Hi Rob/Grant,
Gentle ping on that series too. This should the last one:-)
Thanks,
Benoit
On 12/23/2011 10:46 AM, Cousson, Benoit wrote:
Hi Rob,
Are you OK with that update?
Thanks,
Benoit
On 12/20/2011 2:39 PM, Benoit Cousson wrote:
Hi Tony and Rob,
Here is the series to take advantage of the new DT interrupt init
mechanism.
Thanks to Marc's CONFIG_MULTI_IRQ_HANDLER series, OMAP4 just has to
use the
default GIC binding and does not need some OMAP specific hacks anymore.
OMAP2 and 3 are using a simple interrupt controller that can thus expose
a simpler binding.
This update, compared to v1 [1], is introducing the IRQ domain for the
OMAP2&3 INTC by default for both DT and none-DT build.
Please note that in the near future that code can even be simplier
with the
introduction of the domain support inside generic irq chip.
This series is based on lo/dt branch to get the needed cleanup and
fixes for
OMAP.
The series is available here for reference:
git://gitorious.org/omap-pm/linux.git for_3.3/2_dt_irq
Regards,
Benoit
[1] http://www.spinics.net/lists/linux-omap/msg61152.html
Benoit Cousson (5):
arm/dts: OMAP4: Update DTS file with new GIC bindings
ARM: OMAP2/3: intc: Add irqdomain support
ARM: OMAP2/3: intc: Add DT support for TI interrupt controller
arm/dts: OMAP3: Add interrupt-controller bindings for INTC
ARM: OMAP2+: board-generic: Use of_irq_init API
.../devicetree/bindings/arm/omap/intc.txt | 27 +++++++++++
arch/arm/boot/dts/omap3.dtsi | 6 ++-
arch/arm/boot/dts/omap4.dtsi | 3 +-
arch/arm/mach-omap2/board-generic.c | 30 +++++++------
arch/arm/mach-omap2/common.h | 10 ++++
arch/arm/mach-omap2/irq.c | 48 ++++++++++++++++++--
6 files changed, 103 insertions(+), 21 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/omap/intc.txt
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
