Linux IIO (Industrial I/O) Development
[Prev Page][Next Page]
- Re: [PATCH v2 0/9] Serial slave device bus, (continued)
- [PATCH] iio: accel: fix Kconfig warning,
Linus Walleij
- [PATCH v9 0/8] Add PWM and IIO timer drivers for STM32,
Benjamin Gaignard
- [PATCH v9 1/8] MFD: add bindings for STM32 Timers driver, Benjamin Gaignard
- [PATCH v9 6/8] IIO: add STM32 timer trigger driver, Benjamin Gaignard
- [PATCH v9 4/8] pwm: add driver for STM32 plaftorm, Benjamin Gaignard
- [PATCH v9 2/8] MFD: add STM32 Timers driver, Benjamin Gaignard
- [PATCH v9 8/8] ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco, Benjamin Gaignard
- [PATCH v9 7/8] ARM: dts: stm32: add Timers driver for stm32f429 MCU, Benjamin Gaignard
- [PATCH v9 3/8] dt-bindings: pwm: Add STM32 bindings, Benjamin Gaignard
- [PATCH v9 5/8] IIO: add bindings for STM32 timer trigger driver, Benjamin Gaignard
- [GIT PULL] Immutable branch between MFD, ARM, IIO and PWM due for the v4.10 merge window, Lee Jones
- [PATCH 0/2] iio: health: add MAX30102 oximeter driver support,
Matt Ranostay
- [PATCH v2] iio: trigger: free trigger resource correctly,
Alison Schofield
- [PATCH v3] iio: light: acpi-als: Properly enable on ASUS Zenbooks,
Josef Gajdusek
- [PATCH 0/5] Add GPIO set_multiple callback support for ISA_BUS_API drivers,
William Breathitt Gray
- [PATCH 0/7] Add support for triggered buffer mode to STM32 ADC,
Fabrice Gasnier
- [PATCH 3/7] iio: adc: stm32: add trigger polarity extended attribute, Fabrice Gasnier
- [PATCH 4/7] Documentation: dt: iio: stm32-adc: optional dma support, Fabrice Gasnier
- [PATCH 7/7] ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-eval, Fabrice Gasnier
- [PATCH 5/7] iio: adc: stm32: add optional dma support, Fabrice Gasnier
- [PATCH 6/7] ARM: dts: stm32: Enable dma by default on stm32f4 adc, Fabrice Gasnier
[PATCH v2] iio: light: acpi-als: Properly enable on ASUS Zenbooks,
Josef Gajdusek
[PATCH] iio: dht11: Use usleep_range instead of msleep for start signal,
John Brooks
[PATCH] iio: light: acpi-als: Properly enable on ASUS Zenbooks,
Josef Gajdusek
[PATCH v5 0/2] iio: adc: Add Maxim MAX11100 driver,
Jacopo Mondi
[PATCH v8 00/12] mux controller abstraction and iio/i2c muxes,
Peter Rosin
- [PATCH v8 11/12] dt-bindings: simplified bindings for single-user gpio mux, Peter Rosin
- [PATCH v8 12/12] mux: support simplified bindings for single-user gpio mux, Peter Rosin
- [PATCH v8 08/12] i2c: i2c-mux-simple: new driver, Peter Rosin
- [PATCH v8 10/12] mux: adg792a: add mux controller driver for ADG792A/G, Peter Rosin
- [PATCH v8 09/12] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux, Peter Rosin
- [PATCH v8 05/12] dt-bindings: iio: io-channel-mux: document io-channel-mux bindings, Peter Rosin
- [PATCH v8 01/12] devres: trivial whitespace fix, Peter Rosin
- [PATCH v8 03/12] mux: minimal mux subsystem and gpio-based mux controller, Peter Rosin
- [PATCH v8 06/12] iio: multiplexer: new iio category and iio-mux driver, Peter Rosin
- [PATCH v8 04/12] iio: inkern: api for manipulating ext_info of iio channels, Peter Rosin
- [PATCH v8 02/12] dt-bindings: document devicetree bindings for mux-controllers and mux-gpio, Peter Rosin
- [PATCH v8 07/12] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings, Peter Rosin
libgpiod v0.1: C library and command-line tools for controlling GPIOs,
Bartosz Golaszewski
[PATCH v8 0/8] Add PWM and IIO timer drivers for STM32,
Benjamin Gaignard
[PATCH] iio: trigger: free trigger resource correctly,
Alison Schofield
[PATCH] iio: imu: st_lsm6dsx: fix typo in gyro sensitivity definition,
Lorenzo Bianconi
[PATCH 1/3 v3] iio: adc: add device tree bindings for Qualcomm PM8xxx ADCs,
Linus Walleij
[PATCH v3 3/3] iio: distance: srf08: add driver ABI documentation,
Andreas Klinger
[PATCH v3 2/3] iio: distance: srf08: add IIO driver for us ranger,
Andreas Klinger
[PATCH v3 0/3] iio: distance: srf08: add IIO driver for us ranger, Andreas Klinger
[PATCH v3 1/3] iio: distance: srf08: add trivial DT binding, Andreas Klinger
[PATCH v2 00/15] staging cleanups,
Brian Masney
- [PATCH v2 11/15] staging: iio: isl29028: remove unnecessary parenthesis, Brian Masney
- [PATCH v2 04/15] staging: iio: isl29028: change newlines to improve readability, Brian Masney
- [PATCH v2 03/15] staging: iio: isl29028: combine isl29028_proxim_get() and isl29028_read_proxim(), Brian Masney
- [PATCH v2 05/15] staging: iio: isl29028: remove unused define ISL29028_DEV_ATTR, Brian Masney
- [PATCH v2 06/15] staging: iio: isl29028: move failure logging into isl29028_set_proxim_sampling(), Brian Masney
- [PATCH v2 07/15] staging: iio: isl29028: move failure logging into isl29028_set_als_scale(), Brian Masney
- [PATCH v2 08/15] staging: iio: isl29028: made error messages consistent, Brian Masney
- [PATCH v2 09/15] staging: iio: isl29028: remove unnecessary error logging in isl29028_chip_init_and_power_on(), Brian Masney
- [PATCH v2 10/15] staging: iio: isl29028: remove out of memory log message, Brian Masney
- [PATCH v2 02/15] staging: iio: isl29028: fix alignment of function arguments, Brian Masney
- [PATCH v2 01/15] staging: iio: isl29028: made alignment of variables in struct isl29028_chip consistent, Brian Masney
- [PATCH v2 15/15] staging: iio: isl29028: add runtime power management support, Brian Masney
- [PATCH v2 12/15] staging: iio: isl29028: remove enable flag from isl29028_enable_proximity(), Brian Masney
- [PATCH v2 13/15] staging: iio: isl29028: only set proximity sampling rate when proximity is enabled, Brian Masney
- [PATCH v2 14/15] staging: iio: isl29028: only set ALS scale when ALS/IR sensing is enabled, Brian Masney
[PATCH] iio: health: max30100: fixed parenthesis around FIFO count check,
Matt Ranostay
[PATCH] iio: adc: palmas_gpadc: retrieve a valid iio_dev in suspend/resume,
Alison Schofield
[PATCH 1/3] iio: light: opt3001: Export OF device ID table as module aliases,
Javier Martinez Canillas
[PATCH] iio: health: max30100: use msleep() for long uncritical delays,
Nicholas Mc Guire
[PATCH v3 1/1] iio: adc: tlc4541: add support for TI tlc4541 adc,
Phil Reid
[PATCH] iio: bmi160: use variable names for sizeof() operator,
Alison Schofield
[PATCH V6] iio: adc: Add Renesas GyroADC driver,
Marek Vasut
[PATCH] iio: health: afe4404: retrieve a valid iio_dev in suspend/resume,
Alison Schofield
[PATCH] iio: health: afe4403: retrieve a valid iio_dev in suspend/resume,
Alison Schofield
[PATCH V5] iio: adc: Add Renesas GyroADC driver,
Marek Vasut
[PATCH v3] iio: max5481: Add support for Maxim digital potentiometers,
Slawomir Stepien
RE: [PATCH 3/4] iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs,
Heiner Kallweit
RE: [PATCH 4/4] ARM64: dts: meson: meson-gx: add the SAR ADC,
Heiner Kallweit
Using IIO for high-speed DAQ,
Matthias Klumpp
[PATCH v4 0/2] iio: adc: Add Maxim MAX11100 driver,
Jacopo Mondi
[PATCH v3] iio: adc: Add Maxim MAX11100 driver,
Jacopo Mondi
[PATCH 0/3] ti,ads7950 device tree bindings,
David Lechner
[PATCH] iio: magnetometer: ak8974: remove redundant zero timeout check,
Colin King
[PULL] First set of IIO new device support and cleanups for the 4.11 cycle.,
Jonathan Cameron
[PATCH 0/4] Amlogic Meson SAR ADC support,
Martin Blumenstingl
[PATCHv2 1/2] iio: Documentation: Add proximity unit,
Enric Balletbo i Serra
[PATCH] iio: inkern: pass through raw values if no scaling,
Linus Walleij
[PATCH v1 1/1] iio: adc: tlc4541: add support for TI tlc4541 adc,
Phil Reid
[PATCH 0/7] mfd/iio: move the AB8500 GPADC driver to IIO,
Linus Walleij
[PATCH v4 0/2] add support to STM LSM6DS3-LSM6DSM 6-axis Mems sensor,
Lorenzo Bianconi
[PATCH V4] iio: adc: Add Renesas GyroADC driver,
Marek Vasut
[PATCH 0/3] pc104: Mask PC/104 Kconfig options,
William Breathitt Gray
[PATCH v2 0/2] iio: distance: srf08: add IIO driver for us ranger, Andreas Klinger
[PATCH v2 2/2] iio: distance: srf08: add IIO driver for us ranger,
Andreas Klinger
[PATCH v2 1/2] iio: distance: srf08: add trivial DT binding,
Andreas Klinger
[PATCH 2/2] iio: distance: srf08: add IIO driver for us ranger,
Andreas Klinger
[PATCH 1/2] iio: distance: srf08: add trivial DT binding, Andreas Klinger
[PATCH 0/2] iio: distance: srf08: add IIO driver for us ranger, Andreas Klinger
[PATCH v4] iio:temperature: Add support for TI TMP007 sensor,
Manivannan Sadhasivam
[PATCH V2] iio: adc: Add Renesas GyroADC driver,
Marek Vasut
[PATCH] iio:adc:qcom-spmi-vadc: use div64_s64 instead of direct 64 bit division.,
Jonathan Cameron
[PATCH] guessing,
Jonathan Cameron
[PATCH v2] iio: max5481: Add support for Maxim digital potentiometers,
Slawomir Stepien
Re: [iio:testing 56/57] drivers/iio/adc/qcom-spmi-vadc.c:667:3: note: in expansion of macro 'do_div', Jonathan Cameron
[PATCH v4] staging: iio: ad7606: replace range/range_available with corresponding scale,
Eva Rachel Retuya
[PATCH] iio:trigger: Fix coding style in iio-trig-bfin-timer.c by removing a waring flagged by checkpatch.pl,
rishabh hardas
[PATCH] Fixed a coding style issue as a part of Eudyptula Challenge,
rishabh hardas
[PATCH v3] iio:temperature: Add support for TI TMP007 sensor,
Mani Sadhasivam
[PATCH v5 2/2] iio: adc: hx711: Add IIO driver for AVIA HX711,
Andreas Klinger
[PATCH v5 1/2] iio: adc: hx711: Add DT binding for avia,hx711,
Andreas Klinger
[PATCH v5 0/2] iio: adc: hx711: Add IIO driver for AVIA HX711 ADC, Andreas Klinger
[PATCH v2] iio:temperature: Add support for TI TMP007 sensor, Mani Sadhasivam
[PATCH] iio: accel: st_accel: handle deprecated bindings,
Linus Walleij
[PATCH 1/1] iio: adc: tlc4541: add support for TI tlc4541 adc,
Phil Reid
[PATCH v7 0/8] Add PWM and IIO timer drivers for STM32,
Benjamin Gaignard
[PATCH] iio:temperature: Add support for TI TMP007 sensor,
Mani Sadhasivam
[PATCH v2 1/2] iio: Add support for linear accel,
Song Hongyan
[PATCH v3 1/2] iio: Add channel for Gravity,
Song Hongyan
[PATCH v5 1/5] devicetree: mfd: Add binding for the TI LM3533,
Bjorn Andersson
[PATCH v7 00/12] mux controller abstraction and iio/i2c muxes,
Peter Rosin
- [PATCH v7 03/12] mux: minimal mux subsystem and gpio-based mux controller, Peter Rosin
- [PATCH v7 04/12] dt-bindings: simplified bindings for single-user gpio mux, Peter Rosin
- [PATCH v7 02/12] dt-bindings: document devicetree bindings for mux-controllers and mux-gpio, Peter Rosin
- [PATCH v7 08/12] iio: multiplexer: new iio category and iio-mux driver, Peter Rosin
- [PATCH v7 12/12] mux: adg792a: add mux controller driver for ADG792A/G, Peter Rosin
- [PATCH v7 11/12] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux, Peter Rosin
- [PATCH v7 05/12] mux: support simplified bindings for single-user gpio mux, Peter Rosin
- [PATCH v7 10/12] i2c: i2c-mux-simple: new driver, Peter Rosin
- [PATCH v7 09/12] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings, Peter Rosin
- [PATCH v7 01/12] devres: trivial whitespace fix, Peter Rosin
- [PATCH v7 07/12] dt-bindings: iio: iio-mux: document iio-mux bindings, Peter Rosin
- [PATCH v7 06/12] iio: inkern: api for manipulating ext_info of iio channels, Peter Rosin
- Re: [PATCH v7 00/12] mux controller abstraction and iio/i2c muxes, Wolfram Sang
[PATCH] staging:iio:addac Fixes Alignment should match open parenthesis,
Scott Matheina
[PATCH 1/2] iio: Add support for linear accel,
Song Hongyan
[PATCH v2 1/2] iio: Add channel for Gravity,
Song Hongyan
[PATCH 00/22] add support for AXP20X and AXP22X power supply drivers,
Quentin Schulz
- [PATCH 02/22] mfd: axp20x: add ADC data regs to volatile regs for AXP22X, Quentin Schulz
- [PATCH 15/22] mfd: axp20x: add CHRG_CTRL1 to writeable regs for AXP20X/AXP22X, Quentin Schulz
- [PATCH 16/22] mfd: axp20x: add V_OFF to writeable regs for AXP20X and AXP22X, Quentin Schulz
- [PATCH 17/22] power: supply: add battery driver for AXP20X and AXP22X PMICs, Quentin Schulz
- [PATCH 19/22] ARM: dtsi: axp209: add battery power supply subnode, Quentin Schulz
- [PATCH 18/22] mfd: axp20x: add MFD cells for AXP20X and AXP22X battery driver, Quentin Schulz
- [PATCH 20/22] ARM: dtsi: axp22x: add battery power supply subnode, Quentin Schulz
- [PATCH 21/22] ARM: dts: sun8i: sina33: enable battery power supply subnode, Quentin Schulz
- [PATCH 22/22] ARM: sun5i: chip: enable battery power supply subnode, Quentin Schulz
- [PATCH 14/22] dt-bindings: power: supply: add AXP20X/AXP22X battery DT binding, Quentin Schulz
- [PATCH 13/22] ARM: sun5i: chip: enable ACIN power supply subnode, Quentin Schulz
- [PATCH 12/22] ARM: dts: sun8i: sina33: enable ACIN power supply subnode, Quentin Schulz
- [PATCH 11/22] ARM: dtsi: axp22x: add AC power supply subnode, Quentin Schulz
- [PATCH 09/22] mfd: axp20x: add AC power supply cells for AXP22X PMICs, Quentin Schulz
- [PATCH 10/22] ARM: dtsi: axp209: add AC power supply subnode, Quentin Schulz
- [PATCH 08/22] power: supply: add AC power supply driver for AXP20X and AXP22X PMICs, Quentin Schulz
- [PATCH 01/22] dt-bindings: iio: adc: add AXP20X/AXP22X ADC DT binding, Quentin Schulz
- [PATCH 07/22] dt-bindings: power: supply: add AXP20X/AXP22X AC power supply, Quentin Schulz
- [PATCH 05/22] ARM: dtsi: axp209: add AXP209 ADC subnode, Quentin Schulz
- [PATCH 06/22] ARM: dtsi: axp22x: add AXP22X ADC subnode, Quentin Schulz
- [PATCH 03/22] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs, Quentin Schulz
- [PATCH 04/22] mfd: axp20x: add ADC cells for AXP20X and AXP22X PMICs, Quentin Schulz
[PATCH 00/11] buffer.h cleanup and split,
Jonathan Cameron
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]