Re: [PATCH 5/5] bq27x00 - don't report power-supply change so often.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



CCing Lars who added this. I vaguely recall something about generating
events to make some battery monitors update but I forget the details
now, maybe it was about something else. Also CCing Anton (the
maintainer).

On Fri, Dec 30, 2011 at 2:58 AM, NeilBrown <neilb@xxxxxxx> wrote:
> A power_supply_changed should only be reported on significant changes
> such as transition between charging and not.  Incremental changes
> such as charge increasing should not be reported - that can easily
> be polled for.
>
> Signed-off-by: NeilBrown <neilb@xxxxxxx>
> ---
>
>  drivers/power/bq27x00_battery.c |   15 ++++++++++++---
>  1 files changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
> index bb16f5b..7993a17 100644
> --- a/drivers/power/bq27x00_battery.c
> +++ b/drivers/power/bq27x00_battery.c
> @@ -57,11 +57,15 @@
>  #define BQ27000_FLAG_CHGS              BIT(7)
>  #define BQ27000_FLAG_FC                        BIT(5)
>
> +#define BQ27000_FLAGS_IMPORTANT                (BQ27000_FLAG_FC|BQ27000_FLAG_CHGS|BIT(31))
> +
>  #define BQ27500_REG_SOC                        0x2C
>  #define BQ27500_REG_DCAP               0x3C /* Design capacity */
>  #define BQ27500_FLAG_DSC               BIT(0)
>  #define BQ27500_FLAG_FC                        BIT(9)
>
> +#define BQ27500_FLAGS_IMPORTANT                (BQ27500_FLAG_FC|BQ27500_FLAG_DSC|BIT(31))
> +
>  #define BQ27000_RS                     20 /* Resistor sense */
>
>  struct bq27x00_device_info;
> @@ -259,6 +263,7 @@ static void bq27x00_update(struct bq27x00_device_info *di)
>  {
>        struct bq27x00_reg_cache cache = {0, };
>        bool is_bq27500 = di->chip == BQ27500;
> +       int flags_changed;
>
>        cache.flags = bq27x00_read(di, BQ27x00_REG_FLAGS, is_bq27500);
>        if (cache.flags >= 0) {
> @@ -280,10 +285,14 @@ static void bq27x00_update(struct bq27x00_device_info *di)
>
>        /* Ignore current_now which is a snapshot of the current battery state
>         * and is likely to be different even between two consecutive reads */
> -       if (memcmp(&di->cache, &cache, sizeof(cache) - sizeof(int)) != 0) {
> -               di->cache = cache;
> +       flags_changed = di->cache.flags ^ cache.flags;
> +       di->cache = cache;
> +       if (is_bq27500)
> +               flags_changed &= BQ27500_FLAGS_IMPORTANT;
> +       else
> +               flags_changed &= BQ27000_FLAGS_IMPORTANT;
> +       if (flags_changed)
>                power_supply_changed(&di->bat);
> -       }
>
>        di->last_update = jiffies;
>  }
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


-- 
Gražvydas
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux