Since IO Daisychain modifies only PRM registers, it makes sense to move it to
PRM File.
Signed-off-by: Vishwanath BS <vishwanath.bs@xxxxxx>
Tested-by: Govindraj.R <govindraj.raja@xxxxxx>
---
arch/arm/mach-omap2/pm34xx.c | 30 +-----------------------------
arch/arm/mach-omap2/prm2xxx_3xxx.c | 33 +++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/prm2xxx_3xxx.h | 14 ++++++++++++++
3 files changed, 48 insertions(+), 29 deletions(-)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 074688b..448e620 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -96,34 +96,6 @@ static inline void omap3_per_restore_context(void)
omap_gpio_restore_context();
}
-static void omap3_enable_io_chain(void)
-{
- int timeout = 0;
-
- omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKEN);
- /* Do a readback to assure write has been done */
- omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
-
- while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
- OMAP3430_ST_IO_CHAIN_MASK)) {
- timeout++;
- if (timeout > 1000) {
- pr_err("Wake up daisy chain activation failed.\n");
- return;
- }
- }
- omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKEN);
-
-}
-
-static void omap3_disable_io_chain(void)
-{
- omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKEN);
-}
-
static void omap3_core_save_context(void)
{
omap3_ctrl_save_padconf();
@@ -335,7 +307,7 @@ void omap_sram_idle(void)
core_next_state < PWRDM_POWER_ON)) {
omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
if (omap3_has_io_chain_ctrl())
- omap3_enable_io_chain();
+ omap3_trigger_wuclk_ctrl();
}
/* Block console output in case it is on one of the OMAP UARTs */
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 2a4a678..6db5935 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -227,6 +227,39 @@ u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
}
+/**
+ * Maximum time(us) it takes to output the signal WUCLKOUT of the last pad of
+ * the I/O ring after asserting WUCLKIN high
+ */
+#define MAX_IOPAD_LATCH_TIME 1000
+
+/* OMAP3 Daisychain trigger sequence */
+void omap3_trigger_wuclk_ctrl(void)
+{
+ int i = 0;
+
+ omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKEN);
+ /* Do a readback to assure write has been done */
+ omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+
+ omap_test_timeout(
+ (((omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+ OMAP3430_ST_IO_CHAIN_MASK) == 1)),
+ MAX_IOPAD_LATCH_TIME, i);
+
+ omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKEN);
+}
+
+/* OMAP3 Daisychain disable sequence */
+void omap3_disable_io_chain(void)
+{
+ if (omap_rev() >= OMAP3430_REV_ES3_1)
+ omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKEN);
+}
+
static int __init omap3xxx_prcm_init(void)
{
if (cpu_is_omap34xx())
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index cef533d..e6f8206 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -289,6 +289,18 @@ static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
"not suppose to be used on omap4\n");
return 0;
}
+static inline void omap3_trigger_wuclk_ctrl(void)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+ "not suppose to be used on omap4\n");
+ return 0;
+}
+static inline void omap3_disable_io_chain(void)
+{
+ WARN(1, "prm: omap2xxx/omap3xxx specific function and "
+ "not suppose to be used on omap4\n");
+ return 0;
+}
#else
/* Power/reset management domain register get/set */
extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx);
@@ -302,6 +314,8 @@ extern u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift);
+extern void omap3_trigger_wuclk_ctrl(void);
+extern void omap3_disable_io_chain(void);
/* OMAP3-specific VP functions */
u32 omap3_prm_vp_check_txdone(u8 vp_id);
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
