From: Jean Pihet <j-pihet@xxxxxx>
. Implement the devices wake-up latency constraints using the global
device PM QoS notification handler which applies the constraints to the
underlying layer
. Implement the low level code which controls the power domains next power
states, through the hwmod and pwrdm layers
. Add cpuidle and power domains wake-up latency figures for OMAP3, cf.
comments in the code and [1] for the details on where the numbers
are magically coming from
. Implement the relation between the cpuidle and per-device PM QoS frameworks
in the OMAP3 specific idle callbacks.
The chosen C-state shall satisfy the following conditions:
. the 'valid' field is enabled,
. it satisfies the enable_off_mode flag,
. the next state for MPU and CORE power domains is not lower than the
state programmed by the per-device PM QoS.
ToDo:
1. validate the constraints framework on OMAP4 HW (done on OMAP3)
2. Re-visit the OMAP power domains states initialization procedure. Currently
the power states that have been changed from the constraints API which were
applied before the initialization of the power domains are lost
3. Further clean-up the OMAP PM layer, use the generic frameworks instead (OPP,
PM QoS...)
Based on the pm-qos branch of the linux-omap git tree (3.2.0-rc4), cf. [2].
Tested on OMAP3 Beagleboard (ES2.x) with constraints on MPU, CORE, PER in
RETention and OFF modes.
[1] http://www.omappedia.org/wiki/Power_Management_Device_Latencies_Measurement
[2] git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
v5:
. rebased on latest linux-omap [2]
. rework after Kevin's comments on the MLs
v4:
. split up the patches which remove the omap_pm_ code from the patch set.
Those patches are to be submitted later, on top of this patch set.
. latency numbers: provide the measurements setup and conditions in the code
comments, added the link to the details on wiki [1].
. improved kerneldoc
. split big functions into smaller ones, in order to improve the readability
v3: reworked the error return path and improved the kerneldoc
v2: reworked the OMAP specific cpuidle code to demote the initial C-state to
a valid C-state which fulfills the per-device constraints
v1: initial version
Jean Pihet (6):
OMAP2+: powerdomain: control power domains next state
OMAP2+: omap_hwmod: manage the wake-up latency constraints
OMAP: PM: register to the per-device PM QoS framework
OMAP3: cpuidle: next C-state decision depends on the PM QoS MPU and
CORE constraints
OMAP3: update cpuidle latency and threshold figures
OMAP3: powerdomain data: add wake-up latency figures
arch/arm/mach-omap2/cpuidle34xx.c | 107 +++++++-----
arch/arm/mach-omap2/omap_hwmod.c | 27 +++-
arch/arm/mach-omap2/pm.c | 71 ++++++++-
arch/arm/mach-omap2/pm.h | 17 ++-
arch/arm/mach-omap2/powerdomain.c | 245 ++++++++++++++++++++++++++
arch/arm/mach-omap2/powerdomain.h | 36 ++++-
arch/arm/mach-omap2/powerdomains3xxx_data.c | 83 +++++++++
arch/arm/plat-omap/include/plat/omap_hwmod.h | 2 +
8 files changed, 539 insertions(+), 49 deletions(-)
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
