Re: [PATCH 4/5] iio: imu: inv_mpu6050: better fifo overflow handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/14/2018 02:05 PM, Jean-Baptiste Maneyrol wrote:
Use fifo overflow bit from int status rather than using an
arbitrary threshold.

Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
---
  drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h  | 2 +-
  drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 5 +++--
  2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index 8d9044c..09a7e1c 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -166,6 +166,7 @@ struct inv_mpu6050_state {
  #define INV_MPU6050_REG_RAW_GYRO            0x43
#define INV_MPU6050_REG_INT_STATUS 0x3A
+#define INV_MPU6050_BIT_FIFO_OVERFLOW_INT   0x10
  #define INV_MPU6050_BIT_RAW_DATA_RDY_INT    0x01
#define INV_MPU6050_REG_USER_CTRL 0x6A
@@ -190,7 +191,6 @@ struct inv_mpu6050_state {
#define INV_MPU6050_BYTES_PER_3AXIS_SENSOR 6
  #define INV_MPU6050_FIFO_COUNT_BYTE          2
-#define INV_MPU6050_FIFO_THRESHOLD           500
/* mpu6500 registers */
  #define INV_MPU6500_REG_ACCEL_CONFIG_2      0x1D
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
index 7724888..7a4aaed 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -110,6 +110,9 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
  			"failed to ack interrupt\n");
  		goto flush_fifo;
  	}
+	/* handle fifo overflow by reseting fifo */
+	if (int_status & INV_MPU6050_BIT_FIFO_OVERFLOW_INT)
+		goto flush_fifo;
  	if (!(int_status & INV_MPU6050_BIT_RAW_DATA_RDY_INT)) {
  		dev_warn(regmap_get_device(st->map),
  			"spurious interrupt with status 0x%x\n", int_status);
@@ -135,8 +138,6 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
  	if (result)
  		goto end_session;
  	fifo_count = get_unaligned_be16(&data[0]);
-	if (fifo_count >  INV_MPU6050_FIFO_THRESHOLD)
-		goto flush_fifo;
  	/* compute and process all complete datum */
  	nb = fifo_count / bytes_per_datum;
  	for (i = 0; i < nb; ++i) {


Reviewed-by: Martin Kelly <mkelly@xxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux