Linux Renesas SOC

• Thread Index

• Re: [PATCH 0/4] kms++util: Provide validation helpers
  • From: Tomi Valkeinen
• Re: [PATCH 4/4] kms++util: Add frame compare functionality
  • From: Tomi Valkeinen
• Re: [PATCH] v4l: rcar-csi2: Don't bail out from probe on no ep
  • From: Hans Verkuil
• [PATCH] [kms-tests] tests: Add colorkey test
  • From: Laurent Pinchart
• Re: [PATCH 3/4] kms++util: Add verification module
  • From: Tomi Valkeinen
• Re: [PATCH v2 00/22] mmc: tmio: various fixes and cleanups
  • From: Ulf Hansson
• Re: arm64: unhandled level 0 translation fault
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC v2 06/15] rcar-csi2: use frame description information when propagating .s_stream()
  • From: Sakari Ailus
• Re: [PATCH/RFC v2 05/15] rcar-csi2: count usage for each source pad
  • From: Sakari Ailus
• Re: [PATCH/RFC v2 03/15] rcar-vin: use the pad and stream aware s_stream
  • From: Sakari Ailus
• Re: [PATCH/RFC v2 02/15] rcar-vin: use pad as the starting point for a pipeline
  • From: Sakari Ailus
• Re: [PATCH/RFC v2 01/15] v4l2-subdev.h: add pad and stream aware s_stream
  • From: Sakari Ailus
• Re: arm64: unhandled level 0 translation fault
  • From: Dave Martin
• Re: [PATCH v2 00/22] mmc: tmio: various fixes and cleanups
  • From: Wolfram Sang
• Re: [PATCH 0/9] ARM: dts: gen2: add IP core switcher for all busses
  • From: Wolfram Sang
• RE: [PATCH 1/6] ARM: shmobile: defconfig: Enable PWM
  • From: Fabrizio Castro
• Re: [PATCH] phy: rcar-gen3-usb2: add dependency on USB
  • From: Vladimir Murzin
• RE: [PATCH] phy: rcar-gen3-usb2: add dependency on USB
  • From: Yoshihiro Shimoda
• [PATCH] phy: rcar-gen3-usb2: add dependency on USB
  • From: Vladimir Murzin
• Re: [PATCH 2/9] v4l: vsp1: Print the correct blending unit name in debug messages
  • From: Kieran Bingham
• [GIT PULL FOR renesas-drivers] Display CRC calculation support
  • From: Laurent Pinchart
• Re: [PATCH 1/9] v4l: vsp1: Fix display stalls when requesting too many inputs
  • From: Kieran Bingham
• Re: [PATCH v2 00/22] mmc: tmio: various fixes and cleanups
  • From: Masahiro Yamada
• Re: [PATCH 1/6] ARM: shmobile: defconfig: Enable PWM
  • From: Geert Uytterhoeven
• [git pull] pinctrl: sh-pfc: Updates for v4.16
  • From: Geert Uytterhoeven
• [git pull] clk: renesas: Updates for v4.16
  • From: Geert Uytterhoeven
• Re: [PATCH] mmc: renesas_sdhi: Add MODULE_LICENSE
  • From: Ulf Hansson
• Re: [PATCH v2 00/22] mmc: tmio: various fixes and cleanups
  • From: Ulf Hansson
• Re: [PATCH 1/6] ARM: shmobile: defconfig: Enable PWM
  • From: Geert Uytterhoeven
• Re: [renesas-drivers:topic/renesas-overlays 23/92] drivers/of/dynamic.c:1141:13: sparse: incorrect type in assignment (different base types)
  • From: Geert Uytterhoeven
• Re: [PATCH v3 2/2] drm: rcar-du: calculate DPLLCR to be more small jitter
  • From: Geert Uytterhoeven
• Re: [PATCH v3 2/2] drm: rcar-du: calculate DPLLCR to be more small jitter
  • From: Kuninori Morimoto
• Re: [RFC PATCH renesas-drivers] of: overlay: overlay_changeset_release() can be static
  • From: Geert Uytterhoeven
• Re: [RFC PATCH renesas-drivers] [RFC] of: dead_aliases_lookup can be static
  • From: Geert Uytterhoeven
• Re: [PATCH v3 2/2] drm: rcar-du: calculate DPLLCR to be more small jitter
  • From: Geert Uytterhoeven
• [PATCH v2 4/6] phy: renesas: rcar-gen3-usb2: use prefix "has_otg_pins_" for dedicated pins handling
  • From: Yoshihiro Shimoda
• [PATCH v2 5/6] phy: renesas: rcar-gen3-usb2: add rcar_gen3_role_swap_ops
  • From: Yoshihiro Shimoda
• [PATCH v2 6/6] phy: renesas: rcar-gen3-usb2: add gpio handling
  • From: Yoshihiro Shimoda
• [PATCH v2 0/6] phy: renesas: rcar-gen3-usb2: add gpio handling for R-Car D3
  • From: Yoshihiro Shimoda
• [PATCH v2 1/6] phy: renesas: rcar-gen3-usb2: call INIT_WORK() anyway
  • From: Yoshihiro Shimoda
• [PATCH v2 2/6] phy: renesas: rcar-gen3-usb2: unify OBINTEN handling
  • From: Yoshihiro Shimoda
• [PATCH v2 3/6] phy: renesas: rcar-gen3-usb2: change the function name to set_vbus_ctrl()
  • From: Yoshihiro Shimoda
• [PATCH v3 2/2] drm: rcar-du: calculate DPLLCR to be more small jitter
  • From: Kuninori Morimoto
• [PATCH v3 1/2] drm: rcar-du: use 1000 to avoid misunderstanding in rcar_du_dpll_divider()
  • From: Kuninori Morimoto
• [PATCH v3 0/2] drm: rcar-du: calculate DPLLCR to be more small jitter
  • From: Kuninori Morimoto
• Re: [PATCH v2] drm: rcar-du: calculate DPLLCR to be more small jitter
  • From: Kuninori Morimoto
• [renesas-drivers:topic/renesas-overlays 30/92] drivers/of/base.c:1571:1: sparse: symbol 'dead_aliases_lookup' was not declared. Should it be static?
  • From: kbuild test robot
• [RFC PATCH renesas-drivers] [RFC] of: dead_aliases_lookup can be static
  • From: kbuild test robot
• Re: [PATCH/RFC v2 14/15] adv748x: csi2: add get_routing support
  • From: Kieran Bingham
• Re: [PATCH/RFC v2 13/15] adv748x: csi2: only allow formats on sink pads
  • From: Kieran Bingham
• Re: [PATCH/RFC v2 12/15] adv748x: csi2: switch to pad and stream aware s_stream
  • From: Kieran Bingham
• Re: [PATCH/RFC v2 15/15] adv748x: afe: add routing support
  • From: Kieran Bingham
• Re: [PATCH/RFC v2 15/15] adv748x: afe: add routing support
  • From: Kieran Bingham
• [PATCH 8/9] ARM: dts: gose: use demuxer for I2C2
  • From: Wolfram Sang
• [PATCH 9/9] ARM: dts: gose: use demuxer for I2C4
  • From: Wolfram Sang
• [PATCH 7/9] ARM: dts: silk: use demuxer for I2C1
  • From: Wolfram Sang
• [PATCH 6/9] ARM: dts: alt: use demuxer for I2C1
  • From: Wolfram Sang
• [PATCH 4/9] ARM: dts: koelsch: use demuxer for I2C4
  • From: Wolfram Sang
• [PATCH 5/9] ARM: dts: porter: use demuxer for I2C2
  • From: Wolfram Sang
• [PATCH 2/9] ARM: dts: lager: use demuxer for IIC3/I2C3
  • From: Wolfram Sang
• [PATCH 1/9] ARM: dts: lager: use demuxer for IIC2/I2C2
  • From: Wolfram Sang
• [PATCH 3/9] ARM: dts: koelsch: use demuxer for I2C2
  • From: Wolfram Sang
• [PATCH 0/9] ARM: dts: gen2: add IP core switcher for all busses
  • From: Wolfram Sang
• Re: [PATCH/RFC v2 10/15] adv748x: csi2: add translation from pixelcode to CSI-2 datatype
  • From: Kieran Bingham
• Re: [PATCH/RFC v2 09/15] adv748x: csi2: add module param for virtual channel
  • From: Kieran Bingham
• [renesas-drivers:topic/renesas-overlays 23/92] drivers/of/dynamic.c:1141:13: sparse: incorrect type in assignment (different base types)
  • From: kbuild test robot
• [RFC PATCH renesas-drivers] of: overlay: overlay_changeset_release() can be static
  • From: kbuild test robot
• [renesas-drivers:topic/renesas-overlays 10/92] drivers/of/overlay.c:657:6: sparse: symbol 'overlay_changeset_release' was not declared. Should it be static?
  • From: kbuild test robot
• [RFC 0/2] v4l2-ctl: add ROUTING get and set options
  • From: Niklas Söderlund
• [RFC 2/2] v4l2-ctl: add ROUTING get and set options
  • From: Niklas Söderlund
• [RFC 1/2] Synchronize with the Kernel headers for routing operations
  • From: Niklas Söderlund
• [PATCH/RFC v2 05/15] rcar-csi2: count usage for each source pad
  • From: Niklas Söderlund
• [PATCH/RFC v2 06/15] rcar-csi2: use frame description information when propagating .s_stream()
  • From: Niklas Söderlund
• [PATCH/RFC v2 03/15] rcar-vin: use the pad and stream aware s_stream
  • From: Niklas Söderlund
• [PATCH/RFC v2 07/15] rcar-csi2: use frame description information to configure CSI-2 bus
  • From: Niklas Söderlund
• [PATCH/RFC v2 08/15] rcar-csi2: add get_routing support
  • From: Niklas Söderlund
• [PATCH/RFC v2 11/15] adv748x: csi2: implement get_frame_desc
  • From: Niklas Söderlund
• [PATCH/RFC v2 12/15] adv748x: csi2: switch to pad and stream aware s_stream
  • From: Niklas Söderlund
• [PATCH/RFC v2 13/15] adv748x: csi2: only allow formats on sink pads
  • From: Niklas Söderlund
• [PATCH/RFC v2 14/15] adv748x: csi2: add get_routing support
  • From: Niklas Söderlund
• [PATCH/RFC v2 09/15] adv748x: csi2: add module param for virtual channel
  • From: Niklas Söderlund
• [PATCH/RFC v2 15/15] adv748x: afe: add routing support
  • From: Niklas Söderlund
• [PATCH/RFC v2 10/15] adv748x: csi2: add translation from pixelcode to CSI-2 datatype
  • From: Niklas Söderlund
• [PATCH/RFC v2 04/15] rcar-csi2: switch to pad and stream aware s_stream
  • From: Niklas Söderlund
• [PATCH/RFC v2 00/15] Add multiplexed pad streaming support
  • From: Niklas Söderlund
• [PATCH/RFC v2 02/15] rcar-vin: use pad as the starting point for a pipeline
  • From: Niklas Söderlund
• [PATCH/RFC v2 01/15] v4l2-subdev.h: add pad and stream aware s_stream
  • From: Niklas Söderlund
• Re: arm64: unhandled level 0 translation fault
  • From: Geert Uytterhoeven
• Re: [PATCH v9 07/28] rcar-vin: change name of video device
  • From: Laurent Pinchart
• Re: [PATCH v2 2/3] clk: renesas: cpg-mssr: Keep wakeup sources active during system suspend
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/3] clk: renesas: mstp: Keep wakeup sources active during system suspend
  • From: Geert Uytterhoeven
• Re: arm64: unhandled level 0 translation fault
  • From: Dave P Martin
• Re: arm64: unhandled level 0 translation fault
  • From: Will Deacon
• Re: arm64: unhandled level 0 translation fault
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/3] PM / core: Add IN_BAND_WAKEUP driver flag
  • From: Geert Uytterhoeven
• Re: [PATCH v9 07/28] rcar-vin: change name of video device
  • From: Sakari Ailus
• Re: [PATCH v2 2/3] PM / core: Add IN_BAND_WAKEUP driver flag
  • From: Ulf Hansson
• Re: [PATCH v2 3/3] soc: renesas: rcar-sysc: Keep wakeup sources active during system suspend
  • From: Ulf Hansson
• Re: [PATCH v2 2/3] clk: renesas: cpg-mssr: Keep wakeup sources active during system suspend
  • From: Ulf Hansson
• Re: [PATCH v2 1/3] clk: renesas: mstp: Keep wakeup sources active during system suspend
  • From: Ulf Hansson
• Re: [PATCH/RFC 1/2] v4l: v4l2-dev: Add infrastructure to protect device unplug race
  • From: Sakari Ailus
• Applied "spi: sh-msiof: Avoid writing to registers from spi_master.setup()" to the spi tree
  • From: Mark Brown
• Applied "spi: sh-msiof: Extend support to 3 native chip selects" to the spi tree
  • From: Mark Brown
• Applied "spi: sh-msiof: Implement cs-gpios configuration" to the spi tree
  • From: Mark Brown
• Applied "spi: sh-msiof: Document hardware limitations related to chip selects" to the spi tree
  • From: Mark Brown
• Re: [PATCH 4/4] spi: sh-msiof: Document hardware limitations related to chip selects
  • From: Mark Brown
• [PATCH 4/4] ARM: dts: r8a7745: Add TPU support
  • From: Fabrizio Castro
• [PATCH 3/4] pinctrl: sh-pfc: r8a7794: Add tpu groups and function
  • From: Fabrizio Castro
• [PATCH 2/4] ARM: dts: r8a7745: Add PWM SoC support
  • From: Fabrizio Castro
• [PATCH 1/4] pinctrl: sh-pfc: r8a7794: Add PWM[0123456] support
  • From: Fabrizio Castro
• [PATCH 0/4] Add PWM and TPU support to r8a7745
  • From: Fabrizio Castro
• [PATCH 6/6] ARM: dts: r8a7743: Add TPU support
  • From: Fabrizio Castro
• [PATCH 5/6] pinctrl: sh-pfc: r8a7791: Add tpu groups and function
  • From: Fabrizio Castro
• [PATCH 4/6] dt-bindings: pwm: renesas-tpu: Document r8a774[35] support
  • From: Fabrizio Castro
• [PATCH 3/6] ARM: dts: r8a7743: Add PWM SoC support
  • From: Fabrizio Castro
• [PATCH 2/6] dt-bindings: pwm: rcar: Document r8a774[35] PWM bindings
  • From: Fabrizio Castro
• [PATCH 1/6] ARM: shmobile: defconfig: Enable PWM
  • From: Fabrizio Castro
• [PATCH 0/6] Add PWM and TPU support to r8a7743
  • From: Fabrizio Castro
• Re: [PATCH v2 2/3] PM / core: Add IN_BAND_WAKEUP driver flag
  • From: Geert Uytterhoeven
• Re: [PATCH 4/4] kms++util: Add frame compare functionality
  • From: Kieran Bingham
• Re: [PATCH 3/3] ARM: dts: r8a7793: Correct critical CPU temperature
  • From: Geert Uytterhoeven
• Re: [PATCH 2/3] ARM: dts: r8a7791: Correct critical CPU temperature
  • From: Geert Uytterhoeven
• Re: [PATCH 1/3] ARM: dts: r8a7790: Correct critical CPU temperature
  • From: Geert Uytterhoeven
• RE: [PATCH 2/5] phy: renesas: rcar-gen3-usb2: unify OBINTEN handling
  • From: Yoshihiro Shimoda
• RE: [PATCH 5/5] phy: renesas: rcar-gen3-usb2: add gpio handling
  • From: Yoshihiro Shimoda
• [PATCH 3/3] ARM: dts: r8a7793: Correct critical CPU temperature
  • From: Chris Paterson
• [PATCH 2/3] ARM: dts: r8a7791: Correct critical CPU temperature
  • From: Chris Paterson
• [PATCH 1/3] ARM: dts: r8a7790: Correct critical CPU temperature
  • From: Chris Paterson
• [PATCH 0/3] Correct R-Car Gen2 critical CPU temperature
  • From: Chris Paterson
• Re: [PATCH 4/4] kms++util: Add frame compare functionality
  • From: Geert Uytterhoeven
• Re: [PATCH v2] drm: rcar-du: calculate DPLLCR to be more small jitter
  • From: Geert Uytterhoeven
• Re: [PATCH v2] drm: rcar-du: calculate DPLLCR to be more small jitter
  • From: Laurent Pinchart
• Re: [PATCH v2] drm: rcar-du: calculate DPLLCR to be more small jitter
  • From: Kuninori Morimoto
• Re: [RFC PATCH 1/3] kms-tests: Provide .gitignore
  • From: Kieran Bingham
• [RFC PATCH 3/3] tests: Add a DU->VIN loopback test
  • From: Kieran Bingham
• [RFC PATCH 2/3] rcar_vin: Provide VIN configuration helpers
  • From: Kieran Bingham
• [RFC PATCH 1/3] kms-tests: Provide .gitignore
  • From: Kieran Bingham
• [RFC PATCH 0/3] [RFC] Video HDMI Loop-back Test
  • From: Kieran Bingham
• Re: [PATCH] kmstest.py: Update to th latest kmsxx Python bindings
  • From: Kieran Bingham
• Re: [PATCH 0/4] kms++util: Provide validation helpers
  • From: Kieran Bingham
• [PATCH 4/4] kms++util: Add frame compare functionality
  • From: Kieran Bingham
• [PATCH 3/4] kms++util: Add verification module
  • From: Kieran Bingham
• [PATCH 2/4] py: pyvid: Provide stream_off binding
  • From: Kieran Bingham
• [PATCH 1/4] videodevice: Fix minor spacing
  • From: Kieran Bingham
• [PATCH 0/4] kms++util: Provide validation helpers
  • From: Kieran Bingham
• [PATCH/RFC v1.1] drm: rcar-du: Allow importing non-contiguous dma-buf with VSP
  • From: Laurent Pinchart
• [PATCH 3/4] spi: sh-msiof: Implement cs-gpios configuration
  • From: Geert Uytterhoeven
• [PATCH 0/4] spi: sh-msiof: Multi-slave enhancements
  • From: Geert Uytterhoeven
• [PATCH 4/4] spi: sh-msiof: Document hardware limitations related to chip selects
  • From: Geert Uytterhoeven
• [PATCH 2/4] spi: sh-msiof: Extend support to 3 native chip selects
  • From: Geert Uytterhoeven
• [PATCH 1/4] spi: sh-msiof: Avoid writing to registers from spi_master.setup()
  • From: Geert Uytterhoeven
• [PATCH 5/5] v4l2: async: Add debug output to v4l2-async module
  • From: Jacopo Mondi
• [PATCH 4/5] v4l2: async: Postpone subdev_notifier registration
  • From: Jacopo Mondi
• [PATCH 3/5] include: v4l2_async: Add 'owner' field to notifier
  • From: Jacopo Mondi
• [PATCH 2/5] device property: Add fwnode_get_name() operation
  • From: Jacopo Mondi
• [PATCH 1/5] v4l: async: Use endpoint node, not device node, for fwnode match
  • From: Jacopo Mondi
• [PATCH 0/5] Add debug output to v4l2-async
  • From: Jacopo Mondi
• Re: [PATCH] mmc: renesas_sdhi: Add MODULE_LICENSE
  • From: Wolfram Sang
• Re: [PATCH] Revert "ravb: add workaround for clock when resuming with WoL enabled"
  • From: David Miller
• Applied "ASoC: rsnd: Add device tree support for r8a774[35]" to the asoc tree
  • From: Mark Brown
• Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info
  • From: Andy Shevchenko
• Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info
  • From: Andy Shevchenko
• Re: [PATCH 2/6] i2c: add identifier in declarations for i2c_bus_recovery
  • From: Andy Shevchenko
• Re: [PATCH] gpio: Add helpers to determin direction of gpiods
  • From: Wolfram Sang
• Re: [PATCH] gpio: Add helpers to determin direction of gpiods
  • From: Linus Walleij
• Re: [PATCH v2] ASoC: rsnd: Add device tree support for r8a774[35]
  • From: Geert Uytterhoeven
• [PATCH v2] ASoC: rsnd: Add device tree support for r8a774[35]
  • From: Biju Das
• Re: [PATCH 1/2] dt-bindings: thermal: rcar: Add device tree support for r8a7743
  • From: Geert Uytterhoeven
• RE: [PATCH] dt-bindings: ASoC: rsnd: Add device tree support for r8a774[35]
  • From: Biju Das
• Re: [PATCH v1 07/10] v4l: i2c: Copy ov772x soc_camera sensor driver
  • From: Philippe Ombredanne
• Re: [PATCH] dt-bindings: ASoC: rsnd: Add device tree support for r8a774[35]
  • From: Mark Brown
• Re: [PATCH] dt-bindings: ASoC: rsnd: Add device tree support for r8a774[35]
  • From: Geert Uytterhoeven
• Re: [PATCH] dt-bindings: ASoC: rsnd: Add device tree support for r8a774[35]
  • From: Mark Brown
• Re: [PATCH v1 10/10] media: i2c: tw9910: Remove soc_camera dependencies
  • From: Hans Verkuil
• Re: [PATCH v1 07/10] v4l: i2c: Copy ov772x soc_camera sensor driver
  • From: Hans Verkuil
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: Hans Verkuil
• [PATCH 2/2] ARM: dts: r8a7743: Add thermal device to DT
  • From: Biju Das
• [PATCH 1/2] dt-bindings: thermal: rcar: Add device tree support for r8a7743
  • From: Biju Das
• [PATCH 0/2] Add thermal support for iWave RZ/G1M board
  • From: Biju Das
• Re: arm64: unhandled level 0 translation fault
  • From: Will Deacon
• Re: [PATCH] dt-bindings: ASoC: rsnd: Add device tree support for r8a774[35]
  • From: Geert Uytterhoeven
• RE: [PATCH 2/3] ARM: dts: r8a7743: Add CMT SoC specific support
  • From: Fabrizio Castro
• Re: [PATCH 2/3] ARM: dts: r8a7743: Add CMT SoC specific support
  • From: Geert Uytterhoeven
• Re: [PATCH 1/3] dt-bindings: timer: renesas, cmt: Document r8a774[35] CMT support
  • From: Geert Uytterhoeven
• RE: [PATCH 1/3] dt-bindings: timer: renesas, cmt: Document r8a774[35] CMT support
  • From: Fabrizio Castro
• RE: [PATCH 2/3] ARM: dts: r8a7743: Add CMT SoC specific support
  • From: Fabrizio Castro
• RE: [PATCH 0/5] Add Sound support for iWave RZ/G1M board
  • From: Biju Das
• Re: [PATCH 2/5] phy: renesas: rcar-gen3-usb2: unify OBINTEN handling
  • From: Sergei Shtylyov
• Re: [PATCH v2] drm: rcar-du: calculate DPLLCR to be more small jitter
  • From: Laurent Pinchart
• Re: [PATCH 0/5] Add Sound support for iWave RZ/G1M board
  • From: Simon Horman
• Re: [PATCH 5/5] phy: renesas: rcar-gen3-usb2: add gpio handling
  • From: Geert Uytterhoeven
• Re: [PATCH 3/3] ARM: dts: r8a7745: Add CMT SoC specific support
  • From: Simon Horman
• Re: [PATCH 1/3] dt-bindings: timer: renesas, cmt: Document r8a774[35] CMT support
  • From: Simon Horman
• Re: [PATCH 2/3] ARM: dts: r8a7743: Add CMT SoC specific support
  • From: Simon Horman
• Re: [PATCH 2/3] arm64: dts: renesas: r8a7796: move nodes which have no reg property out of bus
  • From: Geert Uytterhoeven
• Re: [PATCH] mmc: renesas_sdhi: Add MODULE_LICENSE
  • From: Simon Horman
• Re: [PATCH 1/2] PCI: rcar: Fix use-after-free in probe error path
  • From: Simon Horman
• Re: [PATCH 3/3] arm64: dts: renesas: r8a7796: add reg properties to pciec[01] nodes
  • From: Simon Horman
• Re: [PATCH 2/3] arm64: dts: renesas: r8a7796: move nodes which have no reg property out of bus
  • From: Simon Horman
• Re: [PATCH 1/3] arm64: dts: renesas: r8a7796: sort subnodes of root node alphabetically
  • From: Simon Horman
• Re: [PATCH 1/3] arm64: dts: renesas: r8a7796: sort subnodes of root node alphabetically
  • From: Simon Horman
• Re: [PATCH] arm64: dts: renesas: r8a7795: sort subnodes of root node alphabetically
  • From: Simon Horman
• [PATCH 4/4] usb: renesas_usbhs: add extcon notifier to set mode for non-otg channel
  • From: Yoshihiro Shimoda
• [PATCH 3/4] usb: renesas_usbhs: set the mode by using extcon state for non-otg channel
  • From: Yoshihiro Shimoda
• [PATCH 2/4] usb: renesas_usbhs: add a new callback for extcon notifier
  • From: Yoshihiro Shimoda
• [PATCH 1/4] usb: renesas_usbhs: Add a function to write the UGCTRL2 register
  • From: Yoshihiro Shimoda
• [PATCH 0/4] usb: renesas_usbhs: add extcon notifier for non-otg channel
  • From: Yoshihiro Shimoda
• [PATCH 4/5] phy: renesas: rcar-gen3-usb2: add rcar_gen3_role_swap_ops
  • From: Yoshihiro Shimoda
• [PATCH 5/5] phy: renesas: rcar-gen3-usb2: add gpio handling
  • From: Yoshihiro Shimoda
• [PATCH 2/5] phy: renesas: rcar-gen3-usb2: unify OBINTEN handling
  • From: Yoshihiro Shimoda
• [PATCH 1/5] phy: renesas: rcar-gen3-usb2: call INIT_WORK() anyway
  • From: Yoshihiro Shimoda
• [PATCH 3/5] phy: renesas: rcar-gen3-usb2: use prefix "has_otg_pins_" for dedicated pins handling
  • From: Yoshihiro Shimoda
• [PATCH 0/5] phy: renesas: rcar-gen3-usb2: add gpio handling for R-Car D3
  • From: Yoshihiro Shimoda
• [BUG] renesas/ravb: two possible sleep-in-atomic bugs in ravb_set_link_ksettings and ravb_nway_reset
  • From: Jia-Ju Bai
• [BUG] renesas/sh_eth: two possible sleep-in-atomic bugs in sh_eth_set_link_ksettings and sh_eth_nway_reset
  • From: Jia-Ju Bai
• [PATCH] mmc: renesas_sdhi: Add MODULE_LICENSE
  • From: Yoshihiro Shimoda
• Hang on Salvator-X(S) with v4.15-rc3
  • From: Geert Uytterhoeven
• Re: [PATCH] gpio: Add helpers to determin direction of gpiods
  • From: Wolfram Sang
• Re: arm64: unhandled level 0 translation fault
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] PCI: rcar: Fix use-after-free in probe error path
  • From: Bjorn Helgaas
• [PATCH 3/3] ARM: dts: r8a7745: Add CMT SoC specific support
  • From: Fabrizio Castro
• [PATCH 2/3] ARM: dts: r8a7743: Add CMT SoC specific support
  • From: Fabrizio Castro
• [PATCH 1/3] dt-bindings: timer: renesas, cmt: Document r8a774[35] CMT support
  • From: Fabrizio Castro
• [PATCH 0/3] Add CMT support to r8a774[35]
  • From: Fabrizio Castro
• [PATCH 5/5] ARM: dts: iwg20d-q7-common: Enable SGTL5000 audio codec
  • From: Biju Das
• [PATCH 4/5] ARM: dts: r8a7743: Add sound support
  • From: Biju Das
• [PATCH 3/5] ARM: dts: r8a7743: Add audio DMAC support
  • From: Biju Das
• [PATCH 2/5] ARM: dts: r8a7743: Add audio clocks
  • From: Biju Das
• [PATCH 1/5] ARM: shmobile: defconfig: Enable SGTL5000 audio codec
  • From: Biju Das
• [PATCH 0/5] Add Sound support for iWave RZ/G1M board
  • From: Biju Das
• [PATCH] dt-bindings: ASoC: rsnd: Add device tree support for r8a774[35]
  • From: Biju Das
• Re: [PATCH 0/2] PCI: rcar: Misc error path fixes
  • From: Lorenzo Pieralisi
• Re: [PATCH 0/2] PCI: rcar: Misc error path fixes
  • From: Geert Uytterhoeven
• Re: [PATCH] gpio: gpio-rcar: Support S2RAM
  • From: Yoshihiro Kaneko
• Re: [PATCH 0/2] PCI: rcar: Misc error path fixes
  • From: Bjorn Helgaas
• Re: arm64: unhandled level 0 translation fault
  • From: Will Deacon
• Re: arm64: unhandled level 0 translation fault
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC 1/2] v4l: v4l2-dev: Add infrastructure to protect device unplug race
  • From: Laurent Pinchart
• Re: [PATCH/RFC 1/2] v4l: v4l2-dev: Add infrastructure to protect device unplug race
  • From: Laurent Pinchart
• Re: arm64: unhandled level 0 translation fault
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC 1/2] v4l: v4l2-dev: Add infrastructure to protect device unplug race
  • From: Laurent Pinchart
• Re: [PATCH/RFC 1/2] v4l: v4l2-dev: Add infrastructure to protect device unplug race
  • From: Laurent Pinchart
• Re: [PATCH/RFC 1/2] v4l: v4l2-dev: Add infrastructure to protect device unplug race
  • From: Laurent Pinchart
• Re: [PATCH/RFC 1/2] v4l: v4l2-dev: Add infrastructure to protect device unplug race
  • From: Laurent Pinchart
• Re: [PATCH v2 2/3] PM / core: Add IN_BAND_WAKEUP driver flag
  • From: Ulf Hansson
• renesas-drivers-2017-12-12-v4.15-rc3
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC 1/2] v4l: v4l2-dev: Add infrastructure to protect device unplug race
  • From: Mauro Carvalho Chehab
• Re: [PATCH v4 0/9] vsp1: TLB optimisation and DL caching
  • From: Geert Uytterhoeven
• Re: arm64: unhandled level 0 translation fault
  • From: Will Deacon
• arm64: unhandled level 0 translation fault
  • From: Geert Uytterhoeven
• Re: [PATCH v1 05/10] arch: sh: migor: Use new renesas-ceu camera driver
  • From: Laurent Pinchart
• Re: [PATCH 3/3] arm64: dts: renesas: r8a7796: add reg properties to pciec[01] nodes
  • From: Geert Uytterhoeven
• Re: [PATCH] arm64: dts: renesas: r8a7795: sort subnodes of root node alphabetically
  • From: Geert Uytterhoeven
• Re: [PATCH 2/3] arm64: dts: renesas: r8a7796: move nodes which have no reg property out of bus
  • From: Geert Uytterhoeven
• Re: [PATCH 1/3] arm64: dts: renesas: r8a7796: sort subnodes of root node alphabetically
  • From: Geert Uytterhoeven
• [PATCH] arm64: dts: renesas: r8a7795: sort subnodes of root node alphabetically
  • From: Simon Horman
• [PATCH 2/3] arm64: dts: renesas: r8a7796: move nodes which have no reg property out of bus
  • From: Simon Horman
• [PATCH 1/3] arm64: dts: renesas: r8a7796: sort subnodes of root node alphabetically
  • From: Simon Horman
• [PATCH 0/3] arm64: dts: renesas: r8a7796: cleanup of make dtb W=1
  • From: Simon Horman
• [PATCH 3/3] arm64: dts: renesas: r8a7796: add reg properties to pciec[01] nodes
  • From: Simon Horman
• Re: [PATCH v2 2/3] PM / core: Add IN_BAND_WAKEUP driver flag
  • From: Geert Uytterhoeven
• Re: [PATCH 0/2] of: overlay: Crash fix and improvement
  • From: Frank Rowand
• Re: [PATCH v2 2/3] PM / core: Add IN_BAND_WAKEUP driver flag
  • From: Ulf Hansson
• Re: [PATCH v2 13/14] drm: rcar-du: Restrict DPLL duty cycle workaround to H3 ES1.x
  • From: Laurent Pinchart
• Re: [PATCH] Revert "ravb: add workaround for clock when resuming with WoL enabled"
  • From: Sergei Shtylyov
• Re: [PATCH v12 2/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Laurent Pinchart
• Re: [PATCH v12 1/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
  • From: Laurent Pinchart
• Re: [PATCH v3] net: sh_eth: do not advertise Gigabit capabilities when not available
  • From: David Miller
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: Laurent Pinchart
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: Laurent Pinchart
• Re: [PATCH v1 10/10] media: i2c: tw9910: Remove soc_camera dependencies
  • From: Laurent Pinchart
• Re: [PATCH v1 09/10] v4l: i2c: Copy tw9910 soc_camera sensor driver
  • From: Laurent Pinchart
• Re: [PATCH v1 07/10] v4l: i2c: Copy ov772x soc_camera sensor driver
  • From: Laurent Pinchart
• Re: [PATCH v1 08/10] media: i2c: ov772x: Remove soc_camera dependencies
  • From: Laurent Pinchart
• Re: [PATCH v1 05/10] arch: sh: migor: Use new renesas-ceu camera driver
  • From: Laurent Pinchart
• Re: [PATCH v1 02/10] include: media: Add Renesas CEU driver interface
  • From: Laurent Pinchart
• Re: [PATCH v1 02/10] include: media: Add Renesas CEU driver interface
  • From: Laurent Pinchart
• Re: [PATCH v1 01/10] dt-bindings: media: Add Renesas CEU bindings
  • From: Laurent Pinchart
• Re: [PATCH] Revert "ravb: add workaround for clock when resuming with WoL enabled"
  • From: Niklas Söderlund
• RE: [PATCH v2] dt-bindings: PCI: rcar: Add device tree support for r8a7743
  • From: Biju Das
• Re: [PATCH v2 2/3] PM / core: Add IN_BAND_WAKEUP driver flag
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/3] PM / core: Add IN_BAND_WAKEUP driver flag
  • From: Ulf Hansson
• [PATCH] Revert "ravb: add workaround for clock when resuming with WoL enabled"
  • From: Geert Uytterhoeven
• Re: [PATCH v4 0/4] Teach phylib hard-resetting devices
  • From: Simon Horman
• Re: [PATCH 1/2] net: sh_eth: add support for SH7786
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] net: sh_eth: add support for SH7786
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] net: sh_eth: add support for SH7786
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] net: sh_eth: add support for SH7786
  • From: Sergei Shtylyov
• Re: [PATCH v2 2/3] PM / core: Add IN_BAND_WAKEUP driver flag
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/3] PM / core: Add IN_BAND_WAKEUP driver flag
  • From: Ulf Hansson
• Re: [PATCH v2 2/3] PM / core: Add IN_BAND_WAKEUP driver flag
  • From: Rafael J. Wysocki
• Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info
  • From: Linus Walleij
• Re: [PATCH 0/2] of: overlay: Crash fix and improvement
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC 5/5] ARM: shmobile: defconfig: Disable CONFIG_EMBEDDED
  • From: Geert Uytterhoeven
• Re: [PATCH 0/2] of: overlay: Crash fix and improvement
  • From: Frank Rowand
• Re: [PATCH/RFC 5/5] ARM: shmobile: defconfig: Disable CONFIG_EMBEDDED
  • From: Rob Landley
• [renesas-drivers:topic/renesas-overlays 8/91] drivers//of/configfs.c:48:2: error: implicit declaration of function 'of_fdt_unflatten_tree'; did you mean 'of_pdt_build_devicetree'?
  • From: kbuild test robot
• Re: [PATCH v9 25/28] rcar-vin: extend {start,stop}_streaming to work with media controller
  • From: Laurent Pinchart
• Re: [PATCH v9 22/28] rcar-vin: add chsel information to rvin_info
  • From: Laurent Pinchart
• Re: [PATCH v9 21/28] rcar-vin: add group allocator functions
  • From: Laurent Pinchart
• Re: [PATCH v9 19/28] rcar-vin: use different v4l2 operations in media controller mode
  • From: Laurent Pinchart
• Re: [PATCH v9 13/28] rcar-vin: fix handling of single field frames (top, bottom and alternate fields)
  • From: Laurent Pinchart
• Re: [PATCH v9 11/28] rcar-vin: do not allow changing scaling and composing while streaming
  • From: Laurent Pinchart
• Re: [PATCH v9 03/28] rcar-vin: unregister video device on driver removal
  • From: Laurent Pinchart
• Re: [PATCH v4.1] phylib: Add device reset GPIO support
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] net: sh_eth: add support for SH7786
  • From: Thomas Petazzoni
• Re: [PATCH v2] net: sh_eth: do not advertise Gigabit capabilities when not available
  • From: Thomas Petazzoni
• [PATCH v3] net: sh_eth: do not advertise Gigabit capabilities when not available
  • From: Thomas Petazzoni
• Re: [PATCH 0/2] of: overlay: Crash fix and improvement
  • From: Geert Uytterhoeven
• Re: [PATCH 0/2] of: overlay: Crash fix and improvement
  • From: Rob Herring
• Re: [PATCH v9 11/28] rcar-vin: do not allow changing scaling and composing while streaming
  • From: Niklas Söderlund
• Re: [PATCH v9 13/28] rcar-vin: fix handling of single field frames (top, bottom and alternate fields)
  • From: Niklas Söderlund
• Re: NFS crash, hashed pointers in backtrace
  • From: Geert Uytterhoeven
• [PATCH 1/2] of: overlay: Fix out-of-bounds write in init_overlay_changeset()
  • From: Geert Uytterhoeven
• [PATCH 2/2] of: overlay: Make node skipping in init_overlay_changeset() clearer
  • From: Geert Uytterhoeven
• [PATCH 0/2] of: overlay: Crash fix and improvement
  • From: Geert Uytterhoeven
• Re: [PATCH v9 03/28] rcar-vin: unregister video device on driver removal
  • From: Niklas Söderlund
• Re: [PATCH v9 02/28] rcar-vin: rename poorly named initialize and cleanup functions
  • From: Niklas Söderlund
• Re: [PATCH v9 01/28] rcar-vin: add Gen3 devicetree bindings documentation
  • From: Niklas Söderlund
• Re: [PATCH 2/2] PCI: rcar: Handle rcar_pcie_parse_request_of_pci_ranges() failures
  • From: Lorenzo Pieralisi
• Re: [PATCH v9 27/28] rcar-vin: enable support for r8a7796
  • From: Laurent Pinchart
• Re: [PATCH v9 19/28] rcar-vin: use different v4l2 operations in media controller mode
  • From: Hans Verkuil
• Re: [PATCH 1/2] PCI: rcar: Fix use-after-free in probe error path
  • From: Lorenzo Pieralisi
• Re: [PATCH v9 26/28] rcar-vin: enable support for r8a7795
  • From: Laurent Pinchart
• Re: [PATCH v9 20/28] rcar-vin: prepare for media controller mode initialization
  • From: Laurent Pinchart
• Re: [PATCH v9 19/28] rcar-vin: use different v4l2 operations in media controller mode
  • From: Laurent Pinchart
• Re: [PATCH v9 18/28] rcar-vin: break out format alignment and checking
  • From: Laurent Pinchart
• Re: [PATCH v4.1] phylib: Add device reset GPIO support
  • From: Geert Uytterhoeven
• Re: [PATCH v9 17/28] rcar-vin: add flag to switch to media controller mode
  • From: Laurent Pinchart
• Re: [PATCH v9 16/28] rcar-vin: add function to manipulate Gen3 chsel value
  • From: Laurent Pinchart
• Re: [PATCH v9 15/28] rcar-vin: enable Gen3 hardware configuration
  • From: Laurent Pinchart
• Re: [PATCH v9 14/28] rcar-vin: move media bus configuration to struct rvin_info
  • From: Laurent Pinchart
• Re: [PATCH v9 13/28] rcar-vin: fix handling of single field frames (top, bottom and alternate fields)
  • From: Laurent Pinchart
• Re: [PATCH v9 12/28] rcar-vin: read subdevice format for crop only when needed
  • From: Laurent Pinchart
• Re: [PATCH v9 11/28] rcar-vin: do not allow changing scaling and composing while streaming
  • From: Laurent Pinchart
• Re: [PATCH v9 03/28] rcar-vin: unregister video device on driver removal
  • From: Laurent Pinchart
• Re: [PATCH v9 03/28] rcar-vin: unregister video device on driver removal
  • From: Hans Verkuil
• Re: [PATCH v9 09/28] rcar-vin: all Gen2 boards can scale simplify logic
  • From: Laurent Pinchart
• Re: [PATCH v9 08/28] rcar-vin: move functions regarding scaling
  • From: Laurent Pinchart
• Re: [PATCH v9 07/28] rcar-vin: change name of video device
  • From: Laurent Pinchart
• Re: [PATCH v9 06/28] rcar-vin: move max width and height information to chip information
  • From: Laurent Pinchart
• Re: [PATCH v9 05/28] rcar-vin: move chip information to own struct
  • From: Laurent Pinchart
• Re: [PATCH v9 04/28] rcar-vin: move subdevice handling to async callbacks
  • From: Laurent Pinchart
• Re: [PATCH v9 03/28] rcar-vin: unregister video device on driver removal
  • From: Laurent Pinchart
• Re: [PATCH v9 02/28] rcar-vin: rename poorly named initialize and cleanup functions
  • From: Laurent Pinchart
• Re: [PATCH v9 01/28] rcar-vin: add Gen3 devicetree bindings documentation
  • From: Laurent Pinchart
• [PATCH v9 04/28] rcar-vin: move subdevice handling to async callbacks
  • From: Niklas Söderlund
• [PATCH v9 05/28] rcar-vin: move chip information to own struct
  • From: Niklas Söderlund
• [PATCH v9 03/28] rcar-vin: unregister video device on driver removal
  • From: Niklas Söderlund
• [PATCH v9 10/28] rcar-vin: do not reset crop and compose when setting format
  • From: Niklas Söderlund
• [PATCH v9 06/28] rcar-vin: move max width and height information to chip information
  • From: Niklas Söderlund
• [PATCH v9 07/28] rcar-vin: change name of video device
  • From: Niklas Söderlund
• [PATCH v9 12/28] rcar-vin: read subdevice format for crop only when needed
  • From: Niklas Söderlund
• [PATCH v9 13/28] rcar-vin: fix handling of single field frames (top, bottom and alternate fields)
  • From: Niklas Söderlund
• [PATCH v9 11/28] rcar-vin: do not allow changing scaling and composing while streaming
  • From: Niklas Söderlund
• [PATCH v9 09/28] rcar-vin: all Gen2 boards can scale simplify logic
  • From: Niklas Söderlund
• [PATCH v9 08/28] rcar-vin: move functions regarding scaling
  • From: Niklas Söderlund
• [PATCH v9 00/28] rcar-vin: Add Gen3 with media controller
  • From: Niklas Söderlund
• [PATCH v9 20/28] rcar-vin: prepare for media controller mode initialization
  • From: Niklas Söderlund
• [PATCH v9 19/28] rcar-vin: use different v4l2 operations in media controller mode
  • From: Niklas Söderlund
• [PATCH v9 22/28] rcar-vin: add chsel information to rvin_info
  • From: Niklas Söderlund
• [PATCH v9 23/28] rcar-vin: parse Gen3 OF and setup media graph
  • From: Niklas Söderlund
• [PATCH v9 15/28] rcar-vin: enable Gen3 hardware configuration
  • From: Niklas Söderlund
• [PATCH v9 25/28] rcar-vin: extend {start,stop}_streaming to work with media controller
  • From: Niklas Söderlund
• [PATCH v9 24/28] rcar-vin: add link notify for Gen3
  • From: Niklas Söderlund
• [PATCH v9 27/28] rcar-vin: enable support for r8a7796
  • From: Niklas Söderlund
• [PATCH v9 18/28] rcar-vin: break out format alignment and checking
  • From: Niklas Söderlund
• [PATCH v9 21/28] rcar-vin: add group allocator functions
  • From: Niklas Söderlund
• [PATCH v9 28/28] rcar-vin: enable support for r8a77970
  • From: Niklas Söderlund
• [PATCH v9 26/28] rcar-vin: enable support for r8a7795
  • From: Niklas Söderlund
• [PATCH v9 14/28] rcar-vin: move media bus configuration to struct rvin_info
  • From: Niklas Söderlund
• [PATCH v9 16/28] rcar-vin: add function to manipulate Gen3 chsel value
  • From: Niklas Söderlund
• [PATCH v9 17/28] rcar-vin: add flag to switch to media controller mode
  • From: Niklas Söderlund
• [PATCH v9 02/28] rcar-vin: rename poorly named initialize and cleanup functions
  • From: Niklas Söderlund
• [PATCH v9 01/28] rcar-vin: add Gen3 devicetree bindings documentation
  • From: Niklas Söderlund
• [PATCH] kmstest.py: Update to th latest kmsxx Python bindings
  • From: Laurent Pinchart
• Re: [PATCH v4.1] phylib: Add device reset GPIO support
  • From: Sergei Shtylyov
• Re: [PATCH v4.1] phylib: Add device reset GPIO support
  • From: Sergei Shtylyov
• Re: issue on rcar-du and/or vsp suspend-resume paths
  • From: Nikita Yushchenko
• Applied "spi: rspi: Do not set SPCR_SPE in qspi_set_config_register()" to the spi tree
  • From: Mark Brown
• Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info
  • From: Wolfram Sang
• Re: [PATCH] i2c: imx: use proper GPIO directions for recovery
  • From: Wolfram Sang
• Re: [PATCH v5] v4l2-async: Match parent devices
  • From: Kieran Bingham
• Re: issue on rcar-du and/or vsp suspend-resume paths
  • From: Kieran Bingham
• Re: [PATCH 0/2] PCI: rcar: Misc error path fixes
  • From: Simon Horman
• Re: [PATCH] gpio: gpio-rcar: Support S2RAM
  • From: Simon Horman
• [PATCH 1/2] ARM: dts: r8a7743: sort root sub-nodes alphabetically
  • From: Simon Horman
• [PATCH 2/2] ARM: dts: r8a7743: move timer node out of bus
  • From: Simon Horman
• [PATCH 0/2] ARM: dts: r8a7743: Timer node nodes out of bus
  • From: Simon Horman
• [PATCH 1/2] PCI: rcar: Fix use-after-free in probe error path
  • From: Geert Uytterhoeven
• [PATCH 2/2] PCI: rcar: Handle rcar_pcie_parse_request_of_pci_ranges() failures
  • From: Geert Uytterhoeven
• [PATCH 0/2] PCI: rcar: Misc error path fixes
  • From: Geert Uytterhoeven
• [PATCH] spi: rspi: Do not set SPCR_SPE in qspi_set_config_register()
  • From: Geert Uytterhoeven
• Re: [PATCH v4] arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus
  • From: Simon Horman
• [PATCH 4/4] arm64: dts: renesas: salvator-common: enable usb3_peri0
  • From: Yoshihiro Shimoda
• [PATCH 3/4] arm64: dts: renesas: salvator-common: enable usb3_phy0 node
  • From: Yoshihiro Shimoda
• [PATCH 2/4] arm64: dts: renesas: r8a7796: add usb3_phy node
  • From: Yoshihiro Shimoda
• [PATCH 1/4] arm64: dts: renesas: r8a7795: add usb3_phy node
  • From: Yoshihiro Shimoda
• [PATCH 0/4] arm64: dts: renesas: r8a779[56] and salvator-common: add usb3_phy and enable usb3_peri0
  • From: Yoshihiro Shimoda
• [PATCH 41/54] arm64: dts: renesas: r8a77995: Add CAN FD support
  • From: Simon Horman
• [PATCH 38/54] arm64: dts: renesas: r8a7795-salvator-xs: Add SoC name to file header
  • From: Simon Horman
• [PATCH 53/54] arm64: dts: renesas: r8a77970: use CPG core clock macros
  • From: Simon Horman
• [PATCH 54/54] arm64: dts: renesas: r8a77970: use SYSC power domain macros
  • From: Simon Horman
• [PATCH 51/54] arm64: dts: renesas: initial V3MSK board device tree
  • From: Simon Horman
• [PATCH 47/54] arm64: dts: renesas: r8a77970: Connect Ethernet-AVB to IPMMU-RT
  • From: Simon Horman
• [PATCH 52/54] arm64: dts: renesas: v3msk: add EtherAVB support
  • From: Simon Horman
• [PATCH 39/54] arm64: dts: renesas: r8a77995: Add CAN external clock support
  • From: Simon Horman
• [PATCH 50/54] arm64: dts: renesas: r8a77995: Connect Ethernet-AVB to IPMMU-RT
  • From: Simon Horman
• [PATCH 49/54] arm64: dts: renesas: r8a77995: Add IPMMU device nodes
  • From: Simon Horman
• [PATCH 48/54] arm64: dts: renesas: r8a77970: Enable IPMMU-DS1, RT and MM
  • From: Simon Horman
• [PATCH 44/54] arm64: dts: renesas: r8a77995: add DMA for SCIF2
  • From: Simon Horman
• [PATCH 46/54] arm64: dts: renesas: r8a77970: Tie SYS-DMAC to IPMMU-DS1
  • From: Simon Horman
• [PATCH 43/54] arm64: dts: renesas: r8a77970: sort includes
  • From: Simon Horman
• [PATCH 45/54] arm64: dts: renesas: r8a77970: Add IPMMU device nodes
  • From: Simon Horman
• [PATCH 42/54] arm64: dts: renesas: r8a7795: Increase the number of GPIO bank 1 ports to 29
  • From: Simon Horman
• [PATCH 40/54] arm64: dts: renesas: r8a77995: Add CAN support
  • From: Simon Horman
• [PATCH 36/54] arm64: dts: renesas: r8a7795-salvator-x: Add SoC name to file header
  • From: Simon Horman
• [PATCH 37/54] arm64: dts: renesas: r8a7796-salvator-x: Add SoC name to file header
  • From: Simon Horman
• [PATCH 35/54] arm64: dts: renesas: r8a7795-es1-salvator-x: Add SoC name to file header
  • From: Simon Horman
• [PATCH 34/54] arm64: dts: renesas: salvator-common: Add BD9571 PMIC
  • From: Simon Horman
• [PATCH 33/54] arm64: dts: renesas: r8a7795: Enable IPMMU-VI0, VP1, DS0, DS1 and MM
  • From: Simon Horman
• [PATCH 31/54] arm64: dts: renesas: r8a7795: Connect SATA to IPMMU-HC
  • From: Simon Horman
• [PATCH 30/54] arm64: dts: renesas: r8a7795: Connect Ethernet-AVB to IPMMU-DS0
  • From: Simon Horman
• [PATCH 29/54] arm64: dts: renesas: r8a7795-es1: Point VSPI via FCPVI to IPMMU-VP
  • From: Simon Horman
• [PATCH 32/54] arm64: dts: renesas: r8a7795-es1: Enable IPMMU-MP1
  • From: Simon Horman
• [PATCH 24/54] arm64: dts: renesas: r8a7795-es1: Point DU/VSPD via FCPVD to IPMMU-VI0
  • From: Simon Horman
• [PATCH 27/54] arm64: dts: renesas: r8a7795: Point VSPBC/VSPBD via FCPVB to IPMMU-VP0/1
  • From: Simon Horman
• [PATCH 23/54] arm64: dts: renesas: r8a7795: Point DU/VSPD via FCPVD to IPMMU-VI0/1
  • From: Simon Horman
• [PATCH 28/54] arm64: dts: renesas: r8a7795: Point VSPI via FCPVI to IPMMU-VP0/1
  • From: Simon Horman
• [PATCH 25/54] arm64: dts: renesas: r8a7795: Point FDP1 via FCPF to IPMMU-VP0/1
  • From: Simon Horman
• [PATCH 26/54] arm64: dts: renesas: r8a7795-es1: Point FDP1 via FCPF to IPMMU-VP0
  • From: Simon Horman
• [PATCH 21/54] arm64: dts: renesas: r8a7795: Tie SYS-DMAC to IPMMU-DS0/1
  • From: Simon Horman
• [PATCH 20/54] arm64: dts: renesas: r8a7795-es1: Add IPMMU device nodes
  • From: Simon Horman
• [PATCH 07/54] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W
  • From: Simon Horman
• [PATCH 22/54] arm64: dts: renesas: r8a7795: Tie Audio-DMAC to IPMMU-MP0/1
  • From: Simon Horman
• [PATCH 09/54] arm64: dts: renesas: r8a7796: Tie SYS-DMAC to IPMMU-DS0/1
  • From: Simon Horman
• [PATCH 19/54] arm64: dts: renesas: r8a7795: Add IPMMU device nodes
  • From: Simon Horman
• [PATCH 18/54] arm64: dts: renesas: r8a77995: Add SDHI (MMC) support
  • From: Simon Horman
• [PATCH 17/54] arm64: dts: renesas: r8a77995: add SYS-DMAC nodes
  • From: Simon Horman
• [PATCH 16/54] arm64: dts: renesas: ulcb-kf: add dr_mode property for USB2.0 channel 0
  • From: Simon Horman
• [PATCH 15/54] arm64: dts: renesas: ulcb-kf: enable USB2 PHY of channel 0
  • From: Simon Horman
• [PATCH 10/54] arm64: dts: renesas: r8a7796: Tie Audio-DMAC to IPMMU-MP
  • From: Simon Horman
• [PATCH 14/54] arm64: dts: renesas: r8a7796: Enable IPMMU-DS0, DS1, MP, VI0, VC0 and MM
  • From: Simon Horman
• [PATCH 13/54] arm64: dts: renesas: r8a7796: Connect Ethernet-AVB to IPMMU-DS0
  • From: Simon Horman
• [PATCH 12/54] arm64: dts: renesas: r8a7796: Point VSPI via FCPVI to IPMMU-VC0
  • From: Simon Horman
• [PATCH 11/54] arm64: dts: renesas: r8a7796: Point FDP1 via FCPF to IPMMU-VI0
  • From: Simon Horman
• [PATCH 08/54] arm64: dts: renesas: r8a7796: Add IPMMU device nodes
  • From: Simon Horman
• [PATCH 06/54] arm64: dts: renesas: eagle: Enable watchdog timer
  • From: Simon Horman
• [PATCH 05/54] arm64: dts: renesas: eagle: Move avb node to preserve sort order
  • From: Simon Horman
• [PATCH 03/54] arm64: dts: renesas: r8a7796: Use R-Car SDHI Gen3 fallback compat string
  • From: Simon Horman
• [PATCH 01/54] arm64: dts: renesas: salvator: set driver type for eMMC
  • From: Simon Horman
• [PATCH 02/54] arm64: dts: renesas: r8a7795: Use R-Car SDHI Gen3 fallback compat string
  • From: Simon Horman
• [PATCH 04/54] arm64: dts: renesas: r8a77970: Add RWDT node
  • From: Simon Horman
• [GIT PULL] Renesas ARM64 Based SoC DT Updates for v4.16
  • From: Simon Horman
• Re: [PATCH] gpio: gpio-rcar: Support S2RAM
  • From: Geert Uytterhoeven
• Re: [PATCH] gpio: gpio-rcar: Support S2RAM
  • From: Geert Uytterhoeven
• Re: [PATCH] gpio: gpio-rcar: Support S2RAM
  • From: Simon Horman
• Re: [PATCH v2] ARM: dts: r8a7745: Add APMU node and second CPU core
  • From: Simon Horman
• Re: [PATCH v5] v4l2-async: Match parent devices
  • From: Sakari Ailus
• Re: [PATCH] gpio: gpio-rcar: Support S2RAM
  • From: Geert Uytterhoeven
• Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
  • From: Geert Uytterhoeven
• [PATCH] gpio: gpio-rcar: Support S2RAM
  • From: Yoshihiro Kaneko
• [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
  • From: Yoshihiro Kaneko
• Re: NFS crash, hashed pointers in backtrace
  • From: Geert Uytterhoeven
• Re: NFS crash, hashed pointers in backtrace
  • From: Trond Myklebust
• Re: [PATCH v5] v4l2-async: Match parent devices
  • From: Kieran Bingham
• Re: [PATCH v5] v4l2-async: Match parent devices
  • From: jacopo mondi
• [PATCH v5] v4l2-async: Match parent devices
  • From: Kieran Bingham
• Re: NFS crash, hashed pointers in backtrace
  • From: Geert Uytterhoeven
• Re: [PATCH v2] ARM: dts: r8a7745: Add APMU node and second CPU core
  • From: Geert Uytterhoeven
• [PATCH v2] ARM: dts: r8a7745: Add APMU node and second CPU core
  • From: Fabrizio Castro
• RE: [PATCH 1/8] ARM: dts: r8a7745: Add APMU node and second CPU core
  • From: Fabrizio Castro
• RE: [PATCH 1/8] ARM: dts: r8a7745: Add APMU node and second CPU core
  • From: Fabrizio Castro
• Re: [PATCH 1/8] ARM: dts: r8a7745: Add APMU node and second CPU core
  • From: Geert Uytterhoeven
• [PATCH 59/61] ARM: dts: lager: Convert to named i2c-gpio bindings
  • From: Simon Horman
• [PATCH 58/61] ARM: dts: armadillo800eva: Convert to named i2c-gpio bindings
  • From: Simon Horman
• [PATCH 57/61] ARM: dts: sh73a0: Remove CMT renesas,channels-mask
  • From: Simon Horman
• [PATCH 24/61] ARM: dts: r8a7791: Use R-Car SDHI Gen2 fallback compat string
  • From: Simon Horman
• [PATCH 42/61] ARM: dts: r8a7745: add VIN dt support
  • From: Simon Horman
• [PATCH 40/61] ARM: dts: iwg20d-q7: Enable PCIe Controller
  • From: Simon Horman
• [PATCH 47/61] ARM: dts: r8a7790: Update CMT compat strings
  • From: Simon Horman
• [PATCH 43/61] ARM: dts: koelsch: Correct primary compatible value for eeprom
  • From: Simon Horman
• [PATCH 60/61] ARM: dts: koelsch: Convert to named i2c-gpio bindings
  • From: Simon Horman
• [PATCH 33/61] ARM: dts: iwg22d-sodimm: Add can0 support to carrier board
  • From: Simon Horman
• [PATCH 55/61] ARM: dts: r8a7793: Remove CMT renesas,channels-mask
  • From: Simon Horman
• [PATCH 41/61] ARM: dts: r8a7743: add VIN dt support
  • From: Simon Horman
• [PATCH 20/61] ARM: dts: r8a7745: Use R-Car SDHI Gen2 fallback compat string
  • From: Simon Horman
• [PATCH 15/61] ARM: dts: r8a7745: Add USB-DMAC device nodes
  • From: Simon Horman
• [PATCH 61/61] ARM: dts: alt: Convert to named i2c-gpio bindings
  • From: Simon Horman
• [PATCH 45/61] ARM: dts: r8a7794: Add SMP support
  • From: Simon Horman
• [PATCH 56/61] ARM: dts: r8a7794: Remove CMT renesas,channels-mask
  • From: Simon Horman
• [PATCH 52/61] ARM: dts: r8a7740: Remove CMT renesas,channels-mask
  • From: Simon Horman
• [PATCH 54/61] ARM: dts: r8a7791: Remove CMT renesas,channels-mask
  • From: Simon Horman
• [PATCH 53/61] ARM: dts: r8a7790: Remove CMT renesas,channels-mask
  • From: Simon Horman
• [PATCH 51/61] ARM: dts: r8a73a4: Remove CMT renesas,channels-mask
  • From: Simon Horman
• [PATCH 50/61] ARM: dts: r8a7794: Update CMT compat strings
  • From: Simon Horman
• [PATCH 49/61] ARM: dts: r8a7793: Update CMT compat strings
  • From: Simon Horman
• [PATCH 48/61] ARM: dts: r8a7791: Update CMT compat strings
  • From: Simon Horman
• [PATCH 46/61] ARM: dts: r8a73a4: Update CMT compat string
  • From: Simon Horman
• [PATCH 37/61] ARM: dts: iwg20d-q7-dbcm-ca: Add can1 support to camera DB
  • From: Simon Horman
• [PATCH 44/61] ARM: dts: genmai: Correct primary compatible value for eeprom
  • From: Simon Horman
• [PATCH 36/61] ARM: dts: iwg20d-q7-common: Add can0 support to carrier board
  • From: Simon Horman
• [PATCH 34/61] ARM: dts: iwg22d-sodimm-dbhd-ca: Add can1 support to HDMI DB
  • From: Simon Horman
• [PATCH 31/61] ARM: dts: iwg22d-sodimm-dbhd-ca: Add HDMI video output
  • From: Simon Horman
• [PATCH 19/61] ARM: dts: r8a7743: Use R-Car SDHI Gen2 fallback compat string
  • From: Simon Horman
• [PATCH 39/61] ARM: dts: r8a7743: Add PCIe Controller device node
  • From: Simon Horman
• [PATCH 28/61] ARM: dts: iwg20d-q7: Add support for ttySC3
  • From: Simon Horman
• [PATCH 30/61] ARM: dts: r8a7745: Add DU support
  • From: Simon Horman
• [PATCH 38/61] ARM: dts: r8a7743: Add default PCIe bus clock
  • From: Simon Horman
• [PATCH 26/61] ARM: dts: r8a7793: Use R-Car SDHI Gen2 fallback compat string
  • From: Simon Horman
• [PATCH 23/61] ARM: dts: r8a7790: Use R-Car SDHI Gen2 fallback compat string
  • From: Simon Horman
• [PATCH 03/61] ARM: dts: r8a7778: Use R-Car Gen1 Ether fallback compat string
  • From: Simon Horman
• [PATCH 29/61] ARM: dts: koelsch: Move cec_clock to root node
  • From: Simon Horman
• [PATCH 22/61] ARM: dts: r8a7779: Use R-Car SDHI Gen1 fallback compat string
  • From: Simon Horman
• [PATCH 14/61] ARM: dts: r8a7745: Add HS-USB device node
  • From: Simon Horman
• [PATCH 35/61] ARM: dts: r8a7743: Add CAN[01] SoC support
  • From: Simon Horman
• [PATCH 27/61] ARM: dts: r8a7794: Use R-Car SDHI Gen2 fallback compat string
  • From: Simon Horman
• [PATCH 25/61] ARM: dts: r8a7792: Use R-Car SDHI Gen2 fallback compat string
  • From: Simon Horman
• [PATCH 32/61] ARM: dts: r8a7745: Add CAN[01] SoC support
  • From: Simon Horman
• [PATCH 16/61] ARM: dts: r8a7745: Enable DMA for HSUSB
  • From: Simon Horman
• [PATCH 21/61] ARM: dts: r8a7778: Use R-Car SDHI Gen1 fallback compat string
  • From: Simon Horman
• [PATCH 18/61] ARM: dts: r8a7745: Add IIC cores to dtsi
  • From: Simon Horman
• [PATCH 04/61] ARM: dts: r8a7790: Use R-Car Gen2 Ether fallback compat string
  • From: Simon Horman
• [PATCH 12/61] ARM: dts: iwg22d-sodimm-dbhd-ca: Add device tree for HDMI DB
  • From: Simon Horman
• [PATCH 10/61] ARM: dts: iwg22d: Use /dev/ttySC3 as debug console
  • From: Simon Horman
• [PATCH 13/61] ARM: dts: iwg22d-sodimm: sort dt nodes
  • From: Simon Horman
• [PATCH 17/61] ARM: dts: iwg22d-sodimm: Enable HS-USB
  • From: Simon Horman
• [PATCH 09/61] ARM: dts: iwg20d-q7-dbcm-ca: Add HDMI video output
  • From: Simon Horman
• [PATCH 08/61] ARM: dts: r8a7743: Add DU support
  • From: Simon Horman
• [PATCH 11/61] ARM: dts: iwg22d: Add /dev/ttySC5 support
  • From: Simon Horman
• [PATCH 02/61] ARM: dts: r8a7745: Use R-Car Gen2 Ether fallback compat string
  • From: Simon Horman
• [PATCH 07/61] ARM: dts: r8a7794: Use R-Car Gen2 Ether fallback compat string
  • From: Simon Horman
• [PATCH 01/61] ARM: dts: r8a7743: Use R-Car Gen2 Ether fallback compat string
  • From: Simon Horman
• [PATCH 05/61] ARM: dts: r8a7791: Use R-Car Gen2 Ether fallback compat string
  • From: Simon Horman
• [PATCH 06/61] ARM: dts: r8a7793: Use R-Car Gen2 Ether fallback compat string
  • From: Simon Horman
• [GIT PULL] Renesas ARM Based SoC DT Updates for v4.16
  • From: Simon Horman
• [PATCH 1/1] soc: renesas: Identify R-Car M3-W ES1.1
  • From: Simon Horman
• [GIT PULL] Renesas ARM Based SoC Updates for v4.16
  • From: Simon Horman
• [PATCH 2/2] arm64: renesas: document V3MSK board bindings
  • From: Simon Horman
• [PATCH 1/2] ARM: shmobile: Document Renesas M3-W-based Salvator-XS board DT bindings
  • From: Simon Horman
• [GIT PULL] Renesas ARM Based SoC DT Bindings Updates for v4.16
  • From: Simon Horman
• Re: [PATCH] clk: renesas: r8a77970: add LVDS clock
  • From: Geert Uytterhoeven
• [PATCH 3/3] usb: renesas_usbhs: use PIPEnCLR.ACLRM instead of {C,Dn}FIFOCTR.BCLR in usbhs_pkt_pop()
  • From: Yoshihiro Shimoda
• [PATCH 1/3] usb: renesas_usbhs: remove redundant polling in usbhsf_fifo_barrier()
  • From: Yoshihiro Shimoda
• [PATCH 2/3] usb: renesas_usbhs: add usbhs_pipe_clear_without_sequence() function
  • From: Yoshihiro Shimoda
• [PATCH 0/3] usb: renesas_usbhs: modify fifo/pipe buffer clear handling
  • From: Yoshihiro Shimoda
• [PATCH v2] drm: rcar-du: calculate DPLLCR to be more small jitter
  • From: Kuninori Morimoto
• Re: [PATCH] drm: rcar-du: calculate DPLLCR to be more small jitter
  • From: Kuninori Morimoto
• Re: [PATCH v2 1/3] PM / core: Re-factor some code dealing with parents in __device_suspend()
  • From: Rafael J. Wysocki
• [PATCH] clk: renesas: r8a77970: add LVDS clock
  • From: Sergei Shtylyov
• [PATCH] v4l: rcar-csi2: Don't bail out from probe on no ep
  • From: Jacopo Mondi
• Re: [PATCH 1/2] net: sh_eth: add support for SH7786
  • From: David Miller
• Re: [PATCH 1/2] net: sh_eth: add support for SH7786
  • From: Sergei Shtylyov
• Re: [PATCH 0/2] net: sh_eth: add support for SH7786 and big-endian
  • From: David Miller
• Re: [PATCH 0/2] net: sh_eth: DMA mapping API fixes
  • From: David Miller
• Re: [PATCH 1/2] net: sh_eth: add support for SH7786
  • From: Sergei Shtylyov
• Re: [PATCH v2] net: sh_eth: do not advertise Gigabit capabilities when not available
  • From: Sergei Shtylyov
• Re: [PATCH v2] net: sh_eth: do not advertise Gigabit capabilities when not available
  • From: Andrew Lunn
• Re: [PATCH v4 0/4] Teach phylib hard-resetting devices
  • From: David Miller
• Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info
  • From: Wolfram Sang
• Re: NFS crash, hashed pointers in backtrace
  • From: Linus Torvalds
• Re: [PATCH] mmc: core: properly init drv_type
  • From: Ulf Hansson
• NFS crash, hashed pointers in backtrace
  • From: Geert Uytterhoeven
• Re: [PATCH] PM / runtime: Drop children check from __pm_runtime_set_status()
  • From: Ulf Hansson
• Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info
  • From: Linus Walleij
• Re: [PATCH v2 10/22] mmc: tmio: support IP-builtin card detection logic
  • From: Wolfram Sang
• Re: [PATCH] PM / runtime: Drop children check from __pm_runtime_set_status()
  • From: Rafael J. Wysocki
• Re: [PATCH v2 10/22] mmc: tmio: support IP-builtin card detection logic
  • From: Masahiro Yamada
• RE: [PATCH] PM / runtime: Drop children check from __pm_runtime_set_status()
  • From: Alan Stern
• Re: [PATCH v12 1/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
  • From: Sakari Ailus
• Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info
  • From: Wolfram Sang
• [PATCH/RFT 2/3] mmc: renesas_sdhi: Add eMMC HS400 mode support
  • From: Simon Horman
• [PATCH/RFT 1/3] mmc: tmio: Add eMMC HS400 mode support
  • From: Simon Horman
• [PATCH/RFT 0/3] mmc: renesas_sdhi: Add eMMC HS400 mode support
  • From: Simon Horman
• [PATCH/RFT 3/3] arm64: dts: salvator-common: Enable HS400 of SDHI2
  • From: Simon Horman
• Re: [PATCH v6 0/9] i2c: document DMA handling and add helpers for it
  • From: Jonathan Cameron
• Re: [PATCH 1/2] net: sh_eth: add support for SH7786
  • From: Geert Uytterhoeven
• Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info
  • From: Linus Walleij
• Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info
  • From: Wolfram Sang
• Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info
  • From: Phil Reid
• Re: [PATCH 1/2] net: sh_eth: use correct "struct device" when calling DMA mapping functions
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] net: sh_eth: use correct "struct device" when calling DMA mapping functions
  • From: Thomas Petazzoni
• [PATCH v2] net: sh_eth: do not advertise Gigabit capabilities when not available
  • From: Thomas Petazzoni
• Re: [PATCH 0/6] i2c: send STOP after recovery; use it for i2c-rcar
  • From: Andrzej Hajda
• Re: [PATCH 2/2] net: sh_eth: don't use NULL as "struct device" for the DMA mapping API
  • From: Geert Uytterhoeven
• Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info
  • From: Linus Walleij
• Re: [PATCH 1/2] net: sh_eth: use correct "struct device" when calling DMA mapping functions
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] net: sh_eth: use correct "struct device" when calling DMA mapping functions
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC 5/5] ARM: shmobile: defconfig: Disable CONFIG_EMBEDDED
  • From: Simon Horman
• Re: [PATCH 1/2] net: sh_eth: add support for SH7786
  • From: Thomas Petazzoni
• Re: [PATCH v2 02/22] mmc: renesas_sdhi: remove wrong depends on to enable compile test
  • From: Masahiro Yamada
• RE: [PATCH] PM / runtime: Drop children check from __pm_runtime_set_status()
  • From: Yoshihiro Shimoda
• Re: [PATCH 0/6] i2c: send STOP after recovery; use it for i2c-rcar
  • From: Phil Reid
• Re: [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info
  • From: Phil Reid
• Re: [PATCH] i2c: imx: use proper GPIO directions for recovery
  • From: Phil Reid
• Re: [PATCH v2 09/22] mmc: tmio: use mmc_can_gpio_cd() instead of checking TMIO_MMC_USE_GPIO_CD
  • From: Wolfram Sang
• Re: [PATCH v6 0/9] i2c: document DMA handling and add helpers for it
  • From: Mark Brown
• Re: [PATCH 0/6] R-Car D3 (r8a77995) I2C integration
  • From: Wolfram Sang
• Re: [PATCH v2 2/2] arm64: dts: r8a77995: draak: enable SDHI2
  • From: Wolfram Sang
• Re: [PATCH v2 1/2] mmc: renesas_sdhi: enable R-Car D3 (r8a77995) support
  • From: Wolfram Sang
• Re: [PATCH v6 0/9] i2c: document DMA handling and add helpers for it
  • From: Wolfram Sang
• Re: [PATCH] i2c: gpio: add fault injector
  • From: Wolfram Sang
• Re: [PATCH v12 2/2] rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Sakari Ailus
• Re: [PATCH 1/2] net: sh_eth: use correct "struct device" when calling DMA mapping functions
  • From: Sergei Shtylyov
• Re: [PATCH] net: sh_eth: do not advertise Gigabit capabilities when not available
  • From: Andrew Lunn
• Re: [PATCH] v4l: vsp1: Fix function declaration/definition mismatch
  • From: Laurent Pinchart
• Re: [PATCH] v4l: vsp1: Fix function declaration/definition mismatch
  • From: Eugeniu Rosca
• Re: [PATCH] net: sh_eth: do not advertise Gigabit capabilities when not available
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] net: sh_eth: don't use NULL as "struct device" for the DMA mapping API
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] net: sh_eth: use correct "struct device" when calling DMA mapping functions
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] net: sh_eth: add support for SH7786
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] net: sh_eth: add support for SH7786
  • From: Sergei Shtylyov
• [GIT PULL FOR v4.16] R-Car DU changes
  • From: Laurent Pinchart
• Re: [PATCH 2/2] net: sh_eth: make work on big endian systems
  • From: Sergei Shtylyov
• Re: [PATCH v4.1] phylib: Add device reset GPIO support
  • From: Richard Leitner
• Re: [PATCH] net: sh_eth: do not advertise Gigabit capabilities when not available
  • From: Sergei Shtylyov
• Re: [PATCH v2 02/22] mmc: renesas_sdhi: remove wrong depends on to enable compile test
  • From: Wolfram Sang
• Re: [PATCH v2 08/22] mmc: tmio: move mmc_gpio_request_cd() before mmc_add_host()
  • From: Wolfram Sang
• Re: [PATCH v2 10/22] mmc: tmio: support IP-builtin card detection logic
  • From: Wolfram Sang
• Re: [PATCH] net: sh_eth: do not advertise Gigabit capabilities when not available
  • From: Andrew Lunn
• Re: [PATCH v2 13/22] mmc: tmio,renesas_sdhi: move Renesas-specific DMA data to renesas_sdhi.h
  • From: Wolfram Sang
• Re: [PATCH v2 15/22] mmc: tmio: change bus_shift to unsigned int
  • From: Wolfram Sang
• Re: [PATCH v2 14/22] mmc: tmio,renesas_sdhi: move ssc_tappos to renesas_sdhi.h
  • From: Wolfram Sang
• Re: [PATCH v2 12/22] mmc: tmio,renesas_sdhi: move struct tmio_mmc_dma to renesas_sdhi.h
  • From: Wolfram Sang
• Re: [PATCH v2 11/22] mmc: renesas_sdhi: remove always false condition
  • From: Wolfram Sang
• Re: [PATCH v2 03/22] mmc: renesas_sdhi: remove eprobe jump label
  • From: Wolfram Sang
• [PATCH 1/2] net: sh_eth: add support for SH7786
  • From: Thomas Petazzoni
• [PATCH 2/2] net: sh_eth: make work on big endian systems
  • From: Thomas Petazzoni
• [PATCH 0/2] net: sh_eth: add support for SH7786 and big-endian
  • From: Thomas Petazzoni
• [PATCH] net: sh_eth: do not advertise Gigabit capabilities when not available
  • From: Thomas Petazzoni
• Re: [PATCH v3 2/2] drm: rcar-du: Clip planes to screen boundaries
  • From: Kieran Bingham
• Re: [PATCH] v4l: rcar-vin: Implement V4L2 video node release handler
  • From: Hans Verkuil
• [PATCH 2/2] net: sh_eth: don't use NULL as "struct device" for the DMA mapping API
  • From: Thomas Petazzoni
• [PATCH 1/2] net: sh_eth: use correct "struct device" when calling DMA mapping functions
  • From: Thomas Petazzoni
• [PATCH 0/2] net: sh_eth: DMA mapping API fixes
  • From: Thomas Petazzoni
• Re: [PATCH] v4l: rcar-vin: Implement V4L2 video node release handler
  • From: Niklas Söderlund
• [PATCH 6/6] i2c: rcar: implement bus recovery
  • From: Wolfram Sang
• [PATCH 5/6] i2c: send STOP after successful bus recovery
  • From: Wolfram Sang
• [PATCH 4/6] i2c: ensure SDA is released in recovery if SDA is controllable
  • From: Wolfram Sang
• [PATCH 3/6] i2c: add 'set_sda' to bus_recovery_info
  • From: Wolfram Sang
• [PATCH 2/6] i2c: add identifier in declarations for i2c_bus_recovery
  • From: Wolfram Sang
• [PATCH 0/6] i2c: send STOP after recovery; use it for i2c-rcar
  • From: Wolfram Sang
• [PATCH 1/6] i2c: make kerneldoc about bus recovery more precise
  • From: Wolfram Sang
• [PATCH v4.1] phylib: Add device reset GPIO support
  • From: Geert Uytterhoeven
• [PATCH] i2c: imx: use proper GPIO directions for recovery
  • From: Wolfram Sang
• Re: [renesas-drivers:topic/phy-reset-v4 1/4] include/linux/err.h:31:9: warning: 'gpiod' may be used uninitialized in this function
  • From: Geert Uytterhoeven
• Re: [PATCH 5/9] v4l: vsp1: Document the vsp1_du_atomic_config structure
  • From: Laurent Pinchart
• [renesas-drivers:topic/phy-reset-v4 1/4] include/linux/err.h:31:9: warning: 'gpiod' may be used uninitialized in this function
  • From: kbuild test robot
• [PATCH v3] media: vsp1: Prevent suspending and resuming DRM pipelines
  • From: Kieran Bingham
• Re: [PATCH] v4l: vsp1: Fix function declaration/definition mismatch
  • From: Laurent Pinchart
• Re: [PATCH] PM / runtime: Drop children check from __pm_runtime_set_status()
  • From: Ulf Hansson
• [PATCH v4 1/4] phylib: Add device reset GPIO support
  • From: Geert Uytterhoeven
• [PATCH v4 4/4] arm64: dts: renesas: ulcb: Add EthernetAVB PHY reset
  • From: Geert Uytterhoeven
• [PATCH v4 2/4] macb: Kill PHY reset code
  • From: Geert Uytterhoeven
• [PATCH v4 0/4] Teach phylib hard-resetting devices
  • From: Geert Uytterhoeven
• [PATCH v4 3/4] arm64: dts: renesas: salvator-common: Add EthernetAVB PHY reset
  • From: Geert Uytterhoeven
• Re: [PATCH 2/2] arm64: dts: renesas: r8a77970: use SYSC power domain macros
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] arm64: dts: renesas: r8a77970: use CPG core clock macros
  • From: Geert Uytterhoeven
• Re: [PATCH v8 23/28] rcar-vin: parse Gen3 OF and setup media graph
  • From: Hans Verkuil
• Re: [PATCH v8 28/28] rcar-vin: enable support for r8a77970
  • From: Hans Verkuil
• Re: [PATCH v8 04/28] rcar-vin: move subdevice handling to async callbacks
  • From: Hans Verkuil
• Re: [PATCH/RFC 5/5] ARM: shmobile: defconfig: Disable CONFIG_EMBEDDED
  • From: Geert Uytterhoeven
• Re: [PATCH v8 03/28] rcar-vin: unregister video device on driver removal
  • From: Hans Verkuil
• Re: [PATCH v8 02/28] rcar-vin: rename poorly named initialize and cleanup functions
  • From: Hans Verkuil
• Re: [PATCH 5/9] v4l: vsp1: Document the vsp1_du_atomic_config structure
  • From: Sergei Shtylyov
• Re: [PATCH] v4l: rcar-vin: Implement V4L2 video node release handler
  • From: Hans Verkuil