Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH v2 05/11] OMAP2/3 clock: add _omap2_clk_{read,write}_reg()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 03/11] OMAP2 clock: add clk.prcm_mod field; annotate OMAP2xxx clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 02/11] OMAP2/3 clock: shorten some variable names in clock.c for legibility
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 01/11] OMAP3 clock: split mcbspX_src_fck from mcbspX_fck
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 00/11] OMAP2/3 clock: encode prcm_mod for each struct clk
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] watchdog: another ioremap() fix
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: another ioremap() fix
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: OMAP support in mainline?
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: OMAP support in mainline?
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH v2 6/7] OMAP3 clock: DPLLs should enter bypass if new rate is sys_ck
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 7/7] OMAP3 clock: recalculate DPLL subtree after bypass entry/exit
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 4/7] OMAP3 clock: move DPLL bypass rate calculation into omap2_get_dpll_rate()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 5/7] OMAP3 clock: omap3_clkoutx2_recalc() should test DPLL IDLEST to determine if DPLL is bypassed
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 3/7] OMAP3 clock: note the bypass source clock for DPLLs
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 2/7] OMAP3 clock: add idlest_reg, idlest_mask for DPLL3
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 1/7] OMAP3 clock: convert dpll_data.idlest_bit to idlest_mask
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 0/7] OMAP2/3 clock: revise DPLL bypass handling in clock tree
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH PM-0 v2] ARM: OMAP3: HSMMC: Ensure HSMMC is fully reset on boot
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH] watchdog: another ioremap() fix
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: OMAP support in mainline?
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH PM-0] ARM: OMAP3: HSMMC: Ensure HSMMC is fully reset on boot
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH] omapfb: Remove casting and change coding style
  • From: "arun c" <arun.edarath@xxxxxxxxx>
• Re: [PATCH PM-0] ARM: OMAP3: HSMMC: Ensure HSMMC is fully reset on boot
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• Re: [PATCH PM-0] ARM: OMAP3: HSMMC: Ensure HSMMC is fully reset on boot
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH PM-0] ARM: OMAP3: HSMMC: Ensure HSMMC is fully reset on boot
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: OMAP support in mainline?
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH]TWL4030 battery driver madc str fix
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• RE: OMAP support in mainline?
  • From: Igor Stoppa <igor.stoppa@xxxxxxxxx>
• RE: OMAP support in mainline?
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: OMAP support in mainline?
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: OMAP support in mainline?
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• RE: OMAP support in mainline?
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: OMAP support in mainline?
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: getting 2.6.25 from git to run on omap35x evm
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: [PATCH]TWL4030 battery driver madc str fix
  • From: "Pakaravoor, Jagadeesh" <j-pakaravoor@xxxxxx>
• Re: [PATCH] Re: omap-sdp3430_Rotation patch
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH]TWL4030 battery driver madc str fix
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• [PATCH PM-0] OMAP3: PM: Remove extra prcm save from idle loop
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• RE: getting 2.6.25 from git to run on omap35x evm
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH] Re: omap-sdp3430_Rotation patch
  • From: "arun c" <arun.edarath@xxxxxxxxx>
• Re: getting 2.6.25 from git to run on omap35x evm
  • From: "Ashwin Bihari" <abihari@xxxxxxxxx>
• Re: OMAP support in mainline?
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: getting 2.6.25 from git to run on omap35x evm
  • From: twebb <taliaferro62@xxxxxxxxx>
• Re: getting 2.6.25 from git to run on omap35x evm
  • From: "Ashwin Bihari" <abihari@xxxxxxxxx>
• Re: getting 2.6.25 from git to run on omap35x evm
  • From: twebb <taliaferro62@xxxxxxxxx>
• Re: getting 2.6.25 from git to run on omap35x evm
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• getting 2.6.25 from git to run on omap35x evm
  • From: twebb <taliaferro62@xxxxxxxxx>
• [PATCH omapzoom tree] Fix keypad for LDP
  • From: "Curran, Dominic" <dcurran@xxxxxx>
• Re: OMAP support in mainline?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP support in mainline?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] Re: omap-sdp3430_Rotation patch
  • From: nskamat@xxxxxx
• RE: [PATCH] OMAP 2/3 V4L2 display driver on video planes
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH] OMAP 2/3 V4L2 display driver on video planes
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxx>
• [PATCH] debobs support for OMAP3430.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH] Add debobs Kconfig item
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH] Add definitions for ETK pads and debobs registers
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH] Debobs and ETK padconf implementation
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: OMAP support in mainline?
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/29] PM: proposed branch for PM collaboration
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: OMAP support in mainline?
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: [PATCH] alsa: add Beagleboard SoC configuration.
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: [PATCH PM-0] OMAP3: I2C: Implement i2c save/restore
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH PM-0] OMAP3: I2C: Implement i2c save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH PM-0] OMAP3: I2C: Implement i2c save/restore
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• Re: [PREVIEW] New display subsystem for OMAP2/3
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PATCH 0/3] OMAP2/3 clock: encode prcm_mod for each struct clk
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Clean-up MMC device init (Was: [PATCH]Enable 4-bit in HSMMC1 and HSMMC2 platform data)
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PREVIEW] New display subsystem for OMAP2/3
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: OMAP support in mainline?
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: OMAP support in mainline?
  • From: Kalle Valo <kalle.valo@xxxxxxxxx>
• Re: [PATCH] alsa: add Beagleboard SoC configuration.
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: OMAP support in mainline?
  • From: "Budhee Jamaich" <budheej@xxxxxxxxx>
• Re: OMAP support in mainline?
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: OMAP support in mainline?
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Clean-up MMC device init (Was: [PATCH]Enable 4-bit in HSMMC1 and HSMMC2 platform data)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] OMAP2/3 clock: encode prcm_mod for each struct clk
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP support in mainline?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Clean-up MMC device init (Was: [PATCH]Enable 4-bit in HSMMC1 and HSMMC2 platform data)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] alsa: add Beagleboard SoC configuration.
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: OMAP support in mainline?
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/29] PM: proposed branch for PM collaboration
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• [DSP BRIDGE] Bridge overview document and DSP Application guide
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: [PATCH] PM debug support for 34xx
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5/5] OMAP3 clock: add wait for USIM module to become active
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 3/5] OMAP2/3 clock: encode target IDLEST bits and clean omap2_clk_wait_ready()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 4/5] OMAP2/3 clock: convert omap2_clk_wait_ready() to use the idlest_bit field
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/5] OMAP2/3 PRCM: convert IDLEST register bit macros to use the _SHIFT/_MASK style
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/5] OMAP2 PRCM: fix CM_IDLEST bits incorrectly marked as 2xxx-common
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/5] OMAP2/3 clock: revise module idlest handling
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: OMAP support in mainline?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH]Add 3430 SDP board level support for HSMMC2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• OMAP support in mainline?
  • From: Kalle Valo <kalle.valo@xxxxxxxxx>
• RE: [PATCH] PM debug support for 34xx
  • From: <Tero.Kristo@xxxxxxxxx>
• RE: [PATCH] PM: Added sleep support to UART
  • From: <Tero.Kristo@xxxxxxxxx>
• [PATCH] PM: Added sleep support to UART
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH] PM: Fixed clockdomain state control for OMAP3
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 5/5] OMAP SSI API documentation
  • From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
• [PATCH 4/5] OMAP SSI integration into misc drivers
  • From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
• [PATCH 3/5] OMAP SSI driver code
  • From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
• [PATCH 2/5] OMAP SSI driver interface
  • From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
• [PATCH 1/5] OMAP SSI hardware interface definitions
  • From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
• [PATCH 0/5] RFC: OMAP Synchronous Serial Interface (SSI) driver
  • From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
• RE: Question about timers used in dsp bridge
  • From: "Ramesh Gupta Guntha" <x0023949@xxxxxx>
• [PATCH 2/3] OMAP2/3 clock: shorten some variable names in clock.c for legibility
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/3] OMAP3 clock: split mcbspX_src_fck from mcbspX_fck
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/3] OMAP2/3 clock: encode prcm_mod for each struct clk
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 0/29] PM: proposed branch for PM collaboration
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: GPIO: Enable debounce clock only when debounce is enabled v3.
  • From: Paul Walmsley <paul@xxxxxxxxxxx>
• [PATCH] ARM: OMAP: Add RX/TX interrupts for 2430 and 34xx McBSP ports 3-5
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• [PATCH] OMAP3: GPIO: Enable debounce clock only when debounce is enabled v3.
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• Re: [PATCH] OMAP3: GPIO: Enable debounce clock only when debounce is enabled v2.
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] OMAP3: GPIO: Enable debounce clock only when debounce is enabled v2.
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• [PATCH] Fix build for beagleboard
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: Question about timers used in dsp bridge
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• Re: [PATCH] OMAP3: GPIO: Enable debounce clock only when debounce is enabled v2.
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 6/6] OMAP3 clock: recalculate DPLL subtree after bypass entry/exit
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 5/6] OMAP3 clock: DPLLs should enter bypass if new rate is sys_ck
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 4/6] OMAP3 clock: omap3_clkoutx2_recalc() should test DPLL IDLEST to determine if DPLL is bypassed
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 3/6] OMAP2/3 clock: move DPLL bypass rate calculation into omap2_get_dpll_rate()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/6] OMAP3 clock: add idlest_reg, idlest_mask for DPLL3
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/6] OMAP2/3 clock: convert dpll_data.idlest_bit to idlest_mask
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/6] OMAP2/3 clock: revise DPLL bypass handling in clock tree
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] OMAP3: GPIO: Enable debounce clock only when debounce is enabled v2.
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• OMAP3 CPU revision fix
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH] Fixed OMAP3 version check
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [Resend][PATCH - Omapzoom][NAND] Add prefetch and DMA support
  • From: "vimal singh" <vimalsingh@xxxxxx>
• [PATCH 2/3] Debobs and ETK padconf implementation
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 1/3] Add definitions for ETK pads and debobs registers
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 3/3] Add debobs Kconfig item
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 0/3] debobs support for OMAP3430.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: [PATCH] OMAP3: GPIO: Enable debounce clock only when debounce is enabled
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: Question about timers used in dsp bridge
  • From: "Ramesh Gupta Guntha" <x0023949@xxxxxx>
• [Resend][PATCH - Omapzoom][NAND] Add prefetch and DMA support
  • From: "vimal singh" <vimalsingh@xxxxxx>
• Question about timers used in dsp bridge
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• Re: [PATCH 04/12] I2C re-init for every cmd
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• [PATCH] Debobs and ETK padconf implementation
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH] Add definitions for ETK pads and debobs registers
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH] debobs support for OMAP3430
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH] Add debobs Kconfig item
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: [PATCH 04/12] I2C re-init for every cmd
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH] OMAP3 IRQ: add some missing IRQs for secure peripherals
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: omap-sdp3430_Rotation patch
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH]Add 3430 SDP board level support for HSMMC2
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• Re: omap-sdp3430_Rotation patch
  • From: "arun c" <arun.edarath@xxxxxxxxx>
• RE: omap-sdp3430_Rotation patch
  • From: "K, Rajesh" <krajesh@xxxxxx>
• Re: omapfb: help from userspace
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: omapfb: help from userspace
  • From: "Felipe Contreras" <felipe.contreras@xxxxxxxxx>
• Re: [PREVIEW] New display subsystem for OMAP2/3
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [patch] kill compile warning on twl4030-power.c
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [patch] kill compile warning on twl4030-power.c
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [patch] kill compile warning on twl4030-power.c
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: [patch] kill compile warning on twl4030-power.c
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [patch] kill compile warning on twl4030-power.c
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: [patch] kill compile warning on twl4030-power.c
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [patch] kill compile warning on twl4030-power.c
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• RE: [PREVIEW] New display subsystem for OMAP2/3
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [patch] kill compile warning on twl4030-power.c
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [patch] kill compile warning on twl4030-power.c
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• RE: [PREVIEW] New display subsystem for OMAP2/3
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• omapfb: help from userspace
  • From: "Felipe Contreras" <felipe.contreras@xxxxxxxxx>
• RE: [PREVIEW] New display subsystem for OMAP2/3
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PREVIEW] New display subsystem for OMAP2/3
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PREVIEW] New display subsystem for OMAP2/3
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PREVIEW] New display subsystem for OMAP2/3
  • From: Daniel Stone <daniel.stone@xxxxxxxxx>
• Re: [PATCH 00/10] Patches for fixing the lowmem module
  • From: Viktor Rosendahl <Viktor.Rosendahl@xxxxxxxxx>
• RE: [PREVIEW] New display subsystem for OMAP2/3
  • From: "Shah, Hardik" <hardik.shah@xxxxxx>
• RE: [PREVIEW] New display subsystem for OMAP2/3
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: omap-sdp3430_Rotation patch
  • From: "arun c" <arun.edarath@xxxxxxxxx>
• Re: omap3evm .27rc6 and ethernet
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: omap3evm .27rc6 and ethernet
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] MUSB: fix memory corruption when using more than max endpoints
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH] OMAP3: GPIO: Enable debounce clock only when debounce is enabled
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• RE: [PREVIEW] New display subsystem for OMAP2/3
  • From: "Shah, Hardik" <hardik.shah@xxxxxx>
• Re: [PATCH 04/12] I2C re-init for every cmd
  • From: "shekhar, chandra" <x0044955@xxxxxx>
• [PATCH] BRIDGE: Clean up include file duplication
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH] ARM: OMAP: Clean up header file duplication
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• omap3evm .27rc6 and ethernet
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• RE: [patch] omap: usb: ehci: fix use of hcd->regs
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH] ARM:OMAP2: follow new twl4030 RTC init convention in Overo board file
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• [PATCH] ARM:OMAP2: Add OVERO_GPIO_BT_XGATE to Overo board init
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: [PREVIEW] New display subsystem for OMAP2/3
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PREVIEW] New display subsystem for OMAP2/3
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/7][OMAP 3/4+] BRIDGE: set 0 for phys_mempool_* as default
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 7/7][OMAP 3/4+] BRIDGE: set 0 for phys_mempool_* as default
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Clean-up MMC device init (Was: [PATCH]Enable 4-bit in HSMMC1 and HSMMC2 platform data)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Clean-up MMC device init (Was: [PATCH]Enable 4-bit in HSMMC1 and HSMMC2 platform data)
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/7][OMAP 3/4+] BRIDGE: Module ISR removed
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 7/7][OMAP 3/4+] BRIDGE: set 0 for phys_mempool_* as default
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 7/7][OMAP 3/4+] BRIDGE: set 0 for phys_mempool_* as default
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 7/7][OMAP 3/4+] BRIDGE: set 0 for phys_mempool_* as default
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• RE: [PATCH 7/7][OMAP 3/4+] BRIDGE: set 0 for phys_mempool_* as default
  • From: "Ramirez Luna, Omar" <x00omar@xxxxxx>
• [PATCH 7/7][OMAP 3/4+] BRIDGE: set 0 for phys_mempool_* as default
  • From: "Ramirez Luna, Omar" <x00omar@xxxxxx>
• [PATCH 6/7][OMAP 3/4+] BRIDGE: PRCS wrappers removal
  • From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
• [PATCH 5/7][OMAP 3/4+] BRIDGE MMUfault infinite timeout fix
  • From: "Ramirez Luna, Omar" <x00omar@xxxxxx>
• [PATCH 4/7][OMAP 3/4+] BRIDGE tiomap unmap fix
  • From: "Ramirez Luna, Omar" <x00omar@xxxxxx>
• [PATCH 3/7][OMAP 3/4+] BRIDGE GT mask for DSP traces
  • From: "Ramirez Luna, Omar" <x00omar@xxxxxx>
• [PATCH 2/7][OMAP 3/4+] BRIDGE Remove CDECL macro
  • From: "Ramirez Luna, Omar" <x00omar@xxxxxx>
• [PATCH 1/7][OMAP 3/4+] BRIDGE: Module ISR removed
  • From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
• Re: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP2: Fix definition of SGX clock register bits
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ASoC: OMAP: Fix Gumstix Overo machine driver by using snd_soc_dai struct (rev 2)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch] omap: usb: ehci: fix use of hcd->regs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omapfb: use proper bits per pixel for beagleboard.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 00/12] Update OMAP2/3 powerdomains, clockdomains
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] omapfb: use proper bits per pixel for beagleboard.
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• RE: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH] ASoC: OMAP: Fix Gumstix Overo machine driver by using snd_soc_dai struct (rev 2)
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: [PATCH] ASoC: OMAP: Fix Gumstix Overo machine driver by using snd_soc_dai struct
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: [PATCH] ASoC: OMAP: Fix Gumstix Overo machine driver by using snd_soc_dai struct
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH] ASoC: OMAP: Fix Gumstix Overo machine driver by using snd_soc_dai struct
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [rfc] [patch] clean up to ehci-omap (Was: Re: [patch] omap: usb: ehci: fix use of hcd->regs)
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [patch] omap: usb: ehci: fix use of hcd->regs
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/10] Patches for fixing the lowmem module
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: HSMMC pending fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch] omap: usb: ehci: fix use of hcd->regs
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] MUSB: Set INDEX register to 0 before accessing CONFIGDATA
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [patch 2.6.27-rc6-omap1] twl4030: improve rtc device setup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3 clock: remove extra init from csi2_96m_fck
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Fix build for beagleboard
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch] omap: usb: ehci: fix use of hcd->regs
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [PATCH] OMAP3 clock: remove extra init from csi2_96m_fck
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• Re: omapfb not working on beagleboard
  • From: "arun c" <arun.edarath@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP2: Fix definition of SGX clock register bits
  • From: Daniel Stone <daniel.stone@xxxxxxxxx>
• Re: [PREVIEW] New display subsystem for OMAP2/3
  • From: Daniel Stone <daniel.stone@xxxxxxxxx>
• Re: [RFC] OMAP3: GPIO: Enable debounce clock only when debounce is enabled
  • From: Paul Walmsley <paul@xxxxxxxxxxx>
• RE: [PREVIEW] New display subsystem for OMAP2/3
  • From: "Shah, Hardik" <hardik.shah@xxxxxx>
• Re: [PATCH] Fix build for beagleboard
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [patch] omap: usb: ehci: fix use of hcd->regs
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH]Enable 4-bit in HSMMC1 and HSMMC2 platform data
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• Re: [patch] omap: usb: ehci: fix use of hcd->regs
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: omap-sdp3430_Rotation patch
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [patch] omap: usb: ehci: fix use of hcd->regs
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [patch] omap: usb: ehci: fix use of hcd->regs
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• omap-sdp3430_Mirroring patch
  • From: rajesh k <hirajeshk@xxxxxxxxx>
• omap-sdp3430_Rotation patch
  • From: rajesh k <hirajeshk@xxxxxxxxx>
• Re: [PATCH] Fix build for beagleboard
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• omapfb not working on beagleboard
  • From: "Felipe Contreras" <felipe.contreras@xxxxxxxxx>
• Re: [RFC] OMAP3: GPIO: Enable debounce clock only when debounce is enabled
  • From: Daniel Stone <daniel.stone@xxxxxxxxx>
• [RFC] OMAP3: GPIO: Enable debounce clock only when debounce is enabled
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH] Fix build for beagleboard
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH] *** SUBJECT HERE ***
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: [PATCH] Fix build for beagleboard
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH] OMAPFB: fix printing of reserved memory
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• RE: [PATCH 1/4] PM: Dynamic GPIO clock handling
  • From: <Tero.Kristo@xxxxxxxxx>
• [PATCH] PM debug support for 34xx
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 2/3] Added sleep support to UART
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 1/3] PM: Dynamic GPIO clock handling
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• PM34xx: Sleep support patches
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• Re: [PATCH]Enable 4-bit in HSMMC1 and HSMMC2 platform data
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 04/12] I2C re-init for every cmd
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• RE: [PATCH 0/29] PM: proposed branch for PM collaboration
  • From: "Rajendra Nayak" <rnayak@xxxxxx>
• RE: [PATCH 15/15] OMAP3 camera driver: OMAP34XXCAM: Add Sensors Support.
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH] ARM: OMAP: Clean-up MMC device init (Was: [PATCH]Enable 4-bit in HSMMC1 and HSMMC2 platform data)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3][OMAP 3/4]table end for wcd command definitions
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH]Enable 4-bit in HSMMC1 and HSMMC2 platform data
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: [PATCH]Enable 4-bit in HSMMC1 and HSMMC2 platform data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 2/3][OMAP 3/4]table end for wcd command definitions
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: [RFC] Patch for proper Cortex-A8 cache configuration output
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch 2.6.27-rc6-omap1] mach-omap2: fix more arch_initcall() breakage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Fix build for beagleboard
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH]Enable 4-bit in HSMMC1 and HSMMC2 platform data
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/29] PM: proposed branch for PM collaboration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH]Enable 4-bit in HSMMC1 and HSMMC2 platform data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/10] Patches for fixing the lowmem module
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 00/10] Patches for fixing the lowmem module
  • From: Viktor Rosendahl <Viktor.Rosendahl@xxxxxxxxx>
• Re: [PATCH 00/10] Patches for fixing the lowmem module
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 10/10] lowmem: Remove the possibility to stack the module
  • From: Viktor Rosendahl <viktor.rosendahl@xxxxxxxxx>
• [PATCH 06/10] lowmem: update memory management functions for the new kernel
  • From: Viktor Rosendahl <viktor.rosendahl@xxxxxxxxx>
• [PATCH 09/10] lowmem: Fix split of ptrace
  • From: Viktor Rosendahl <viktor.rosendahl@xxxxxxxxx>
• [PATCH 08/10] lowmem: add compatibility code
  • From: Viktor Rosendahl <viktor.rosendahl@xxxxxxxxx>
• [PATCH 01/10] Security: Kernel OOM-killer and allocation denial use different rules
  • From: Viktor Rosendahl <viktor.rosendahl@xxxxxxxxx>
• [PATCH 00/10] Patches for fixing the lowmem module
  • From: Viktor Rosendahl <viktor.rosendahl@xxxxxxxxx>
• [PATCH 05/10] lowmem: sysfs has changed
  • From: Viktor Rosendahl <viktor.rosendahl@xxxxxxxxx>
• [PATCH 07/10] lowmem: Security modules can no longer be removed.
  • From: Viktor Rosendahl <viktor.rosendahl@xxxxxxxxx>
• [PATCH 04/10] lowmem: remove an unecessary local variable
  • From: Viktor Rosendahl <viktor.rosendahl@xxxxxxxxx>
• [PATCH 03/10] lowmem: get rid of the percentages
  • From: Viktor Rosendahl <viktor.rosendahl@xxxxxxxxx>
• [PATCH 02/10] lowmem: remove unecessary usage of proc_dointvec_minmax()
  • From: Viktor Rosendahl <viktor.rosendahl@xxxxxxxxx>
• Re: [PATCH 04/12] I2C re-init for every cmd
  • From: "chandra shekhar" <x0044955@xxxxxx>
• [PREVIEW] New display subsystem for OMAP2/3
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH 15/29] OMAP3: PM: Move serial console check from omap3_can_sleep to idle loop
  • From: Daniel Stone <daniel.stone@xxxxxxxxx>
• Setup of tools / include path ?
  • From: Arno Steffen <arno.steffen@xxxxxx>
• Re: [PATCH 28/29] PM FIX: convert TI io_p2v() usage to OMAP2_IO_ADDRESS()
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 19/29] OMAP3: Do not set mpu, core, neon states if cpuidle is used
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 01/29] PM: Dynamic GPIO clock handling
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 05/29] Basic cpuidle driver
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 29/29] PM: serial: ensure padconf wake-enable bits are set for UARTs
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 21/29] OMAP3: PM: Remove unneeded code from suspend
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 26/29] OMAP: Sysfs interface for enabling voltage off in idle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 28/29] PM FIX: convert TI io_p2v() usage to OMAP2_IO_ADDRESS()
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 23/29] OMAP3: PM: Add new Kconfig option to enable/disable off mode
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 20/29] OMAP3: PM: Fixed header paths in include statements
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 24/29] OMAP3SDP: Add new config for off mode testing
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 16/29] OMAP3: PM: Remove static keyword from _omap_sram_idle declaration
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 11/29] serial context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 22/29] DMA context save / restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 14/29] CORE context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 15/29] OMAP3: PM: Move serial console check from omap3_can_sleep to idle loop
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 27/29] OMAP3: OFF command integration
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 12/29] gpio context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 18/29] OMAP3: PM: Do not build pm_idle loop if cpuidle is used
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 25/29] OMAP3: Remove CONFIG_OMAP_SYSOFFMODE flag
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 06/29] per/neon and core handling in idle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 09/29] mpu off state enabled
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 17/29] OMAP3: PM: Remove unneeded code from traditional pm_idle loop
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 13/29] i2c context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 10/29] gpmc context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 07/29] menuconfig updates for cpuidle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 02/29] Added sleep support to UART
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 08/29] scratchpad contents
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 03/29] PM debug support for 34xx
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 04/29] Sysfs interface for controlling suspend states + set_pwrdm_state fix
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/29] PM: proposed branch for PM collaboration
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH] Fix for twl4030-power.c build failure for beagleboard
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH] Fix build for beagleboard
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: [PATCH]Enable 4-bit in HSMMC1 and HSMMC2 platform data
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH]Enable 4-bit in HSMMC1 and HSMMC2 platform data
  • From: Jarkko Lavinen <jarkko.lavinen@xxxxxxxxx>
• Re: [PATCH 04/12] I2C re-init for every cmd
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• Re: [PATCH 04/12] I2C re-init for every cmd
  • From: "shekhar, chandra" <x0044955@xxxxxx>
• RE: Remaining kautobuild errors with mainline
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: omapzoom tree broken?
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [RESENDING][PATCH 1/2]OMAP3 NAND: Add NAND support on OMAP3430
  • From: "vimal singh" <vimalsingh@xxxxxx>
• Re: [PATCH 04/12] I2C re-init for every cmd
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• [patch 2.6.27-rc6-omap1] twl4030: improve rtc device setup
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [RESENDING][PATCH 1/2]OMAP3 NAND: Add NAND support on OMAP3430
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH]Enable 4-bit in HSMMC1 and HSMMC2 platform data
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH] Fixed CPU type check for OMAP3
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: [PATCH] Load triton2 scripts.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [RESENDING][PATCH 1/2]OMAP3 NAND: Add NAND support on OMAP3430
  • From: "Singh, Vimal" <vimalsingh@xxxxxx>
• Re: [PATCH]Enable 4-bit in HSMMC1 and HSMMC2 platform data
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [RFC] Patch for proper Cortex-A8 cache configuration output
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] Load triton2 scripts.
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MUSB: fix memory corruption when using more than max endpoints
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 07/12] System Control Module context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: testers wanted: isp1301_omap conversion to new-style i2c driver
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• RE: [PATCH 07/12] System Control Module context save/restore
  • From: "Rajendra Nayak" <rnayak@xxxxxx>
• Re: [RESENDING][PATCH 1/2]OMAP3 NAND: Add NAND support on OMAP3430
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.27-rc6-omap1] mach-omap2: fix more arch_initcall() breakage
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [RESENDING][PATCH 1/2]OMAP3 NAND: Add NAND support on OMAP3430
  • From: "vimal singh" <vimalsingh@xxxxxx>
• Re: [PATCH 07/12] System Control Module context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 07/12] System Control Module context save/restore
  • From: "Rajendra Nayak" <rnayak@xxxxxx>
• Re: HSMMC pending fixes
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• Re: [BRIDGE] Rebase and sync with omapzoom bridge patch update
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH][OMAP 3/4+] BRIDGE: Module ISR removed
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH] MUSB: Set INDEX register to 0 before accessing CONFIGDATA
  • From: "Bryan Wu" <cooloney@xxxxxxxxxx>
• Re: Bug in twl4030backupbatt_voltage()
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• Re: [PATCH 2/3][OMAP 3/4]table end for wcd command definitions
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH] Load triton2 scripts.
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• [PATCH][OMAP 3/4+] BRIDGE: Module ISR removed
  • From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
• Re: [PATCH] Fixed CPU type check for OMAP3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Patch for Touch Screen noise on OMAP3EVM.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Patch for Touch Screen noise on OMAP3EVM.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 15/15] OMAP3 camera driver: OMAP34XXCAM: Add Sensors Support.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 14/15] OMAP3 camera driver: OMAP34XXCAM: Camera Base Address.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP2: Fix definition of SGX clock register bits
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESENDING][PATCH 1/2]OMAP3 NAND: Add NAND support on OMAP3430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Load triton2 scripts.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: HSMMC pending fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH]Add 3430 SDP board level support for HSMMC2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH]Enable 4-bit in HSMMC1 and HSMMC2 platform data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] MUSB: fix memory corruption when using more than max endpoints
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch 2.6.27-rc3-omap1] tweak musb_hdrc SOC init code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3 clock: remove extra init from csi2_96m_fck
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Fix occasional i2c driver hang
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omap24xx is broken in current head
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC] Patch for proper Cortex-A8 cache configuration output
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: testers wanted: isp1301_omap conversion to new-style i2c driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3][OMAP 3/4]table end for wcd command definitions
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: omapzoom tree broken?
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] MUSB: Set INDEX register to 0 before accessing CONFIGDATA
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] ARM:OMAP3: Smartreflex disable/enable fix
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omapfb: remove wrong scale call for gfx_plane
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Fix omapfb's problem on OMAP3430sdp
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] This patch fixes the typo which breaks the build on OMAP1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3 clock: camera module has no target IDLEST bit
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 11/12] OMAP3 clock: remove duplicate call to omap2_init_clk_clkdm()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 10/12] OMAP2 clockdomain: add virt_opp_clkdm
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 12/12] OMAP2/3 clock: warn if clock is missing clockdomain
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 07/12] OMAP3 PRCM: add DPLL1-5 powerdomains, clockdomains
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 08/12] OMAP3 clock: mark DPLL clocks with their DPLLx clockdomains
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 09/12] OMAP2/3 clock: note clockdomains for remaining clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 04/12] OMAP2/3 clock: convert wkup_clkdm CM clocks to cm_clkdm
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 06/12] OMAP2/3 clockdomain: remove wkup_clkdm
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 05/12] OMAP2/3 clock: mark the rest of the CM clocks as belonging to cm_clkdm
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 03/12] OMAP2/3 clock: annotate PRM clocks that are missing clockdomains
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 02/12] OMAP2/3 clock: convert wkup_clkdm PRM clocks to prm_clkdm
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 01/12] OMAP2/3 clockdomains: add CM and PRM clkdms
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 00/12] Update OMAP2/3 powerdomains, clockdomains
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/3][OMAP 3/4]table end for wcd command definitions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 10/12] Adds support for CPUIdle safe state
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Bug in twl4030backupbatt_voltage()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 09/12] CORE OFF support in omap_sram_idle
  • From: Paul Walmsley <paul@xxxxxxxxxxx>
• Re: [PATCH 06/12] Interrupt Controller context save/restore
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 05/12] PRCM context save/restore
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 07/12] System Control Module context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: 3430: can't find mmc debounce clock
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH - Omapzoom] [NAND] Add prefetch and DMA support
  • From: "Singh, Vimal" <vimalsingh@xxxxxx>
• Re: Bug in twl4030backupbatt_voltage()
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• RE: 3430: can't find mmc debounce clock
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [BRIDGE] Rebase and sync with omapzoom bridge patch update
  • From: "Felipe Contreras" <felipe.contreras@xxxxxxxxx>
• Re: 3430: can't find mmc debounce clock
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [BRIDGE] Rebase and sync with omapzoom bridge patch update
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 1/2] McBSP DMA support for 34xx
  • From: "shekhar, chandra" <x0044955@xxxxxx>
• Re: [PATCH] MUSB: fix memory corruption when using more than max endpoints
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH] MUSB: fix memory corruption when using more than max endpoints
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Access to GPIO pins or timer
  • From: star@xxxxxx
• Re: [PATCH 1/2] McBSP DMA support for 34xx
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• RE: [Resend][PATCH - Omapzoom][NAND] Add prefetch and DMA support
  • From: "Singh, Vimal" <vimalsingh@xxxxxx>
• Re: [PATCH] MUSB: fix memory corruption when using more than max endpoints
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 1/2] McBSP DMA support for 34xx
  • From: "shekhar, chandra" <x0044955@xxxxxx>
• Re: Bug in twl4030backupbatt_voltage()
  • From: Adrian Hunter <ext-adrian.hunter@xxxxxxxxx>
• Re: [PATCH] This patch fixes the typo which breaks the build on OMAP1
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• [PATCH] MUSB: fix memory corruption when using more than max endpoints
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3][OMAP 3/4]table end for wcd command definitions
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [BRIDGE] Rebase and sync with omapzoom bridge patch update
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: cpu_is_omap15xx() doesn't get set for OMAP310
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: Working with Linux-Omap GIT Tree
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: Working with Linux-Omap GIT Tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH resend v2] TWL4030-RTC: Fix the broken functionality
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omapzoom tree broken?
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Working with Linux-Omap GIT Tree
  • From: "Ashwin Bihari" <abihari@xxxxxxxxx>
• Re: omapzoom tree broken?
  • From: "Ashwin Bihari" <abihari@xxxxxxxxx>
• Re: [PATCH resend v2] TWL4030-RTC: Fix the broken functionality
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: Error compiling for OMAP 5912
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Error compiling for OMAP 5912
  • From: Ramón Finger Lilienthal <ramon@xxxxxxxxxxxxxxxx>
• omapzoom tree broken?
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH resend v2] TWL4030-RTC: Fix the broken functionality
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] rtc-twl4030: Fix periodic interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch 2.6.27-rc5-omap1] rtc-twl4030 cleanup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Bug in twl4030backupbatt_voltage()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] OMAP3 clock: remove extra init from csi2_96m_fck
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/2] McBSP DMA support for 34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Changes which shouldn't be in OMAP tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Remaining kautobuild errors with mainline
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 32/33] add omap 1-wire interface driver
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• Re: [PATCH 01/12] GPMC context save/restore
  • From: Paul Walmsley <paul@xxxxxxxxxxx>
• Re: [PATCH] omapfb: setting GOLCD bit for shadow registers to make effect
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PATCH] omapfb: setting GOLCD bit for shadow registers to make effect
  • From: Daniel Stone <daniel.stone@xxxxxxxxx>
• Re: Remaining kautobuild errors with mainline
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH - Omapzoom][ONENAND] Add synchronous burst support
  • From: Adrian Hunter <ext-adrian.hunter@xxxxxxxxx>
• [PATCH 10/12] OMAP2 clockdomain: add virt_opp_clkdm
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 12/12] OMAP2/3 clock: warn if clock is missing clockdomain
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 11/12] OMAP3 clock: remove duplicate call to omap2_init_clk_clkdm()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 06/12] OMAP2/3 clockdomain: remove wkup_clkdm
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 09/12] OMAP2/3 clock: note clockdomains for remaining clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 07/12] OMAP3 PRCM: add DPLL1-5 powerdomains, clockdomains
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 08/12] OMAP3 clock: mark DPLL clocks with their DPLLx clockdomains
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 05/12] OMAP2/3 clock: mark the rest of the CM clocks as belonging to cm_clkdm
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 04/12] OMAP2/3 clock: convert wkup_clkdm CM clocks to cm_clkdm
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 03/12] OMAP2/3 clock: annotate PRM clocks that are missing clockdomains
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 02/12] OMAP2/3 clock: convert wkup_clkdm PRM clocks to prm_clkdm
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 01/12] OMAP2/3 clockdomains: add CM and PRM clkdms
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 00/12] Update OMAP2/3 powerdomains, clockdomains
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Changes which shouldn't be in OMAP tree
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Remaining kautobuild errors with mainline
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH] omapfb: remove wrong scale call for gfx_plane
  • From: "arun c" <arunedarath@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] This patch fixes the typo which breaks the build on OMAP1
  • From: "Arun KS" <arunks@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 09/12] CORE OFF support in omap_sram_idle
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• Re: HyperSPARC RT625 Cache Controler, Ross CY7C605 Cache Controler, Cache Aliases, and Linux MM Code
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] omapfb: setting GOLCD bit for shadow registers to make effect
  • From: "arun c" <arun.edarath@xxxxxxxxx>
• Re: [patch 2.6.27-rc3-omap1] omap2_nand updates
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [alsa-devel] [PATCH 3/5] ALSA: ASoC: Add support for TWL4030 audio codec (rev 3)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC 0/2 rev2] McBSP and ASoC OMAP update patches for 2430 and 34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH - Omapzoom] [NAND] Add prefetch and DMA support
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [Resend][PATCH - Omapzoom][NAND] Add prefetch and DMA support
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH - Omapzoom] [NAND] Add prefetch and DMA support
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [alsa-devel] [PATCH 3/5] ALSA: ASoC: Add support for TWL4030 audio codec (rev 4)
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: [PATCH 32/33] add omap 1-wire interface driver
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] omapfb: setting GOLCD bit for shadow registers to make effect
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PATCH]Add 3430 SDP board level support for HSMMC2
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [alsa-devel] [PATCH 3/5] ALSA: ASoC: Add support for TWL4030 audio codec (rev 3)
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: [Resend][PATCH - Omapzoom][NAND] Add prefetch and DMA support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH - Omapzoom][ONENAND] Add synchronous burst support
  • From: nskamat@xxxxxx
• Re: [PATCH 32/33] add omap 1-wire interface driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [Resend][PATCH - Omapzoom][NAND] Add prefetch and DMA support
  • From: nskamat@xxxxxx
• [PATCH - Omapzoom] [NAND] Add prefetch and DMA support
  • From: "Kamat, Nishant" <nskamat@xxxxxx>
• [PATCH] Fixed CPU type check for OMAP3
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• RE: [PATCH] Fixed CPU type check for OMAP3
  • From: <Tero.Kristo@xxxxxxxxx>
• [PATCH] Fixed CPU type check for OMAP3
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• RE: [PATCH 1/1] Use pmd_table() MACRO for unmap_area_sections()
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: powering up the mmc controller on 3430
  • From: "Budhee Jamaich" <budheej@xxxxxxxxx>
• 3430: can't find mmc debounce clock
  • From: "Budhee Jamaich" <budheej@xxxxxxxxx>
• Re: [PATCH] OMAP2EVM: Fix for omapfb irq error messages
  • From: "arun c" <arunedarath@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 32/33] add omap 1-wire interface driver
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• Re: [PATCH 1/4] ARM: OMAP: IOMMU driver: Core part
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 03/06] scratchpad populate
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• Re: [PATCH 1/4] ARM: OMAP: IOMMU driver: Core part
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [RFC rev2] ARM: OMAP: Add support for OMAP2430 in McBSP
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• [RFC 0/2 rev2] McBSP and ASoC OMAP update patches for 2430 and 34xx
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• [RFC rev2] ASoC: OMAP: Add support for OMAP2430 and OMAP34xx in McBSP DAI driver
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: [alsa-devel] [PATCH 3/5] ALSA: ASoC: Add support for TWL4030 audio codec (rev 3)
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• [PATCH] omapfb: setting GOLCD bit for shadow registers to make effect
  • From: "arun c" <arunedarath@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] Use pmd_table() MACRO for unmap_area_sections()
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 4/4] Sysfs interface for controlling suspend states + set_pwrdm_state fix
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• [PATCH] Patch for Touch Screen noise on OMAP3EVM.
  • From: "A NAVEEN" <anaveen@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: OMAP: IOMMU driver: VMA management
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH 4/4] ARM: OMAP: Introduce MMU class
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH 2/4] ARM: OMAP: IOMMU driver: VMA management
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH 2/4] ARM: OMAP: IOMMU driver: VMA management
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH 3/4] ARM: OMAP: IOMMU driver: OMAP2 specific
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [RFC] ARM: OMAP: peripheral device common IOMMU driver
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH 1/4] ARM: OMAP: IOMMU driver: Core part
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH] Patch for Touch Screen noise on OMAP3EVM.
  • From: anaveen@xxxxxxxxxxxxxxxxxxxx
• [PATCH] MUSB: Support for high bandwidth isochronous transfer
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH] MUSB: Fix for isochronous IN transfer
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• RE: [PATCH] BRIDGE OMAP PM Bug softlockup fix
  • From: "Ramesh Gupta Guntha" <x0023949@xxxxxx>
• Re: [PATCH 1/1] Use pmd_table() MACRO for unmap_area_sections()
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Fix omapfb's problem on OMAP3430sdp
  • From: "stanley.miao" <stanley.miao@xxxxxxxxxxxxx>
• Re: [PATCH] MUSB: Set INDEX register to 0 before accessing CONFIGDATA
  • From: "Bryan Wu" <cooloney@xxxxxxxxxx>
• [PATCH] ARM: OMAP3: Fix omapfb's problem on OMAP3430sdp
  • From: "stanley.miao" <stanley.miao@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Fix omapfb's problem on OMAP3430sdp
  • From: "stanley.miao" <stanley.miao@xxxxxxxxxxxxx>
• RE: [PATCH 1/1] Use pmd_table() MACRO for unmap_area_sections()
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• RE: powering up the mmc controller on 3430
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: Enabling MUSB support
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 1/1] Use pmd_table() MACRO for unmap_area_sections()
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• powering up the mmc controller on 3430
  • From: "Budhee Jamaich" <budheej@xxxxxxxxx>
• Re: [PATCH 12/33] Add tsc2005 touchscreen driver
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: musb broken, was [RFC 0/2] McBSP and ASoC OMAP update patches for 2430 and 34xx
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: musb broken, was [RFC 0/2] McBSP and ASoC OMAP update patches for 2430 and 34xx
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: musb broken, was [RFC 0/2] McBSP and ASoC OMAP update patches for 2430 and 34xx
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: musb broken, was [RFC 0/2] McBSP and ASoC OMAP update patches for 2430 and 34xx
  • From: Måns Rullgård <mans@xxxxxxxxx>
• [PATCH 5/5] ARM: OMAP2: defconfig for the Gumstix Overo board (rev 3)
  • From: sakoman@xxxxxxxxx
• [PATCH 3/5] ALSA: ASoC: Add support for TWL4030 audio codec (rev 3)
  • From: sakoman@xxxxxxxxx
• [PATCH 1/5] ARM: OMAP2: Add support for the Gumstix Overo board (rev 3)
  • From: sakoman@xxxxxxxxx
• [PATCH 4/5] ALSA: ASoC: Add support for Gumstix Overo (rev 3)
  • From: sakoman@xxxxxxxxx
• [PATCH 2/5] ARM: OMAP2: Add video driver the Gumstix Overo board (rev 3)
  • From: sakoman@xxxxxxxxx
• [PATCH 0/5] ARM: OMAP2: Add support for GUmstix Overo (rev 3)
  • From: sakoman@xxxxxxxxx
• Re: musb broken, was [RFC 0/2] McBSP and ASoC OMAP update patches for 2430 and 34xx
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] MUSB: Set INDEX register to 0 before accessing CONFIGDATA
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: musb broken, was [RFC 0/2] McBSP and ASoC OMAP update patches for 2430 and 34xx
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• [PATCH] OMAP2EVM: Fix for omapfb irq error messages
  • From: "arun c" <arunedarath@xxxxxxxxxxxxxxxxxxxx>
• PATCH [2/2][OMAP 3/4+] BRIDGE OMAP CSL wrappers removed
  • From: "Ramirez Luna, Omar" <x00omar@xxxxxx>
• [PATCH 1/2][OMAP 3/4+] BRIDGE OMAP deleted unused dbl files
  • From: "Ramirez Luna, Omar" <x00omar@xxxxxx>
• [RESEND][PATCH 2/2] CLK: Use virtual clock register for mcbsp
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [RESEND][PATCH 1/2] CLK: Introduce virtual clock registration
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>