Linux for Texus Instruments OMAP Processors

• Thread Index

• [RFC PATCH 07/29] OMAPDSS: APPLY: Add extra_info for writeback
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 06/29] OMAPDSS: APPLY: Add writeback enable/disable functions
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 05/29] OMAPDSS: APPLY/Writeback: Apply writeback configurations
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 04/29] OMAPDSS: APPLY/Writeback: Add writeback_info
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 03/29] OMAPDSS: Writeback: Add writeback interface and panel driver
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 02/29] OMAPDSS: Add writeback to omap_dss_mgr_output
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 01/29] omapdss/omapfb/omap_vout: Introduce manager output struct
  • From: Archit Taneja <archit@xxxxxx>
• [RFC PATCH 00/29] OMAPDSS: Initial Writeback Capture mode support
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 2/2] mt_ventoux: support for TeeJet Mt.Ventoux board
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• [PATCH 2/2] mt_ventoux: support for TeeJet Mt.Ventoux board
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• [PATCH 0/2] Support for TeeJet Mt.Ventoux
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• [PATCH 1/2] mt_ventoux: very basic support for TeeJet Mt.Ventoux board
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• [PATCH] OMAPDSS: add OrtusTech COM43H4M10XTC display support
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH 4/4] ASoC: OMAP: ams-delta: drop .set_bias_level callback
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 4/4] ASoC: OMAP: ams-delta: drop .set_bias_level callback
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] ASoC: OMAP: ams-delta: drop .set_bias_level callback
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [alsa-devel] [PATCH 2/4] ASoC: cx20442: add bias control over a platform provided regulator
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 4/4] ASoC: OMAP: ams-delta: drop .set_bias_level callback
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] ASoC: cx20442: add bias control over a platform provided regulator
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 04/10] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030
  • From: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
• Re: [PATCH v4 1/4] OMAP3: hwmod data: add mmu data for iva and isp
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH-V2 2/2] arm:omap:am33xx: Add power domain data
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH-V2 1/2] arm:omap:am33xx: Add voltage domain data
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH-V2 0/2] arm:omap:am33xx: Add voltage and power domain data
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• Re: [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• [PATCH 2/4] ASoC: cx20442: add bias control over a platform provided regulator
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 3/4] ARM: OMAP1: ams-delta: update the modem to use regulator API
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 4/4] ASoC: OMAP: ams-delta: drop .set_bias_level callback
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 1/4] ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 0/4] Amstrad Delta: access MODEM_RESET GPIO pin over a regulator
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 6/9] arch/arm/mach-omap2/devices.c: introduce missing kfree
  • From: Julia Lawall <julia@xxxxxxx>
• [PATCH 3/9] drivers/usb/dwc3/dwc3-pci.c: introduce missing kfree
  • From: Julia Lawall <julia@xxxxxxx>
• Re: [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH v4 1/4] OMAP3: hwmod data: add mmu data for iva and isp
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH] ARM: OMAP: hsmmc: add max_freq field
  • From: "T Krishnamoorthy, Balaji" <balajitk@xxxxxx>
• Re: Adding remoteproc/rpmsg to linux-next
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH] lis3lv02d: Add STMicroelectronics lis33ldlh digital
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] TPS65217: Add tps65217 regulator driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: problem with twl4030 GPIO irqs
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH 1/2] MFD: TPS65217: Add new mfd device for TPS65217
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/9] include: platform_data: Platform data header for OMAP4 ASoC audio
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] OMAP4: Fix CLKR/FSR mux for port with 6 pin mode
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: [PATCH v2 0/5] ARM: OMAP2+: Interrupt controllers adaptation to DT
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [QUESTION] How to set static/dynamic dependency between clock domains
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH v3 00/11] OMAP4: Add DT support for i2c and twl6030
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [QUESTION] How to set static/dynamic dependency between clock domains
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [QUESTION] How to set static/dynamic dependency between clock domains
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [QUESTION] How to set static/dynamic dependency between clock domains
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [QUESTION] How to set static/dynamic dependency between clock domains
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v3 8/9] OMAP4: omap4panda: Enable audio support
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH v3 2/9] OMAP4: 4430sdp: Register platform device for OMAP4 audio
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH v3] OMAP: DSS2: Support for UMSH-8173MD TFT panel
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: hsmmc: add max_freq field
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [linux-pm] [PATCH 0/3] coupled cpuidle state support
  • From: Colin Cross <ccross@xxxxxxxxxxx>
• Re: [PATCH 01/10] arm: omap4: fix kconfig warning
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/10] arm: omap4: fix kconfig warning
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v3 8/9] OMAP4: omap4panda: Enable audio support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: hsmmc: add max_freq field
  • From: Kishore Kadiyala <kishorek.kadiyala@xxxxxxxxx>
• Re: [PATCH v3 2/9] OMAP4: 4430sdp: Register platform device for OMAP4 audio
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v3 9/9] ASoC: Kconfig: OMAP4: Enable support for PandaBoards
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 8/9] OMAP4: omap4panda: Enable audio support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 7/9] ASoC: omap-abe-twl6040: Configure card according to platform data
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 6/9] ASoC: omap-abe-twl6040: DAI link selection based on platform data
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 5/9] ASoC: omap-abe-twl6040: Add complete DAPM routing
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 4/9] ASoC: twl6040: Convert MICBIAS to SUPPLY widget
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 3/9] ASoC: omap-abe-twl6040: Convert to platform deriver
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 2/9] OMAP4: 4430sdp: Register platform device for OMAP4 audio
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 1/9] include: platform_data: Platform data header for OMAP4 ASoC audio
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 0/9] OMAP4: ASoC: Support for PandaBoard family
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] ARM: OMAP: hsmmc: add max_freq field
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 8/9] OMAP4: omap4panda: Enable audio support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 03/10] arm: omap2: fix omap3 touchbook kconfig warning
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 04/10] arm: omap2: fix regulator warnings
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/10] arm: omap4: fix kconfig warning
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 8/9] OMAP4: omap4panda: Enable audio support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 4/9] ASoC: twl6040: Convert MICBIAS to SUPPLY widget
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP: device PM constraints: preparatory support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 8/9] OMAP4: omap4panda: Enable audio support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] input: serio: ams-delta: toggle keyboard power over GPIO
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 4/9] ASoC: twl6040: Convert MICBIAS to SUPPLY widget
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2 1/9] include: platform_data: Platform data header for OMAP4 ASoC audio
  • From: "Girdwood, Liam" <lrg@xxxxxx>
• Re: [PATCH] input: serio: ams-delta: toggle keyboard power over GPIO
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 3/5] ASoC: omap-mcbsp: Use the new interface for configuring CLKR/FSR mux
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/9] ASoC: twl6040: Convert MICBIAS to SUPPLY widget
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 8/9] OMAP4: omap4panda: Enable audio support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/5] ASoC: omap-mcbsp: Use the new interface for configuring CLKR/FSR mux
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 5/5] OMAP4: mcbsp: Callback function for McBSP4 CLKR/FSR mux selection
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 4/5] OMAP: mcbsp: Remove old CLKR/FSR mux functions
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 2/5] OMAP: mcbsp: Signle function for CLKR/FSR source mux configuration
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 1/5] OMAP2/3: mcbsp: Check McBSP port number in CLKR/FSR mux callback
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 0/5] OMAP4: Fix CLKR/FSR mux for port with 6 pin mode
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2 0/9] OMAP4: ASoC: Support for PandaBoard family
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2 1/9] include: platform_data: Platform data header for OMAP4 ASoC audio
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] Non critical fixes for v3.3 merge window, part2
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH v4 03/12] mfd: twl-core: Add initial DT support for twl4030/twl6030
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [GIT PULL] Borderline fixes for v3.2-rc6
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] Borderline fixes for v3.2-rc6
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL] Borderline fixes for v3.2-rc6
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 9/9] ASoC: Kconfig: OMAP4: Enable support for PandaBoards
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 8/9] OMAP4: omap4panda: Enable audio support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 7/9] ASoC: omap-abe-twl6040: Configure card according to platform data
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 5/9] ASoC: omap-abe-twl6040: Add complete DAPM routing
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 6/9] ASoC: omap-abe-twl6040: DAI link selection based on platform data
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 4/9] ASoC: twl6040: Convert MICBIAS to SUPPLY widget
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 3/9] ASoC: omap-abe-twl6040: Convert to platform deriver
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 2/9] OMAP4: 4430sdp: Register platform device for OMAP4 audio
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 1/9] include: platform_data: Platform data header for OMAP4 ASoC audio
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 0/9] OMAP4: ASoC: Support for PandaBoard family
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 2/2] OMAP4: mcbsp: Clock reparenting support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2 1/9] include: platform_data: Platform data header for OMAP4 ASoC audio
  • From: Liam Girdwood <lrg@xxxxxx>
• Re: Adding remoteproc/rpmsg to linux-next
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] OMAP3: hwmod_data: register dss hwmods after dss_core
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/11] OMAP4: Add DT support for i2c and twl6030
  • From: Rob Herring <robherring2@xxxxxxxxx>
• [PATCH v4 01/12] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v4 05/12] arm/dts: OMAP4: Add i2c controller nodes
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v4 03/12] mfd: twl-core: Add initial DT support for twl4030/twl6030
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v4 02/12] i2c: OMAP: Add DT support for i2c controller
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v4 08/12] arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v4 06/12] arm/dts: OMAP3: Add i2c controller nodes
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v4 07/12] arm/dts: twl6030: Add DTS file for twl6030 PMIC
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v4 09/12] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v4 10/12] arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v4 04/12] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v4 12/12] ARM: OMAP2+: board-generic: Remove i2c static init
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v4 11/12] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v4 00/12] OMAP4: Add DT support for i2c and twl6030
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH v2 4/9] ASoC: twl6040: Convert MICBIAS to SUPPLY widget
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2 4/9] ASoC: twl6040: Convert MICBIAS to SUPPLY widget
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 8/9] OMAP4: omap4panda: Enable audio support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2 9/9] ASoC: Kconfig: OMAP4: Enable support for PandaBoards
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] OMAP3: hwmod_data: register dss hwmods after dss_core
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH v3 02/11] i2c: OMAP: Add DT support for i2c controller
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH V2] OMAP2+: ads7846_init: put gpio_pendown into pdata if it's provided
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH v2 9/9] ASoC: Kconfig: OMAP4: Enable support for PandaBoards
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 8/9] OMAP4: omap4panda: Enable audio support
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 7/9] ASoC: omap-abe-twl6040: Configure card according to platform data
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/9] include: platform_data: Platform data header for OMAP4 ASoC audio
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 9/9] ASoC: Kconfig: OMAP4: Enable support for PandaBoards
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 8/9] OMAP4: omap4panda: Enable audio support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 7/9] ASoC: omap-abe-twl6040: Configure card according to platform data
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 6/9] ASoC: omap-abe-twl6040: DAI link selection based on platform data
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 5/9] ASoC: omap-abe-twl6040: Add complete DAPM routing
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 4/9] ASoC: twl6040: Convert MICBIAS to SUPPLY widget
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 3/9] ASoC: omap-abe-twl6040: Convert to platform deriver
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 2/9] OMAP4: 4430sdp: Register platform device for OMAP4 audio
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 1/9] include: platform_data: Platform data header for OMAP4 ASoC audio
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 0/9] OMAP4: ASoC: Support for PandaBoard family
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] OMAP3: hwmod_data: add HWMOD_INIT_NO_RESET flag for dss_dispc
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH v2 1/7 v2] ARM: OMAP1: ams-delta: register latch dependent devices later
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/7 v2] ARM: OMAP1: ams-delta: register latch dependent devices later
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: [PATCH v2 1/7 v2] ARM: OMAP1: ams-delta: register latch dependent devices later
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: Is Pandaboard cpuhotplug working stably?
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: Is Pandaboard cpuhotplug working stably?
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: hwmod_data: add HWMOD_INIT_NO_RESET flag for dss_dispc
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [linux-pm] [PATCH 0/3] coupled cpuidle state support
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [RFC PATCH v2 4/8] media: videobuf2: introduce VIDEOBUF2_PAGE memops
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 07/10] ASoC: OMAP: ams-delta: Drive modem/codec pins over GPIO API
  • From: "Girdwood, Liam" <lrg@xxxxxx>
• Re: [PATCH v3 02/11] i2c: OMAP: Add DT support for i2c controller
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [linux-pm] [PATCH 0/3] coupled cpuidle state support
  • From: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
• Re: Is Pandaboard cpuhotplug working stably?
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH] OMAP2+: ads7846_init: put gpio_pendown into pdata if it's provided
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [linux-pm] [PATCH 0/3] coupled cpuidle state support
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: Interesting L3 driver panic on v3.2-rc5 on 3530
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• [PATCH] OMAP3: hwmod_data: add HWMOD_INIT_NO_RESET flag for dss_dispc
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH 07/10] ASoC: OMAP: ams-delta: Drive modem/codec pins over GPIO API
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH v2 5/7] MTD: NAND: ams-delta: use GPIO instead of custom I/O
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH v2 1/7 v2] ARM: OMAP1: ams-delta: register latch dependent devices later
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] input: serio: ams-delta: toggle keyboard power over GPIO
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH v2 1/7 v2] ARM: OMAP1: ams-delta: register latch dependent devices later
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH v2 5/7] MTD: NAND: ams-delta: use GPIO instead of custom I/O
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [linux-pm] [PATCH 0/3] coupled cpuidle state support
  • From: Colin Cross <ccross@xxxxxxxxxxx>
• Re: [PATCH 0/3] coupled cpuidle state support
  • From: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] ARM: OMAP2+: board-generic: Replace #if defined by #ifdef for consistency
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 5/7] MTD: NAND: ams-delta: use GPIO instead of custom I/O
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] input: serio: ams-delta: toggle keyboard power over GPIO
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/7 v2] ARM: OMAP1: ams-delta: register latch dependent devices later
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] coupled cpuidle state support
  • From: Colin Cross <ccross@xxxxxxxxxxx>
• Re: [PATCH 07/10] ASoC: OMAP: ams-delta: Drive modem/codec pins over GPIO API
  • From: Liam Girdwood <lrg@xxxxxx>
• Re: [PATCH 00/10] OMAP4: ASoC: Support for PandaBoard family
  • From: Liam Girdwood <lrg@xxxxxx>
• Re: [PATCH] OMAP2+: ads7846_init: put gpio_pendown into pdata if it's provided
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: Adding remoteproc/rpmsg to linux-next
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH] OMAP2+: ads7846_init: put gpio_pendown into pdata if it's provided
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• [PATCH] OMAP2+: ads7846_init: put gpio_pendown into pdata if it's provided
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• [PATCH V3 1/2] mcx: very basic support for HTKW mcx board
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• [PATCH V3 2/2] mcx: support for HTKW mcx board
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• [PATCH V3 0/2] Support for HTKW mcx
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• [PATCH V3 2/2] mcx: support for HTKW mcx board
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• [PATCH V3 1/2] mcx: very basic support for HTKW mcx board
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• [PATCH V3 0/2] Support for HTKW mcx
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH 0/3] coupled cpuidle state support
  • From: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
• RE: ZOOM2 doesn't boot on upstream kernel
  • From: Deepthi Kiran <Deepthi_Kiran@xxxxxxxxxxxx>
• Re: Is Pandaboard cpuhotplug working stably?
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Is Pandaboard cpuhotplug working stably?
  • From: Barry Song <21cnbao@xxxxxxxxx>
• Re: [PATCH 0/3] coupled cpuidle state support
  • From: Colin Cross <ccross@xxxxxxxxxxx>
• RE: [PATCH V2] am35xx-emac: move generic EMAC init to separate file
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: Is Pandaboard cpuhotplug working stably?
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] coupled cpuidle state support
  • From: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] coupled cpuidle state support
  • From: Colin Cross <ccross@xxxxxxxxxxx>
• Is Pandaboard cpuhotplug working stably?
  • From: Barry Song <21cnbao@xxxxxxxxx>
• Re: [PATCH V2 2/2] mcx: support for HTKW mcx board
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH V2] am35xx-emac: move generic EMAC init to separate file
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH 0/3] coupled cpuidle state support
  • From: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
• [PATCH] omap: use usleep_range() instead of mdelay()/udelay()
  • From: Dmitry Antipov <dmitry.antipov@xxxxxxxxxx>
• RE: [PATCH V2] am35xx-emac: move generic EMAC init to separate file
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH] ARM: remove header files included more than once
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• RE: [PATCH] mmc: omap: remove clock rate hard coding
  • From: "Hebbar, Gururaja" <gururaja.hebbar@xxxxxx>
• Re: [PATCH] am35xx-emac: move generic EMAC init to separate file
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/3] coupled cpuidle state support
  • From: Colin Cross <ccross@xxxxxxxxxxx>
• [PATCH 1/3] cpuidle: refactor out cpuidle_enter_state
  • From: Colin Cross <ccross@xxxxxxxxxxx>
• [PATCH 3/3] cpuidle: add support for states that affect multiple cpus
  • From: Colin Cross <ccross@xxxxxxxxxxx>
• [PATCH 2/3] cpuidle: fix error handling in __cpuidle_register_device
  • From: Colin Cross <ccross@xxxxxxxxxxx>
• [PATCH] OMAP3: clock3xxx_data: change EMAC clocks aliases
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• [PATCH V2] am35xx-emac: move generic EMAC init to separate file
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH] am35xx-emac: move generic EMAC init to separate file
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• [PATCH] input: serio: ams-delta: toggle keyboard power over GPIO
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH V2] omap-serial: add RS485 mode support
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• [PATCH v2 1/7 v2] ARM: OMAP1: ams-delta: register latch dependent devices later
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH V2] omap-serial: add RS485 mode support
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH v3 02/11] i2c: OMAP: Add DT support for i2c controller
  • From: Olof Johansson <olof@xxxxxxxxx>
• [PATCH V2] omap-serial: add RS485 mode support
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH v2 1/7][RESEND] ARM: OMAP1: ams-delta: register latch dependent devices later
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [alsa-devel] [PATCH v2 1/7][RESEND] ARM: OMAP1: ams-delta: register latch dependent devices later
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH v2 1/7][RESEND] ARM: OMAP1: ams-delta: register latch dependent devices later
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/7][RESEND] ARM: OMAP1: ams-delta: register latch dependent devices later
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH V2 2/2] mcx: support for HTKW mcx board
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• [GIT PULL] ARM: OMAP: device PM constraints: preparatory support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/3] usb: musb: fix pm_runtime mismatches
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: Interesting L3 driver panic on v3.2-rc5 on 3530
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH v2 1/7][RESEND] ARM: OMAP1: ams-delta: register latch dependent devices later
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] Borderline fixes for v3.2-rc6
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL] Borderline fixes for v3.2-rc6
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 07/11] arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH v3 07/11] arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH v3 02/11] i2c: OMAP: Add DT support for i2c controller
  • From: Rob Herring <robherring2@xxxxxxxxx>
• [PATCH v3 03/11] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v3 02/11] i2c: OMAP: Add DT support for i2c controller
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v3 11/11] ARM: OMAP2+: board-generic: Remove i2c static init
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v3 09/11] arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v3 06/11] arm/dts: twl6030: Add DTS file for twl6030 PMIC
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v3 10/11] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v3 08/11] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v3 07/11] arm/dts: twl4030: Add DTS file for twl4030 PM + Audio IC
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v3 05/11] arm/dts: OMAP3: Add i2c controller nodes
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v3 04/11] arm/dts: OMAP4: Add i2c controller nodes
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v3 01/11] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v3 00/11] OMAP4: Add DT support for i2c and twl6030
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH v2 04/10] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR
  • From: Aneesh V <aneesh@xxxxxx>
• [PATCH v2 5/5] ARM: OMAP2+: board-generic: Use of_irq_init API
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 4/5] arm/dts: OMAP3: Add interrupt-controller bindings for INTC
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 3/5] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 1/5] arm/dts: OMAP4: Update DTS file with new GIC bindings
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 2/5] ARM: OMAP2/3: intc: Add irqdomain support
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 0/5] ARM: OMAP2+: Interrupt controllers adaptation to DT
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH 3/3] ARM: OMAP2+: board-generic: Replace #if defined by #ifdef for consistency
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: Interesting L3 driver panic on v3.2-rc5 on 3530
  • From: Archit Taneja <a0393947@xxxxxx>
• Re: [PATCH V2 0/2] OMAPDSS: DISPC: Peformance improvement of DISPC Scaling
  • From: "Mahapatra, Chandrabhanu" <cmahapatra@xxxxxx>
• RE: [PATCH-V4 0/3] Introducing TI's New SoC/board AM335XEVM
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH v2 4/4] musb: omap2430: avoid pm_runtime_disable()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 3/4] usb: musb: remove a bit of indentation
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 2/4] usb: musb: trivial cleanup
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] usb: musb: fix pm_runtime mismatch
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/3] usb: musb: fix pm_runtime mismatches
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH] AM35xx: disable checking for reserved feature bits
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH 4/9] usb: renesas: gadget: use generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR
  • From: Aneesh V <aneesh@xxxxxx>
• Re: [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR
  • From: Aneesh V <aneesh@xxxxxx>
• Re: [PATCH] ARM: OMAP: avoid NULL pointer dereference when no PMIC is configured
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3] OMAP: DSS2: Support for UMSH-8173MD TFT panel
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH] mmc: omap: remove clock rate hard coding
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [PATCH] mmc: omap: remove clock rate hard coding
  • From: Venkatraman S <svenkatr@xxxxxx>
• [RFC PATCH] arm:omap:omap4: Remove hardcoded reg-offs for PWRSTCTRL & PWRSTST
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• Re: [PATCH v3 2/2] OMAPDSS: HDMI: Disable DDC internal pull up
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v3 2/2] OMAPDSS: HDMI: Disable DDC internal pull up
  • From: <mythripk@xxxxxx>
• [PATCH v2 1/2] OMAPDSS: HDMI: Move duplicate code from boardfile
  • From: <mythripk@xxxxxx>
• Re: [PATCH v2] OMAP: DSS2: Support for UMSH-8173MD TFT panel
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH V2 0/2] OMAPDSS: DISPC: Peformance improvement of DISPC Scaling
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] OMAP: I2C: add devexit to the remove code
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• Re: [RFC v2 PATCH 2/3] dt: device tree bindings for TI's EMIF sdram controller
  • From: Aneesh V <aneesh@xxxxxx>
• Re: [RFC v2 PATCH 2/3] dt: device tree bindings for TI's EMIF sdram controller
  • From: Aneesh V <aneesh@xxxxxx>
• Re: [RFC v2 PATCH 1/3] dt: device tree bindings for DDR memories
  • From: Aneesh V <aneesh@xxxxxx>
• Re: [GIT PULL] omap prcm changes for v3.3 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL] omap uart runtime PM support for v3.2 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL] Borderline fixes for v3.2-rc6
  • From: Olof Johansson <olof@xxxxxxxxx>
• RE: [PATCH-V3 2/2] arm:omap: cleanup & split omap2/3/4_check_revision function
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH 4/9] usb: renesas: gadget: use generic map/unmap routines
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH v2 2/7 v2] ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH v2 2/7] ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/9] usb: renesas: gadget: use generic map/unmap routines
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH v2 2/7] ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH v2 2/7] ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] regulator: twl: adapt twl-regulator driver to dt
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/7] ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 04/10] include: platform_data: Platform data header for OMAP4 ASoC audio
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP3/4: miscellaneous hwmod data updates
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/10] arm: omap4: fix kconfig warning
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 03/10] arm: omap2: fix omap3 touchbook kconfig warning
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 04/10] arm: omap2: fix regulator warnings
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: Interesting L3 driver panic on v3.2-rc5 on 3530
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCHv8 4/5] twl4030: add support for external voltage get/set
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 04/10] include: platform_data: Platform data header for OMAP4 ASoC audio
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/7] ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] OMAP3: don't init PM on AM35{05,17}
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH-V3 2/2] arm:omap: cleanup & split omap2/3/4_check_revision function
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2 1/7][RESEND] ARM: OMAP1: ams-delta: register latch dependent devices later
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v2 6/7] omapfb: lcd_ams_delta: drive control lines over GPIO
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v2 7/7] input: serio: ams-delta: toggle keyboard power over GPIO
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v2 2/7] ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v2 3/7] ARM: OMAP1: ams-delta: supersede custom led device by leds-gpio
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v2 5/7] MTD: NAND: ams-delta: use GPIO instead of custom I/O
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v2 4/7] LED: drop leds-ams-delta driver
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v2 0/7] ARM: OMAP1: ams-delta: replace custom I/O with GPIO
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR
  • From: Rob Herring <robherring2@xxxxxxxxx>
• linux-3.0: system suspend leaves usbhost clocks enabled
  • From: Peter Barada <peter.barada@xxxxxxxxxxx>
• [GIT PULL] ARM: OMAP3/4: miscellaneous hwmod data updates
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v4 1/5] OMAP4: hwmod: Add names for DMIC memory address space
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [RFC PATCH v2 1/8] omap4: introduce fdif(face detect module) hwmod
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 3/6] OMAP: PM: register to the per-device PM QoS framework
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/6] OMAP2+: omap_hwmod: manage the wake-up latency constraints
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v6 0/6] PM QoS: implement the OMAP low level constraints management code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [GIT PULL] Non critical fixes for v3.3 merge window, part2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] usb: musb: fix pm_runtime mismatches
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2 0/4] musb fixes and cleanups
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2 3/4] usb: musb: remove a bit of indentation
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2 1/4] usb: musb: fix pm_runtime mismatches
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 1/3] usb: musb: fix pm_runtime mismatches
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2 2/4] usb: musb: trivial cleanup
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v2 4/4] musb: omap2430: avoid pm_runtime_disable()
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [GIT PULL] omap uart runtime PM support for v3.2 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2] usb: musb: fix pm_runtime mismatch
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [GIT PULL] omap prcm changes for v3.3 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] omap ehci related changes for v3.3 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] omap hwmod changes for v3.3 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] Borderline fixes for v3.2-rc6
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 04/10] include: platform_data: Platform data header for OMAP4 ASoC audio
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP: I2C: prepare to use hwmod reset in driver
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [RFC v2 PATCH 2/3] dt: device tree bindings for TI's EMIF sdram controller
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: ZOOM2 doesn't boot on upstream kernel
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [RFC v2 PATCH 2/3] dt: device tree bindings for TI's EMIF sdram controller
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH v2 04/10] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [RFC v2 PATCH 1/3] dt: device tree bindings for DDR memories
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP: I2C: prepare to use hwmod reset in driver
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 1/9] usb: gadget: add generic map/unmap request utilities
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v4 1/4] OMAP3: hwmod data: add mmu data for iva and isp
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 8/9] usb: gadget: net2280: use generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/9] usb: gadget: add generic map/unmap request utilities
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 8/9] usb: gadget: net2280: use generic map/unmap routines
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/9] usb: gadget: add generic map/unmap request utilities
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [RFC v2 PATCH 3/3] arm/dts: EMIF and lpddr2 device tree data for OMAP4 boards
  • From: Aneesh V <aneesh@xxxxxx>
• [RFC v2 PATCH 2/3] dt: device tree bindings for TI's EMIF sdram controller
  • From: Aneesh V <aneesh@xxxxxx>
• [RFC v2 PATCH 1/3] dt: device tree bindings for DDR memories
  • From: Aneesh V <aneesh@xxxxxx>
• [RFC v2 PATCH 0/3] dt: device tree bindings and data for EMIF and DDR
  • From: Aneesh V <aneesh@xxxxxx>
• Re: [PATCH 04/10] include: platform_data: Platform data header for OMAP4 ASoC audio
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 1/3] of/base: Take NULL string into account for property with multiple strings
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH v2 03/10] mfd: twl-core: Add initial DT support for twl4030/twl6030
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 0/3] of: Add support for named irq and reg
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 9/9] usb: gadget: goku: use generic map/unmap routines
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 9/9] usb: gadget: goku: use generic map/unmap routines
  • From: Sergei Shtylyov <braindead@xxxxxxxxx>
• Re: [PATCH 9/9] usb: gadget: goku: use generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 9/9] usb: gadget: goku: use generic map/unmap routines
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] OMAPDSS: HDMI: Disable DDC internal pull up
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v2 2/2] OMAPDSS: HDMI: Disable DDC internal pull up
  • From: <mythripk@xxxxxx>
• [PATCH v2 1/2] OMAPDSS: HDMI: Move duplicate code from boardfile
  • From: <mythripk@xxxxxx>
• Re: [PATCH v2 03/10] mfd: twl-core: Add initial DT support for twl4030/twl6030
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• [PATCH 1/9] usb: gadget: add generic map/unmap request utilities
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/9] usb: gadget: langwell: use generic map/unmap functions
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/9] Add a generic request map/unmap routine
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/9] usb: dwc3: gadget: use generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/9] usb: renesas: gadget: use generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 5/9] usb: gadget: amd5536: use generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 6/9] usb: gadget: r8a66597: use generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 7/9] usb: gadget: net2272: use generic map/umap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 8/9] usb: gadget: net2280: use generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 9/9] usb: gadget: goku: use generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH-V3 2/2] arm:omap: cleanup & split omap2/3/4_check_revision function
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH-V3 1/2] arm:omap: Make cpu_rev static global variable
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH-V3 0/2] arm:omap:cleanup & split omap2/3/4_check_revision function
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• Re: [PATCHv8 4/5] twl4030: add support for external voltage get/set
  • From: "Girdwood, Liam" <lrg@xxxxxx>
• Re: [PATCH 2/2] OMAPDSS: HDMI: Disable DDC internal pull up
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH V2 2/2] OMAPDSS: DISPC: Update Scaling Clock Logic
  • From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
• [PATCH V2 1/2] OMAPDSS: DISPC: Update Fir Coefficients
  • From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
• [PATCH V2 0/2] OMAPDSS: DISPC: Peformance improvement of DISPC Scaling
  • From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
• Re: [PATCHv8 4/5] twl4030: add support for external voltage get/set
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] OMAPDSS: HDMI: Disable DDC internal pull up
  • From: "K, Mythri P" <mythripk@xxxxxx>
• Re: [PATCH 4/4] ASoC: OMAP: HDMI: Move HDMI codec trigger function to generic HDMI driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/3] usb: musb: fix pm_runtime mismatches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] ARM: OMAP: avoid NULL pointer dereference when no PMIC is configured
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: omap3isp hangs with 3.2-rc2
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [QUESTION] How to set static/dynamic dependency between clock domains
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Problems booting recent kernels on AM3517
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH] davinci-cpdma: fix locking issue in cpdma_chan_stop
  • From: "Palande, Ameya" <ameya.palande@xxxxxx>
• Re: omap3isp hangs with 3.2-rc2
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH] davinci-cpdma: fix locking issue in cpdma_chan_stop
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• [PATCH] ARM: OMAP: avoid NULL pointer dereference when no PMIC is configured
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH V2 1/2] mcx: very basic support for HTKW mcx board
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP: I2C: prepare to use hwmod reset in driver
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCH v5 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable
  • From: Olof Johansson <olof@xxxxxxxxx>
• [PATCH] ARM: OMAP: fix erroneous mmc2 clock change on mmc3 setup
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• RE: [PATCH-V2] arm:omap: cleanup & split omap2/3/4_check_revision function
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH v4] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: Martin Hostettler <martin@xxxxxxxxxxxxxxxxxxxxxx>
• Re: Re: [PATCH 04/10] include: platform_data: Platform data header for OMAP4 ASoC audio
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ASoC: omap-mcbsp: Enable FIFO usage on OMAP4
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] OMAP4: mcbsp: Enable FIFO usage
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] cpupower: Add cpupower-idle-info manpage
  • From: Thomas Renninger <trenn@xxxxxxx>
• Re: Interesting L3 driver panic on v3.2-rc5 on 3530
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Interesting L3 driver panic on v3.2-rc5 on 3530
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2 1/2] mcx: very basic support for HTKW mcx board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] OMAPDSS: HDMI: HPD support in boardfile
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH-V2] arm:omap: cleanup & split omap2/3/4_check_revision function
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 5/6] clk: basic gateable and fixed-rate clks
  • From: "Turquette, Mike" <mturquette@xxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: "Turquette, Mike" <mturquette@xxxxxx>
• Re: [PATCH 2/2] OMAP4: mcbsp: Clock reparenting support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP: I2C: prepare to use hwmod reset in driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 0/4] OMAP serial device tree support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 0/4] OMAP serial device tree support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 0/4] OMAP serial device tree support
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH v3 0/4] OMAP serial device tree support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP: I2C: prepare to use hwmod reset in driver
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] ASoC: OMAP: HDMI: Prevent DSS module from going idle when playing audio
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ASoC: OMAP: HDMI: Prevent DSS module from going idle when playing audio
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: ZOOM2 doesn't boot on upstream kernel
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP: I2C: prepare to use hwmod reset in driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP: I2C: prepare to use hwmod reset in driver
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP: EHCI/OHCI: convert to runtime PM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: PRCM: add chained PRCM interrupt handler
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP: I2C: prepare to use hwmod reset in driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP3/4: hwmod data changes for 3.3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP4: hwmod: Don't wait for the idle status if modulemode is not supported
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP3: hwmod data fixes for 3.2-rc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP4: clock: Add CPU local timer clock node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP AM3517/3505: fix crash on boot due to incorrect voltagedomain data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] OMAP: UART cleanup and runtime PM conversion for v3.3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4] ARM: OMAP2+: hwmod: Add a new flag to handle hwmods left enabled at init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] OMAP4: mcbsp: Enable FIFO usage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2] OMAP: DSS2: Support for UMSH-8173MD TFT panel
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCHv8 3/5] OMAP: I2C: Reset support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] OMAP: DSS2: Support for UMSH-8173MD TFT panel
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH] ASoC: OMAP: HDMI: Prevent DSS module from going idle when playing audio
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: problem with twl4030 GPIO irqs
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• [PATCH v5 REPOST 3/5] omap4: Unconditionally require l2x0 L2 cache controller support
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [QUESTION] How to set static/dynamic dependency between clock domains
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/4] cpupower: Add cpupower-idle-info manpage
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [QUESTION] How to set static/dynamic dependency between clock domains
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [QUESTION] How to set static/dynamic dependency between clock domains
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [QUESTION] How to set static/dynamic dependency between clock domains
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [QUESTION] How to set static/dynamic dependency between clock domains
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [QUESTION] How to set static/dynamic dependency between clock domains
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [RFC PATCH v2 1/8] omap4: introduce fdif(face detect module) hwmod
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v4 1/5] OMAP4: hwmod: Add names for DMIC memory address space
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH 1/4] cpupower: Add cpupower-idle-info manpage
  • From: Thomas Renninger <trenn@xxxxxxx>
• Re: [QUESTION] How to set static/dynamic dependency between clock domains
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCHv5] OMAP: I2C: Fix the interrupt clearing in OMAP4
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [QUESTION] How to set static/dynamic dependency between clock domains
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [GIT PULL] ARM: OMAP2+: PRCM: add chained PRCM interrupt handler
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv12 0/9] OMAP3+: PRCM chain handler
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH v2] ARM: OMAP4: hwmod: Don't wait for the idle status if modulemode is not supported
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v4] ARM: OMAP2+: hwmod: Add a new flag to handle hwmods left enabled at init
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 3/3] ARM: OMAP: hwmod: Look for hwmod/module level context lost count if supported
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 3/3] ARM: OMAP: hwmod: Look for hwmod/module level context lost count if supported
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 3/3] ARM: OMAP: hwmod: Look for hwmod/module level context lost count if supported
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 3/3] ARM: OMAP: hwmod: Look for hwmod/module level context lost count if supported
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 3/3] ARM: OMAP: hwmod: Look for hwmod/module level context lost count if supported
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH-V2] arm:omap: cleanup & split omap2/3/4_check_revision function
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH] ARM: OMAP4: clock: Add CPU local timer clock node
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [GIT PULL] ARM: OMAP: EHCI/OHCI: convert to runtime PM
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH] AM35xx: disable checking for reserved feature bits
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• [GIT PULL] ARM: OMAP3/4: hwmod data changes for 3.3
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 3/3] ARM: OMAP: hwmod: Look for hwmod/module level context lost count if supported
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 3/3] ARM: OMAP: hwmod: Look for hwmod/module level context lost count if supported
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v3] ARM: OMAP2+: hwmod: Add a new state to handle hwmods left enabled at init
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v3] ARM: OMAP2+: hwmod: Add a new state to handle hwmods left enabled at init
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Fix: Don't wait for the idle status if modulemode is not supported
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: Fix: Don't wait for the idle status if modulemode is not supported
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [GIT PULL] ARM: OMAP: I2C: prepare to use hwmod reset in driver
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v5 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: Should I worry about "omap-mcbsp.2: alias fck already exists" or is it expected?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] ASoC: OMAP: HDMI: Prevent DSS module from going idle when playing audio
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] ASoC: OMAP: HDMI: Prevent DSS module from going idle when playing audio
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] ASoC: OMAP: HDMI: Prevent DSS module from going idle when playing audio
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv8 4/5] OMAP: I2C: Remove the reset in the init path
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCHv8 3/5] OMAP: I2C: Reset support
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCHv8 3/5] OMAP: I2C: Reset support
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] ASoC: OMAP: HDMI: Prevent DSS module from going idle when playing audio
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCHv8 2/5] OMAP: hwmod/device : add omap_device_reset to reset all the hwmods in the device
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv8 5/5] OMAP: I2C: Remove the SYSC register definition
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv8 4/5] OMAP: I2C: Remove the reset in the init path
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv8 3/5] OMAP: I2C: Reset support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/2] OMAPDSS: DISPC: Update Fir Coefficients
  • From: "Mahapatra, Chandrabhanu" <cmahapatra@xxxxxx>
• Re: [PATCHv8 1/5] OMAP3+: HWMOD: Add the default clockactivity for I2C
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] ASoC: OMAP: HDMI: Prevent DSS module from going idle when playing audio
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v9 00/31] gpio/omap: driver cleanup and fixes
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• [GIT PULL] ARM: OMAP3: hwmod data fixes for 3.2-rc
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] ASoC: OMAP: HDMI: Prevent DSS module from going idle when playing audio
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/2] OMAPDSS: DISPC: Update Fir Coefficients
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] ASoC: OMAP: HDMI: Prevent DSS module from going idle when playing audio
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2] ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] ARM: OMAP AM3517/3505: fix crash on boot due to incorrect voltagedomain data
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: ZOOM2 doesn't boot on upstream kernel
  • From: deepthi <deepthi_kiran@xxxxxxxxxxxx>
• Re: [PATCH v9 00/31] gpio/omap: driver cleanup and fixes
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [GIT PULL] two omap fixes for v3.2-rc5
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL] omap board changes for v3.3 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL] omap musb platform init updates for v3.3 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL] SoC changes for omap4470, ti814x, am33xx for v3.3 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• [PATCH-V1] arm/dts: Add support for TI OMAP3 EVM board
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• [PATCH] ASoC: OMAP: HDMI: Prevent DSS module from going idle when playing audio
  • From: Ricardo Neri <ricardo.neri@xxxxxx>
• [PATCH 2/4] ASoC: OMAP: HDMI: Correct signature of ASoC functions
  • From: Ricardo Neri <ricardo.neri@xxxxxx>
• [PATCH 0/4] OMAPDSS/ASoC: Repair broken HDMI audio in K3.2-rcX
  • From: Ricardo Neri <ricardo.neri@xxxxxx>
• [PATCH 3/4] OMAPDSS: HDMI: Create function to enable HDMI audio
  • From: Ricardo Neri <ricardo.neri@xxxxxx>
• [PATCH 1/4] ASoC: OMAP: HDMI: Introduce driver data for audio codec
  • From: Ricardo Neri <ricardo.neri@xxxxxx>
• [PATCH 4/4] ASoC: OMAP: HDMI: Move HDMI codec trigger function to generic HDMI driver
  • From: Ricardo Neri <ricardo.neri@xxxxxx>
• RE: [PATCH] arm/dts: Add support for OMAP3 Mistral EVM board
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH v4 1/5] OMAP4: hwmod: Add names for DMIC memory address space
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] am35xx-emac: move generic EMAC init to separate file
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] arm/dts: Add support for OMAP3 Mistral EVM board
  • From: Vaibhav Hiremath <hvaibhav@xxxxxx>
• Re: [RFC PATCH v2 1/8] omap4: introduce fdif(face detect module) hwmod
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv12 0/9] OMAP3+: PRCM chain handler
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/2] OMAPDSS: DISPC: Update Fir Coefficients
  • From: "Mahapatra, Chandrabhanu" <cmahapatra@xxxxxx>
• Re: [PATCH] arm/dts: Add minimal device tree support for omap2420 and omap2430
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 1/3] usb: musb: fix pm_runtime mismatches
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH v4 1/4] OMAP3: hwmod data: add mmu data for iva and isp
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: problem with twl4030 GPIO irqs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Interrupt issue in twl4030_keypad
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 1/3] usb: musb: fix pm_runtime mismatches
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: problem with twl4030 GPIO irqs
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: problem with twl4030 GPIO irqs
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH v4 3/4] OMAP3/4: iommu: migrate to hwmod framework
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v4 1/4] OMAP3: hwmod data: add mmu data for iva and isp
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v4 REPOST 2/5] ARM: SMP: Refactor Kconfig to be more maintainable
  • From: David Brown <davidb@xxxxxxxxxxxxxx>
• problem with twl4030 GPIO irqs
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH 1/3] usb: musb: fix pm_runtime mismatches
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] musb fixes and cleanups
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 1/3] usb: musb: fix pm_runtime mismatches
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 2/3] usb: musb: trivial cleanup
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH 3/3] usb: musb: remove a bit of indentation
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: Issue with isp1704 loaded too soon
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH V2 1/2] mcx: very basic support for HTKW mcx board
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH] am35xx-emac: move generic EMAC init to separate file
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH 1/9] ARM: OMAP2+: mux: add wakeup-capable hwmod mux entries to dynamic list
  • From: Tony Lindgren <tony@xxxxxxxxxxx>