Re: [PATCH 3/3] of/irq: Add interrupts-names property to name an irq resource

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Dec 05, 2011 at 03:23:56PM +0100, Benoit Cousson wrote:
> In a HW system, resources in general have name to identify them.
> The is the case as well for IORESOURCE_IRQ resources filled by DT
> "interrupts" entries.
> The current DT mechanism is relying on the "interrupts" order to identify
> the proper resource. This is error prone and not the natural way to
> retrieve an information in general.

I do not agree with this assessment.  interrupt property order has
worked quite well for a very long time.  There are some uses cases
that want to access it by-name, but I expect accessing by-index to
continue to be the preferred method.  I'm going to drop this paragraph
from the commit text.

> Moreover, the resource does support a name and an API is available to
> allow a driver to retrieve the resource using the name instead of an
> index.
> 
> Add a interrupts-names property to allow the possiblity to provide a name
> to any interrupts entries.
> If the name is available, use it to name the resource, otherwise
> keep the legacy device full name.
> 
> Signed-off-by: Benoit Cousson <b-cousson@xxxxxx>
> Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
> Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/interrupts-names.txt       |   50 ++++++++++++++++++++
>  drivers/of/irq.c                                   |   11 ++++-
>  2 files changed, 60 insertions(+), 1 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/interrupts-names.txt
> 
> diff --git a/Documentation/devicetree/bindings/interrupts-names.txt b/Documentation/devicetree/bindings/interrupts-names.txt
> new file mode 100644
> index 0000000..d9a796d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupts-names.txt
> @@ -0,0 +1,50 @@
> +interrupts-names property
> +
> +In a HW system, physical resources in general have name to identify them.
> +The is the case as well for interrupt lines.
> +The current DT mechanism is relying on the "interrupts" order to identify
> +the proper resource. The interrupts-names is adding the possiblity to
> +provide a name to interrupts entries.
> +
> +Usage:
> +
> +This attribute must be used along with a regular interrupts entry. If not
> +it will be simply ignored.

This documentation is pretty much identical to the reg-names property
description.  I'll merge the two into a single file.

> +
> +
> +Example:
> +
> +
> +l4-abe {
> +	compatible = "simple-bus";
> +	#address-cells = <2>;
> +	#size-cells = <1>;
> +	ranges = <0 0 0x48000000 0x00001000>, /* MPU path */
> +		 <1 0 0x49000000 0x00001000>; /* L3 path */
> +	mcasp {
> +		compatible = "ti,mcasp";
> +		reg = <0 0x10 0x10>, <0 0x20 0x10>,
> +		      <1 0x10 0x10>, <1 0x20 0x10>;
> +		reg-names = "mpu", "dat",
> +			    "dma", "dma_dat";
> +		interrupts = <11>, <12>;
> +		interrupts-names = "rx", "tx";

Nitpick: I'm going to change the property name to "interrupt-names"
(dropping the 's' from interrupts).  After playing with the clock
binding (clocks vs. clock-names) and looking at what could be done
with the gpio binding (gpios vs. gpio-names), I think it 'feels' more
consistent to drop the s.

Merged, thanks.

> +	};
> +
> +	timer {
> +		compatible = "ti,timer";
> +		reg = <0 0x40 0x10>, <1 0x40 0x10>;
> +		reg-names = "mpu", "dma";
> +	};
> +};
> +
> +
> +usb {
> +	compatible = "ti,usb-host";
> +	reg = <0x4a064000 0x800>, <0x4a064800 0x200>,
> +	      <0x4a064c00 0x200>;
> +	reg-names = "config", "ohci", "ehci";
> +	interrupts = <14>, <15>;
> +	interrupts-names = "ohci", "ehci";
> +};
> +
> diff --git a/drivers/of/irq.c b/drivers/of/irq.c
> index 19c0115..604b53f 100644
> --- a/drivers/of/irq.c
> +++ b/drivers/of/irq.c
> @@ -346,9 +346,18 @@ int of_irq_to_resource(struct device_node *dev, int index, struct resource *r)
>  	/* Only dereference the resource if both the
>  	 * resource and the irq are valid. */
>  	if (r && irq != NO_IRQ) {
> +		const char *name = NULL;
> +
> +		/*
> +		 * Get optional "interrupts-names" property to add a name
> +		 * to the resource.
> +		 */
> +		of_property_read_string_index(dev, "interrupts-names", index,
> +					      &name);
> +
>  		r->start = r->end = irq;
>  		r->flags = IORESOURCE_IRQ;
> -		r->name = dev->full_name;
> +		r->name = name ? name : dev->full_name;
>  	}
>  
>  	return irq;
> -- 
> 1.7.0.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux