在 2018/2/27 21:55, Phil Edworthy 写道:
Since the controller does not support the end-of-busy IRQ, don't use it.
Otherwise, on older SD cards you will get lots of these messages:
"mmc0: Got data interrupt 0x00000002 even though no data operation was in progress"
I'm afraid you have to explain which version of arasan's IP suffer from
this and what does the "older SD cards" mean?
This has been reported on Xilinx devices that also use the Arasan IP.
See https://patchwork.kernel.org/patch/8062871/
This has been tested on the Renesas RZ/ND-DB board with the RZ/N1 SoC.
Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
---
drivers/mmc/host/sdhci-of-arasan.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index c33a5f7..ab66e32 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -290,7 +290,8 @@ static const struct sdhci_pltfm_data sdhci_arasan_pdata = {
.ops = &sdhci_arasan_ops,
.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
- SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN,
+ SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
+ SDHCI_QUIRK2_STOP_WITH_TC,
};
static u32 sdhci_arasan_cqhci_irq(struct sdhci_host *host, u32 intmask)
--
Best Regards
Shawn Lin
