On Sat, 14 Jan 2012, NeilBrown wrote: > On Fri, 13 Jan 2012 04:31:37 -0700 (MST) Paul Walmsley <paul@xxxxxxxxx> wrote: > > > I'm not seeing garbling at all on the OMAP3 BeagleBoard here, running v3.2 > > with omap2plus_defconfig. The first character from the console gets lost, > > which again is expected when the CORE enters a low-power state and there's > > no flow control on the serial interface -- but no garbling. > > What baud rate? 115200 bps, no flow control. > Presumably with working hardware handshaking we should be able to avoid any > loss or corruption?? Yes. If you're using off-mode, you'll need to ensure that the I/O ring is set to wake the system when it sees the appropriate signal level on the incoming flow control line. > (I'm not sure if I said - but the board I am working on is the GTA04 Openmoko > board: www.gta04.org). Did not know that. Exciting! Maybe you can send some to the OMAP maintainers ;-) - Paul -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
