The DPLL's rate changes when it enters or leaves bypass, so the DPLL's rate and the rates of all dependent clocks need to be recalculated when this happens. Also, fix test for bypass to test against the appropriate bypass clock, rather than the parent clock (which is not the bypass clock for DPLL1 and DPLL2). Signed-off-by: Paul Walmsley <paul@xxxxxxxxx> --- arch/arm/mach-omap2/clock34xx.c | 17 +++++++++++++++-- 1 files changed, 15 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 520fc35..13baf2f 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -180,7 +180,7 @@ static int _omap3_noncore_dpll_lock(struct clk *clk) } /* - * omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness + * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness * @clk: pointer to a DPLL struct clk * * Instructs a non-CORE DPLL to enter low-power bypass mode. In @@ -270,15 +270,26 @@ static int _omap3_noncore_dpll_stop(struct clk *clk) static int omap3_noncore_dpll_enable(struct clk *clk) { int r; + long rate; + struct dpll_data *dd; if (clk == &dpll3_ck) return -EINVAL; - if (clk->parent->rate == omap2_get_dpll_rate(clk)) + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + rate = omap2_get_dpll_rate(clk); + + if (dd->bypass_clk->rate == rate) r = _omap3_noncore_dpll_bypass(clk); else r = _omap3_noncore_dpll_lock(clk); + if (!r) + clk->rate = rate; + return r; } @@ -399,6 +410,8 @@ static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) pr_debug("clock: %s: set rate: entering bypass.\n", clk->name); ret = _omap3_noncore_dpll_bypass(clk); + if (!ret) + clk->rate = rate; } else { -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html