Re: OMAP support in mainline?

Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx> · Thu, 18 Sep 2008 13:16:55 +0200

Op 18 sep 2008, om 11:55 heeft Felipe Balbi het volgende geschreven:

On Wed, Sep 17, 2008 at 03:23:49PM +0200, ext Koen Kooi wrote:

Op 17 sep 2008, om 14:24 heeft Steve Sakoman het volgende geschreven:

On Wed, Sep 17, 2008 at 12:16 AM, Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx 
>
wrote:

And they aren't working too well with current l-o git either with  
MUSB
being
broken. There's a patch to fix client mode, but host mode still  
isn't
working.

Host mode musb is working just fine on Overo with the "set
transceiver" patch.  Not sure why you are having trouble with Beagle
(and can't check since I don't have my Beagle board with me at the
moment)

I should clarify: OTG mode with a host cable doesn't work in .27rc,  
it does
work in 2.6.26. I haven't tried specifying pure hostmode, only OTG.
I would try it on the evm as well, but that is having serious irq  
issues
with .27rc, pressing a key on the keypad triggers an irq overrun,  
ethernet
gives an oops on boot when trying to register and irq etc,etc.  
2.6.27 is
looking really, really bad on omap3 at the moment.

Yeah, we lost some musb history when it went to mainline. I didn't  
test
this patch yet cuz I've been quite busy at work, but it should make
beagle work. Could you tell me if makes it work ?

diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 9d2dcb1..f7fe91e 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -215,12 +215,14 @@ void musb_platform_set_mode(struct musb *musb,  
u8 musb_mode)

int __init musb_platform_init(struct musb *musb)
{
+       struct otg_transceiver *xceiv = otg_get_transceiver();
       u32 l;

#if defined(CONFIG_ARCH_OMAP2430)
       omap_cfg_reg(AE5_2430_USB0HS_STP);
#endif

+       memcpy(musb->xceiv, xceiv, sizeof(*xceiv));
       musb_platform_resume(musb);

       l = omap_readl(OTG_SYSCONFIG);


That looks like http://gitweb.openembedded.net/?p=org.openembedded.dev.git;a=blob;f=packages/linux/linux-omap/musb-mru-otgfix.diff;h=767858b8b1580ed7cd67d8e7627301600dda111c;hb=d733dd05e030a67dfbf4540fa1a041adccbe4ffc 
 which doesn't work for me :(

And, no, I'm not going to try omapzoom stuff, I want it working on the  
canonical linux-omap kernel, not some corporate version with god knows  
how many hacks.

regards,

Koen




--
balbi


Attachment:
PGP.sig

Description: This is a digitally signed message part




