Hi Jacopo,
On Thursday, 22 February 2018 14:36:00 EET jacopo mondi wrote:
> On Thu, Feb 22, 2018 at 02:14:53PM +0200, Laurent Pinchart wrote:
> > On Thursday, 22 February 2018 14:04:12 EET jacopo mondi wrote:
> >> On Wed, Feb 21, 2018 at 10:28:06PM +0200, Laurent Pinchart wrote:
> >>> On Tuesday, 20 February 2018 10:58:57 EET jacopo mondi wrote:
[snip]
> >>>> This actually makes me wonder if those informations (ycbcb_enc,
> >>>> quantization and xfer_func) shouldn't actually be part of the
> >>>> supported format list... I blindly added those default fields in the
> >>>> try_fmt function, but I doubt they applies to all supported formats.
> >>>>
> >>>> Eg. the sensor supports YUYV as well as 2 RGB encodings (RGB444 and
> >>>> RGB 565) and 1 raw format (BGGR). I now have a question here:
> >>>>
> >>>> 1) ycbcr_enc transforms non-linear R'G'B' to Y'CbCr: does this
> >>>> applies to RGB and raw formats? I don't think so, and what value is
> >>>> the correct one for the ycbcr_enc field in this case? I assume
> >>>> xfer_func and quantization applies to all formats instead..
> >>>
> >>> There's no encoding for RGB formats if I understand things correctly,
> >>> so I'd set ycbcr_enc to V4L2_YCBCR_ENC_DEFAULT. The transfer function
> >>> and the quantization apply to all formats, but I'd be surprised to find
> >>> a sensor outputting limited range for RGB.
> >>
> >> Ack, we got the same understanding for RGB formats. I wonder if for
> >> those formats we wouldn't need a V4L2_YCBCR_ENC_NONE or similar...
> >
> > That, or explicitly documenting that when the format is not YUV the field
> > should be set by both drivers and applications to V4L2_YCBCR_ENC_DEFAULT
> > when written and ignored when read.
>
> Well, if no encoding is performed because the color encoding scheme is
> RGB, the colorspace does anyway define an encoding method, so it seems
> to me the latter is more appropriate (use DEFAULT and ignore when read).
>
> That's anyway just my opinion, but I could send a patch for
> documentation and see what feedback it gets.
>
> >>> Have you been able to check whether the sensor outputs limited range
> >>> of full range YUV ? If it outputs full range you can hardcode
> >>> quantization to V4L2_QUANTIZATION_FULL_RANGE for all formats.
> >>
> >> In YUYV mode, I see values > 0xf0 ( > 240, which is the max value for
> >> CbCr samples in limited quantization range), so I assume quantization
> >> is full range.
> >
> > It should be, yes. What's the minimum and maximum values you get ?
>
> From a white surface:
> min = 0x39
> max = 0xfc
>
> From a black surface:
> min = 0x00 (with 62 occurrences)
> max = 0x8b
>
> I guess that's indeed full range quantization
Could you check Y and UV separately ?
#!/usr/bin/python
import sys
def main(argv):
if len(argv) != 2:
print('Usage: %s <file>' % argv[0])
return 1
data = open(argv[1], 'rb').read()
y_min = 255
y_max = 0
uv_min = 255
uv_max = 0
for i in range(len(data) // 2):
y = data[2*i]
uv = data[2*i]
y_min = min(y_min, y)
y_max = max(y_max, y)
uv_min = min(uv_min, uv)
uv_max = max(uv_max, uv)
print('Y [%u, %u] UV [%u, %u]' % (y_min, y_max, uv_min, uv_max))
return 0
if __name__ == '__main__':
sys.exit(main(sys.argv))
> > > Actually the hardest part here was having a white enough surface to
> > > point the sensor to :)
> >
> > Pointing a flashlight to the sensor usually does the trick.
>
> I had a yellowish light that didn't work that well, I ended up putting
> a white paper sheet in front of it and then took the picture.
Time to get a white flashlight ? :-)
--
Regards,
Laurent Pinchart
