* Rob Herring <robherring2@xxxxxxxxx> [111216 13:30]: > Tony, > > On 12/16/2011 03:57 PM, Tony Lindgren wrote: > > Rob, > > > > * Rob Herring <robherring2@xxxxxxxxx> [111214 05:16]: > >> On 12/14/2011 05:55 AM, Rajendra Nayak wrote: > >>> v3 is rebased on top of the latest serial runtime > >>> patches[1] and boot tested with/without DT on OMAP4 > >>> SDP and OMAP4 Panda boards. > >>> > >>> Patches can be found here.. > >>> git://gitorious.org/omap-pm/linux.git for-dt/serial > >>> > >>> I also had to pull in a fix[2] for DT testing (already in linux-omap > >>> master) which was missing as the serial runtime branch[1] > >>> was based on an older master commit. > >>> > >>> Changes in v3: > >>> -1- Rebased on latest serial runtime patches > >>> -2- Minor typr fixes > >>> > >>> Changes in v2: > >>> -1- Got rid of binding to define which uart is console > >>> -2- Added checks to default clock speed to 48Mhz > >>> -3- Added compatible for each OMAP family > >>> -4- Used of_alias_get_id to populate port.line > >>> > >>> [1] git://gitorious.org/runtime_3-0/runtime_3-0.git for_3_3/lo_rc4_uartruntime > >>> [2] http://www.spinics.net/lists/arm-kernel/msg150751.html > >>> > >>> Rajendra Nayak (4): > >>> omap-serial: Get rid of all pdev->id usage > >>> omap-serial: Use default clock speed (48Mhz) if not specified > >>> omap-serial: Add minimal device tree support > >>> ARM: omap: pass minimal SoC/board data for UART from dt > >>> > >>> .../devicetree/bindings/serial/omap_serial.txt | 10 +++ > >>> arch/arm/boot/dts/omap3.dtsi | 31 ++++++++ > >>> arch/arm/boot/dts/omap4.dtsi | 28 +++++++ > >>> arch/arm/mach-omap2/board-generic.c | 1 - > >>> drivers/tty/serial/omap-serial.c | 80 +++++++++++++++---- > >>> 5 files changed, 132 insertions(+), 18 deletions(-) > >>> create mode 100644 Documentation/devicetree/bindings/serial/omap_serial.txt > >> > >> Looks good. For the series: > >> > >> Reviewed-by: Rob Herring <rob.herring@xxxxxxxxxxx> > > > > Care to check if your Reviewed-by can also be applied > > to the additional patch "[PATCH] arm/dts: Add minimal device > > tree support for omap2420 and omap2430" that's needed > > to keep serial port working for omap2 with this series? > > It looks fine. OK thanks. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
