A power_supply_changed should only be reported on significant changes such as transition between charging and not. Incremental changes such as charge increasing should not be reported - that can easily be polled for. Signed-off-by: NeilBrown <neilb@xxxxxxx> --- drivers/power/bq27x00_battery.c | 15 ++++++++++++--- 1 files changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c index bb16f5b..7993a17 100644 --- a/drivers/power/bq27x00_battery.c +++ b/drivers/power/bq27x00_battery.c @@ -57,11 +57,15 @@ #define BQ27000_FLAG_CHGS BIT(7) #define BQ27000_FLAG_FC BIT(5) +#define BQ27000_FLAGS_IMPORTANT (BQ27000_FLAG_FC|BQ27000_FLAG_CHGS|BIT(31)) + #define BQ27500_REG_SOC 0x2C #define BQ27500_REG_DCAP 0x3C /* Design capacity */ #define BQ27500_FLAG_DSC BIT(0) #define BQ27500_FLAG_FC BIT(9) +#define BQ27500_FLAGS_IMPORTANT (BQ27500_FLAG_FC|BQ27500_FLAG_DSC|BIT(31)) + #define BQ27000_RS 20 /* Resistor sense */ struct bq27x00_device_info; @@ -259,6 +263,7 @@ static void bq27x00_update(struct bq27x00_device_info *di) { struct bq27x00_reg_cache cache = {0, }; bool is_bq27500 = di->chip == BQ27500; + int flags_changed; cache.flags = bq27x00_read(di, BQ27x00_REG_FLAGS, is_bq27500); if (cache.flags >= 0) { @@ -280,10 +285,14 @@ static void bq27x00_update(struct bq27x00_device_info *di) /* Ignore current_now which is a snapshot of the current battery state * and is likely to be different even between two consecutive reads */ - if (memcmp(&di->cache, &cache, sizeof(cache) - sizeof(int)) != 0) { - di->cache = cache; + flags_changed = di->cache.flags ^ cache.flags; + di->cache = cache; + if (is_bq27500) + flags_changed &= BQ27500_FLAGS_IMPORTANT; + else + flags_changed &= BQ27000_FLAGS_IMPORTANT; + if (flags_changed) power_supply_changed(&di->bat); - } di->last_update = jiffies; } -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html