Linux for Texus Instruments OMAP Processors

• Thread Index

• Re: [PATCH 1/2] omap2+: add drm device
  • From: Rob Clark <rob.clark@xxxxxxxxxx>
• Re: [PATCH 1/2] omap2+: add drm device
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: OMAP3 L2/outer cache enabled in kernel (after being disabled by uBoot)?
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: OMAP3 L2/outer cache enabled in kernel (after being disabled by uBoot)?
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: OMAP3 L2/outer cache enabled in kernel (after being disabled by uBoot)?
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH V4 2/2] regulator: tps65217: Add tps65217 regulator driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] ARM: OMAP3: fix build on !CONFIG_IOMMU_API
  • From: Joerg Roedel <Joerg.Roedel@xxxxxxx>
• Re: OMAP3 L2/outer cache enabled in kernel (after being disabled by uBoot)?
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 5/5] OMAP : serial : Check for error in get_context_loss_count
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH 4/5] ARM : OMAP : serial : Make context_loss_cnt signed
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH 0/5] uart updates
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH 3/5] omap-serial: Fix the error handling in the omap_serial probe
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH 2/5] omap-serial: make serial_omap_restore_context depend on CONFIG_PM_RUNTIME
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH 1/5] omap-serial :Make the suspend/resume functions depend on CONFIG_PM_SLEEP.
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• Re: OMAP3 L2/outer cache enabled in kernel (after being disabled by uBoot)?
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• OMAP3 L2/outer cache enabled in kernel (after being disabled by uBoot)?
  • From: "Joe Woodward" <jw@xxxxxxxxxxxxxx>
• Re: [PATCH 5/6] OMAPDSS: DISPC: move fifo threhold calc to dispc.c
  • From: Archit <a0393947@xxxxxx>
• Re: [PATCH 5/6] OMAPDSS: DISPC: move fifo threhold calc to dispc.c
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: omap clocksource timer selection: dmtimer OR 32K-Sync timer
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH V4 2/2] regulator: tps65217: Add tps65217 regulator driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: Saravana Kannan <skannan@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: "Turquette, Mike" <mturquette@xxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: Saravana Kannan <skannan@xxxxxxxxxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: NeilBrown <neilb@xxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: NeilBrown <neilb@xxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/2] omap2+: add drm device
  • From: Rob Clark <rob.clark@xxxxxxxxxx>
• Re: [RFC PATCH v2 6/8] media: v4l2: introduce two IOCTLs for object detection
  • From: Sylwester Nawrocki <snjw23@xxxxxxxxx>
• Re: [PATCH 1/2] omap2+: add drm device
  • From: Rob Clark <rob.clark@xxxxxxxxxx>
• Re: [PATCH 1/2] omap2+: add drm device
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 2/2] drm/omap: platform data structs moved to plat-omap
  • From: Rob Clark <rob.clark@xxxxxxxxxx>
• [PATCH 1/2] omap2+: add drm device
  • From: Rob Clark <rob.clark@xxxxxxxxxx>
• Re: [PATCH] omap2+: add drm device
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH] omap2+: add drm device
  • From: Rob Clark <rob@xxxxxx>
• Re: [PATCH] omap2+: add drm device
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 5/6] OMAPDSS: DISPC: move fifo threhold calc to dispc.c
  • From: Archit <a0393947@xxxxxx>
• Re: [PATCH] omap2+: add drm device
  • From: Rob Clark <rob.clark@xxxxxxxxxx>
• Re: [PATCH] omap2+: add drm device
  • From: Rob Clark <rob@xxxxxx>
• Re: [PATCH] omap2+: add drm device
  • From: "Aguirre, Sergio" <saaguirre@xxxxxx>
• Re: [PATCH] omap2+: add drm device
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH] omap2+: add drm device
  • From: Rob Clark <rob@xxxxxx>
• [PATCH] omap2+: add drm device
  • From: Rob Clark <rob.clark@xxxxxxxxxx>
• Re: [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR
  • From: Aneesh V <aneesh@xxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] ARM: OMAP3: fix build on !CONFIG_IOMMU_API
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: omap4: Fix omap_barriers_init for generic ioremap changes
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: omap clocksource timer selection: dmtimer OR 32K-Sync timer
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: fix build on !CONFIG_IOMMU_API
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: fix build on !CONFIG_IOMMU_API
  • From: Joerg Roedel <Joerg.Roedel@xxxxxxx>
• Re: [PATCH] arm: omap4: Fix omap_barriers_init for generic ioremap changes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: support cpufreq on 3.0.10-rt27
  • From: Antonio Barbalace <antoniob@xxxxxx>
• Re: omap clocksource timer selection: dmtimer OR 32K-Sync timer
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] ARM: OMAP3: fix build on !CONFIG_IOMMU_API
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• RE: omap clocksource timer selection: dmtimer OR 32K-Sync timer
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: support cpufreq on 3.0.10-rt27
  • From: Antonio Barbalace <antoniob@xxxxxx>
• support cpufreq on 3.0.10-rt27
  • From: Antonio Barbalace <antoniob@xxxxxx>
• Re: omap clocksource timer selection: dmtimer OR 32K-Sync timer
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] arm: omap4: Fix omap_barriers_init for generic ioremap changes
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: omap clocksource timer selection: dmtimer OR 32K-Sync timer
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: omap clocksource timer selection: dmtimer OR 32K-Sync timer
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH v2 4/5] arm/dts: OMAP3: Add interrupt-controller bindings for INTC
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH] arm: omap4: Fix omap_barriers_init for generic ioremap changes
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: omap clocksource timer selection: dmtimer OR 32K-Sync timer
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• [GIT PULL] HSI framework
  • From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 4/5] arm/dts: OMAP3: Add interrupt-controller bindings for INTC
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: omap clocksource timer selection: dmtimer OR 32K-Sync timer
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH v2 4/5] arm/dts: OMAP3: Add interrupt-controller bindings for INTC
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• omap clocksource timer selection: dmtimer OR 32K-Sync timer
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• [PATCH 6/6] OMAPDSS: DISPC: Add naive threshold calc for fifomerge
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 5/6] OMAPDSS: DISPC: move fifo threhold calc to dispc.c
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 4/6] OMAPDSS: DISPC: print fifo threshold values in bytes
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 3/6] OMAPDSS: APPLY: add fifo-merge support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 2/6] OMAPDSS: APPLY: add fifo merge support funcs
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 1/6] OMAPDSS: FEAT: Add FIFO_MERGE feature
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 0/6] OMAPDSS: naive fifomerge support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: NeilBrown <neilb@xxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: fix build on !CONFIG_IOMMU_API
  • From: Joerg Roedel <Joerg.Roedel@xxxxxxx>
• Re: [PATCH v2 4/5] arm/dts: OMAP3: Add interrupt-controller bindings for INTC
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] arm: omap4: Fix omap_barriers_init for generic ioremap changes
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] ARM: OMAP3 PM:Save and restore EMU context across MPU OFF
  • From: Madhusudhan Gowda <madhusudhan.gowda@xxxxxxxxxxxxxx>
• [PATCH RFC/RFT 3/3] omap : hsmmc : remove pm_runtime_get_sync/put sync from suspend/resume
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH RFC/RFT 2/3] mmc: omap_hsmmc : Clean up the runtime suspend/resume
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH RFC/RFT 1/3] mmc: omap_hsmmc : Make the suspend/resume functions depend on CONFIG_PM_SLEEP
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH RFC/RFT] mmc : updates
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv9 1/2] OMAP : I2C : Remove reset at init
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv9 0/2] I2C driver updates
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH 2/2] I2C: OMAP: Recover from Bus Busy condition
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• RE: [PATCH v2 4/5] arm/dts: OMAP3: Add interrupt-controller bindings for INTC
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: AM35xx
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH] usb: musb: drop superfluous pm_runtime calls around musb_shutdown
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 0/4] OMAPDSS/ASoC: Repair broken HDMI audio in K3.2-rcX
  • From: Ricardo Neri <ricardo.neri@xxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: Saravana Kannan <skannan@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: Saravana Kannan <skannan@xxxxxxxxxxxxxx>
• Re: [PATCHv8 4/5] OMAP: I2C: Remove the reset in the init path
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Kevin Hilman <khilman@xxxxxx>
• AM35xx
  • From: Cliff Brake <cliff.brake@xxxxxxxxx>
• Re: [PATCH] arm: omap4: Fix omap_barriers_init for generic ioremap changes
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] arm: omap4: Fix omap_barriers_init for generic ioremap changes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: omap4: Fix omap_barriers_init for generic ioremap changes
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH] arm: omap4: Fix omap_barriers_init for generic ioremap changes
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] arm: omap4: Fix omap_barriers_init for generic ioremap changes
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH] arm: omap4: Fix omap_barriers_init for generic ioremap changes
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] arm: omap4: Fix omap_barriers_init for generic ioremap changes
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] arm: omap4: Fix omap_barriers_init for generic ioremap changes
  • From: Nicolas Pitre <nico@xxxxxxxxxxx>
• Re: [PATCH] arm: omap4: Fix omap_barriers_init for generic ioremap changes
  • From: Nicolas Pitre <nico@xxxxxxxxxxx>
• Re: [PATCH] arm: omap4: Fix omap_barriers_init for generic ioremap changes
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [GIT PULL] adding rpmsg and remoteproc to 3.3
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH] arm: omap4: Fix omap_barriers_init for generic ioremap changes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] omap3: add definition for CONTROL_CAMERA_PHY_CTRL
  • From: "Aguirre, Sergio" <saaguirre@xxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: linux-next problems
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: linux-next problems
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] usb: musb: drop superfluous pm_runtime calls around musb_shutdown
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: linux-next problems
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH] usb: musb: drop superfluous pm_runtime calls around musb_shutdown
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH] usb: musb: drop superfluous pm_runtime calls around musb_shutdown
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v2] usb: musb: fix pm_runtime mismatch
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• linux-next problems
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH RFC] OMAP: I2C: Fix the mismatch of pm_runtime enable and disable
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: fix MMC2 loopback clock handling
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP: fix MMC2 loopback clock handling
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCHv8 4/5] OMAP: I2C: Remove the reset in the init path
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH RFC 2/2] OMAP : serial : Check for error in get_context_loss_count
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH RFC 1/2] ARM : OMAP : serial : Make context_loss_cnt signed
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH] usb: musb: fix shutdown while usb gadget is in use
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• [PATCH] usb: musb: drop superfluous pm_runtime calls around musb_shutdown
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: fix build on !CONFIG_IOMMU_API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: musb: fix pm_runtime mismatch
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [RFC/PATCH 00/26] PM: Create the AVS class of drivers
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 25/26] OMAP: PM: convert the SmartReflex code into the AVS driver framework
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 25/26] OMAP: PM: convert the SmartReflex code into the AVS driver framework
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 15/15] arch/arm/mach-omap2/smartreflex.c: add missing iounmap
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH RFC] omap-serial: Fix the error handling in the omap_serial probe
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH V2] OMAP3: hwmod_data: register dss hwmods after dss_core
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH RFC] omap-serial: make serial_omap_restore_context depend on CONFIG_PM_RUNTIME
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH RFC] I2C : OMAP : make omap_i2c_unidle/idle functions depend on CONFIG_PM_RUNTIME
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCH v2] I2C: OMAP: Recover from Bus Busy condition
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• RE: [RFC/PATCH 8/7] ARM: OMAP: AM35xx: convert 3517 detection/flags to AM35xx
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH v2] I2C: OMAP: Recover from Bus Busy condition
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCH 0/4] OMAPDSS/ASoC: Repair broken HDMI audio in K3.2-rcX
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 00/26] PM: Create the AVS class of drivers
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 25/26] OMAP: PM: convert the SmartReflex code into the AVS driver framework
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 25/26] OMAP: PM: convert the SmartReflex code into the AVS driver framework
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/1] omap3: add definition for CONTROL_CAMERA_PHY_CTRL
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] omap3: add definition for CONTROL_CAMERA_PHY_CTRL
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH v2] I2C: OMAP: Recover from Bus Busy condition
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH RFC] I2C : OMAP : make omap_i2c_unidle/idle functions depend on CONFIG_PM_RUNTIME
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V2 1/2] mcx: very basic support for HTKW mcx board
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH V2] OMAP3: hwmod_data: register dss hwmods after dss_core
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH 2/2] mt_ventoux: support for TeeJet Mt.Ventoux board
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: don't init PM on AM35{05,17}
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• [PATCH v2] I2C: OMAP: Recover from Bus Busy condition
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH v2] I2C: OMAP: Recover from Bus Busy condition
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Archit <a0393947@xxxxxx>
• RE: [RFC/PATCH 8/7] ARM: OMAP: AM35xx: convert 3517 detection/flags to AM35xx
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH-V2 0/2] arm:omap:am33xx: Add voltage and power domain data
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH-V2 1/2] arm:omap:am33xx: Add voltage domain data
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH-V2 1/3] arm:omap:omap4: Remove hardcoded reg-offs for PWRSTCTRL & PWRSTST
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH-V2 3/3] arm:omap:omap4: Hook-up am33xx support to existing prm code
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: "Joe Woodward" <jw@xxxxxxxxxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Archit <a0393947@xxxxxx>
• Re: [PATCHv8 4/5] OMAP: I2C: Remove the reset in the init path
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: "Joe Woodward" <jw@xxxxxxxxxxxxxx>
• Re: [PATCHv8 4/5] OMAP: I2C: Remove the reset in the init path
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH RFC] OMAP: I2C: Fix the mismatch of pm_runtime enable and disable
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCHv8 4/5] OMAP: I2C: Remove the reset in the init path
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Archit <a0393947@xxxxxx>
• [PATCH RFC] OMAP : watchdog : Fix the mismatch of pm_runtime enable and disable
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• Re: [PATCH 1/1] omap3: add definition for CONTROL_CAMERA_PHY_CTRL
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH RFC] OMAP: I2C: Fix the mismatch of pm_runtime enable and disable
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCHv8 4/5] OMAP: I2C: Remove the reset in the init path
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [BUG] perf_event: no PMU interrupt on OMAP4 with 3.2.0 (Pandaboard)
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCHv12 0/9] OMAP3+: PRCM chain handler
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] ARM: OMAP3: fix build on !CONFIG_IOMMU_API
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCHv8 4/5] OMAP: I2C: Remove the reset in the init path
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH RFC] OMAP: I2C: Fix the mismatch of pm_runtime enable and disable
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH V4 1/2] MFD: TPS65217: Add new mfd device for TPS65217
  • From: AnilKumar Ch <anilkumar@xxxxxx>
• [PATCH V4 2/2] regulator: tps65217: Add tps65217 regulator driver
  • From: AnilKumar Ch <anilkumar@xxxxxx>
• [PATCH V4 0/2] Add TI TPS65217 PMIC driver support
  • From: AnilKumar Ch <anilkumar@xxxxxx>
• [PATCH RFC] I2C : OMAP : make omap_i2c_unidle/idle functions depend on CONFIG_PM_RUNTIME
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• RE: [PATCH V3 2/2] regulator: tps65217: Add tps65217 regulator driver
  • From: "AnilKumar, Chimata" <anilkumar@xxxxxx>
• RE: [PATCH] MAINTAINERS: List i2c-omap and i2c-davinci drivers
  • From: "Nori, Sekhar" <nsekhar@xxxxxx>
• Re: [PATCHv8 4/5] OMAP: I2C: Remove the reset in the init path
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• [PATCH RFC] omap-serial: make serial_omap_restore_context depend on CONFIG_PM_RUNTIME
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH RFC] omap-serial :Make the suspend/resume functions depend on CONFIG_PM_SLEEP.
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• Re: [PATCH 0/4] OMAPDSS/ASoC: Repair broken HDMI audio in K3.2-rcX
  • From: Ricardo Neri <ricardo.neri@xxxxxx>
• Re: [PATCH-V2 0/2] arm:omap:am33xx: Add voltage and power domain data
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv8 4/5] twl4030: add support for external voltage get/set
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH-V2 1/2] arm:omap:am33xx: Add voltage domain data
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH-V2 1/3] arm:omap:omap4: Remove hardcoded reg-offs for PWRSTCTRL & PWRSTST
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH-V2 3/3] arm:omap:omap4: Hook-up am33xx support to existing prm code
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHV2 REPOST 6/7] ARM: OMAP3 PM: Remove IO Daisychain control from cpuidle
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHV2 REPOST 5/7] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHV2 REPOST 5/7] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHV2 REPOST 5/7] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHV2 REPOST 4/7] ARM: OMAP3 PM: Enable IO Wake up
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHV2 REPOST 3/7] ARM: OMAP4 PM: Add IO Daisychain support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHV2 REPOST 2/7] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHV2 REPOST 0/7] ARM: OMAP3PLUS PM: Add IO DaisyChain support via hwmod mux
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2] irqdomain: Initialize number of IRQs for simple domains
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCHv8 4/5] OMAP: I2C: Remove the reset in the init path
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv8 4/5] twl4030: add support for external voltage get/set
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv12 0/9] OMAP3+: PRCM chain handler
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH] MAINTAINERS: List i2c-omap and i2c-davinci drivers
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• RE: [PATCHv12 0/9] OMAP3+: PRCM chain handler
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• Re: [PATCH v2] irqdomain: Initialize number of IRQs for simple domains
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 09/10] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: "Joe Woodward" <jw@xxxxxxxxxxxxxx>
• Re: [PATCHv8 4/5] twl4030: add support for external voltage get/set
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v2 3/3] OMAPDSS: HDMI: HPD support added to HDMI driver
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCH v2 1/3] OMAPDSS: HDMI: HPD support in boardfile
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 1/3] OMAPDSS: HDMI: HPD support in boardfile
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] OMAP: I2C: add devexit to the remove code
  • From: "Datta, Shubhrajyoti" <shubhrajyoti@xxxxxx>
• Re: [PATCHv8 4/5] OMAP: I2C: Remove the reset in the init path
  • From: "Datta, Shubhrajyoti" <shubhrajyoti@xxxxxx>
• Re: [PATCHv8 4/5] twl4030: add support for external voltage get/set
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv12 0/9] OMAP3+: PRCM chain handler
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv8 4/5] twl4030: add support for external voltage get/set
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v9 REPOST 00/25] gpio/omap: driver cleanup and fixes
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: oprofile and ARM A9 hardware counter
  • From: stephane eranian <eranian@xxxxxxxxxxxxxx>
• Re: [PATCH RFCv2] MFD: OMAP: USB: Make the runtime functions depend on CONFIG_PM_RUNTIME
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: oprofile and ARM A9 hardware counter
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH v2 09/10] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM
  • From: Tabi Timur-B04825 <B04825@xxxxxxxxxxxxx>
• Re: [PATCH] omap: add rcu_locking to omap2_set_init_voltage.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] omap: add rcu_locking to omap2_set_init_voltage.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC/PATCH 8/7] ARM: OMAP: AM35xx: convert 3517 detection/flags to AM35xx
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: USB Host port inoperative after kexec on Beagleboard
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: USB Host port inoperative after kexec on Beagleboard
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: oprofile and ARM A9 hardware counter
  • From: Will Deacon <will.deacon@xxxxxxx>
• USB Host port inoperative after kexec on Beagleboard
  • From: Peter Chubb <peter.chubb@xxxxxxxxxxxx>
• Re: DSS2/PM on 3.2 broken?
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Bad page state in tidspbridge driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: Bad page state in tidspbridge driver
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• [GIT PULL] ARM: OMAP3+: Add DT support for i2c, twl6030 and EVM
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [GIT PULL] ARM: OMAP2+: Interrupt controllers adaptation to DT
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• DSS2/PM on 3.2 broken?
  • From: "Joe Woodward" <jw@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] arm/dts: OMAP4: Update DTS file with new GIC bindings
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: RX51 modem support
  • From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
• Re: [PATCH v2 4/4] ASoC: OMAP: ams-delta: drop .set_bias_level callback
  • From: Liam Girdwood <lrg@xxxxxx>
• [PATCH RFCv2] MFD: OMAP: USB: Make the runtime functions depend on CONFIG_PM_RUNTIME
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• Re: [PATCH RFC] MFD: OMAP: USB: Make the runtime functions depend on CONFIG_PM_RUNTIME
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: [PATCH v2 2/5] ARM: OMAP2/3: intc: Add irqdomain support
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] irqdomain: Initialize number of IRQs for simple domains
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 1/2] MFD: TPS65217: Add new mfd device for TPS65217
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 2/2] regulator: tps65217: Add tps65217 regulator driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] OMAPDSS: HDMI: Sysfs support to configure quantization range
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v4 0/4] OMAPDSS: HDMI: Improve the timings logic in HDMI
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] ARM: omap: add rcu_locking to omap2_set_init_voltage.
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR
  • From: Olof Johansson <olof@xxxxxxxxx>
• RE: [PATCHv12 0/9] OMAP3+: PRCM chain handler
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• Re: [GIT PULL] OMAP DSS for v3.3
  • From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
• [PATCH] omap: add rcu_locking to omap2_set_init_voltage.
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH v4 03/12] mfd: twl-core: Add initial DT support for twl4030/twl6030
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Bad page state in tidspbridge driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR
  • From: Aneesh V <aneesh@xxxxxx>
• Re: [PATCH 1/1] omap3: add definition for CONTROL_CAMERA_PHY_CTRL
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• [PATCH-V2 1/3] arm:omap:omap4: Remove hardcoded reg-offs for PWRSTCTRL & PWRSTST
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH-V2 3/3] arm:omap:omap4: Hook-up am33xx support to existing prm code
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH-V2 0/3] arm:omap:omap4:Remove hardcoded reg-offs for PWRSTCTRL & PWRSTST
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH-V2 2/3] arm:omap:omap4: Maintain virtual addr in in _prm_bases table
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• RE: [RFC PATCH] arm:omap:omap4: Remove hardcoded reg-offs for PWRSTCTRL & PWRSTST
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH 0/7] ARM: OMAP: remove IP checks from SoC family detection
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [RFC/PATCH 8/7] ARM: OMAP: AM35xx: convert 3517 detection/flags to AM35xx
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH v4 1/4] OMAP3: hwmod data: add mmu data for iva and isp
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] arm/dts: OMAP4: Update DTS file with new GIC bindings
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH v2 5/5] ARM: OMAP2+: board-generic: Use of_irq_init API
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 4/5] arm/dts: OMAP3: Add interrupt-controller bindings for INTC
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 3/5] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 2/5] ARM: OMAP2/3: intc: Add irqdomain support
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 1/5] arm/dts: OMAP4: Update DTS file with new GIC bindings
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [RFC PATCH] arm:omap:omap4: Remove hardcoded reg-offs for PWRSTCTRL & PWRSTST
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] omap: add rcu_locking to omap2_set_init_voltage.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 0/5] ARM: OMAP2+: Interrupt controllers adaptation to DT
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH 0/7] ARM: OMAP: remove IP checks from SoC family detection
  • From: Kevin Hilman <khilman@xxxxxx>
• [RFC/PATCH 8/7] ARM: OMAP: AM35xx: convert 3517 detection/flags to AM35xx
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] irqdomain: Initialize number of IRQs for simple domains
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v2 0/5] ARM: OMAP2+: Interrupt controllers adaptation to DT
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [GIT PULL] I2C: OMAP: misc. updates for v3.3
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] OMAP: I2C: add devexit to the remove code
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• [BUG] perf_event: no PMU interrupt on OMAP4 with 3.2.0 (Pandaboard)
  • From: Stephane Eranian <eranian@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] OMAPDSS: HDMI: Sysfs support to configure quantization
  • From: "K, Mythri P" <mythripk@xxxxxx>
• [PATCH v2 3/3] OMAPDSS: HDMI: HPD support added to HDMI driver
  • From: <mythripk@xxxxxx>
• [PATCH v2 1/3] OMAPDSS: HDMI: HPD support in boardfile
  • From: <mythripk@xxxxxx>
• [PATCH 0/3] OMAPDSS: HDMI: HDMI Hot-plug detect support.
  • From: <mythripk@xxxxxx>
• [PATCH v2 2/3] OMAPDSS: HDMI: Handle HPD event in ip
  • From: <mythripk@xxxxxx>
• [PATCH v3 2/3] OMAPDSS: HDMI: Add quantization range support in IP lib
  • From: <mythripk@xxxxxx>
• [PATCH v3 3/3] OMAPDSS: HDMI: Sysfs support to configure quantization range
  • From: <mythripk@xxxxxx>
• [PATCH v3 1/3] OMAPDSS: HDMI: Move Avi-infoframe struct to hdmi_ip_data
  • From: <mythripk@xxxxxx>
• [PATCH v4 2/4] OMAPDSS: HDMI: update static timing table
  • From: <mythripk@xxxxxx>
• [PATCH v4 4/4] OMAPDSS: HDMI: remove duplicate code and mode parameter
  • From: <mythripk@xxxxxx>
• [PATCH v4 3/4] OMAPDSS: HDMI: change the timing match logic
  • From: <mythripk@xxxxxx>
• [PATCH v4 0/4] OMAPDSS: HDMI: Improve the timings logic in HDMI
  • From: <mythripk@xxxxxx>
• [PATCH v4 1/4] OMAPDSS: HDMI: remove duplicate video interface code
  • From: <mythripk@xxxxxx>
• RE: [RFC/PATCH 3/7] ARM: OMAP3: clock data: treat all AM35x devices the same
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [RFC/PATCH 3/7] ARM: OMAP3: clock data: treat all AM35x devices the same
  • From: Kevin Hilman <khilman@xxxxxx>
• [GIT PULL] I2C: OMAP: misc. updates for v3.3
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC/PATCH 3/7] ARM: OMAP3: clock data: treat all AM35x devices the same
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP/I2C - Fix timeout problem during suspend.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v4 2/6] Documentation: common clk API
  • From: "Turquette, Mike" <mturquette@xxxxxx>
• Re: [PATCH v4 1/4] OMAP3: hwmod data: add mmu data for iva and isp
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH-V1] arm/dts: Add support for TI OMAP3 EVM board
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v4 2/6] Documentation: common clk API
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
• Re: [PATCH 1/7] amp/remoteproc: add framework for controlling remote processors
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH-V1] arm/dts: Add support for TI OMAP3 EVM board
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: [PATCH-V1] arm/dts: Add support for TI OMAP3 EVM board
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH 0/7] ARM: OMAP: remove IP checks from SoC family detection
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [RFC/PATCH 7/7] ARM: OMAP: remove unused cpu_is_omap3530()
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [RFC/PATCH 3/7] ARM: OMAP3: clock data: treat all AM35x devices the same
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [RFC/PATCH 4/7] ARM: OMAP: AM35x: remove redunant cpu_is checks for AM3505
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [RFC/PATCH 5/7] ARM: OMAP: clock: remove unused CK_3505 flag
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH v2 03/10] mfd: twl-core: Add initial DT support for twl4030/twl6030
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [RFC/PATCH 3/7] ARM: OMAP3: clock data: treat all AM35x devices the same
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [GIT PULL] OMAP DSS for v3.3
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/2] mt_ventoux: very basic support for TeeJet Mt.Ventoux board
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH] video/omap2. dispc_mgr_enable needs runtime PM
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] video/omap2. dispc_mgr_enable needs runtime PM
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH v2 2/3] OMAPDSS: HDMI: Add quantization range support in IP lib
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 3/4] OMAPDSS: HDMI: change the timing match logic
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 3/3] OMAPDSS: HDMI: Sysfs support to configure quantization
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] OMAP/I2C - Fix timeout problem during suspend.
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: "Turquette, Mike" <mturquette@xxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH] AM35xx: disable checking for reserved feature bits
  • From: Kevin Hilman <khilman@xxxxxx>
• [RFC/PATCH 2/7] ARM: OMAP3: clock data: replace 3503/3517 flag with AM35x flag for UART4
  • From: Kevin Hilman <khilman@xxxxxx>
• [RFC/PATCH 6/7] ARM: OMAP: remove unused cpu_is_omap3505()
  • From: Kevin Hilman <khilman@xxxxxx>
• [RFC/PATCH 7/7] ARM: OMAP: remove unused cpu_is_omap3530()
  • From: Kevin Hilman <khilman@xxxxxx>
• [RFC/PATCH 5/7] ARM: OMAP: clock: remove unused CK_3505 flag
  • From: Kevin Hilman <khilman@xxxxxx>
• [RFC/PATCH 4/7] ARM: OMAP: AM35x: remove redunant cpu_is checks for AM3505
  • From: Kevin Hilman <khilman@xxxxxx>
• [RFC/PATCH 3/7] ARM: OMAP3: clock data: treat all AM35x devices the same
  • From: Kevin Hilman <khilman@xxxxxx>
• [RFC/PATCH 1/7] ARM: OMAP: remove unused cpu_is macros that depend on specific IP checks
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 0/7] ARM: OMAP: remove IP checks from SoC family detection
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: "Turquette, Mike" <mturquette@xxxxxx>
• How do I get slimbus hwmod information?
  • From: Marc Butler <marc@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP/I2C - Fix timeout problem during suspend.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 2/3] arm/dts: OMAP: Remove bootargs node from board files
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 1/2] mt_ventoux: very basic support for TeeJet Mt.Ventoux board
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 08/10] arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 07/10] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 03/10] mfd: twl-core: Add initial DT support for twl4030/twl6030
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 09/10] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 05/10] arm/dts: OMAP4: Add i2c controller nodes
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 04/10] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 01/10] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 06/10] arm/dts: OMAP3: Add i2c controller nodes
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 10/10] ARM: OMAP2+: board-generic: Remove i2c static init
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 0/3] coupled cpuidle state support
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH] ARM: OMAP2+ i2c NACK without STP
  • From: Mark Olleson <mark.olleson@xxxxxxxxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH 3/3] of/irq: Add interrupts-names property to name an irq resource
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [linux-pm] [PATCH 1/3] cpuidle: refactor out cpuidle_enter_state
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 1/3 REPOST] OMAPDSS: HDMI: Move Avi infoframe structure to
  • From: "K, Mythri P" <mythripk@xxxxxx>
• [PATCH v2 1/3] OMAPDSS: HDMI: Move Avi-infoframe struct to hdmi_ip_data
  • From: <mythripk@xxxxxx>
• [PATCH v2 3/3] OMAPDSS: HDMI: Sysfs support to configure quantization
  • From: <mythripk@xxxxxx>
• [PATCH v2 2/3] OMAPDSS: HDMI: Add quantization range support in IP lib
  • From: <mythripk@xxxxxx>
• [PATCH v3 4/4] OMAPDSS: HDMI: remove duplicate code and mode parameter
  • From: <mythripk@xxxxxx>
• [PATCH v3 3/4] OMAPDSS: HDMI: change the timing match logic
  • From: <mythripk@xxxxxx>
• [PATCH v3 2/4] OMAPDSS: HDMI: update static timing table
  • From: <mythripk@xxxxxx>
• [PATCH v3 1/4] OMAPDSS: HDMI: remove duplicate video interface code
  • From: <mythripk@xxxxxx>
• [PATCH v3 0/4] OMAPDSS: HDMI: Improve the timings logic in HDMI
  • From: <mythripk@xxxxxx>
• [PATCH V3 2/2] regulator: tps65217: Add tps65217 regulator driver
  • From: AnilKumar Ch <anilkumar@xxxxxx>
• [PATCH V3 1/2] MFD: TPS65217: Add new mfd device for TPS65217
  • From: AnilKumar Ch <anilkumar@xxxxxx>
• [PATCH V3 0/2] Add TI TPS65217 PMIC driver support
  • From: AnilKumar Ch <anilkumar@xxxxxx>
• Re: [RFC PATCH v2 7/8] media: video: introduce object detection driver module
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH] video/omap2. dispc_mgr_enable needs runtime PM
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/3] of/base: Take NULL string into account for property with multiple strings
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 1/7] amp/remoteproc: add framework for controlling remote processors
  • From: Mark Grosen <mgrosen@xxxxxx>
• Re: [PATCH 3/3] of/irq: Add interrupts-names property to name an irq resource
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 1/7] amp/remoteproc: add framework for controlling remote processors
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 2/7] amp/remoteproc: add debugfs entries
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 0/3] coupled cpuidle state support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH RFC] MFD: OMAP: USB: Make the runtime functions depend on CONFIG_PM_RUNTIME
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] ARM: OMAP2+ i2c NACK without STP
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] omap: use usleep_range() instead of mdelay()/udelay()
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP3: don't init PM on AM35{05,17}
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 0/4] OMAPDSS/ASoC: Repair broken HDMI audio in K3.2-rcX
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] of/base: Take NULL string into account for property with multiple strings
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v8 19/20] OMAP2+: UART: Do not gate uart clocks if used for debug_prints
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH v4 03/12] mfd: twl-core: Add initial DT support for twl4030/twl6030
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: [PATCH v8 19/20] OMAP2+: UART: Do not gate uart clocks if used for debug_prints
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• Re: [PATCH v3] OMAP: DSS2: Support for UMSH-8173MD TFT panel
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH v8 19/20] OMAP2+: UART: Do not gate uart clocks if used for debug_prints
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• RE: [PATCH v8 19/20] OMAP2+: UART: Do not gate uart clocks if used for debug_prints
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• Re: [PATCH 1/3 REPOST] OMAPDSS: HDMI: Move Avi infoframe structure to
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 3/4] OMAPDSS: HDMI: change the timing match logic
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 2/2] mt_ventoux: support for TeeJet Mt.Ventoux board
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH v4 0/2] OMAPDSS: HDMI: Boardfile cleanup
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] OMAPDSS: add OrtusTech COM43H4M10XTC display support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3] OMAP: DSS2: Support for UMSH-8173MD TFT panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH RFC] MFD: OMAP: USB: Make the runtime functions depend on CONFIG_PM_RUNTIME
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• RE: [PATCH V2 2/2] TPS65217: Add tps65217 regulator driver
  • From: "AnilKumar, Chimata" <anilkumar@xxxxxx>
• Re: [PATCH 0/4] OMAPDSS/ASoC: Repair broken HDMI audio in K3.2-rcX
  • From: Ricardo Neri <ricardo.neri@xxxxxx>
• Re: [PATCH 5/5] bq27x00 - don't report power-supply change so often.
  • From: NeilBrown <neilb@xxxxxxx>
• Re: It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [PATCH] omap_hsmmc - use threaded irq handler for card-detect.
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH V2 2/2] TPS65217: Add tps65217 regulator driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V2 2/2] TPS65217: Add tps65217 regulator driver
  • From: AnilKumar Ch <anilkumar@xxxxxx>
• [PATCH V2 1/2] MFD: TPS65217: Add new mfd device for TPS65217
  • From: AnilKumar Ch <anilkumar@xxxxxx>
• [PATCH V2 0/2] Add TI TPS65217 PMIC driver support
  • From: AnilKumar Ch <anilkumar@xxxxxx>
• Re: [PATCH v2 4/4] ASoC: OMAP: ams-delta: drop .set_bias_level callback
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] ASoC: cx20442: add bias control over a platform provided regulator
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] MFD: TPS65217: Add new mfd device for TPS65217
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 19/20] OMAP2+: UART: Do not gate uart clocks if used for debug_prints
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• RE: [PATCH 1/2] MFD: TPS65217: Add new mfd device for TPS65217
  • From: "AnilKumar, Chimata" <anilkumar@xxxxxx>
• RE: [PATCH v8 19/20] OMAP2+: UART: Do not gate uart clocks if used for debug_prints
  • From: "Bedia, Vaibhav" <vaibhav.bedia@xxxxxx>
• Re: [PATCH v4 03/12] mfd: twl-core: Add initial DT support for twl4030/twl6030
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• [PATCH 3/3 REPOST] OMAPDSS: HDMI: Add sysfs support to configure
  • From: <mythripk@xxxxxx>
• [PATCH 2/3 REPOST] OMAPDSS: HDMI: Add support to configure quantization
  • From: <mythripk@xxxxxx>
• [PATCH 1/3 REPOST] OMAPDSS: HDMI: Move Avi infoframe structure to
  • From: <mythripk@xxxxxx>
• [PATCH 1/3 REPOST] OMAPDSS: HDMI: Move Avi infoframe structure to
  • From: <mythripk@xxxxxx>
• [PATCH v2 2/4] OMAPDSS: HDMI: update static timing table
  • From: <mythripk@xxxxxx>
• [PATCH v2 3/4] OMAPDSS: HDMI: change the timing match logic
  • From: <mythripk@xxxxxx>
• [PATCH v2 4/4] OMAPDSS: HDMI: remove duplicate code and mode parameter
  • From: <mythripk@xxxxxx>
• [PATCH v2 1/4] OMAPDSS: HDMI: remove duplicate video interface code
  • From: <mythripk@xxxxxx>
• [PATCH 0/4] OMAPDSS: HDMI: Improve the timings logic in HDMI
  • From: <mythripk@xxxxxx>
• [PATCH v4 2/2] OMAPDSS: HDMI: Disable DDC internal pull up
  • From: <mythripk@xxxxxx>
• [PATCH v4 1/2] OMAPDSS: HDMI: Move duplicate code from boardfile
  • From: <mythripk@xxxxxx>
• [PATCH v4 0/2] OMAPDSS: HDMI: Boardfile cleanup
  • From: <mythripk@xxxxxx>
• RX51 modem support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 5/5] bq27x00 - don't report power-supply change so often.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [alsa-devel] It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [alsa-devel] It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [alsa-devel] It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: [alsa-devel] It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: [PATCH 5/5] bq27x00 - don't report power-supply change so often.
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [alsa-devel] It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2] OMAP3: hwmod_data: register dss hwmods after dss_core
  • From: Archit Taneja <a0393947@xxxxxx>
• [BUG] SIOCSIFFLAGS returns -EIO on SMSC LAN911x
  • From: Javier Martinez Canillas <martinez.javier@xxxxxxxxx>
• Re: [PATCH] omap_hsmmc - use threaded irq handler for card-detect.
  • From: Kishore Kadiyala <kishorek.kadiyala@xxxxxxxxx>
• [PATCH v2 3/4] ARM: OMAP1: ams-delta: update the modem to use regulator API
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v2 1/4] ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v2 2/4] ASoC: cx20442: add bias control over a platform provided regulator
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v2 4/4] ASoC: OMAP: ams-delta: drop .set_bias_level callback
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v2 0/4] Amstrad Delta: access MODEM_RESET GPIO pin over a regulator
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 4/5] omap_hdq: handle case where isr sees a 0 status byte.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 5/5] bq27x00 - don't report power-supply change so often.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 3/5] omap_hdq: use wait_event_timeout to wait for read to complete.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 2/5] omap_hdq: Fix some error/debug handling.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 1/5] Fix w1_bq27000
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH 0/5] Improvements to bq27000 management on OMAP
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH] OMAP/I2C - Fix timeout problem during suspend.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH] video/omap2. dispc_mgr_enable needs runtime PM
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH] omap2430 musb: Make musb_otg_notification non-blocking
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH] omap_hsmmc - use threaded irq handler for card-detect.
  • From: NeilBrown <neilb@xxxxxxx>
• [PATCH] omap: add rcu_locking to omap2_set_init_voltage.
  • From: NeilBrown <neilb@xxxxxxx>
• Re: It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 0/4] OMAPDSS/ASoC: Repair broken HDMI audio in K3.2-rcX
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 7/8] media: video: introduce object detection driver module
  • From: Sylwester Nawrocki <snjw23@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: hsmmc: add max_freq field
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH 0/4] OMAPDSS/ASoC: Repair broken HDMI audio in K3.2-rcX
  • From: "K, Mythri P" <mythripk@xxxxxx>
• Re: Problem booting Overo Tide at 720MHz
  • From: Andre Puschmann <andre.puschmann@xxxxxxxxxxxxx>
• Re: Problem booting Overo Tide at 720MHz
  • From: Andre Puschmann <andre.puschmann@xxxxxxxxxxxxx>
• Re: Problem booting Overo Tide at 720MHz
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: Problem booting Overo Tide at 720MHz
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Problem booting Overo Tide at 720MHz
  • From: Andre Puschmann <andre.puschmann@xxxxxxxxxxxxx>
• RE: [PATCH 2/2] TPS65217: Add tps65217 regulator driver
  • From: "AnilKumar, Chimata" <anilkumar@xxxxxx>
• [PATCH V2] OMAP3: hwmod_data: register dss hwmods after dss_core
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH 2/2] TPS65217: Add tps65217 regulator driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 2/2] TPS65217: Add tps65217 regulator driver
  • From: "AnilKumar, Chimata" <anilkumar@xxxxxx>
• RE: [PATCH] lis3lv02d: Add STMicroelectronics lis33ldlh digital
  • From: "AnilKumar, Chimata" <anilkumar@xxxxxx>
• RE: [PATCH 1/2] MFD: TPS65217: Add new mfd device for TPS65217
  • From: "AnilKumar, Chimata" <anilkumar@xxxxxx>
• [PATCH V2] mt_ventoux: support for TeeJet Mt.Ventoux board
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH 2/2] mt_ventoux: support for TeeJet Mt.Ventoux board
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [GIT PULL] omap ehci related changes for v3.3 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL] omap hwmod changes for v3.3 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] mmc: omap: remove clock rate hard coding
  • From: Chris Ball <cjb@xxxxxxxxxx>
• Re: [alsa-devel] [PATCH 2/4] ASoC: cx20442: add bias control over a platform provided regulator
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v9 REPOST 24/25] gpio/omap: restore OE only after setting the output level
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 16/25] gpio/omap: use pm-runtime framework
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 00/25] gpio/omap: driver cleanup and fixes
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 02/25] gpio/omap: use flag to identify wakeup domain
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 07/25] gpio/omap: further cleanup using wkup_en register
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 19/25] gpio/omap: fix debounce clock handling
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 14/25] gpio/omap: remove bank->method & METHOD_* macros
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 04/25] gpio/omap: handle save/restore context in GPIO driver
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 10/25] gpio/omap: cleanup set_gpio_triggering function
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 22/25] gpio/omap: save and restore debounce registers
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 08/25] gpio/omap: use level/edge detect reg offsets
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 05/25] gpio/omap: make non-wakeup GPIO part of pdata
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 18/25] gpio/omap: cleanup prepare_for_idle and resume_after_idle
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 06/25] gpio/omap: avoid cpu checks during module ena/disable
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 03/25] gpio/omap: make gpio_context part of gpio_bank structure
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 17/25] gpio/omap: optimize suspend and resume functions
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 01/25] gpio/omap: remove dependency on gpio_bank_count
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 11/25] gpio/omap: cleanup omap_gpio_mod_init function
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 23/25] gpio/omap: enable irq at the end of all configuration in restore
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 20/25] gpio/omap: fix incorrect access of debounce module
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 21/25] gpio/omap: remove omap_gpio_save_context overhead
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 15/25] gpio/omap: fix bankwidth for OMAP7xx MPUIO
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 13/25] gpio/omap: remove unnecessary bit-masking for read access
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 25/25] gpio/omap: handle set_dataout reg capable IP on restore
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 09/25] gpio/omap: remove hardcoded offsets in context save/restore
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 REPOST 12/25] gpio/omap: use pinctrl offset instead of macro
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• Re: [PATCH] ARM: OMAP2+ i2c NACK without STP
  • From: "T Krishnamoorthy, Balaji" <balajitk@xxxxxx>
• Re: [alsa-devel] [PATCH 2/4] ASoC: cx20442: add bias control over a platform provided regulator
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [RFC PATCH 29/29] OMAPDSS: FEATURES: Allow WB panels to attach to managers
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 28/29] OMAPDSS: MANAGER: Add writeback as a sysfs attribute
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 27/29] OMAPDSS: MANAGER: Split manager_display_store into smaller functions
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 26/29] OMAPDSS: DISPLAY: Add a manager apply to sysfs store attributes for writeback
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 25/29] OMAPDSS: Writeback: Add sysfs attributes to writeback panel
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 24/29] OMAPDSS: Writeback: Use panel driver ops to configure mirroring rotation and buffer size
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 23/29] OMAPDSS: Writeback: Configure writeback specific parameters
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 22/29] OMAPDSS: DISPC: Setup writeback go, enable and channel_in functions
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 21/29] OMAPDSS: DISPC: Configure overlay-like parameters in dispc_wb_setup
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 20/29] OMAPDSS: Writeback: Add writeback capabilities
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 19/29] OMAPDSS: DISPC: Don't set chroma resampling bit for writeback
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 18/29] OMAPDSS: DISPC: Make chroma_upscale an argument to dispc_plane_setup
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 17/29] OMAPDSS: DISPC: Make dispc_ovl_setup call dispc_plane_setup
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 16/29] OMAPDSS: OVERLAY: Add position and replication as overlay caps
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 15/29] OMAPDSS: DISPC: Pass overlay caps as a parameter to DISPC overlay related functions
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 14/29] OMAPDSS: DISPC: Allow both upscaling and downscaling of chroma
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 13/29] OMAPDSS: APPLY: Configure writeback FIFOs
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 12/29] OMAPDSS: Writeback: Add check for color_mode in dss_wb_simple_check()
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 11/29] OMAPDSS: DISPC: Add writeback as a new plane
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 10/29] OMAPDSS: APPLY: Calculate channel_in for writeback
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 09/29] OMAPDSS: APPLY: Allow manager set/unset_device ops to set/unset writeback
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 08/29] OMAPDSS: APPLY: Modify manager unset device op
  • From: Archit Taneja <archit@xxxxxx>