[PATCH net-next v2 3/5] net: renesas: rswitch: align mdio C45 operations with datasheet

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Per rswitch datasheet, software can know that mdio operation completed
either by polling MPSM.PSME bit, or via interrupt.

Instead, the driver currently polls for interrupt status bit. Although
this still provides correct result, it requires additional register
operations to clean the interrupt status bits, and generally looks wrong.

Fix it to poll MPSM.PSME bit, as the datasheet suggests.

Signed-off-by: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>
---
 drivers/net/ethernet/renesas/rswitch.c | 12 +++---------
 drivers/net/ethernet/renesas/rswitch.h |  6 ------
 2 files changed, 3 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/renesas/rswitch.c b/drivers/net/ethernet/renesas/rswitch.c
index e1541a206687..6e3f162ae3b3 100644
--- a/drivers/net/ethernet/renesas/rswitch.c
+++ b/drivers/net/ethernet/renesas/rswitch.c
@@ -1205,32 +1205,26 @@ static int rswitch_etha_set_access(struct rswitch_etha *etha, bool read,
 	if (devad == 0xffffffff)
 		return -ENODEV;
 
-	writel(MMIS1_CLEAR_FLAGS, etha->addr + MMIS1);
-
 	val = MPSM_PSME | MPSM_MFF_C45;
 	iowrite32((regad << 16) | (devad << 8) | (phyad << 3) | val, etha->addr + MPSM);
 
-	ret = rswitch_reg_wait(etha->addr, MMIS1, MMIS1_PAACS, MMIS1_PAACS);
+	ret = rswitch_reg_wait(etha->addr, MPSM, MPSM_PSME, 0);
 	if (ret)
 		return ret;
 
-	rswitch_modify(etha->addr, MMIS1, MMIS1_PAACS, MMIS1_PAACS);
-
 	if (read) {
 		writel((pop << 13) | (devad << 8) | (phyad << 3) | val, etha->addr + MPSM);
 
-		ret = rswitch_reg_wait(etha->addr, MMIS1, MMIS1_PRACS, MMIS1_PRACS);
+		ret = rswitch_reg_wait(etha->addr, MPSM, MPSM_PSME, 0);
 		if (ret)
 			return ret;
 
 		ret = (ioread32(etha->addr + MPSM) & MPSM_PRD_MASK) >> 16;
-
-		rswitch_modify(etha->addr, MMIS1, MMIS1_PRACS, MMIS1_PRACS);
 	} else {
 		iowrite32((data << 16) | (pop << 13) | (devad << 8) | (phyad << 3) | val,
 			  etha->addr + MPSM);
 
-		ret = rswitch_reg_wait(etha->addr, MMIS1, MMIS1_PWACS, MMIS1_PWACS);
+		ret = rswitch_reg_wait(etha->addr, MPSM, MPSM_PSME, 0);
 	}
 
 	return ret;
diff --git a/drivers/net/ethernet/renesas/rswitch.h b/drivers/net/ethernet/renesas/rswitch.h
index 78c0325cdf30..2cb66f3f4716 100644
--- a/drivers/net/ethernet/renesas/rswitch.h
+++ b/drivers/net/ethernet/renesas/rswitch.h
@@ -743,12 +743,6 @@ enum rswitch_etha_mode {
 #define MPSM_PRD_SHIFT		16
 #define MPSM_PRD_MASK		GENMASK(31, MPSM_PRD_SHIFT)
 
-/* Completion flags */
-#define MMIS1_PAACS             BIT(2) /* Address */
-#define MMIS1_PWACS             BIT(1) /* Write */
-#define MMIS1_PRACS             BIT(0) /* Read */
-#define MMIS1_CLEAR_FLAGS       0xf
-
 #define MLVC_PLV		BIT(16)
 
 /* GWCA */
-- 
2.39.5





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux