Re: [PATCH v10 15/30] rcar-vin: break out format alignment and checking

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Niklas,

Thank you for the patch.

On Monday, 29 January 2018 18:34:20 EET Niklas Söderlund wrote:
> Part of the format alignment and checking can be shared with the Gen3
> format handling. Break that part out to a separate function.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> ---
>  drivers/media/platform/rcar-vin/rcar-v4l2.c | 93 +++++++++++++-----------
>  1 file changed, 50 insertions(+), 43 deletions(-)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> b/drivers/media/platform/rcar-vin/rcar-v4l2.c index
> c606942e59b5d934..1169e6a279ecfb55 100644
> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> @@ -86,6 +86,55 @@ static u32 rvin_format_sizeimage(struct v4l2_pix_format
> *pix) return pix->bytesperline * pix->height;
>  }
> 
> +static int rvin_format_align(struct rvin_dev *vin, struct v4l2_pix_format
> *pix)
> +{
> +	u32 walign;
> +
> +	/* If requested format is not supported fallback to the default */
> +	if (!rvin_format_from_pixel(pix->pixelformat)) {
> +		vin_dbg(vin, "Format 0x%x not found, using default 0x%x\n",
> +			pix->pixelformat, RVIN_DEFAULT_FORMAT);

I think you can drop the message.

> +		pix->pixelformat = RVIN_DEFAULT_FORMAT;
> +	}
> +
> +	/* Reject ALTERNATE  until support is added to the driver */
> +	switch (pix->field) {
> +	case V4L2_FIELD_TOP:
> +	case V4L2_FIELD_BOTTOM:
> +	case V4L2_FIELD_NONE:
> +	case V4L2_FIELD_INTERLACED_TB:
> +	case V4L2_FIELD_INTERLACED_BT:
> +	case V4L2_FIELD_INTERLACED:
> +		break;
> +	default:
> +		pix->field = V4L2_FIELD_NONE;
> +		break;
> +	}
> +
> +	/* HW limit width to a multiple of 32 (2^5) for NV16 else 2 (2^1) */
> +	walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
> +
> +	/* Limit to VIN capabilities */
> +	v4l_bound_align_image(&pix->width, 2, vin->info->max_width, walign,
> +			      &pix->height, 4, vin->info->max_height, 2, 0);
> +
> +	pix->bytesperline = max_t(u32, pix->bytesperline,
> +				  rvin_format_bytesperline(pix));
> +	pix->sizeimage = max_t(u32, pix->sizeimage,
> +			       rvin_format_sizeimage(pix));
> +
> +	if (vin->info->model == RCAR_M1 &&
> +	    pix->pixelformat == V4L2_PIX_FMT_XBGR32) {
> +		vin_err(vin, "pixel format XBGR32 not supported on M1\n");
> +		return -EINVAL;

This shouldn't print a message nor return an error, but default to a supported 
format. You can move the check to the beginning of the function to do so.

> +	}
> +
> +	vin_dbg(vin, "Format %ux%u bpl: %d size: %d\n",
> +		pix->width, pix->height, pix->bytesperline, pix->sizeimage);
> +
> +	return 0;
> +}
> +
>  /*
> ---------------------------------------------------------------------------
> -- * V4L2
>   */
> @@ -215,19 +264,12 @@ static int __rvin_try_format_source(struct rvin_dev
> *vin, static int __rvin_try_format(struct rvin_dev *vin,
>  			     u32 which, struct v4l2_pix_format *pix)
>  {
> -	u32 walign;
>  	int ret;
> 
>  	/* Keep current field if no specific one is asked for */
>  	if (pix->field == V4L2_FIELD_ANY)
>  		pix->field = vin->format.field;
> 
> -	/* If requested format is not supported fallback to the default */
> -	if (!rvin_format_from_pixel(pix->pixelformat)) {
> -		vin_dbg(vin, "Format 0x%x not found, using default 0x%x\n",
> -			pix->pixelformat, RVIN_DEFAULT_FORMAT);
> -		pix->pixelformat = RVIN_DEFAULT_FORMAT;
> -	}
> 
>  	/* Always recalculate */
>  	pix->bytesperline = 0;
> @@ -238,42 +280,7 @@ static int __rvin_try_format(struct rvin_dev *vin,
>  	if (ret)
>  		return ret;
> 
> -	/* Reject ALTERNATE  until support is added to the driver */
> -	switch (pix->field) {
> -	case V4L2_FIELD_TOP:
> -	case V4L2_FIELD_BOTTOM:
> -	case V4L2_FIELD_NONE:
> -	case V4L2_FIELD_INTERLACED_TB:
> -	case V4L2_FIELD_INTERLACED_BT:
> -	case V4L2_FIELD_INTERLACED:
> -		break;
> -	default:
> -		pix->field = V4L2_FIELD_NONE;
> -		break;
> -	}
> -
> -	/* HW limit width to a multiple of 32 (2^5) for NV16 else 2 (2^1) */
> -	walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
> -
> -	/* Limit to VIN capabilities */
> -	v4l_bound_align_image(&pix->width, 2, vin->info->max_width, walign,
> -			      &pix->height, 4, vin->info->max_height, 2, 0);
> -
> -	pix->bytesperline = max_t(u32, pix->bytesperline,
> -				  rvin_format_bytesperline(pix));
> -	pix->sizeimage = max_t(u32, pix->sizeimage,
> -			       rvin_format_sizeimage(pix));
> -
> -	if (vin->info->model == RCAR_M1 &&
> -	    pix->pixelformat == V4L2_PIX_FMT_XBGR32) {
> -		vin_err(vin, "pixel format XBGR32 not supported on M1\n");
> -		return -EINVAL;
> -	}
> -
> -	vin_dbg(vin, "Format %ux%u bpl: %d size: %d\n",
> -		pix->width, pix->height, pix->bytesperline, pix->sizeimage);
> -
> -	return 0;
> +	return rvin_format_align(vin, pix);
>  }
> 
>  static int rvin_querycap(struct file *file, void *priv,

-- 
Regards,

Laurent Pinchart





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux