: dts: renesas: genmai: enable watchdog
- Re: [PATCH] ARM: dts: renesas: genmai: Fix partition size for QSPI NOR Flash
- Re: [PATCH] ASoC: dt-bindings: renesas,rsnd: correct reg-names for R-Car Gen1
- [PATCH] ASoC: dt-bindings: renesas,rsnd: correct reg-names for R-Car Gen1
- [PATCH 1/3] ARM: dts: renesas: lager: use proper node names for keys
- [PATCH 2/3] ARM: dts: renesas: alt: use proper node names for keys
- [PATCH 3/3] ARM: dts: renesas: kzm9d: use proper node names for keys
- [PATCH 0/3] ARM: dts: renesas: use proper node names for keys
- [PATCH v2 1/2] ARM: dts: renesas: add proper node names to (L)BSC devices
- [PATCH v2 2/2] ARM: dts: renesas: r8a7778: rename 'bsc' to 'lbsc'
- [PATCH v2 0/2] ARM: dts: renesas: fix BSC nodes
- [PATCH 2/3] ARM: dts: renesas: r7s72100: 'bus-width' is a board property
- [PATCH 3/3] ARM: dts: renesas: genmai: enable MMCIF
- [PATCH 0/3] ARM: dts: renesas: genmai: enable SDHI and MMCIF
- [PATCH 1/3] ARM: dts: renesas: genmai: enable SDHI0
- Re: [PATCH v2 11/11] media: i2c: ov5645: Report streams using frame descriptors
- Re: [PATCH 1/2] ARM: dts: renesas: add proper node names to (L)BSC devices
- [PATCH] pinctrl: renesas: rza1: mark GPIOs as used
- Re: [PATCH 1/2] ARM: dts: renesas: add proper node names to (L)BSC devices
- Re: [PATCH 1/2] ARM: dts: renesas: add proper node names to (L)BSC devices
- [PATCH 1/2] ARM: dts: renesas: add proper node names to (L)BSC devices
- [PATCH 0/2] ARM: dts: renesas: fix BSC nodes
- [PATCH 2/2] ARM: dts: renesas: r8a7778: rename 'bsc' to 'lbsc'
- Re: [PATCH v7 2/2] hwmon: (isl28022) new driver for ISL28022 power monitor
- Re: [PATCH 1/4] media: v4l2-subdev: Add cleanup macros for active state
- Re: [PATCH v2 11/11] media: i2c: ov5645: Report streams using frame descriptors
- Re: [PATCH v2 09/11] media: i2c: ov5645: Add internal image sink pad
- Re: [PATCH 2/2] arm64: dts: renesas: r8a779h0: gray-hawk-single: Enable PCIe Host
- Re: [PATCH 1/2] arm64: dts: renesas: r8a779h0: Add PCIe Host and Endpoint nodes
- Re: [PATCH v21 3/4] pwm: Add support for RZ/G2L GPT
- Re: [PATCH v2 06/11] media: i2c: ov5645: Drop `power_lock` mutex
- Re: [PATCH v2 05/11] media: i2c: ov5645: Use v4l2_async_register_subdev_sensor()
- Re: [PATCH v2 04/11] media: i2c: ov5645: Use dev_err_probe instead of dev_err
- Re: [PATCH v2 03/11] media: i2c: ov5645: Enable runtime PM after v4l2_async_register_subdev()
- [PATCH] ARM: dts: renesas: remove 'reg-io-width' properties from MMCIF nodes
- Re: [PATCH v7 2/2] hwmon: (isl28022) new driver for ISL28022 power monitor
- Re: [PATCH v7 2/2] hwmon: (isl28022) new driver for ISL28022 power monitor
- Re: [net-next 3/3] net: phy: marvell-88q2xxx: Enable auto negotiation for mv88q2110
- From: Stefan Eichenberger
- Re: [net-next 1/3] net: phy: marvell-88q2xxx: Align soft reset for mv88q2110 and mv88q2220
- From: Stefan Eichenberger
- Re: [net-next 2/3] net: phy: marvell-88q2xxx: Make register writer function generic
- From: Stefan Eichenberger
- Re: [net-next 3/3] net: phy: marvell-88q2xxx: Enable auto negotiation for mv88q2110
- From: Stefan Eichenberger
- [PATCH] ARM: dts: renesas: genmai: update audio codec bindings
- Re: [PATCH 0/5] ARM: dts: renesas: bring genmai up to date - the easy stuff
- Re: [PATCH 04/16] soc: renesas: Add SYSC driver for Renesas RZ/G3S
- Re: [PATCH v7 1/2] dt-bindings: hwmon: add renesas,isl28022
- From: Krzysztof Kozlowski
- Re: [PATCH v7 0/2] hwmon: (isl28022) new driver for ISL28022 power monitor
- From: Krzysztof Kozlowski
- Re: [PATCH v7 2/2] hwmon: (isl28022) new driver for ISL28022 power monitor
- [PATCH v7 2/2] hwmon: (isl28022) new driver for ISL28022 power monitor
- [PATCH v7 1/2] dt-bindings: hwmon: add renesas,isl28022
- [PATCH v7 0/2] hwmon: (isl28022) new driver for ISL28022 power monitor
- Re: [PATCH 0/5] ARM: dts: renesas: bring genmai up to date - the easy stuff
- Re: [PATCH v2 08/11] media: i2c: ov5645: Switch to {enable,disable}_streams
- Re: [PATCH v2 07/11] media: i2c: ov5645: Use subdev active state
- Re: [PATCH v2 06/11] media: i2c: ov5645: Drop `power_lock` mutex
- Re: [PATCH v2 05/11] media: i2c: ov5645: Use v4l2_async_register_subdev_sensor()
- Re: [PATCH v2 04/11] media: i2c: ov5645: Use dev_err_probe instead of dev_err
- Re: [PATCH v2 03/11] media: i2c: ov5645: Enable runtime PM after v4l2_async_register_subdev()
- Re: [PATCH v2 02/11] media: i2c: ov5645: Use local `dev` pointer for subdev device assignment
- Re: [PATCH v2 01/11] media: i2c: ov5645: Add V4L2_SUBDEV_FL_HAS_EVENTS and subscribe hooks
- Re: [PATCH 1/4] media: v4l2-subdev: Add cleanup macros for active state
- Re: [PATCH 3/4] media: renesas: Use state cleanup macros
- Re: [PATCH 1/4] media: v4l2-subdev: Add cleanup macros for active state
- Re: [PATCH] RISC-V: defconfig: Remove ARCH_RENESAS
- Re: [PATCH] drm: renesas: shmobile: Add drm_panic support
- Re: [PATCH] drm: renesas: rcar-du: Add drm_panic support for non-vsp
- Re: [PATCH 04/16] soc: renesas: Add SYSC driver for Renesas RZ/G3S
- Re: [net PATCH v3 0/2] Fix maximum TX/RX frame sizes in ravb driver
- From: patchwork-bot+netdevbpf
- Re: [PATCH] mtd: spi-nor: spansion: Add SMPT fixup for S25FS512S
- Re: [PATCH v2 5/6] dt-bindings: media: renesas,isp: Add binding for V4M
- From: Krzysztof Kozlowski
- Re: [PATCH 3/4] media: renesas: Use state cleanup macros
- Re: [PATCH] clk: Switch back to struct platform_driver::remove()
- Re: [PATCH 5/6] irqchip: Add RZ/V2H(P) Interrupt Control Unit (ICU) driver (fwd)
- [PATCH 2/5] ARM: dts: renesas: genmai: enable OS timer modules
- [PATCH 5/5] ARM: dts: renesas: genmai: define keyboard switch
- [PATCH 4/5] ARM: dts: renesas: genmai: sort pinctrl entries
- [PATCH 3/5] ARM: dts: renesas: genmai: sort nodes
- [PATCH 1/5] ARM: dts: renesas: genmai: enable watchdog
- [PATCH 0/5] ARM: dts: renesas: bring genmai up to date - the easy stuff
- Re: [PATCH 1/3] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input-schmitt-{enable,disable}' and 'drive-open-drain' properties
- [PATCH v1] usb: gadget: udc: fix typo in the comment
- [geert-renesas-drivers:master] BUILD SUCCESS 2f8da8f15a395c1c16b327d77497a5b363356afd
- Re: [net PATCH v3 2/2] net: ravb: Fix R-Car RX frame size limit
- Re: [net PATCH v3 1/2] net: ravb: Fix maximum TX frame size for GbEth devices
- RE: [PATCH 3/6] dt-bindings: interrupt-controller: Add Renesas RZ/V2H(P) Interrupt Controller
- Re: [PATCH 3/6] dt-bindings: interrupt-controller: Add Renesas RZ/V2H(P) Interrupt Controller
- [PATCH] clk: renesas: r9a09g057: Add CA55 core clocks
- [PATCH 3/3] pinctrl: renesas: rzg2l: Add support for configuring schmitt-trigger
- [PATCH 2/3] pinctrl: renesas: rzg2l: Add support for configuring open-drain outputs
- [PATCH 1/3] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input-schmitt-{enable,disable}' and 'drive-open-drain' properties
- [PATCH 0/3] pinctrl: renesas: rzg2l: Add support to configure open-drain and schmitt-trigger properties
- RE: [PATCH 1/6] dt-bindings: pinctrl: renesas: rzg2l-pinctrl: Add interrupt-parent
- [net PATCH v3 2/2] net: ravb: Fix R-Car RX frame size limit
- [net PATCH v3 1/2] net: ravb: Fix maximum TX frame size for GbEth devices
- [net PATCH v3 0/2] Fix maximum TX/RX frame sizes in ravb driver
- Re: [PATCH 1/6] dt-bindings: pinctrl: renesas: rzg2l-pinctrl: Add interrupt-parent
- [geert-renesas-devel:master] BUILD SUCCESS f3faa03b1df0ceadd96a121b2b72e7c0fd78fc20
- Re: [PATCH 1/6] dt-bindings: pinctrl: renesas: rzg2l-pinctrl: Add interrupt-parent
- [PATCH 1/6] dt-bindings: pinctrl: renesas: rzg2l-pinctrl: Add interrupt-parent
- [PATCH 0/6] Add support for the RZ/V2H Interrupt Control Unit
- [PATCH 6/6] arm64: dts: renesas: r9a09g057: Add ICU node
- [PATCH 5/6] irqchip: Add RZ/V2H(P) Interrupt Control Unit (ICU) driver
- [PATCH 4/6] clk: renesas: r9a09g057: Add clock and reset entries for ICU
- [PATCH 3/6] dt-bindings: interrupt-controller: Add Renesas RZ/V2H(P) Interrupt Controller
- [PATCH 2/6] pinctrl: renesas: rzg2l: Remove RZG2L_TINT_IRQ_START_INDEX
- Re: [net-next 1/2] net: phy: Expose the direct mdiobus access functions
- From: Russell King (Oracle)
- Re: [net-next 2/2] net: phy: Fallback to C22 access if needed in phy_mii_ioctl()
- From: Russell King (Oracle)
- renesas-drivers-2024-09-17-v6.11
- [PATCH 4/4] media: i2c: ds90ub9xx: Use state cleanup macros
- [PATCH 3/4] media: renesas: Use state cleanup macros
- [PATCH 2/4] media: v4l2-subdev: Use state cleanup macros
- [PATCH 0/4] media: v4l2-subdev: Add cleanup macros for active state
- [PATCH 1/4] media: v4l2-subdev: Add cleanup macros for active state
- Re: [PATCH] RISC-V: defconfig: Remove ARCH_RENESAS
- Re: [PATCH/RFC] riscv: defconfig: Disable RZ/Five peripheral support
- [PATCH] RISC-V: defconfig: Remove ARCH_RENESAS
- renesas/master baseline-nfs: 14 runs, 1 regressions (renesas-devel-2024-09-16-v6.11)
- RE: [PATCH v4] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
- [PATCH] mtd: spi-nor: spansion: Add SMPT fixup for S25FS512S
- Re: [PATCH v5 00/11] i2c: riic: Add support for Renesas RZ/G3S
- Re: [PATCH] ARM: dts: renesas: genmai: Fix partition size for QSPI NOR Flash
- [PATCH] ARM: dts: renesas: genmai: Fix partition size for QSPI NOR Flash
- [PATCH v4] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
- Re: [PATCH v3] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
- [PATCH v3] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
- Re: [net-next 3/3] net: phy: marvell-88q2xxx: Enable auto negotiation for mv88q2110
- Re: [net-next 3/3] net: phy: marvell-88q2xxx: Enable auto negotiation for mv88q2110
- Re: [net-next 3/3] net: phy: marvell-88q2xxx: Enable auto negotiation for mv88q2110
- Re: [net-next 3/3] net: phy: marvell-88q2xxx: Enable auto negotiation for mv88q2110
- From: Stefan Eichenberger
- Re: [PATCH v7 0/4] PCI: qcom: Add 16.0 GT/s equalization and margining settings
- From: Krzysztof Wilczyński
- Re: [PATCH 0/4] pmdomain: core: Debug summary improvements
- Re: [PATCH 00/10] pmdomain: Simplify with cleanup.h
- Re: [net-next 2/3] net: phy: marvell-88q2xxx: Make register writer function generic
- Re: [net-next 1/3] net: phy: marvell-88q2xxx: Align soft reset for mv88q2110 and mv88q2220
- RE: [PATCH v21 0/4] Add support for RZ/G2L GPT
- Re: [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line
- Re: [PATCH v7 0/4] PCI: qcom: Add 16.0 GT/s equalization and margining settings
- Re: [PATCH v7 0/4] PCI: qcom: Add 16.0 GT/s equalization and margining settings
- Re: [PATCH v7 4/4] PCI: qcom: Add RX lane margining settings for 16.0 GT/s
- Re: [PATCH v7 3/4] PCI: qcom: Add equalization settings for 16.0 GT/s
- [PATCH v7 4/4] PCI: qcom: Add RX lane margining settings for 16.0 GT/s
- From: Manivannan Sadhasivam via B4 Relay
- [PATCH v7 3/4] PCI: qcom: Add equalization settings for 16.0 GT/s
- From: Manivannan Sadhasivam via B4 Relay
- [PATCH v7 2/4] PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
- From: Manivannan Sadhasivam via B4 Relay
- [PATCH v7 1/4] PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
- From: Manivannan Sadhasivam via B4 Relay
- [PATCH v7 0/4] PCI: qcom: Add 16.0 GT/s equalization and margining settings
- From: Manivannan Sadhasivam via B4 Relay
- Re: [PATCH] watchdog: rzv2h_wdt: Add missing MODULE_LICENSE tag to fix modpost error
- [PATCH] watchdog: rzv2h_wdt: Add missing MODULE_LICENSE tag to fix modpost error
- Re: [PATCH 2/8] drm: renesas: rcar-du: annotate rcar_cmm_read() with __maybe_unused
- Re: [PATCH 2/8] drm: renesas: rcar-du: annotate rcar_cmm_read() with __maybe_unused
- Re: [net-next 1/2] net: phy: Expose the direct mdiobus access functions
- Re: [net-next 3/3] net: phy: marvell-88q2xxx: Enable auto negotiation for mv88q2110
- Re: [net-next 2/3] net: phy: marvell-88q2xxx: Make register writer function generic
- Re: [net-next 1/3] net: phy: marvell-88q2xxx: Align soft reset for mv88q2110 and mv88q2220
- Re: [net-next 3/3] net: phy: marvell-88q2xxx: Enable auto negotiation for mv88q2110
- Re: [PATCH] i2c: support gpio-binding for SMBAlerts
- Re: [net-next 3/3] net: phy: marvell-88q2xxx: Enable auto negotiation for mv88q2110
- From: Stefan Eichenberger
- [PATCH v2 13/16] media: platform: rzg2l-cru: rzg2l-video: Use rzg2l_cru_ip_code_to_fmt() to validate format
- [PATCH v2 16/16] media: platform: rzg2l-cru: Add support to capture 8bit raw sRGB
- [PATCH v2 15/16] media: renesas: rzg2l-cru: Refactor ICnDMR register configuration
- [PATCH v2 14/16] media: platform: rzg2l-cru: rzg2l-csi2: Make use of rzg2l_csi2_formats array in rzg2l_csi2_enum_frame_size()
- [PATCH v2 12/16] media: platform: rzg2l-cru: rzg2l-csi2: Remove unused datatype field from rzg2l_csi2_format
- [PATCH v2 11/16] media: platform: rzg2l-cru: rzg2l-ip: Use `rzg2l_cru_ip_formats` array in enum_frame_size callback
- [PATCH v2 10/16] media: platform: rzg2l-cru: Simplify handling of supported formats
- [PATCH v2 09/16] media: platform: rzg2l-cru: Remove unused fields from rzg2l_cru_ip_format struct
- [PATCH v2 08/16] media: platform: rzg2l-cru: rzg2l-video: Use MIPI CSI-2 data types for ICnMC_INF definitions
- [PATCH v2 07/16] media: platform: rzg2l-cru: Remove `channel` member from `struct rzg2l_cru_csi`
- [PATCH v2 06/16] media: platform: rzg2l-cru: rzg2l-video: Retrieve virtual channel information
- [PATCH v2 05/16] media: platform: rzg2l-cru: rzg2l-csi2: Implement .get_frame_desc()
- [PATCH v2 04/16] media: platform: rzg2l-cru: rzg2l-csi2: Make use of NR_OF_RZG2L_CSI2_PAD
- [PATCH v2 03/16] media: platform: rzg2l-cru: rzg2l-csi2: Mark sink and source pad with MUST_CONNECT flag
- [PATCH v2 02/16] media: platform: rzg2l-cru: Mark sink pads with MUST_CONNECT flag
- [PATCH v2 01/16] media: platform: rzg2l-cru: rzg2l-ip: Use the RZG2L_CRU_IP_SINK/SOURCE enum entries
- [PATCH v2 00/16] media: platform: rzg2l-cru: CSI-2 and CRU enhancements
- [PATCH v2 11/11] media: i2c: ov5645: Report streams using frame descriptors
- [PATCH v2 10/11] media: i2c: ov5645: Report internal routes to userspace
- [PATCH v2 09/11] media: i2c: ov5645: Add internal image sink pad
- [PATCH v2 08/11] media: i2c: ov5645: Switch to {enable,disable}_streams
- [PATCH v2 07/11] media: i2c: ov5645: Use subdev active state
- [PATCH v2 06/11] media: i2c: ov5645: Drop `power_lock` mutex
- [PATCH v2 05/11] media: i2c: ov5645: Use v4l2_async_register_subdev_sensor()
- [PATCH v2 04/11] media: i2c: ov5645: Use dev_err_probe instead of dev_err
- [PATCH v2 03/11] media: i2c: ov5645: Enable runtime PM after v4l2_async_register_subdev()
- [PATCH v2 02/11] media: i2c: ov5645: Use local `dev` pointer for subdev device assignment
- [PATCH v2 01/11] media: i2c: ov5645: Add V4L2_SUBDEV_FL_HAS_EVENTS and subscribe hooks
- [PATCH v2 00/11] media: ov5645: Add support for streams
- Re: [PATCH v6 3/4] PCI: qcom: Add equalization settings for 16.0 GT/s
- From: Manivannan Sadhasivam
- Re: [net-next 3/3] net: phy: marvell-88q2xxx: Enable auto negotiation for mv88q2110
- Re: [PATCH] net: rswitch: Fix a possible memory leak in rswitch_phy_device_init()
- Re: [PATCH 2/8] drm: renesas: rcar-du: annotate rcar_cmm_read() with __maybe_unused
- Re: [PATCH 2/8] drm: renesas: rcar-du: annotate rcar_cmm_read() with __maybe_unused
- [PATCH 2/8] drm: renesas: rcar-du: annotate rcar_cmm_read() with __maybe_unused
- [geert-renesas-devel:master] BUILD SUCCESS ffa683ef29b60202bbf0854ac3f2453cf1bcd399
- Re: [PATCH v3 07/12] arm64: dts: renesas: r9a08g045: Add VBATTB node
- Re: [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line
- Re: [PATCH v6 3/3] hwmon: (isl28022) support shunt voltage for ISL28022 power monitor
- Re: [PATCH v4 3/3] i2c: jz4780: Use dev_err_probe()
- Re: [PATCH] clk: Switch back to struct platform_driver::remove()
- Re: [PATCH v3 07/12] arm64: dts: renesas: r9a08g045: Add VBATTB node
- Re: [PATCH v4 3/3] i2c: jz4780: Use dev_err_probe()
- Re: [PATCH v3] i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
- Re: [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line
- Re: [PATCH] clk: Switch back to struct platform_driver::remove()
- RE: [PATCH] media: dt-bindings: renesas,rzg2l-cru: Improve documentation
- [PATCH] clk: Switch back to struct platform_driver::remove()
- Re: [PATCH] media: dt-bindings: renesas,rzg2l-cru: Improve documentation
- Re: [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line
- Re: [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line
- Re: [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line
- Re: [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line
- Re: [PATCH 2/3] media: platform: rzg2l-cru: rzg2l-video: Retrieve virtual channel information
- Re: [PATCH v3 07/12] arm64: dts: renesas: r9a08g045: Add VBATTB node
- [PATCH] i2c: support gpio-binding for SMBAlerts
- [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line
- [PATCH] i2c: testunit: improve error handling for GPIO
- Re: [PATCH 2/3] media: platform: rzg2l-cru: rzg2l-video: Retrieve virtual channel information
- Re: [PATCH 2/3] media: platform: rzg2l-cru: rzg2l-video: Retrieve virtual channel information
- Re: [PATCH] clk: renesas: trivial: Remove duplicate and trailing empty lines
- Patchwork summary for: linux-renesas-soc
- From: patchwork-bot+linux-renesas-soc
- [PATCH] net: rswitch: Fix a possible memory leak in rswitch_phy_device_init()
- Re: [PATCH v4 3/3] i2c: jz4780: Use dev_err_probe()
- Re: [PATCH v4 3/3] i2c: jz4780: Use dev_err_probe()
- Re: [PATCH v4 3/3] i2c: jz4780: Use dev_err_probe()
- Re: [PATCH v2] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
- RE: [PATCH v2] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
- RE: [PATCH] media: platform: rzg2l-cru: rzg2l-video: Set AXI burst max length
- [PATCH v3] i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
- Re: [PATCH 2/3] media: platform: rzg2l-cru: rzg2l-video: Retrieve virtual channel information
- [PATCH] clk: renesas: trivial: Remove duplicate and trailing empty lines
- Re: [PATCH 2/3] media: platform: rzg2l-cru: rzg2l-video: Retrieve virtual channel information
- Re: [PATCH v2] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
- RE: [PATCH v2] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
- Re: [PATCH 2/3] media: platform: rzg2l-cru: rzg2l-video: Retrieve virtual channel information
- Re: [PATCH 1/3] media: platform: rzg2l-cru: rzg2l-csi2: Implement .get_frame_desc()
- Re: [PATCH v4 1/3] i2c: emev2: Use devm_clk_get_enabled() helpers
- Re: [PATCH] media: platform: rzg2l-cru: rzg2l-video: Set AXI burst max length
- [PATCH v2] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
- Re: [PATCH] media: platform: rzg2l-cru: rzg2l-video: Fix the comment in rzg2l_cru_start_streaming_vq()
- Re: [PATCH] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
- RE: [PATCH] media: platform: rzg2l-cru: rzg2l-video: Set AXI burst max length
- RE: [PATCH] media: platform: rzg2l-cru: rzg2l-video: Fix the comment in rzg2l_cru_start_streaming_vq()
- Re: [PATCH] media: platform: rzg2l-cru: rzg2l-video: Fix the comment in rzg2l_cru_start_streaming_vq()
- Re: [PATCH] media: platform: rzg2l-cru: rzg2l-video: Set AXI burst max length
- Re: [PATCH 3/3] media: platform: rzg2l-cru: Add support to capture 8bit raw sRGB
- Re: [PATCH 2/3] media: platform: rzg2l-cru: rzg2l-video: Retrieve virtual channel information
- Re: [PATCH v3 07/12] arm64: dts: renesas: r9a08g045: Add VBATTB node
- Re: [PATCH 1/3] media: platform: rzg2l-cru: rzg2l-csi2: Implement .get_frame_desc()
- Re: [net-next 3/3] net: phy: marvell-88q2xxx: Enable auto negotiation for mv88q2110
- Re: [net-next 2/2] net: phy: Fallback to C22 access if needed in phy_mii_ioctl()
- Re: [net-next 2/2] net: phy: Fallback to C22 access if needed in phy_mii_ioctl()
- Re: [net-next 3/3] net: phy: marvell-88q2xxx: Enable auto negotiation for mv88q2110
- [PATCH] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe()
- Re: [net-next 2/3] net: phy: marvell-88q2xxx: Make register writer function generic
- Re: [PATCH v6 1/3] hwmon: (isl28022) new driver for ISL28022 power monitor
- Re: [PATCH] arm64: dts: renesas: white-hawk-cpu: Move avb0 reset gpio to mdio node
- [PATCH 3/3] media: platform: rzg2l-cru: Add support to capture 8bit raw sRGB
- [PATCH 2/3] media: platform: rzg2l-cru: rzg2l-video: Retrieve virtual channel information
- [PATCH 1/3] media: platform: rzg2l-cru: rzg2l-csi2: Implement .get_frame_desc()
- [PATCH 0/3] media: platform: rzg2l-cru: CSI-2 and CRU enhancements
- Re: [PATCH -next RESEND 01/10] mtd: rawnand: arasan: Use for_each_child_of_node_scoped()
- Re: [PATCH -next RESEND 02/10] mtd: rawnand: cadence: Use for_each_child_of_node_scoped()
- Re: [PATCH -next RESEND 03/10] mtd: rawnand: pl353: Use for_each_child_of_node_scoped()
- Re: [PATCH -next RESEND 04/10] mtd: rawnand: marvell: drm/rockchip: Use for_each_child_of_node_scoped()
- Re: [PATCH -next RESEND 05/10] mtd: rawnand: rockchip: Use for_each_child_of_node_scoped()
- Re: [PATCH -next RESEND 06/10] mtd: rawnand: meson: Use for_each_child_of_node_scoped()
- Re: [PATCH -next RESEND 07/10] mtd: rawnand: mtk: Use for_each_child_of_node_scoped()
- Re: [PATCH -next RESEND 08/10] mtd: rawnand: renesas: Use for_each_child_of_node_scoped()
- Re: [PATCH -next RESEND 09/10] mtd: rawnand: stm32_fmc2: Use for_each_child_of_node_scoped()
- Re: [PATCH -next RESEND 10/10] mtd: rawnand: sunxi: Use for_each_child_of_node_scoped()
- Re: [PATCH] arm64: dts: renesas: white-hawk-cpu: Move avb0 reset gpio to mdio node
- [net-next 3/3] net: phy: marvell-88q2xxx: Enable auto negotiation for mv88q2110
- [net-next 1/3] net: phy: marvell-88q2xxx: Align soft reset for mv88q2110 and mv88q2220
- [net-next 2/3] net: phy: marvell-88q2xxx: Make register writer function generic
- [net-next 0/3] net: phy: marvell-88q2xxx: Enable auto negotiation for mv88q2110
- Re: [PATCH v6 3/3] hwmon: (isl28022) support shunt voltage for ISL28022 power monitor
- [net-next 2/2] net: phy: Fallback to C22 access if needed in phy_mii_ioctl()
- [net-next 1/2] net: phy: Expose the direct mdiobus access functions
- [net-next 0/2] net: phy: Fallback to C22 for PHY register read/write
- Re: [PATCH v15 00/32] Add i2c-mux and eeprom devices for Meta Yosemite 4
- From: Krzysztof Kozlowski
- Re: [PATCH v15 09/32] ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555
- From: Krzysztof Kozlowski
- Re: [PATCH v15 32/32] ARM: dts: aspeed: yosemite4: add ISL28022 support on 11
- From: Krzysztof Kozlowski
- Re: [PATCH v15 31/32] ARM: dts: aspeed: yosemite4: add GPIO I6
- From: Krzysztof Kozlowski
- Re: [PATCH v15 30/32] ARM: dts: aspeed: yosemite4: add SQ52205 support
- From: Krzysztof Kozlowski
- Re: [PATCH v15 29/32] ARM: dts: aspeed: yosemitet4: add RTQ6056 support on 11 (0x41).
- From: Krzysztof Kozlowski
- Re: [PATCH v15 28/32] ARM: dts: aspeed: yosemite4: fix GPIO linename typo
- From: Krzysztof Kozlowski
- Re: [PATCH v15 26/32] ARM: dts: aspeed: yosemite4: add MP5990 support
- From: Krzysztof Kozlowski
- Re: [PATCH v15 25/32] ARM: dts: aspeed: yosemite4: add RTQ6056 support
- From: Krzysztof Kozlowski
- Re: [PATCH v15 23/32] ARM: dts: aspeed: yosemite4: add fan led config
- Re: [PATCH v15 22/32] ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle
- Re: [PATCH v15 30/32] ARM: dts: aspeed: yosemite4: add SQ52205 support
- Re: [PATCH v15 08/32] ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible
- Re: [PATCH v6 3/3] hwmon: (isl28022) support shunt voltage for ISL28022 power monitor
- From: Krzysztof Kozlowski
- Re: [PATCH v6 2/3] dt-bindings: hwmon: add renesas,isl28022
- From: Krzysztof Kozlowski
- Re: [PATCH v3 07/12] arm64: dts: renesas: r9a08g045: Add VBATTB node
- Re: [PATCH v6 3/4] PCI: qcom: Add equalization settings for 16.0 GT/s
- RE: [PATCH v15 32/32] ARM: dts: aspeed: yosemite4: add ISL28022 support on 11
- From: Delphine_CC_Chiu/WYHQ/Wiwynn
- RE: [PATCH v6 1/3] hwmon: (isl28022) new driver for ISL28022 power monitor
- [PATCH v15 32/32] ARM: dts: aspeed: yosemite4: add ISL28022 support on 11
- [PATCH v15 31/32] ARM: dts: aspeed: yosemite4: add GPIO I6
- [PATCH v15 30/32] ARM: dts: aspeed: yosemite4: add SQ52205 support
- [PATCH v15 29/32] ARM: dts: aspeed: yosemitet4: add RTQ6056 support on 11 (0x41).
- [PATCH v15 28/32] ARM: dts: aspeed: yosemite4: fix GPIO linename typo
- [PATCH v15 27/32] ARM: dts: aspeed: yosemite4: Adjust ioexp bus and remove mctp driver
- [PATCH v15 26/32] ARM: dts: aspeed: yosemite4: add MP5990 support
- [PATCH v15 25/32] ARM: dts: aspeed: yosemite4: add RTQ6056 support
- [PATCH v15 24/32] ARM: dts: aspeed: yosemite4: add XDP710
- [PATCH v15 23/32] ARM: dts: aspeed: yosemite4: add fan led config
- [PATCH v15 22/32] ARM: dts: aspeed: yosemite4: Revise i2c duty-cycle
- [PATCH v15 21/32] ARM: dts: aspeed: yosemite4: support NIC eeprom
- [PATCH v15 20/32] ARM: dts: aspeed: yosemite4: support medusa board adc sensors
- RE: [PATCH v6 2/3] dt-bindings: hwmon: add renesas,isl28022
- [PATCH v15 19/32] ARM: dts: aspeed: yosemite4: support mux to cpld
- [PATCH v15 18/32] ARM: dts: aspeed: yosemite4: add mctp config for NIC
- [PATCH v15 17/32] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config
- [PATCH v15 16/32] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state
- [PATCH v15 15/32] ARM: dts: aspeed: yosemite4: Remove idle state setting for yosemite4 NIC connection
- [PATCH v15 14/32] ARM: dts: aspeed: yosemite4: Revise ina233 config for yosemite4 schematic change
- [PATCH v15 13/32] ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode for yosemite4 schematic change
- [PATCH v15 12/32] ARM: dts: aspeed: yosemite4: Remove temperature sensor for yosemite4 schematic change
- [PATCH v15 11/32] ARM: dts: aspeed: yosemite4: Add eeprom for yosemite4 use
- [PATCH v15 10/32] ARM: dts: aspeed: yosemite4: Add power sensor for power module reading
- [PATCH v15 09/32] ARM: dts: aspeed: yosemite4: Enable interrupt setting for pca9555
- [PATCH v15 08/32] ARM: dts: aspeed: yosemite4: Remove space for adm1272 compatible
- [PATCH v15 07/32] ARM: dts: aspeed: yosemite4: Add gpio pca9506
- [PATCH v15 06/32] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change
- [PATCH v15 05/32] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode
- [PATCH v15 04/32] ARM: dts: aspeed: yosemite4: Enable watchdog2
- [PATCH v15 03/32] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting
- [PATCH v15 01/32] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices
- [PATCH v15 02/32] ARM: dts: aspeed: yosemite4: Enable adc15
- [PATCH v15 00/32] Add i2c-mux and eeprom devices for Meta Yosemite 4
- [PATCH v6 3/3] hwmon: (isl28022) support shunt voltage for ISL28022 power monitor
- [PATCH v6 2/3] dt-bindings: hwmon: add renesas,isl28022
- [PATCH v6 1/3] hwmon: (isl28022) new driver for ISL28022 power monitor
- [PATCH v6 0/3] hwmon: (isl28022) new driver for ISL28022 power monitor
- Re: [PATCH v3 07/12] arm64: dts: renesas: r9a08g045: Add VBATTB node
- Re: [PATCH v6 3/4] PCI: qcom: Add equalization settings for 16.0 GT/s
- From: Manivannan Sadhasivam
- Re: [PATCH v6 3/4] PCI: qcom: Add equalization settings for 16.0 GT/s
- Re: [PATCH v6 1/4] PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
- Re: [PATCH v6 3/4] PCI: qcom: Add equalization settings for 16.0 GT/s
- From: Manivannan Sadhasivam
- Re: [GIT PULL] pinctrl: renesas: Updates for v6.12 (take two)
- Re: [PATCH v5 0/2] Add Watchdog Timer driver for Renesas RZ/V2H(P) SoC
- [PATCH] media: platform: rzg2l-cru: rzg2l-video: Fix the comment in rzg2l_cru_start_streaming_vq()
- [PATCH] media: platform: rzg2l-cru: rzg2l-video: Set AXI burst max length
- Re: [RFC PATCH 00/12] media: ov5645: Add support for streams
- Re: [RFC PATCH 00/12] media: ov5645: Add support for streams
- Re: [RFC PATCH 00/12] media: ov5645: Add support for streams
- Re: [RFC PATCH 00/12] media: ov5645: Add support for streams
- Re: [RFC PATCH 00/12] media: ov5645: Add support for streams
- Re: [RFC PATCH 00/12] media: ov5645: Add support for streams
- Re: [PATCH v6 1/4] PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
- [PATCH] media: dt-bindings: renesas,rzg2l-cru: Improve documentation
- Re: [PATCH v6 4/4] PCI: qcom: Add RX margining settings for 16.0 GT/s
- Re: [PATCH v6 3/4] PCI: qcom: Add equalization settings for 16.0 GT/s
- Re: [RFC PATCH 00/12] media: ov5645: Add support for streams
- Re: [PATCH v6 2/4] PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
- [geert-renesas-drivers:topic/overlays-v6.11-rc5] BUILD SUCCESS d82dbabc2e0aca4d21447e6604915b7d11198a4a
- Re: [net-next] net: phy: Check for read errors in SIOCGMIIREG
- From: patchwork-bot+netdevbpf
- [geert-renesas-drivers:topic/renesas-overlays] BUILD SUCCESS 8436b2ed18c4c1ccdf3fbe6487d39f381ef36c4e
- [RFC PATCH 12/12] media: i2c: ov5645: Add virtual channel support
- [RFC PATCH 11/12] media: i2c: ov5645: Report streams using frame descriptors
- [RFC PATCH 10/12] media: i2c: ov5645: Report internal routes to userspace
- [RFC PATCH 09/12] media: i2c: ov5645: Add internal image sink pad
- [RFC PATCH 08/12] media: i2c: ov5645: Switch to {enable,disable}_streams
- [RFC PATCH 07/12] media: i2c: ov5645: Use subdev active state
- [RFC PATCH 06/12] media: i2c: ov5645: Drop `power_lock` mutex
- [RFC PATCH 05/12] media: i2c: ov5645: Use v4l2_async_register_subdev_sensor()
- [RFC PATCH 04/12] media: i2c: ov5645: Use dev_err_probe instead of dev_err
- [RFC PATCH 03/12] media: i2c: ov5645: Enable runtime PM after v4l2_async_register_subdev()
- [RFC PATCH 02/12] media: i2c: ov5645: Use local `dev` pointer for subdev device assignment
- [RFC PATCH 01/12] media: i2c: ov5645: Add V4L2_SUBDEV_FL_HAS_EVENTS and subscribe hooks
- [RFC PATCH 00/12] media: ov5645: Add support for streams
- Re: [PATCH v6 4/4] PCI: qcom: Add RX margining settings for 16.0 GT/s
- From: Shashank Babu Chinta Venkata
- Re: [PATCH v6 3/4] PCI: qcom: Add equalization settings for 16.0 GT/s
- From: Shashank Babu Chinta Venkata
- Re: [PATCH v6 1/4] PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
- From: Manivannan Sadhasivam
- Re: [PATCH v6 4/4] PCI: qcom: Add RX margining settings for 16.0 GT/s
- From: Manivannan Sadhasivam
- Re: [PATCH v6 2/4] PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
- Re: [PATCH v6 1/4] PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
- Re: [PATCH v6 3/4] PCI: qcom: Add equalization settings for 16.0 GT/s
- From: Manivannan Sadhasivam
- Re: [PATCH v6 2/4] PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
- From: Manivannan Sadhasivam
- [PATCH v2] media: rcar-vin: Add support for RAW10
- Re: [PATCH 1/3] dt-bindings: PCI: hisilicon,kirin-pcie: add top-level constraints
- From: Krzysztof Wilczyński
- [PATCH 3/4] pmdomain: core: Move mode_status_str()
- [PATCH 0/4] pmdomain: core: Debug summary improvements
- [PATCH 4/4] pmdomain: core: Reduce debug summary table width
- [PATCH 2/4] pmdomain: core: Fix "managed by" alignment in debug summary
- [PATCH 1/4] pmdomain: core: Harden inter-column space in debug summary
- Re: [PATCH v2 2/2] media: staging: max96712: Add support for MAX96724
- Re: [PATCH v3 07/12] arm64: dts: renesas: r9a08g045: Add VBATTB node
- [geert-renesas-drivers:master] BUILD SUCCESS a7ce5524173f7e57ab276b4087904705c58dffc9
- Re: [PATCH v6 0/4] PCI: qcom: Add 16.0 GT/s equalization and margining settings
- Re: [PATCH v6 4/4] PCI: qcom: Add RX margining settings for 16.0 GT/s
- Re: [PATCH v6 3/4] PCI: qcom: Add equalization settings for 16.0 GT/s
- Re: [PATCH v6 2/4] PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
- Re: [PATCH v6 1/4] PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
- Re: [net-next] net: phy: Check for read errors in SIOCGMIIREG
- Re: [PATCH 0/2] arm64: dts: renesas: r8a779h0: Enable PCIe Host
- [PATCH v6 3/4] PCI: qcom: Add equalization settings for 16.0 GT/s
- From: Manivannan Sadhasivam via B4 Relay
- [PATCH v6 4/4] PCI: qcom: Add RX margining settings for 16.0 GT/s
- From: Manivannan Sadhasivam via B4 Relay
- [PATCH v6 2/4] PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
- From: Manivannan Sadhasivam via B4 Relay
- [PATCH v6 1/4] PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
- From: Manivannan Sadhasivam via B4 Relay
- [PATCH v6 0/4] PCI: qcom: Add 16.0 GT/s equalization and margining settings
- From: Manivannan Sadhasivam via B4 Relay
- RE: [net-next] net: ethernet: rtsn: Add MDIO read/write support for C45
- RE: [net-next] net: phy: Check for read errors in SIOCGMIIREG
- [PATCH 0/2] arm64: dts: renesas: r8a779h0: Enable PCIe Host
- [PATCH 1/2] arm64: dts: renesas: r8a779h0: Add PCIe Host and Endpoint nodes
- [PATCH 2/2] arm64: dts: renesas: r8a779h0: gray-hawk-single: Enable PCIe Host
- [geert-renesas-devel:master] BUILD SUCCESS eb506fd73109d2792435a811247040b2d00f379e
- [geert-renesas-devel:next] BUILD SUCCESS 5379c9e0a6ad7d4690e7f496c48c0d44ebb30dd9
- [geert-renesas-devel:renesas-dts-for-v6.12] BUILD SUCCESS cc41aa93bbafdfe4c4c9026d307adbb89c1d80fa
- Re: [GIT PULL] clk: renesas: Updates for v6.12 (take two)
- Re: [PATCH v3 07/12] arm64: dts: renesas: r9a08g045: Add VBATTB node
- Re: [net-next] net: ethernet: rtsn: Add MDIO read/write support for C45
- Re: [net-next] net: phy: Check for read errors in SIOCGMIIREG
- Re: [net-next] net: phy: Check for read errors in SIOCGMIIREG
- Re: [PATCH v3 06/12] rtc: renesas-rtca3: Add driver for RTCA-3 available on Renesas RZ/G3S SoC
- [net-next] net: ethernet: rtsn: Add MDIO read/write support for C45
- [net-next] net: phy: Check for read errors in SIOCGMIIREG
- Re: [PATCH v3 06/12] rtc: renesas-rtca3: Add driver for RTCA-3 available on Renesas RZ/G3S SoC
- RE: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- [GIT PULL] pinctrl: renesas: Updates for v6.12 (take two)
- [GIT PULL] Renesas DTS updates for v6.12 (take two)
- [GIT PULL] clk: renesas: Updates for v6.12 (take two)
- Re: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- Re: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- RE: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- renesas/master baseline: 35 runs, 1 regressions (renesas-devel-2024-09-03-v6.11-rc6)
- renesas/master baseline-nfs: 17 runs, 1 regressions (renesas-devel-2024-09-03-v6.11-rc6)
- Re: [PATCH] drm: renesas: shmobile: Add drm_panic support
- RE: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- Re: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- RE: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- Re: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- renesas-drivers-2024-09-03-v6.11-rc6
- RE: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- Re: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- RE: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- renesas/master ltp-ipc: 5 runs, 1 regressions (renesas-devel-2024-09-03-v6.11-rc6)
- Re: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- Re: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- Re: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- RE: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- Re: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- Re: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- [geert-renesas-drivers:renesas-clk] BUILD SUCCESS 3aeccbe08171b79f82fb802393a6324c7b732669
- Patchwork summary for: linux-renesas-soc
- From: patchwork-bot+linux-renesas-soc
- Re: [PATCH v5 0/3] drm: fix two issues related to HDMI Connector implementation
- RE: [PATCH v3 01/12] dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
- [no subject]
- Re: [PATCH v3 01/12] dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
- Re: [PATCH v3 01/12] dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
- RE: [PATCH v3 01/12] dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
- [no subject]
- Re: [PATCH v3 06/12] rtc: renesas-rtca3: Add driver for RTCA-3 available on Renesas RZ/G3S SoC
- RE: [PATCH v3 01/12] dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
- Re: [PATCH v3 01/12] dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
- RE: [PATCH v3 01/12] dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
- Re: [PATCH v3 01/12] dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
- RE: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- RE: [PATCH v3 01/12] dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
- [geert-renesas-devel:next] BUILD SUCCESS e22d8075c0bade5fee1820cc1d28d7d9c7f9172e
- [geert-renesas-devel:master] BUILD SUCCESS 284f4e0d3f0ba80fe5eb5563807d39c6eec0432f
- [geert-renesas-devel:renesas-dts-for-v6.12] BUILD SUCCESS 686bba2a17f43ddc68596a88850e6407c4829d67
- [geert-renesas-devel:renesas-r9a09g057-dt-binding-defs] BUILD SUCCESS 15bba65c1927ec8fde95611f316146d0743f16d5
- [geert-renesas-drivers:renesas-pinctrl] BUILD SUCCESS 1325820dd085809645bdd89a2fd408a05b4a5492
- [PATCH v5 3/3] drm/bridge-connector: reset the HDMI connector state
- [PATCH v5 2/3] drm/bridge-connector: move to DRM_DISPLAY_HELPER module
- [PATCH v5 1/3] drm/display: stop depending on DRM_DISPLAY_HELPER
- [PATCH v5 0/3] drm: fix two issues related to HDMI Connector implementation
- Re: [PATCH v3 06/12] rtc: renesas-rtca3: Add driver for RTCA-3 available on Renesas RZ/G3S SoC
- renesas/master baseline: 33 runs, 1 regressions (renesas-devel-2024-09-02-v6.11-rc6)
- renesas/master baseline-nfs: 16 runs, 1 regressions (renesas-devel-2024-09-02-v6.11-rc6)
- Re: [PATCH v3 01/12] dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
- Re: [PATCH v3 06/12] rtc: renesas-rtca3: Add driver for RTCA-3 available on Renesas RZ/G3S SoC
- [PATCH v3 4/4] watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler
- [PATCH v3 3/4] clk: renesas: r9a08g045: Mark the watchdog and always-on PM domains as IRQ safe
- [PATCH v3 2/4] clk: renesas: rzg2l-cpg: Use GENPD_FLAG_* flags instead of local ones
- [PATCH v3 1/4] clk: renesas: rzg2l-cpg: Move PM domain power on in rzg2l_cpg_pd_setup()
- [PATCH v3 0/4] watchdog: rzg2l_wdt: Enable properly the watchdog clocks and power domain
- Re: [RFC PATCH 1/2] dt-bindings: i2c: renesas,rcar-i2c: document SMBusAlert usage
- Re: [PATCH][next] thermal/drivers/renesas: Remove trailing space after \n newline
- RE: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- Re: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- Patchwork summary for: linux-renesas-soc
- From: patchwork-bot+linux-renesas-soc
- Re: [RFC PATCH 1/2] dt-bindings: i2c: renesas,rcar-i2c: document SMBusAlert usage
- RE: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- Re: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- RE: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- [no subject]
- [no subject]
- Re: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- Re: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- RE: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- [PATCH v4 1/2] arm64: dts: renesas: rzg2ul-smarc-som: Enable serial NOR flash
- [PATCH v4 0/2] Enable serial NOR flash on RZ/G2UL SMARC EVK
- [PATCH v4 2/2] arm64: dts: renesas: rz{g2l,g2lc}-smarc-som: Update partition table for spi-nor flash
- RE: [PATCH v2 RESEND 2/3] arm64: dts: renesas: rzg2ul-smarc-som: Enable serial NOR flash
- Re: [PATCH][next] PCI: rcar-gen4: make read-only const array check_addr static
- From: Krzysztof Wilczyński
- Re: [PATCH][next] thermal/drivers/renesas: Remove trailing space after \n newline
- Re: [PATCH 0/2] PCI: rcar-gen4: Add R-Car V4M support
- From: Krzysztof Wilczyński
- [PATCH][next] thermal/drivers/renesas: Remove trailing space after \n newline
- Re: [RFC PATCH 1/2] dt-bindings: i2c: renesas,rcar-i2c: document SMBusAlert usage
- Re: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- Re: (subset) [PATCH v2 RESEND 1/3] memory: renesas-rpc-if: Use Hi-Z state as the default setting for IOVF pins
- From: Krzysztof Kozlowski
- RE: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- Re: [PATCH v3 06/12] rtc: renesas-rtca3: Add driver for RTCA-3 available on Renesas RZ/G3S SoC
- Re: [PATCH v3 01/12] dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
- [PATCH v2 8/8] media: rcar-csi2: Add support for R-Car V4M
- [PATCH v2 7/8] media: rcar-csi2: Add documentation for PHY_EN and PHY_MODE registers
- [PATCH v2 6/8] media: rcar-csi2: Move PHTW write helpers
- [PATCH v2 5/8] media: rcar-csi2: Add helper to lookup mbps settings
- [PATCH v2 4/8] media: rcar-csi2: Abstract PHTW and PHYPLL register offsets
- [PATCH v2 3/8] media: rcar-csi2: Allow writing any code and data value to PHTW
- [PATCH v2 2/8] media: rcar-csi2: Correct field size for PHTW writes
- [PATCH v2 1/8] dt-bindings: media: renesas,csi2: Add binding for V4M
- [PATCH v2 0/8] media: rcar-csi2: Add support for V4M
- [PATCH v2 RESEND 3/3] arm64: dts: renesas: rz{g2l,g2lc}-smarc-som: Update partition table for spi-nor flash
- [PATCH v2 RESEND 1/3] memory: renesas-rpc-if: Use Hi-Z state as the default setting for IOVF pins
- [PATCH v2 RESEND 0/3] Enable serial NOR flash on RZ/G2UL SMARC EVK
- [PATCH v2 RESEND 2/3] arm64: dts: renesas: rzg2ul-smarc-som: Enable serial NOR flash
- Re: [PATCH v3 02/12] dt-bindings: clock: r9a08g045-vbattb: Add clock IDs for the VBATTB controller
- Re: [PATCH v3 01/12] dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
- Re: [PATCH v3 1/7] dt-bindings: fuse: Move renesas,rcar-{efuse,otp} to nvmem
- Re: [PATCH v3 05/12] dt-bindings: rtc: renesas,rzg3s-rtc: Document the Renesas RTCA-3 IP
- Re: [PATCH v2 1/3] clk: renesas: rzg2l-cpg: Use GENPD_FLAG_* flags instead of local ones
- Re: [PATCH v2 1/3] clk: renesas: rzg2l-cpg: Use GENPD_FLAG_* flags instead of local ones
- Re: [PATCH v2 1/3] clk: renesas: rzg2l-cpg: Use GENPD_FLAG_* flags instead of local ones
- [PATCH v3 12/12] arm64: defconfig: Enable Renesas RTCA-3 flag
- [PATCH v3 11/12] arm64: defconfig: Enable VBATTB clock
- [PATCH v3 10/12] arm64: dts: renesas: rzg3s-smarc-som: Enable RTC
- [PATCH v3 09/12] arm64: dts: renesas: rzg3s-smarc-som: Enable VBATTB
- [PATCH v3 08/12] arm64: dts: renesas: r9a08g045: Add RTC node
- [PATCH v3 06/12] rtc: renesas-rtca3: Add driver for RTCA-3 available on Renesas RZ/G3S SoC
- [PATCH v3 07/12] arm64: dts: renesas: r9a08g045: Add VBATTB node
- [PATCH v3 05/12] dt-bindings: rtc: renesas,rzg3s-rtc: Document the Renesas RTCA-3 IP
- [PATCH v3 04/12] clk: renesas: clk-vbattb: Add VBATTB clock driver
- [PATCH v3 03/12] clk: linux/clk-provider.h: Add devm_clk_hw_register_gate_parent_hw()
- [PATCH v3 02/12] dt-bindings: clock: r9a08g045-vbattb: Add clock IDs for the VBATTB controller
- [PATCH v3 01/12] dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
- [PATCH v3 00/12] Add RTC support for the Renesas RZ/G3S SoC
- RE: [PATCH 1/3] memory: renesas-rpc-if: Use Hi-Z state as the default setting for IOVF pins
- Re: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- Re: [PATCH 1/3] memory: renesas-rpc-if: Use Hi-Z state as the default setting for IOVF pins
- From: Krzysztof Kozlowski
- Re: [PATCH 1/3] memory: renesas-rpc-if: Use Hi-Z state as the default setting for IOVF pins
- From: Krzysztof Kozlowski
- Re: [PATCH v3] dt-bindings: can: renesas,rcar-canfd: Document R-Car V4M support
- Re: [PATCH v3] dt-bindings: can: renesas,rcar-canfd: Document R-Car V4M support
- Re: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- Re: [PATCH v4 1/9] dt-bindings: soc: renesas: Document RZ/V2H EVK board
- From: Krzysztof Kozlowski
- Re: [PATCH v4 1/9] dt-bindings: soc: renesas: Document RZ/V2H EVK board
- From: Krzysztof Kozlowski
- Re: [PATCH v2 2/2] pinctrl: renesas: rzg2l: Move pinconf_to_config_argument() call outside of switch cases
- Re: [PATCH v2 1/2] pinctrl: renesas: rzg2l: Introduce single macro for digital noise filter configuration
- Re: [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
- Re: [PATCH v3 3/5] media: staging: max96712: Move link frequency setting to device struct
- Re: [PATCH v3 4/5] media: staging: max96712: Document the DEBUG_EXTRA register
- Re: (subset) [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC
[Index of Archives]
[Linux Samsung SOC]
[Linux Wireless]
[Linux Bluetooth]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Linux ATA RAID]
[Bugtraq]