Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs)
is bothersome to maintain and likely to lead to merge conflicts.
This patch moves the knowledge of which platforms have a L2x0 or
PL310 cache controller to the individual machines. To enable this,
a new MIGHT_HAVE_CACHE_L2X0 config option is introduced to allow
machines to indicate that they may have such a cache controller
independently of each other.
Boards/SoCs which cannot reliably operate without the L2 cache
controller support will need to select CACHE_L2X0 directly from
their own Kconfigs instead. This applies to some TrustZone-enabled
boards where Linux runs in the Normal World, for example.
Signed-off-by: Dave Martin <dave.martin@xxxxxxxxxx>
Acked-by: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
(for cns3xxx)
Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>
(for omap)
---
Changes:
v5: Minor change to the Kconfig help text to make it more
informative.
arch/arm/Kconfig | 8 ++++++++
arch/arm/mach-exynos/Kconfig | 1 +
arch/arm/mach-omap2/Kconfig | 1 +
arch/arm/mach-realview/Kconfig | 5 +++++
arch/arm/mach-vexpress/Kconfig | 1 +
arch/arm/mm/Kconfig | 23 ++++++++++++++++-------
arch/arm/plat-mxc/Kconfig | 1 +
7 files changed, 33 insertions(+), 7 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 44789ef..16a4b9e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -344,6 +344,7 @@ config ARCH_HIGHBANK
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
+ select MIGHT_HAVE_CACHE_L2X0
select USE_OF
help
Support for the Calxeda Highbank SoC based boards.
@@ -361,6 +362,7 @@ config ARCH_CNS3XXX
select CPU_V6K
select GENERIC_CLOCKEVENTS
select ARM_GIC
+ select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
help
@@ -381,6 +383,7 @@ config ARCH_PRIMA2
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
+ select MIGHT_HAVE_CACHE_L2X0
select USE_OF
select ZONE_DMA
help
@@ -633,6 +636,7 @@ config ARCH_TEGRA
select GENERIC_GPIO
select HAVE_CLK
select HAVE_SCHED_CLOCK
+ select MIGHT_HAVE_CACHE_L2X0
select ARCH_HAS_CPUFREQ
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
@@ -703,6 +707,7 @@ config ARCH_SHMOBILE
select CLKDEV_LOOKUP
select HAVE_MACH_CLKDEV
select GENERIC_CLOCKEVENTS
+ select MIGHT_HAVE_CACHE_L2X0
select NO_IOPORT
select SPARSE_IRQ
select MULTI_IRQ_HANDLER
@@ -904,6 +909,7 @@ config ARCH_U8500
select CLKDEV_LOOKUP
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_CPUFREQ
+ select MIGHT_HAVE_CACHE_L2X0
help
Support for ST-Ericsson's Ux500 architecture
@@ -914,6 +920,7 @@ config ARCH_NOMADIK
select CPU_ARM926T
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
+ select MIGHT_HAVE_CACHE_L2X0
select ARCH_REQUIRE_GPIOLIB
help
Support for the Nomadik platform by ST-Ericsson
@@ -973,6 +980,7 @@ config ARCH_ZYNQ
select ARM_GIC
select ARM_AMBA
select ICST
+ select MIGHT_HAVE_CACHE_L2X0
select USE_OF
help
Support for Xilinx Zynq ARM Cortex A9 Platform
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 724ec0f..7f2347b 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -17,6 +17,7 @@ choice
config ARCH_EXYNOS4
bool "SAMSUNG EXYNOS4"
+ select MIGHT_HAVE_CACHE_L2X0
help
Samsung EXYNOS4 SoCs based systems
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 5034147..c841578 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -44,6 +44,7 @@ config ARCH_OMAP4
select CPU_V7
select ARM_GIC
select LOCAL_TIMERS if SMP
+ select MIGHT_HAVE_CACHE_L2X0
select PL310_ERRATA_588369
select PL310_ERRATA_727915
select ARM_ERRATA_720789
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index dba6d0c..3dd620f 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -12,6 +12,7 @@ config REALVIEW_EB_A9MP
bool "Support Multicore Cortex-A9 Tile"
depends on MACH_REALVIEW_EB
select CPU_V7
+ select MIGHT_HAVE_CACHE_L2X0
help
Enable support for the Cortex-A9MPCore tile fitted to the
Realview(R) Emulation Baseboard platform.
@@ -21,6 +22,7 @@ config REALVIEW_EB_ARM11MP
depends on MACH_REALVIEW_EB
select CPU_V6K
select ARCH_HAS_BARRIERS if SMP
+ select MIGHT_HAVE_CACHE_L2X0
help
Enable support for the ARM11MPCore tile fitted to the Realview(R)
Emulation Baseboard platform.
@@ -39,6 +41,7 @@ config MACH_REALVIEW_PB11MP
select CPU_V6K
select ARM_GIC
select HAVE_PATA_PLATFORM
+ select MIGHT_HAVE_CACHE_L2X0
select ARCH_HAS_BARRIERS if SMP
help
Include support for the ARM(R) RealView(R) Platform Baseboard for
@@ -51,6 +54,7 @@ config MACH_REALVIEW_PB1176
select CPU_V6
select ARM_GIC
select HAVE_TCM
+ select MIGHT_HAVE_CACHE_L2X0
help
Include support for the ARM(R) RealView(R) Platform Baseboard for
ARM1176JZF-S.
@@ -78,6 +82,7 @@ config MACH_REALVIEW_PBX
bool "Support RealView(R) Platform Baseboard Explore"
select ARM_GIC
select HAVE_PATA_PLATFORM
+ select MIGHT_HAVE_CACHE_L2X0
select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
select ZONE_DMA if SPARSEMEM
help
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 9311484..a8aefc8 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -8,5 +8,6 @@ config ARCH_VEXPRESS_CA9X4
select ARM_ERRATA_720789
select ARM_ERRATA_751472
select ARM_ERRATA_753970
+ select MIGHT_HAVE_CACHE_L2X0
endmenu
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 67f75a0..acb1c36 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -816,14 +816,23 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
Say Y here to use the Feroceon L2 cache in writethrough mode.
Unless you specifically require this, say N for writeback mode.
+config MIGHT_HAVE_CACHE_L2X0
+ bool
+ help
+ This option should be selected by machines which have a L2x0
+ or PL310 cache controller, but where its use is optional.
+
+ The only effect of this option is to make CACHE_L2X0 and
+ related options available to the user for configuration.
+
+ Boards or SoCs which always require the cache controller
+ support to be present should select CACHE_L2X0 directly
+ instead of this option, thus preventing the user from
+ inadvertently configuring a broken kernel.
+
config CACHE_L2X0
- bool "Enable the L2x0 outer cache controller"
- depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
- REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
- ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
- ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
- ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
- default y
+ bool "Enable the L2x0 outer cache controller" if MIGHT_HAVE_CACHE_L2X0
+ default MIGHT_HAVE_CACHE_L2X0
select OUTER_CACHE
select OUTER_CACHE_SYNC
help
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index b3a1f2b..b30708e 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -20,6 +20,7 @@ config ARCH_IMX_V6_V7
bool "i.MX3, i.MX6"
select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
+ select MIGHT_HAVE_CACHE_L2X0
help
This enables support for systems based on the Freescale i.MX3 and i.MX6
family.
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
