Hi Tony and Rob, Here is the series to take advantage of the new DT interrupt init mechanism. Thanks to Marc's CONFIG_MULTI_IRQ_HANDLER series, OMAP4 just has to use the default GIC binding and does not need some OMAP specific hacks anymore. OMAP2 and 3 are using a simple interrupt controller that can thus expose a simpler binding. This update, compared to v1 [1], is introducing the IRQ domain for the OMAP2&3 INTC by default for both DT and none-DT build. Please note that in the near future that code can even be simplier with the introduction of the domain support inside generic irq chip. This series is based on lo/dt branch to get the needed cleanup and fixes for OMAP. The series is available here for reference: git://gitorious.org/omap-pm/linux.git for_3.3/2_dt_irq Regards, Benoit [1] http://www.spinics.net/lists/linux-omap/msg61152.html Benoit Cousson (5): arm/dts: OMAP4: Update DTS file with new GIC bindings ARM: OMAP2/3: intc: Add irqdomain support ARM: OMAP2/3: intc: Add DT support for TI interrupt controller arm/dts: OMAP3: Add interrupt-controller bindings for INTC ARM: OMAP2+: board-generic: Use of_irq_init API .../devicetree/bindings/arm/omap/intc.txt | 27 +++++++++++ arch/arm/boot/dts/omap3.dtsi | 6 ++- arch/arm/boot/dts/omap4.dtsi | 3 +- arch/arm/mach-omap2/board-generic.c | 30 +++++++------ arch/arm/mach-omap2/common.h | 10 ++++ arch/arm/mach-omap2/irq.c | 48 ++++++++++++++++++-- 6 files changed, 103 insertions(+), 21 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/omap/intc.txt -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
