Benoit,
On 12/09/2011 08:02 AM, Benoit Cousson wrote:
> Add initial DT support to retrieve the frequency using a
> DT attribute instead of the pdata pointer if of_node exist.
>
> Add documentation for omap i2c controller binding.
>
> Based on original patches from Manju and Grant.
>
> Signed-off-by: Benoit Cousson <b-cousson@xxxxxx>
> Cc: Ben Dooks <ben-linux@xxxxxxxxx>
> ---
> Documentation/devicetree/bindings/i2c/omap-i2c.txt | 42 ++++++++
> drivers/i2c/busses/i2c-omap.c | 100 +++++++++++++-------
> 2 files changed, 107 insertions(+), 35 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/i2c/omap-i2c.txt
>
> diff --git a/Documentation/devicetree/bindings/i2c/omap-i2c.txt b/Documentation/devicetree/bindings/i2c/omap-i2c.txt
> new file mode 100644
> index 0000000..d259a17
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/omap-i2c.txt
> @@ -0,0 +1,42 @@
> +I2C for OMAP platforms
> +
> +Required properties :
> +- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
> +- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
> +- #address-cells = <1>;
> +- #size-cells = <0>;
> +
> +Recommended properties :
> +- clock-frequency : Desired I2C bus clock frequency in Hz. Otherwise
> + the default 100 kHz frequency will be used.
> +
> +Optional properties:
> +- Child nodes conforming to i2c bus binding
> +- ti,flags : u32: settings or errata relative to the i2c
> + 0x1: OMAP_I2C_FLAG_NO_FIFO
> + 0x2: OMAP_I2C_FLAG_SIMPLE_CLOCK
> + 0x4: OMAP_I2C_FLAG_16BIT_DATA_REG
> + 0x8: OMAP_I2C_FLAG_RESET_REGS_POSTIDLE
> + 0x10: OMAP_I2C_FLAG_APPLY_ERRATA_I207
> + 0x20: OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK
> + 0x40: OMAP_I2C_FLAG_FORCE_19200_INT_CLK
> + Valid for ti,omap3-i2c only:
> + 0x80: OMAP_I2C_FLAG_BUS_SHIFT_1: 8 bits registers
> + 0x100: OMAP_I2C_FLAG_BUS_SHIFT_2: 16 bits registers
It's generally preferred to split these out to separate properties since
there is not yet define capability in dts. Can some of these be removed
by having more specific compatible strings? That is the whole point in
having compatible strings not be generic. omap4-i2c and omap3-i2c is
still kind of generic.
> +Note: Current implementation will fetch base address, irq and dma
> +from omap hwmod data base during device registration.
> +Future plan is to migrate hwmod data base contents into device tree
> +blob so that, all the required data will be used from device tree dts
> +file.
> +
> +Examples :
> +
> +i2c1: i2c@0 {
> + compatible = "ti,omap3-i2c";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ti,hwmods = "i2c1";
> + clock-frequency = <400000>;
> + ti,flags = <0x118>;
> +};
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index a43d002..b4a8eee 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -37,6 +37,8 @@
> #include <linux/platform_device.h>
> #include <linux/clk.h>
> #include <linux/io.h>
> +#include <linux/of_i2c.h>
> +#include <linux/of_device.h>
> #include <linux/slab.h>
> #include <linux/i2c-omap.h>
> #include <linux/pm_runtime.h>
> @@ -182,7 +184,9 @@ struct omap_i2c_dev {
> u32 latency; /* maximum mpu wkup latency */
> void (*set_mpu_wkup_lat)(struct device *dev,
> long latency);
> - u32 speed; /* Speed of bus in Khz */
> + u32 speed; /* Speed of bus in kHz */
> + u32 dtrev; /* extra revision from DT */
> + u32 flags;
> u16 cmd_err;
> u8 *buf;
> u8 *regs;
> @@ -266,11 +270,7 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
>
> static void omap_i2c_unidle(struct omap_i2c_dev *dev)
> {
> - struct omap_i2c_bus_platform_data *pdata;
> -
> - pdata = dev->dev->platform_data;
> -
> - if (pdata->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
> + if (dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
> omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
> omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
> omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
> @@ -291,13 +291,10 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev)
>
> static void omap_i2c_idle(struct omap_i2c_dev *dev)
> {
> - struct omap_i2c_bus_platform_data *pdata;
> u16 iv;
>
> - pdata = dev->dev->platform_data;
> -
> dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
> - if (pdata->rev == OMAP_I2C_IP_VERSION_2)
> + if (dev->dtrev == OMAP_I2C_IP_VERSION_2)
> omap_i2c_write_reg(dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
> else
> omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
> @@ -320,9 +317,6 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
> unsigned long timeout;
> unsigned long internal_clk = 0;
> struct clk *fclk;
> - struct omap_i2c_bus_platform_data *pdata;
> -
> - pdata = dev->dev->platform_data;
>
> if (dev->rev >= OMAP_I2C_OMAP1_REV_2) {
> /* Disable I2C controller before soft reset */
> @@ -373,7 +367,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
> }
> omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
>
> - if (pdata->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
> + if (dev->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
> /*
> * The I2C functional clock is the armxor_ck, so there's
> * no need to get "armxor_ck" separately. Now, if OMAP2420
> @@ -397,7 +391,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
> psc = fclk_rate / 12000000;
> }
>
> - if (!(pdata->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) {
> + if (!(dev->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) {
>
> /*
> * HSI2C controller internal clk rate should be 19.2 Mhz for
> @@ -406,7 +400,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
> * The filter is iclk (fclk for HS) period.
> */
> if (dev->speed > 400 ||
> - pdata->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK)
> + dev->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK)
> internal_clk = 19200;
> else if (dev->speed > 100)
> internal_clk = 9600;
> @@ -475,7 +469,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
>
> dev->errata = 0;
>
> - if (pdata->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
> + if (dev->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
> dev->errata |= I2C_OMAP_ERRATA_I207;
>
> /* Enable interrupts */
> @@ -484,7 +478,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
> OMAP_I2C_IE_AL) | ((dev->fifo_size) ?
> (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0);
> omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
> - if (pdata->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
> + if (dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
> dev->pscstate = psc;
> dev->scllstate = scll;
> dev->sclhstate = sclh;
> @@ -804,9 +798,6 @@ omap_i2c_isr(int this_irq, void *dev_id)
> u16 bits;
> u16 stat, w;
> int err, count = 0;
> - struct omap_i2c_bus_platform_data *pdata;
> -
> - pdata = dev->dev->platform_data;
>
> if (pm_runtime_suspended(dev->dev))
> return IRQ_NONE;
> @@ -875,7 +866,7 @@ complete:
> * Data reg in 2430, omap3 and
> * omap4 is 8 bit wide
> */
> - if (pdata->flags &
> + if (dev->flags &
> OMAP_I2C_FLAG_16BIT_DATA_REG) {
> if (dev->buf_len) {
> *dev->buf++ = w >> 8;
> @@ -918,7 +909,7 @@ complete:
> * Data reg in 2430, omap3 and
> * omap4 is 8 bit wide
> */
> - if (pdata->flags &
> + if (dev->flags &
> OMAP_I2C_FLAG_16BIT_DATA_REG) {
> if (dev->buf_len) {
> w |= *dev->buf++ << 8;
> @@ -965,6 +956,31 @@ static const struct i2c_algorithm omap_i2c_algo = {
> .functionality = omap_i2c_func,
> };
>
> +#ifdef CONFIG_OF
> +static struct omap_i2c_bus_platform_data omap3_pdata = {
> + .rev = OMAP_I2C_IP_VERSION_1,
> +};
> +
> +static struct omap_i2c_bus_platform_data omap4_pdata = {
> + .rev = OMAP_I2C_IP_VERSION_2,
> +};
This is redundant. The ip version can be determined from the compatible
string.
> +
> +static const struct of_device_id omap_i2c_of_match[] = {
> + {
> + .compatible = "ti,omap4-i2c",
> + .data = &omap4_pdata,
> + },
> + {
> + .compatible = "ti,omap3-i2c",
> + .data = &omap3_pdata,
> + },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, omap_i2c_of_match);
> +#else
> +#define omap_i2c_of_match NULL
Use of_match_ptr instead of the #else.
> +#endif
> +
> static int __devinit
> omap_i2c_probe(struct platform_device *pdev)
> {
> @@ -972,9 +988,10 @@ omap_i2c_probe(struct platform_device *pdev)
> struct i2c_adapter *adap;
> struct resource *mem, *irq, *ioarea;
> struct omap_i2c_bus_platform_data *pdata = pdev->dev.platform_data;
> + struct device_node *node = pdev->dev.of_node;
> + const struct of_device_id *match;
> irq_handler_t isr;
> int r;
> - u32 speed = 0;
>
> /* NOTE: driver uses the static register mapping */
> mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> @@ -1001,15 +1018,24 @@ omap_i2c_probe(struct platform_device *pdev)
> goto err_release_region;
> }
>
> - if (pdata != NULL) {
> - speed = pdata->clkrate;
> + match = of_match_device(omap_i2c_of_match, &pdev->dev);
> + if (match) {
> + u32 freq = 100000; /* default to 100000 Hz */
> + pdata = match->data;
> +
> + of_property_read_u32(node, "clock-frequency", &freq);
> + /* convert DT freq value in Hz into kHz for speed */
> + dev->speed = freq / 1000;
> + of_property_read_u32(node, "ti,flags", &dev->flags);
> + dev->dtrev = pdata->rev;
> +
> + } else if (pdata != NULL) {
> + dev->speed = pdata->clkrate;
> + dev->flags = pdata->flags;
> dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
> - } else {
> - speed = 100; /* Default speed */
> - dev->set_mpu_wkup_lat = NULL;
> + dev->dtrev = pdata->rev;
> }
>
> - dev->speed = speed;
> dev->dev = &pdev->dev;
> dev->irq = irq->start;
> dev->base = ioremap(mem->start, resource_size(mem));
> @@ -1020,9 +1046,9 @@ omap_i2c_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, dev);
>
> - dev->reg_shift = (pdata->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
> + dev->reg_shift = (dev->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
>
> - if (pdata->rev == OMAP_I2C_IP_VERSION_2)
> + if (dev->dtrev == OMAP_I2C_IP_VERSION_2)
> dev->regs = (u8 *)reg_map_ip_v2;
> else
> dev->regs = (u8 *)reg_map_ip_v1;
> @@ -1035,7 +1061,7 @@ omap_i2c_probe(struct platform_device *pdev)
> if (dev->rev <= OMAP_I2C_REV_ON_3430)
> dev->errata |= I2C_OMAP3_1P153;
>
> - if (!(pdata->flags & OMAP_I2C_FLAG_NO_FIFO)) {
> + if (!(dev->flags & OMAP_I2C_FLAG_NO_FIFO)) {
> u16 s;
>
> /* Set up the fifo size - Get total size */
> @@ -1057,7 +1083,7 @@ omap_i2c_probe(struct platform_device *pdev)
> /* calculate wakeup latency constraint for MPU */
> if (dev->set_mpu_wkup_lat != NULL)
> dev->latency = (1000000 * dev->fifo_size) /
> - (1000 * speed / 8);
> + (1000 * dev->speed / 8);
> }
>
> /* reset ASAP, clearing any IRQs */
> @@ -1073,7 +1099,7 @@ omap_i2c_probe(struct platform_device *pdev)
> }
>
> dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id,
> - pdata->rev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
> + dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
>
> pm_runtime_put(dev->dev);
>
> @@ -1084,6 +1110,7 @@ omap_i2c_probe(struct platform_device *pdev)
> strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
> adap->algo = &omap_i2c_algo;
> adap->dev.parent = &pdev->dev;
> + adap->dev.of_node = pdev->dev.of_node;
>
> /* i2c device drivers may be active on return from add_adapter() */
> adap->nr = pdev->id;
> @@ -1093,6 +1120,8 @@ omap_i2c_probe(struct platform_device *pdev)
> goto err_free_irq;
> }
>
> + of_i2c_register_devices(adap);
> +
> return 0;
>
> err_free_irq:
> @@ -1165,6 +1194,7 @@ static struct platform_driver omap_i2c_driver = {
> .name = "omap_i2c",
> .owner = THIS_MODULE,
> .pm = OMAP_I2C_PM_OPS,
> + .of_match_table = omap_i2c_of_match,
> },
> };
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
