This series adds the plain basic support for booting a bare kernel on the RZ/N1D-DB Board. It's been trimmed to the strict minimum as a 'base', further patches that will add the rest of the support, pinctrl, clock architecture and quite a few others. Michel Pollet (2): arm: add basic support for Renesas RZ/N1 boards arm: rzn1: Add basic support for RZN1D-DB Board Documentation/devicetree/bindings/arm/shmobile.txt | 5 +- arch/arm/boot/dts/rzn1.dtsi | 94 +++ arch/arm/boot/dts/rzn1d400-db.dts | 25 + arch/arm/mach-shmobile/Kconfig | 5 + arch/arm/mach-shmobile/Makefile | 1 + arch/arm/mach-shmobile/setup-r9a06g032.c | 60 ++ .../dt-bindings/interrupt-controller/rzn1-irq.h | 137 ++++ include/dt-bindings/soc/renesas,rzn1-map.h | 173 +++++ include/soc/rzn1/sysctrl.h | 736 +++++++++++++++++++++ 9 files changed, 1235 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/rzn1.dtsi create mode 100644 arch/arm/boot/dts/rzn1d400-db.dts create mode 100644 arch/arm/mach-shmobile/setup-r9a06g032.c create mode 100644 include/dt-bindings/interrupt-controller/rzn1-irq.h create mode 100644 include/dt-bindings/soc/renesas,rzn1-map.h create mode 100644 include/soc/rzn1/sysctrl.h -- 2.7.4
