Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH] arm/dts: Add minimal device tree support for omap2420 and omap2430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/9] ARM: OMAP: PRCM: add suspend prepare / finish support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 4/9] ARM: OMAP: PRCM: add support for chain interrupt handler
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 3/9] ARM: OMAP3/4: PRM: add functions to read pending IRQs, PRM barrier
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 8/9] ARM: OMAP3: pm: use prcm chain handler
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 7/9] ARM: OMAP: hwmod: add support for selecting mpu_irq for each wakeup pad
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 6/9] ARM: OMAP2+: mux: add support for PAD wakeup interrupts
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 9/9] ARM: OMAP4: PRM: use PRCM interrupt handler
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/9] ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/9] ARM: OMAP2+: mux: add wakeup-capable hwmod mux entries to dynamic list
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCHv12 0/9] OMAP3+: PRCM chain handler
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH] am35xx-emac: move generic EMAC init to separate file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 REPOST 2/5] ARM: SMP: Refactor Kconfig to be more maintainable
  • From: David Brown <davidb@xxxxxxxxxxxxxx>
• Re: Issue with isp1704 loaded too soon
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH v5 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• [PATCH v5 4/5] highbank: Unconditionally require l2x0 L2 cache controller support
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• [PATCH v5 2/5] ARM: SMP: Refactor Kconfig to be more maintainable
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• [PATCH v5 3/5] omap4: Unconditionally require l2x0 L2 cache controller support
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• [PATCH v5 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• [PATCH v5 0/5] Refactor common Kconfigs for easier maintenance
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller
  • From: Rob Herring <robherring2@xxxxxxxxx>
• [PATCHv3 3/7] ARM: OMAP4 PM: Add IO Daisychain support
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• Re: [PATCH v4 REPOST 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: Re: [PATCH 04/10] include: platform_data: Platform data header for OMAP4 ASoC audio
  • From: Péter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: Re: Re: Re: [PATCH 06/10] ASoC: omap-abe-twl6040: Convert to platform deriver
  • From: Péter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v3] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH V2 1/2] mcx: very basic support for HTKW mcx board
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH V2 2/2] mcx: support for HTKW mcx board
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH v3] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH V2 1/2] mcx: very basic support for HTKW mcx board
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH V2 1/2] mcx: very basic support for HTKW mcx board
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH] am35xx-emac: move generic EMAC init to separate file
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• [PATCH 2/2] OMAP4: mcbsp: Clock reparenting support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 1/2] OMAP2+: mcbsp: Restructure clk reparenting code
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 0/2] OMAP4: McBSP: Fix clock reparenting
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] plat-omap: mcbsp: Configure wakeup in later phase
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 2/2] ASoC: omap-mcbsp: Enable FIFO usage on OMAP4
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 1/2] OMAP4: mcbsp: Enable FIFO usage
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 0/2] OMAP4: McBSP: ASoC: Fix FIFO configuration
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 1/2] OMAPDSS: DISPC: Update Fir Coefficients
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: Re: Re: [PATCH 06/10] ASoC: omap-abe-twl6040: Convert to platform deriver
  • From: Péter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v4 4/4] OMAP3/4: iommu: adapt to runtime pm
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v4 3/4] OMAP3/4: iommu: migrate to hwmod framework
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v4 2/4] OMAP4: hwmod data: add mmu hwmod for ipu and dsp
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v4 1/4] OMAP3: hwmod data: add mmu data for iva and isp
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v4 0/4] OMAP: iommu: hwmod support and runtime PM
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• Re: [PATCH v4 REPOST 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v4 REPOST 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH v4 REPOST 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [GIT PULL] OMAP: UART cleanup and runtime PM conversion for v3.3
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH V2 2/2] mcx: support for HTKW mcx board
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• [PATCH V2 1/2] mcx: very basic support for HTKW mcx board
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• [PATCH V2 0/2] Support for HTKW mcx
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Re: [PATCH v2 07/10] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/2] OMAP: PM: remove the latency related functions from the API
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/2] OMAP: convert I2C driver to PM QoS for latency constraints
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] am35xx-emac: move generic EMAC init to separate file
  • From: Ilya Yanok <yanok@xxxxxxxxxxx>
• Issue with isp1704 loaded too soon
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: mcbsp: Fix possible memory corruption
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] two omap fixes for v3.2-rc5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 REPOST 3/5] omap4: Unconditionally require l2x0 L2 cache controller support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v4] ARM: OMAP3LOGIC: Adding DSS support
  • From: Alex <alexgershgorin@xxxxxxxxx>
• Re: [PATCH v4 REPOST 3/5] omap4: Unconditionally require l2x0 L2 cache controller support
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: mcbsp: Fix possible memory corruption
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• [PATCH] OMAP3: RX-51: add explicit mux configuration of tsc2005 control gpios
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• Re: [PATCH v3] OMAP3: RX-51: complete tsc2005 controller support
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• Re: [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [GIT PULL] SoC changes for omap4470, ti814x, am33xx for v3.3 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] omap musb platform init updates for v3.3 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] omap board changes for v3.3 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] SoC changes for omap4470, ti814x, am33xx for v3.3 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] Revert "ARM: RX-51: Enable isp1704 power on/off"
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: "Turquette, Mike" <mturquette@xxxxxx>
• Re: [PATCH v3 0/4] OMAP serial device tree support
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v4 REPOST 3/5] omap4: Unconditionally require l2x0 L2 cache controller support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 REPOST 3/5] omap4: Unconditionally require l2x0 L2 cache controller support
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCH v3] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: martin@xxxxxxxxxxxxxxxxxxxxxx
• Re: [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] of/base: Take NULL string into account for property with multiple strings
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 REPOST 2/5] ARM: SMP: Refactor Kconfig to be more maintainable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 REPOST 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 REPOST 3/5] omap4: Unconditionally require l2x0 L2 cache controller support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: martin@xxxxxxxxxxxxxxxxxxxxxx
• Re: [PATCH 08/10] OMAP4: omap4panda: Enable audio support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 05/10] OMAP4: 4430sdp: Register platform device for OMAP4 audio
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] OMAP3: RX-51: complete tsc2005 controller support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 0/4] OMAP serial device tree support
  • From: Alan Cox <alan@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH v2 07/10] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• [PATCHV2 REPOST 2/7] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCHV2 REPOST 4/7] ARM: OMAP3 PM: Enable IO Wake up
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCHV2 REPOST 3/7] ARM: OMAP4 PM: Add IO Daisychain support
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCHV2 REPOST 0/7] ARM: OMAP3PLUS PM: Add IO DaisyChain support via hwmod mux
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCHV2 REPOST 7/7] ARM: OMAP3 PM: Enable IO Daisychain for supported chips
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCHV2 REPOST 1/7] ARM: OMAP3 PM: correct enable/disable of daisy io chain
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCHV2 REPOST 5/7] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCHV2 REPOST 6/7] ARM: OMAP3 PM: Remove IO Daisychain control from cpuidle
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• Re: [PATCH] OMAP3: RX-51: complete tsc2005 controller support
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxx>
• Re: [PATCH] OMAP3: RX-51: complete tsc2005 controller support
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• [PATCH v3] OMAP3: RX-51: complete tsc2005 controller support
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxx>
• Re: [PATCH v2] OMAP3: RX-51: complete tsc2005 controller support
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxx>
• Re: [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v3 0/4] OMAP serial device tree support
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 1/1] omap3: add definition for CONTROL_CAMERA_PHY_CTRL
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• RE: [PATCH v3] ARM: OMAP3LOGIC: Adding DSS support
  • From: Alex Gershgorin <alexg@xxxxxxxxxxxxxx>
• Re: [PATCH v4 REPOST 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCH 0/2] OMAP: PM: switch from omap_pm_ functions to PM QoS
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v5 0/6] PM QoS: implement the OMAP low level constraints management code
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 6/6] OMAP3: powerdomain data: add wake-up latency figures
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 5/6] OMAP3: update cpuidle latency and threshold figures
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 4/6] OMAP3: cpuidle: next C-state decision depends on the PM QoS MPU and CORE constraints
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 3/6] OMAP: PM: register to the per-device PM QoS framework
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 2/6] OMAP2+: omap_hwmod: manage the wake-up latency constraints
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 1/6] OMAP2+: powerdomain: control power domains next state
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH v6 0/6] PM QoS: implement the OMAP low level constraints management code
  • From: jean.pihet@xxxxxxxxxxxxxx
• Re: [PATCH v3 0/4] OMAP serial device tree support
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH v2] OMAP3: RX-51: complete tsc2005 controller support
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH v3] ARM: OMAP3LOGIC: Adding DSS support
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH v4 REPOST 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxx>
• [RFC PATCH v2 2/8] omap4: build fdif omap device from hwmod
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [RFC PATCH v2 3/8] media: videobuf2: move out of setting pgprot_noncached from vb2_mmap_pfn_range
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [RFC PATCH v2 5/8] media: v4l2-ioctl: support 64/32 compatible array parameter
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [RFC PATCH v2 6/8] media: v4l2: introduce two IOCTLs for object detection
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [RFC PATCH v2 8/8] media: video: introduce omap4 face detection module driver
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [RFC PATCH v2 7/8] media: video: introduce object detection driver module
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [RFC PATCH v2 4/8] media: videobuf2: introduce VIDEOBUF2_PAGE memops
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [RFC PATCH v2 1/8] omap4: introduce fdif(face detect module) hwmod
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [RFC PATCH v2 0/7] media: introduce object detection(OD) driver
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH v4 REPOST 4/5] highbank: Unconditionally require l2x0 L2 cache controller support
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCH v3 0/4] OMAP serial device tree support
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH v4 REPOST 4/5] highbank: Unconditionally require l2x0 L2 cache controller support
  • From: Rob Herring <robherring2@xxxxxxxxx>
• [PATCH] ARM: OMAP: hsmmc: add max_freq field
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v3] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 REPOST 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v2] OMAP3: RX-51: complete tsc2005 controller support
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxx>
• [PATCH] OMAP3: RX-51: complete tsc2005 controller support
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxx>
• [PATCH] Linux OMAP: Add omap_reserve functionality
  • From: Alex <alexg@xxxxxxxxxxxxxx>
• [PATCH v3] ARM: OMAP3LOGIC: Adding DSS support
  • From: Alex <alexg@xxxxxxxxxxxxxx>
• RE: [PATCH v2] ARM: OMAP3LOGIC: Adding DSS support
  • From: Alex Gershgorin <alexg@xxxxxxxxxxxxxx>
• Re: [PATCH v4 REPOST 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• [PATCH v3 3/4] omap-serial: Add minimal device tree support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 1/4] omap-serial: Get rid of all pdev->id usage
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 4/4] ARM: omap: pass minimal SoC/board data for UART from dt
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 0/4] OMAP serial device tree support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v3 2/4] omap-serial: Use default clock speed (48Mhz) if not specified
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v4 REPOST 5/5] imx6q: Remove unconditional dependency on l2x0 L2 cache support
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• [PATCH v4 REPOST 3/5] omap4: Unconditionally require l2x0 L2 cache controller support
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• [PATCH v4 REPOST 4/5] highbank: Unconditionally require l2x0 L2 cache controller support
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• [PATCH v4 REPOST 2/5] ARM: SMP: Refactor Kconfig to be more maintainable
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• [PATCH v4 REPOST 1/5] ARM: l2x0/pl310: Refactor Kconfig to be more maintainable
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• [PATCH v4 REPOST 0/5] Refactor common Kconfigs for easier maintenance
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: Re: [PATCH 06/10] ASoC: omap-abe-twl6040: Convert to platform deriver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 03/10] ASoC: omap-abe-twl6040: Correct internal prefix, Kconfig entry
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/10] ASoC: OMAP4: Rename the sdp4430 machine driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: Re: [PATCH 06/10] ASoC: omap-abe-twl6040: Convert to platform deriver
  • From: Péter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [alsa-devel] [PATCH 09/10] ASoC: omap-abe-twl6040: Add missing audio route information
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 01/10] ASoC: sdp4430: Correct author e-mail address
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv11 1/8] ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup.
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 06/10] ASoC: omap-abe-twl6040: Convert to platform deriver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 04/10] include: platform_data: Platform data header for OMAP4 ASoC audio
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 09/10] ASoC: omap-abe-twl6040: Add missing audio route information
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 08/10] OMAP4: omap4panda: Enable audio support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 07/10] ASoC: omap-abe-twl6040: Add support for PandaBoard
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 06/10] ASoC: omap-abe-twl6040: Convert to platform deriver
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 05/10] OMAP4: 4430sdp: Register platform device for OMAP4 audio
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 04/10] include: platform_data: Platform data header for OMAP4 ASoC audio
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 03/10] ASoC: omap-abe-twl6040: Correct internal prefix, Kconfig entry
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 02/10] ASoC: OMAP4: Rename the sdp4430 machine driver
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 01/10] ASoC: sdp4430: Correct author e-mail address
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 00/10] OMAP4: ASoC: Support for PandaBoard family
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v3] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH 6/6] HACK: arm: reprogram twd based on clk notifier
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP3LOGIC: Adding DSS support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] Revert "ARM: RX-51: Enable isp1704 power on/off"
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/7] HACK: omap: convert 44xx data to common struct clk
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v4 5/6] clk: basic gateable and fixed-rate clks
  • From: Ryan Mallon <rmallon@xxxxxxxxx>
• Re: [PATCH v2 07/10] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v4 3/6] clk: introduce the common clock framework
  • From: Ryan Mallon <rmallon@xxxxxxxxx>
• [PATCH 2/2] OMAPDSS: DISPC: Update Scaling Clock Logic
  • From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
• [PATCH 1/2] OMAPDSS: DISPC: Update Fir Coefficients
  • From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
• [PATCH 0/2] OMAPDSS: DISPC: Peformance improvement of DISPC Scaling
  • From: Chandrabhanu Mahapatra <cmahapatra@xxxxxx>
• Re: [PATCH 3/7] HACK: omap: convert 44xx data to common struct clk
  • From: "Turquette, Mike" <mturquette@xxxxxx>
• [PATCH 6/6] HACK: arm: reprogram twd based on clk notifier
  • From: Mike Turquette <mturquette@xxxxxx>
• [PATCH 5/6] smp_twd: Reconfigure clockevents after cpufreq change
  • From: Mike Turquette <mturquette@xxxxxx>
• [PATCH 1/6] HACK: omap: opp: add fake 400MHz OPP to bypass MPU
  • From: Mike Turquette <mturquette@xxxxxx>
• [PATCH 4/6] HACK: cpufreq: omap: change mpu_clk's rate
  • From: Mike Turquette <mturquette@xxxxxx>
• [PATCH 3/6] HACK: omap: clk: add mpu_periphclk clk node
  • From: Mike Turquette <mturquette@xxxxxx>
• [PATCH 2/6] omap: clk: .round_rate for propagating to parents
  • From: Mike Turquette <mturquette@xxxxxx>
• [PATCH 0/6] HACK: OMAP: testing common clk features
  • From: Mike Turquette <mturquette@xxxxxx>
• Re: [PATCH 3/7] HACK: omap: convert 44xx data to common struct clk
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 7/7] HACK: comment WARN_ON in _clkdm_clk_hwmod_disable
  • From: Mike Turquette <mturquette@xxxxxx>
• [PATCH 6/7] omap: dss: use clk_prepare in dss reset
  • From: Mike Turquette <mturquette@xxxxxx>
• [PATCH 5/7] omap: panda: use clk_prepare in ehci init
  • From: Mike Turquette <mturquette@xxxxxx>
• [PATCH 4/7] omap: hwmod: convert to use common struct clk
  • From: Mike Turquette <mturquette@xxxxxx>
• [PATCH 2/7] HACK: omap4: clk: convert to common struct clk
  • From: Mike Turquette <mturquette@xxxxxx>
• [PATCH 1/7] OMAP: Kconfig: select GENERIC_CLK
  • From: Mike Turquette <mturquette@xxxxxx>
• [PATCH 0/7] RFC: convert OMAP to common struct clk
  • From: Mike Turquette <mturquette@xxxxxx>
• Re: [PATCH v4 0/6] common clk framework
  • From: "Turquette, Mike" <mturquette@xxxxxx>
• [PATCH v4 2/6] Documentation: common clk API
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• [PATCH v4 4/6] clk: introduce rate change notifiers
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• [PATCH v4 6/6] clk: export the clk tree topology to debugfs
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• [PATCH v4 5/6] clk: basic gateable and fixed-rate clks
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• [PATCH v4 3/6] clk: introduce the common clock framework
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• [PATCH v4 1/6] clk: Kconfig: add entry for HAVE_CLK_PREPARE
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• [PATCH v4 0/6] common clk framework
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv11 1/8] ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup.
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: sys_clkout2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v3] arm: omap3evm: Add support for an MT9M032 based camera board.
  • From: Martin Hostettler <martin@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/10] i2c: OMAP: Add DT support for i2c controller
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v5 0/6] PM QoS: implement the OMAP low level constraints management code
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 4/6] OMAP3: cpuidle: next C-state decision depends on the PM QoS MPU and CORE constraints
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/6] OMAP2+: omap_hwmod: manage the wake-up latency constraints
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: sys_clkout2
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• Re: [PATCH 2/2] Revert "ARM: RX-51: Enable isp1704 power on/off"
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 2/2] Revert "ARM: RX-51: Enable isp1704 power on/off"
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] Two non-critical DMA fixes for v3.3 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL] omap hsmmc platform code changes for v3.3 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: sys_clkout2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: sys_clkout2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] omap: rx51: initialize isp1704 properly
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• sys_clkout2
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• Re: [PATCHv11 1/8] ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup.
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/2] Revert "ARM: RX-51: Enable isp1704 power on/off"
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCHv11 1/8] ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup.
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHv11 1/8] ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup.
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 0/4] fixes for twl4030-irq in mainline
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• [PATCH v9 24/31] gpio/omap: restore OE only after setting the output level
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 14/31] gpio/omap: remove bank->method & METHOD_* macros
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 18/31] gpio/omap: cleanup prepare_for_idle and resume_after_idle
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 23/31] gpio/omap: enable irq at the end of all configuration in restore
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 19/31] gpio/omap: fix debounce clock handling
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 20/31] gpio/omap: fix incorrect access of debounce module
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 17/31] gpio/omap: optimize suspend and resume functions
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 07/31] gpio/omap: further cleanup using wkup_en register
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 08/31] gpio/omap: use level/edge detect reg offsets
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 16/31] gpio/omap: use pm-runtime framework
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 11/31] gpio/omap: cleanup omap_gpio_mod_init function
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 05/31] gpio/omap: make non-wakeup GPIO part of pdata
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 15/31] gpio/omap: fix bankwidth for OMAP7xx MPUIO
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 10/31] gpio/omap: cleanup set_gpio_triggering function
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 13/31] gpio/omap: remove unnecessary bit-masking for read access
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 21/31] gpio/omap: remove omap_gpio_save_context overhead
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 06/31] gpio/omap: avoid cpu checks during module ena/disable
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 00/31] gpio/omap: driver cleanup and fixes
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 04/31] gpio/omap: handle save/restore context in GPIO driver
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 01/31] gpio/omap: remove dependency on gpio_bank_count
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 25/31] gpio/omap: handle set_dataout reg capable IP on restore
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 22/31] gpio/omap: save and restore debounce registers
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 09/31] gpio/omap: remove hardcoded offsets in context save/restore
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 12/31] gpio/omap: use pinctrl offset instead of macro
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 03/31] gpio/omap: make gpio_context part of gpio_bank structure
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v9 02/31] gpio/omap: use flag to identify wakeup domain
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• Re: [PATCH 0/4] fixes for twl4030-irq in mainline
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH] omap: rx51: initialize isp1704 properly
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH] omap: rx51: initialize isp1704 properly
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [GIT PULL] I2C: OMAP fixes for v3.2-rc
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv2 0/7]ARM: OMAP3PLUS PM: Add IO DaisyChain support via hwmod mux
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] ARM: OMAP3LOGIC: Adding DSS support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup
  • From: Kevin Hilman <khilman@xxxxxx>
• RE: [PATCHv2 0/7]ARM: OMAP3PLUS PM: Add IO DaisyChain support via hwmod mux
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 0/4] fixes for twl4030-irq in mainline
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH 2/3] OMAPDSS: HDMI: HPD support added to HDMI driver
  • From: <mythripk@xxxxxx>
• [PATCH 3/3] OMAPDSS: HDMI: Add option to enable HDMI in HPD mode
  • From: <mythripk@xxxxxx>
• [PATCH 1/3] OMAPDSS: HDMI: HPD support in boardfile
  • From: <mythripk@xxxxxx>
• [PATCH 0/3] OMAPDSS: HDMI: HDMI Hot-plug detect support.
  • From: <mythripk@xxxxxx>
• Re: Trying to boot Panda with DT
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 1/3] ARM: OMAP2+: kconfig: Enable devicetree by default for OMAP2+ systems
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: Trying to boot Panda with DT
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: Trying to boot Panda with DT
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: Trying to boot Panda with DT
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: Trying to boot Panda with DT
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: Interrupt issue in twl4030_keypad
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Trying to boot Panda with DT
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH 0/3] OMAPDSS: Miscellaneous Fixes
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 63/65] OMAPDSS: APPLY: add checking of ovls/mgrs settings
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCHv8 5/5] OMAP: I2C: Remove the SYSC register definition
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv8 4/5] OMAP: I2C: Remove the reset in the init path
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv8 1/5] OMAP3+: HWMOD: Add the default clockactivity for I2C
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv8 2/5] OMAP: hwmod/device : add omap_device_reset to reset all the hwmods in the device
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv8 0/5] I2C driver updates
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv8 3/5] OMAP: I2C: Reset support
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH v2 1/3] regulator: twl: adapt twl-regulator driver to dt
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 3/3] omap4: panda: Pass regulator data from dt
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 2/3] ARM: omap4-sdp: Pass regulator data from dt
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 0/3] Device tree support for TWL regulators
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 63/65] OMAPDSS: APPLY: add checking of ovls/mgrs settings
  • From: Archit Taneja <a0393947@xxxxxx>
• Re: [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 2/2] OMAPDSS: HDMI: Disable DDC internal pull up
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v2] ARM: OMAP3LOGIC: Adding DSS support
  • From: Alex <alexg@xxxxxxxxxxxxxx>
• Re: [PATCHv7 5/7] mfd: twl-core: pass driver data from pdata to add_regulator for VDD1 and VDD2
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [RFC PATCH v1 6/7] media: video: introduce face detection driver module
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 2/2] OMAPDSS: HDMI: Disable DDC internal pull up
  • From: <mythripk@xxxxxx>
• [PATCH 1/2] OMAPDSS: HDMI: Move duplicate code from boardfile
  • From: <mythripk@xxxxxx>
• RE: [RFC PATCH v1 6/7] media: video: introduce face detection driver module
  • From: "HeungJun, Kim" <riverful.kim@xxxxxxxxxxx>
• Re: [RFC PATCH v1 6/7] media: video: introduce face detection driver module
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [RFC PATCH v1 1/7] omap4: introduce fdif(face detect module) hwmod
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP: dmtimer: fix sleeping function called from invalid context
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCHv11 0/8] OMAP3+: PRCM chain handler
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv11 3/8] ARM: OMAP: prm: add support for chain interrupt handler
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv11 8/8] ARM: OMAP: mux: add support for selecting mpu_irq for each wakeup pad
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv11 5/8] ARM: OMAP2+: mux: add support for PAD wakeup interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: McSPI: Remove unused flag from struct omap2_mcspi_device_config
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP: dmtimer: fix sleeping function called from invalid context
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] Two non-critical DMA fixes for v3.3 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] omap hsmmc platform code changes for v3.3 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH v1 6/7] media: video: introduce face detection driver module
  • From: Sylwester Nawrocki <snjw23@xxxxxxxxx>
• Re: [PATCH 0/4] fixes for twl4030-irq in mainline
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH v3 4/5] clk: basic gateable and fixed-rate clks
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: Interrupt issue in twl4030_keypad
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Interrupt issue in twl4030_keypad
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH v3 4/5] clk: basic gateable and fixed-rate clks
  • From: "Turquette, Mike" <mturquette@xxxxxx>
• Re: Interrupt issue in twl4030_keypad
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: Interrupt issue in twl4030_keypad
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH] ARM: remove header files included more than once
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH v3 4/5] clk: basic gateable and fixed-rate clks
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] omap: rx51: initialize isp1704 properly
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Interrupt issue in twl4030_keypad
  • From: Greg KH <gregkh@xxxxxxx>
• Re: Interrupt issue in twl4030_keypad
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 5/8] usb: musb: Add support for ti81xx platform
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 6/8] am335xevm: Add support for musb interface
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/8] usb: musb: Add support for ti81xx platform
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/8] ti816evm: Add support for musb interface
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/8] omap: musb: ti81xx: Add phy power function
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/8] omap: musb: Adding support for ti81xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: mcbsp: Fix possible memory corruption
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Interrupt issue in twl4030_keypad
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH RESEND v5 0/3] Add support for TI814X processor series
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv11 8/8] ARM: OMAP: mux: add support for selecting mpu_irq for each wakeup pad
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv11 6/8] ARM: OMAP3: pm: use prcm chain handler
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv11 7/8] ARM: OMAP3: pm: do not enable PRCM MPU interrupts manually
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv11 5/8] ARM: OMAP2+: mux: add support for PAD wakeup interrupts
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv11 3/8] ARM: OMAP: prm: add support for chain interrupt handler
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv11 4/8] ARM: OMAP: prcm: add suspend prepare / finish support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv11 2/8] ARM: OMAP2+: hwmod: Add API to check IO PAD wakeup status
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv11 1/8] ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup.
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv11 0/8] OMAP3+: PRCM chain handler
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv7 5/7] mfd: twl-core: pass driver data from pdata to add_regulator for VDD1 and VDD2
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/7] mfd: twl4030-irq: set irq nested flag
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 3/7] mfd: twl4030-irq: drop the kthread
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 0/4] fixes for twl4030-irq in mainline
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] OMAP: PM: switch from omap_pm_ functions to PM QoS
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [linux-pm] [PATCH 4/6] OMAP3: cpuidle: next C-state decision depends on the PM QoS MPU and CORE constraints
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 6/6] OMAP3: powerdomain data: add wake-up latency figures
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 5/6] OMAP3: update cpuidle latency and threshold figures
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 4/6] OMAP3: cpuidle: next C-state decision depends on the PM QoS MPU and CORE constraints
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 3/6] OMAP: PM: register to the per-device PM QoS framework
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 2/6] OMAP2+: omap_hwmod: manage the wake-up latency constraints
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH 1/6] OMAP2+: powerdomain: control power domains next state
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH v5 0/6] PM QoS: implement the OMAP low level constraints management code
  • From: jean.pihet@xxxxxxxxxxxxxx
• [PATCH] ARM: OMAP3LOGIC: Adding DSS support
  • From: Alex <alexg@xxxxxxxxxxxxxx>
• Re: [PATCHv10 05/14] OMAP2+: mux: add support for PAD wakeup interrupts
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv4 12/15] vc: omap3: auto_ret / auto_off support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv8 2/5] omap3: voltage: fix channel configuration
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH] ARM: OMAP2+: Fix: Don't wait for the idle status if modulemode is not supported
  • From: Benoit Cousson <b-cousson@xxxxxx>
• RE: [PATCH] ARM: OMAP3LOGIC: Adding DSS support
  • From: Alex Gershgorin <alexg@xxxxxxxxxxxxxx>
• RE: [RFC PATCH v1 6/7] media: video: introduce face detection driver module
  • From: "HeungJun, Kim" <riverful.kim@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: mcbsp: Fix possible memory corruption
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND v2 0/2] PMIC TPS65910 fixes
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH 08/10] omapfb: lcd_ams_delta: Drive control lines over GPIO
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] ARM: OMAP: mcbsp: Fix possible memory corruption
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3LOGIC: Adding DSS support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 2/3] video: omap: convert drivers/video/omap/* to use module_platform_driver()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 1/2] video: omap: Staticise non-exported symbols
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: Should I worry about "omap-mcbsp.2: alias fck already exists" or is it expected?
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] ARM: OMAP: mcbsp: Fix possible memory corruption
  • From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
• Re: [PATCHv10 05/14] OMAP2+: mux: add support for PAD wakeup interrupts
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv10 04/14] omap: prm: add support for suspend prepare and finish callbacks
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv10 00/14] PRCM chain handler
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv10 06/14] omap3: pm: use prcm chain handler
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv4 12/15] vc: omap3: auto_ret / auto_off support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [RFC PATCH v1 6/7] media: video: introduce face detection driver module
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCHv4 11/15] omap3+: voltage/pwrdm/clkdm/clock add recursive usecount tracking
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv4 10/15] omap: beagle: set oscillator startup time to 10ms for rev c4
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv4 05/15] omap: add support for oscillator setup
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv4 01/15] OMAP3+: PM: VP: use uV for max and min voltage limits
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv4 00/15] voltdm cleanup + auto-ret / auto-off support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv8 2/5] omap3: voltage: fix channel configuration
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH] ARM: OMAP: McSPI: Remove unused flag from struct omap2_mcspi_device_config
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• [PATCH] ARM: OMAP: mcbsp: Fix possible memory corruption
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: [PATCH 09/10] input: serio: ams-delta: Toggle keyboard power over GPIO
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: Commit 09d28d2c19 introduces set-after-free in arch/arm/mach-omap2/mcbsp.c
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: [PATCH 7/8] OMAP4: clock: Add CPU local timer clock node.
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 2/2] Revert "ARM: RX-51: Enable isp1704 power on/off"
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• [PATCH 3/3] OMAPDSS: Displays: Make PICODLP driver depend on DPI
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 2/3] OMAPDSS: Panel NEC: Set omap_dss_device states correctly
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 1/3] OMAPDSS: DSI: Fix HSDIV related PLL info in dsi_dump_clocks()
  • From: Archit Taneja <archit@xxxxxx>
• [PATCH 0/3] OMAPDSS: Miscellaneous Fixes
  • From: Archit Taneja <archit@xxxxxx>
• Re: [PATCH 00/10] ARM: OMAP1: ams-delta: replace custom I/O with GPIO
  • From: Jonathan McDowell <noodles@xxxxxxxx>
• Re: [PATCH 07/10] ASoC: OMAP: ams-delta: Drive modem/codec pins over GPIO API
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] PM support for omap4 for v3.3 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [GIT PULL] omap1 changes for v3.3 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH] ARM: remove header files included more than once
  • From: Haojian Zhuang <haojian.zhuang@xxxxxxxxx>
• Should I worry about "omap-mcbsp.2: alias fck already exists" or is it expected?
  • From: NeilBrown <neilb@xxxxxxx>
• Re: Adding remoteproc/rpmsg to linux-next
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• [PATCH 10/10] ARM: OMAP1: ams-delta: Drop custom I/O functions
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 08/10] omapfb: lcd_ams_delta: Drive control lines over GPIO
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 09/10] input: serio: ams-delta: Toggle keyboard power over GPIO
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 07/10] ASoC: OMAP: ams-delta: Drive modem/codec pins over GPIO API
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 06/10] ARM: OMAP1: ams-delta: Use GPIO API in modem setup
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 05/10] MTD: NAND: ams-delta: Use GPIO instead of custom I/O
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 04/10] LED: Drop leds-ams-delta driver
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 03/10] ARM: OMAP1: ams-delta: Supersede custom led device by leds-gpio
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 00/10] ARM: OMAP1: ams-delta: replace custom I/O with GPIO
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 02/10] ARM: OMAP1: ams-delta: Convert latches to basic_mmio_gpio
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 01/10] GPIO: gpio-generic: Move initialization up to postcore
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [RFC PATCH v1 6/7] media: video: introduce face detection driver module
  • From: Sylwester Nawrocki <snjw23@xxxxxxxxx>
• Re: [RFC PATCH v1 6/7] media: video: introduce face detection driver module
  • From: Sylwester Nawrocki <snjw23@xxxxxxxxx>
• Re: [RFC PATCH v1 5/7] media: v4l2: introduce two IOCTLs for face detection
  • From: Sylwester Nawrocki <snjw23@xxxxxxxxx>
• Re: [PATCH v2 09/11] arm: omap4430sdp: Add support for omap4iss camera
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Commit 09d28d2c19 introduces set-after-free in arch/arm/mach-omap2/mcbsp.c
  • From: NeilBrown <neilb@xxxxxxx>
• Re: [PATCH 1/5] ASoC: omap-dmic: Add device tree bindings
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 REPOST 17/24] gpio/omap: fix debounce clock handling
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• No console output (omap-3.2 branch)
  • From: Andre Puschmann <andre.puschmann@xxxxxxxxxxxxx>
• Re: MMC not working reliably for Gumstix Overo Tide
  • From: Andre Puschmann <andre.puschmann@xxxxxxxxxxxxx>
• Re: [PATCH 5/5 v2] ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH v2] staging: tidspbridge: request dmtimer clocks on init
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH] OMAP2+: hwmod: remove unused voltagedomain pointer from kerneldoc
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH] OMAP2+: hwmod: remove unused voltagedomain pointer from kerneldoc
  • From: jean.pihet@xxxxxxxxxxxxxx
• Re: [PATCH v2] omap: rx51: fix USB
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH RESEND v5 1/3] ARM: OMAP: TI81XX: Prepare for addition of TI814X support
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH RESEND v5 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH RESEND v5 2/3] ARM: OMAP: TI814X: Add cpu type macros and detection support
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH RESEND v5 0/3] Add support for TI814X processor series
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH RESEND v5 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH RESEND v5 2/3] ARM: OMAP: TI814X: Add cpu type macros and detection support
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH RESEND v5 1/3] ARM: OMAP: TI81XX: Prepare for addition of TI814X support
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH RESEND v5 0/3] Add support for TI814X processor series
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• Re: [PATCH v2 01/10] ARM: OMAP2+: pm: Do not init statically the SR and voltage layer with DT
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: MMC not working reliably for Gumstix Overo Tide
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH] AM35xx: disable checking for reserved feature bits
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv7 3/7] omap3: voltage: fix channel configuration
  • From: Kevin Hilman <khilman@xxxxxx>
• MMC not working reliably for Gumstix Overo Tide
  • From: Andre Puschmann <andre.puschmann@xxxxxxxxxxxxx>
• Re: [PATCH 5/5 v2] ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCHv8 2/5] omap3: voltage: fix channel configuration
  • From: Kevin Hilman <khilman@xxxxxx>
• RE: [PATCH] ARM: OMAP3LOGIC: Adding DSS support
  • From: Alex Gershgorin <alexg@xxxxxxxxxxxxxx>
• Re: [PATCHv10 06/14] omap3: pm: use prcm chain handler
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv10 05/14] OMAP2+: mux: add support for PAD wakeup interrupts
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv10 04/14] omap: prm: add support for suspend prepare and finish callbacks
  • From: Kevin Hilman <khilman@xxxxxx>
• It looks like snd-soc-rx51 only works as built-in, not as a module
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 2/3] video: omap: convert drivers/video/omap/* to use module_platform_driver()
  • From: Jonathan McDowell <noodles@xxxxxxxx>
• Re: [PATCH 1/2] video: omap: Staticise non-exported symbols
  • From: Jonathan McDowell <noodles@xxxxxxxx>
• Re: [PATCH v2] staging: tidspbridge: request dmtimer clocks on init
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCHv10 00/14] PRCM chain handler
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP2+: hwmod: remove unused voltagedomain pointer from kerneldoc
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/2] ARM: OMAP: dmtimer: fix sleeping function called from invalid context
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [GIT PULL] omap1 changes for v3.3 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP: dmtimer: fix sleeping function called from invalid context
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] omap1 changes for v3.3 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] PM support for omap4 for v3.3 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3LOGIC: Adding DSS support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 3/5] OMAP4: devices: Register OMAP4 DMIC platform device
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] OMAP: minor PM cleanups for v3.3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 1/3] ARM: OMAP: TI81XX: Prepare for addition of TI814X support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] arm: mach-omap2: sdram-nokia: add 200 MHz memory timings info
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv4 00/15] voltdm cleanup + auto-ret / auto-off support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv4 12/15] vc: omap3: auto_ret / auto_off support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/3] arm: mach-omap2: sdram-nokia: add 200 MHz memory timings info
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: [PATCHv4 11/15] omap3+: voltage/pwrdm/clkdm/clock add recursive usecount tracking
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv4 10/15] omap: beagle: set oscillator startup time to 10ms for rev c4
  • From: Kevin Hilman <khilman@xxxxxx>
• RE: [PATCH v4 1/3] ARM: OMAP: TI81XX: Prepare for addition of TI814X support
  • From: "Pedanekar, Hemant" <hemantp@xxxxxx>
• Re: [PATCHv4 05/15] omap: add support for oscillator setup
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH] OMAP2+: hwmod: remove unused voltagedomain pointer from kerneldoc
  • From: jean.pihet@xxxxxxxxxxxxxx
• Re: [PATCH 1/3] arm: tools: mach-types: add nokia_rm696
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv4 01/15] OMAP3+: PM: VP: use uV for max and min voltage limits
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/3] arm: mach-omap2: sdram-nokia: add 200 MHz memory timings info
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] i2c_omap: correct OMAP_I2C_SYSC_REG offset
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] i2c_omap: correct OMAP_I2C_SYSC_REG offset
  • From: Kevin Hilman <khilman@xxxxxx>
• [GIT PULL] OMAP: minor PM cleanups for v3.3
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH] ARM: remove header files included more than once
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• Re: [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCHv8 4/5] twl4030: add support for external voltage get/set
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 5/5] omap3: twl: add external controllers for core voltage regulators
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 3/5] omap3: add common twl configurations for vdd1 and vdd2
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 2/5] omap3: voltage: fix channel configuration
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 1/5] TEMP: OMAP3: beagle rev-c4: enable OPP6
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 0/5] SMPS regulator driver
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [RFC PATCH v1 6/7] media: video: introduce face detection driver module
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 2/3] arm: mach-omap2: sdram-nokia: add 200 MHz memory timings info
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• [PATCH 3/3] arm: omap: add minimal support for Nokia RM-696
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• [PATCH 0/3] arm: omap: add support for Nokia RM-696 (Nokia N9)
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• [PATCH 1/3] arm: tools: mach-types: add nokia_rm696
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Adding remoteproc/rpmsg to linux-next
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• Re: [PATCH 2/4] ARM: OMAP2/3: intc: Add DT support for TI interrupt controller
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCHv10 14/14] TEMP: OMAP device: change pr_warnings to pr_debugs
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv10 13/14] TEMP: OMAP: serial: remove padconf hacks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv10 12/14] TEMP: OMAP3: serial: made serial to work properly with PRCM chain handler
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv10 06/14] omap3: pm: use prcm chain handler
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv10 11/14] TEMP: OMAP3: pm: remove serial resume / idle calls from idle path
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv10 10/14] TEMP: mux: added trace for io wkup event
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv10 09/14] TEMP: 4430sdp: use common serial init with mux support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv10 07/14] OMAP3: pm: do not enable PRCM MPU interrupts manually
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv10 08/14] TEMP: serial: added mux support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv10 05/14] OMAP2+: mux: add support for PAD wakeup interrupts
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv10 04/14] omap: prm: add support for suspend prepare and finish callbacks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv10 02/14] OMAP2+: hwmod: Add API to check IO PAD wakeup status
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv10 03/14] omap: prm: add support for chain interrupt handler
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv10 01/14] OMAP2+: hwmod: Add API to enable IO ring wakeup.
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv10 00/14] PRCM chain handler
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] omap: beagle: Don't register madc twice
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: [PATCH 0/7] Introducing a generic AMP framework
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH] omap: beagle: Don't register madc twice
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• [PATCH v2 04/10] rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 10/10] ARM: OMAP2+: board-generic: Remove i2c static init
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 09/10] arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 08/10] arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 07/10] arm/dts: omap4-panda: Add twl6030 and i2c EEPROM
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 05/10] arm/dts: OMAP4: Add i2c controller nodes
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 06/10] arm/dts: OMAP3: Add i2c controller nodes
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH v2 03/10] mfd: twl-core: Add initial DT support for twl4030/twl6030
  • From: Benoit Cousson <b-cousson@xxxxxx>