Hi Michel,
On Mon, Feb 26, 2018 at 1:18 PM, Michel Pollet
<michel.pollet@xxxxxxxxxxxxxx> wrote:
> Only enables the uart0 for now, and also relies on the bootloader
> for setting up the clocks and pinctrl.
>
> Signed-off-by: Michel Pollet <michel.pollet@xxxxxxxxxxxxxx>
Thanks for your patch!
This should be split in two parts:
> Documentation/devicetree/bindings/arm/shmobile.txt | 2 ++
1. DT bindings
> arch/arm/boot/dts/rzn1d400-db.dts | 25 ++++++++++++++++++++++
2. Board DTS + (missing) arch/arm/boot/dts/Makefile update.
> --- /dev/null
> +++ b/arch/arm/boot/dts/rzn1d400-db.dts
Why the 400? 400-pin package?
Please follow <SoC>-<board>.dts naming convention, i.e.
r9a06g032-rzn1d-db.dts
> @@ -0,0 +1,25 @@
> +/*
> + * Device Tree Source for the RZN1D-DB Board
> + *
> + * Copyright (C) 2018 Renesas Electronics Europe Limited
> + *
> + * SPDX-License-Identifier: GPL-2.0
> + */
> +
> +/dts-v1/;
> +
> +#include "rzn1.dtsi"
> +
> +/ {
> + model = "RZN1D-DB Board";
> + compatible = "renesas,rzn1d-db", "renesas,r9a06g032";
> +
> + chosen {
> + bootargs = "console=ttyS0,115200";
"console=" is not needed, as it is handled by stdout-path these days,
so you can remove bootargs for now.
> + stdout-path = &uart0;
stdout-path = "serial0:115200n8";
Please move the serial0 alias definition to the board DTS, as labeling
of serial ports
is board-specific.
> + linux,stdout-path = &uart0;
linux,stdout-path is deprecated, please remove it.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
