On Tue, 2018-02-27 at 14:56 +0200, Ville Syrjala wrote: > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > > Currently we have a mix of static and dynamic information stored in > the display info structure. That makes it rather difficult to repopulate > the dynamic parts when a new EDID appears. Let's make life easier by > splitting the structure up into static and dynamic parts. > > The static part will consist of subpixel_order, panel_orientation, > and bus_formats. > > Actually I'm not sure where bus_formats & co. fit in all this. For some > drivers those seem to be static, even though they might fill them out > from .get_modes(). > > For other drivers this stuff even gets frobbed at > runtime, making it more some kind of a bastard encoder/connector state. > I'll just stick it into the static side so that the behaviour doesn't > change when I start clear out the entire dynamic state with memset(). [...] > drivers/gpu/drm/imx/imx-ldb.c | 4 +- > drivers/gpu/drm/imx/parallel-display.c | 2 +- For imx-drm, Acked-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> regards Philipp
