Re: [PATCH] ARM: dts: porter: Add missing PMIC nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Feb 18, 2018 at 04:07:51PM +0100, Geert Uytterhoeven wrote:
> Hi Marek,
> 
> CC Steve Twiss
> 
> On Sat, Feb 17, 2018 at 3:07 AM, Marek Vasut <marek.vasut@xxxxxxxxx> wrote:
> > Add PMIC nodes to Porter and connect CPU DVFS supply. There is
> > one DA9063 and one DA9210 on Porter, the only difference from
> > the other boards is that DA9063 is at I2C address 0x5a rather
> > than 0x58 .
> >
> > Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
> 
> Thanks for your patch!
> 
> > --- a/arch/arm/boot/dts/r8a7791-porter.dts
> > +++ b/arch/arm/boot/dts/r8a7791-porter.dts
> > @@ -354,10 +354,47 @@
> >         clock-frequency = <400000>;
> >  };
> >
> > +&i2c6 {
> > +       status = "okay";
> > +       clock-frequency = <100000>;
> > +
> > +       pmic@5a {
> > +               compatible = "dlg,da9063";
> 
> Does it matter that this is a DA9063L ("Variant 6B")?
> Do we need a new compatible value, or can this be detected at runtime?

Hi Marek,

could you follow up on this?

> > +               reg = <0x5a>;
> > +               interrupt-parent = <&irqc0>;
> > +               interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> > +               interrupt-controller;
> > +
> > +               rtc {
> > +                       compatible = "dlg,da9063-rtc";
> > +               };
> > +
> > +               wdt {
> > +                       compatible = "dlg,da9063-watchdog";
> > +               };
> > +       };
> > +
> > +       vdd_dvfs: regulator@68 {
> > +               compatible = "dlg,da9210";
> > +               reg = <0x68>;
> > +               interrupt-parent = <&irqc0>;
> > +               interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> > +
> > +               regulator-min-microvolt = <1000000>;
> > +               regulator-max-microvolt = <1000000>;
> > +               regulator-boot-on;
> > +               regulator-always-on;
> > +       };
> > +};
> > +
> >  &sata0 {
> >         status = "okay";
> >  };
> >
> > +&cpu0 {
> > +       cpu0-supply = <&vdd_dvfs>;
> > +};
> > +
> >  /* composite video input */
> >  &vin0 {
> >         status = "okay";
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds
> 



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux