[PATCH v2] v4l: vsp1: Print the correct blending unit name in debug messages

[Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>]

The DRM pipelines can use either the BRU or the BRS for blending. Make
sure the right name is used in debugging messages to avoid confusion.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
Changes since v1:

- Create a macro to get the right entity name instead of duplicating the
  same code all over the driver
---
 drivers/media/platform/vsp1/vsp1_drm.c | 21 ++++++++-------------
 1 file changed, 8 insertions(+), 13 deletions(-)

diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
index ac85942162c1..b8fee1834253 100644
--- a/drivers/media/platform/vsp1/vsp1_drm.c
+++ b/drivers/media/platform/vsp1/vsp1_drm.c
@@ -27,6 +27,7 @@
 #include "vsp1_pipe.h"
 #include "vsp1_rwpf.h"
 
+#define BRU_NAME(e)	(e)->type == VSP1_ENTITY_BRU ? "BRU" : "BRS"
 
 /* -----------------------------------------------------------------------------
  * Interrupt Handling
@@ -88,7 +89,6 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
 	struct vsp1_entity *next;
 	struct vsp1_dl_list *dl;
 	struct v4l2_subdev_format format;
-	const char *bru_name;
 	unsigned long flags;
 	unsigned int i;
 	int ret;
@@ -99,7 +99,6 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
 	drm_pipe = &vsp1->drm->pipe[pipe_index];
 	pipe = &drm_pipe->pipe;
 	bru = to_bru(&pipe->bru->subdev);
-	bru_name = pipe->bru->type == VSP1_ENTITY_BRU ? "BRU" : "BRS";
 
 	if (!cfg) {
 		/*
@@ -165,7 +164,7 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
 
 		dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on %s pad %u\n",
 			__func__, format.format.width, format.format.height,
-			format.format.code, bru_name, i);
+			format.format.code, BRU_NAME(pipe->bru), i);
 	}
 
 	format.pad = pipe->bru->source_pad;
@@ -181,7 +180,7 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
 
 	dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on %s pad %u\n",
 		__func__, format.format.width, format.format.height,
-		format.format.code, bru_name, i);
+		format.format.code, BRU_NAME(pipe->bru), i);
 
 	format.pad = RWPF_PAD_SINK;
 	ret = v4l2_subdev_call(&pipe->output->entity.subdev, pad, set_fmt, NULL,
@@ -473,9 +472,9 @@ static int vsp1_du_setup_rpf_pipe(struct vsp1_device *vsp1,
 	if (ret < 0)
 		return ret;
 
-	dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on BRU pad %u\n",
+	dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on %s pad %u\n",
 		__func__, format.format.width, format.format.height,
-		format.format.code, format.pad);
+		format.format.code, BRU_NAME(pipe->bru), format.pad);
 
 	sel.pad = bru_input;
 	sel.target = V4L2_SEL_TGT_COMPOSE;
@@ -486,10 +485,9 @@ static int vsp1_du_setup_rpf_pipe(struct vsp1_device *vsp1,
 	if (ret < 0)
 		return ret;
 
-	dev_dbg(vsp1->dev,
-		"%s: set selection (%u,%u)/%ux%u on BRU pad %u\n",
+	dev_dbg(vsp1->dev, "%s: set selection (%u,%u)/%ux%u on %s pad %u\n",
 		__func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height,
-		sel.pad);
+		BRU_NAME(pipe->bru), sel.pad);
 
 	return 0;
 }
@@ -514,12 +512,9 @@ void vsp1_du_atomic_flush(struct device *dev, unsigned int pipe_index)
 	struct vsp1_entity *entity;
 	struct vsp1_entity *next;
 	struct vsp1_dl_list *dl;
-	const char *bru_name;
 	unsigned int i;
 	int ret;
 
-	bru_name = pipe->bru->type == VSP1_ENTITY_BRU ? "BRU" : "BRS";
-
 	/* Prepare the display list. */
 	dl = vsp1_dl_list_get(pipe->output->dlm);
 
@@ -570,7 +565,7 @@ void vsp1_du_atomic_flush(struct device *dev, unsigned int pipe_index)
 		rpf->entity.sink_pad = i;
 
 		dev_dbg(vsp1->dev, "%s: connecting RPF.%u to %s:%u\n",
-			__func__, rpf->entity.index, bru_name, i);
+			__func__, rpf->entity.index, BRU_NAME(pipe->bru), i);
 
 		ret = vsp1_du_setup_rpf_pipe(vsp1, pipe, rpf, i);
 		if (ret < 0)
-- 
Regards,

Laurent Pinchart