Add support for external reference voltage through the regulator framework.
Signed-off-by: Silvan Murer <silvan.murer@xxxxxxxxx>
---
Changes in v2:
- Add 'optional properties' documentation
- Return an error when a regulator is specified
- Use internal reference when no regulator is specified
- Use iio_device_register instead of devm_iio_device_register
.../devicetree/bindings/iio/dac/ltc2632.txt | 14 +++++
drivers/iio/dac/ltc2632.c | 70 +++++++++++++++++++---
2 files changed, 75 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
index eb911e5..e0d5fea 100644
--- a/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
+++ b/Documentation/devicetree/bindings/iio/dac/ltc2632.txt
@@ -12,12 +12,26 @@ Required properties:
Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
apply. In particular, "reg" and "spi-max-frequency" properties must be given.
+Optional properties:
+ - vref-supply: Phandle to the external reference voltage supply. This should
+ only be set if there is an external reference voltage connected to the VREF
+ pin. If the property is not set the internal reference is used.
+
Example:
+ vref: regulator-vref {
+ compatible = "regulator-fixed";
+ regulator-name = "vref-ltc2632";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ };
+
spi_master {
dac: ltc2632@0 {
compatible = "lltc,ltc2632-l12";
reg = <0>; /* CS0 */
spi-max-frequency = <1000000>;
+ vref-supply = <&vref>; /* optional */
};
};
diff --git a/drivers/iio/dac/ltc2632.c b/drivers/iio/dac/ltc2632.c
index d322b78..7127cf6 100644
--- a/drivers/iio/dac/ltc2632.c
+++ b/drivers/iio/dac/ltc2632.c
@@ -2,6 +2,7 @@
* LTC2632 Digital to analog convertors spi driver
*
* Copyright 2017 Maxime Roussin-Bélanger
+ * expanded by Silvan Murer <silvan.murer@xxxxxxxxx>
*
* Licensed under the GPL-2.
*/
@@ -10,6 +11,7 @@
#include <linux/spi/spi.h>
#include <linux/module.h>
#include <linux/iio/iio.h>
+#include <linux/regulator/consumer.h>
#define LTC2632_DAC_CHANNELS 2
@@ -28,7 +30,7 @@
/**
* struct ltc2632_chip_info - chip specific information
* @channels: channel spec for the DAC
- * @vref_mv: reference voltage
+ * @vref_mv: internal reference voltage
*/
struct ltc2632_chip_info {
const struct iio_chan_spec *channels;
@@ -39,10 +41,14 @@ struct ltc2632_chip_info {
* struct ltc2632_state - driver instance specific data
* @spi_dev: pointer to the spi_device struct
* @powerdown_cache_mask used to show current channel powerdown state
+ * @vref_mv used reference voltage (internal or external)
+ * @vref_reg regulator for the reference voltage
*/
struct ltc2632_state {
struct spi_device *spi_dev;
unsigned int powerdown_cache_mask;
+ int vref_mv;
+ struct regulator *vref_reg;
};
enum ltc2632_supported_device_ids {
@@ -90,7 +96,7 @@ static int ltc2632_read_raw(struct iio_dev *indio_dev,
switch (m) {
case IIO_CHAN_INFO_SCALE:
- *val = chip_info->vref_mv;
+ *val = st->vref_mv;
*val2 = chan->scan_type.realbits;
return IIO_VAL_FRACTIONAL_LOG2;
}
@@ -247,6 +253,45 @@ static int ltc2632_probe(struct spi_device *spi)
chip_info = (struct ltc2632_chip_info *)
spi_get_device_id(spi)->driver_data;
+ st->vref_reg = devm_regulator_get_optional(&spi->dev, "vref");
+ if (PTR_ERR(st->vref_reg) == -ENODEV) {
+ /* use internal reference voltage */
+ st->vref_reg = NULL;
+ st->vref_mv = chip_info->vref_mv;
+
+ ret = ltc2632_spi_write(spi, LTC2632_CMD_INTERNAL_REFER,
+ 0, 0, 0);
+ if (ret) {
+ dev_err(&spi->dev,
+ "Set internal reference command failed, %d\n",
+ ret);
+ return ret;
+ }
+ } else if (IS_ERR(st->vref_reg)) {
+ dev_err(&spi->dev,
+ "Error getting voltage reference regulator\n");
+ return PTR_ERR(st->vref_reg);
+ } else {
+ /* use external reference voltage */
+ ret = regulator_enable(st->vref_reg);
+ if (ret) {
+ dev_err(&spi->dev,
+ "enable reference regulator failed, %d\n",
+ ret);
+ return ret;
+ }
+ st->vref_mv = regulator_get_voltage(st->vref_reg) / 1000;
+
+ ret = ltc2632_spi_write(spi, LTC2632_CMD_EXTERNAL_REFER,
+ 0, 0, 0);
+ if (ret) {
+ dev_err(&spi->dev,
+ "Set external reference command failed, %d\n",
+ ret);
+ return ret;
+ }
+ }
+
indio_dev->dev.parent = &spi->dev;
indio_dev->name = dev_of_node(&spi->dev) ? dev_of_node(&spi->dev)->name
: spi_get_device_id(spi)->name;
@@ -255,14 +300,20 @@ static int ltc2632_probe(struct spi_device *spi)
indio_dev->channels = chip_info->channels;
indio_dev->num_channels = LTC2632_DAC_CHANNELS;
- ret = ltc2632_spi_write(spi, LTC2632_CMD_INTERNAL_REFER, 0, 0, 0);
- if (ret) {
- dev_err(&spi->dev,
- "Set internal reference command failed, %d\n", ret);
- return ret;
- }
+ return iio_device_register(indio_dev);
+}
+
+static int ltc2632_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct ltc2632_state *st = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+
+ if (st->vref_reg)
+ regulator_disable(st->vref_reg);
- return devm_iio_device_register(&spi->dev, indio_dev);
+ return 0;
}
static const struct spi_device_id ltc2632_id[] = {
@@ -306,6 +357,7 @@ static struct spi_driver ltc2632_driver = {
.of_match_table = of_match_ptr(ltc2632_of_match),
},
.probe = ltc2632_probe,
+ .remove = ltc2632_remove,
.id_table = ltc2632_id,
};
module_spi_driver(ltc2632_driver);
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
