Linux IIO (Industrial I/O) Development
[Prev Page][Next Page]
- Re: [PATCH] iio: imu: inv_mpu6050: stabilized timestamping in interrupt, (continued)
- [PATCH] iio: humidity: hdc3020: fix hysteresis representation,
Dimitri Fedrau
- [PATCH v2 0/5] Add driver for LTC2664 and LTC2672,
Kim Seer Paller
- [PATCH 0/3] IIO dead struct cleanup,
linux
- [PATCH v2 0/6] minor fixes and improvements,
Angelo Dureghello
- [PATCH v2] iio: adc: adi-axi-adc: make sure DRP is locked on enable,
Nuno Sa via B4 Relay
- [PATCH v2 0/2] iio: adc: ad9467: use DMA safe buffer for spi,
Nuno Sa via B4 Relay
- [PATCH] drivers: iio: adc: add support for ad777x family,
ranechita
- [PATCH] dt-bindings: iio: adc: add a7779 doc,
ranechita
- [PATCH 0/3] Add support for more stk3311 variant,
Barnabás Czémán
- [PATCH 0/3] AD7173 fixes,
Dumitru Ceclan via B4 Relay
- [PATCH v2] iio: imu: inv_icm42600: add support of accel low-power mode,
inv . git-commit
- [PATCH v2 0/2] Add threshold events support,
Dimitri Fedrau
- [PATCH v3 0/9] adis16501 and adis1657x support,
Ramona Gradinariu
- [PATCH v8 0/6] iio: adc: ad7192: Add AD7194 support,
Alisa-Dariana Roman
- [PATCH v2 0/9] Add support for AD411x,
Dumitru Ceclan via B4 Relay
- [PATCH v2 1/9] dt-bindings: adc: ad7173: add support for ad411x, Dumitru Ceclan via B4 Relay
- [PATCH v2 2/9] iio: adc: ad7173: fix buffers enablement for ad7176-2, Dumitru Ceclan via B4 Relay
- [PATCH v2 5/9] iio: adc: ad7173: add support for special inputs, Dumitru Ceclan via B4 Relay
- [PATCH v2 3/9] iio: adc: ad7173: refactor channel configuration parsing, Dumitru Ceclan via B4 Relay
- [PATCH v2 4/9] iio: adc: ad7173: refactor ain and vref selection, Dumitru Ceclan via B4 Relay
- [PATCH v2 6/9] iio: adc: ad7173: Add ad7173_device_info names, Dumitru Ceclan via B4 Relay
- [PATCH v2 8/9] iio: adc: ad7173: Add support for AD411x devices, Dumitru Ceclan via B4 Relay
- [PATCH v2 9/9] iio: adc: ad7173: Reduce device info struct size, Dumitru Ceclan via B4 Relay
- [PATCH v2 7/9] iio: adc: ad7173: Remove index from temp channel, Dumitru Ceclan via B4 Relay
- Re: [PATCH v2 0/9] Add support for AD411x, David Lechner
- [PATCH v2] iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe(),
Harshit Mogalapalli
- [PATCH] iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe(),
Harshit Mogalapalli
- [PATCH] dt-bindings: iio: light: add veml6040 RGBW-LS bindings,
Arthur Becker
- [PATCH V2] iio: light: driver for Vishay VEML6040,
Arthur Becker
- [PATCH v7 0/5] iio: pressure: bmp280: Add triggered buffer support and,
Vasileios Amoiridis
- [PATCH 0/6] Add driver for ENS160 sensor,
Gustavo Silva
- [PATCH RFC v2 0/8] spi: axi-spi-engine: add offload support,
David Lechner
- [PATCH] dt-bindings: iio: adc: adi,axi-adc: tweak example node name,
David Lechner
- [PATCH 1/3] dt-bindings: iio: dac: add ad35xxr single output variants,
Angelo Dureghello
- [PATCH] iio:proximity:hx9031as: Add TYHX HX9031AS/HX9023S sensor driver,
Yasin Lee
Re: [PATCH] iio:proximity:hx9031as: Add TYHX HX9031AS/HX9023S sensor driver, kernel test robot
Re: [PATCH] iio:proximity:hx9031as: Add TYHX HX9031AS/HX9023S sensor driver, kernel test robot
Re: [PATCH] iio:proximity:hx9031as: Add TYHX HX9031AS/HX9023S sensor driver, kernel test robot
Re: [PATCH] iio:proximity:hx9031as: Add TYHX HX9031AS/HX9023S sensor driver, kernel test robot
Re: [PATCH] iio:proximity:hx9031as: Add TYHX HX9031AS/HX9023S sensor driver, kernel test robot
Re: [PATCH] iio:proximity:hx9031as: Add TYHX HX9031AS/HX9023S sensor driver, kernel test robot
Re: [PATCH] iio:proximity:hx9031as: Add TYHX HX9031AS/HX9023S sensor driver, Dan Carpenter
Re: [PATCH] iio:proximity:hx9031as: Add TYHX HX9031AS/HX9023S sensor driver, kernel test robot
[PATCH] counter: ti-ecap-capture: Handle error for clk_enable,
Chen Ni
[PATCH 0/2] add AD8460 DAC driver,
Mariel Tinaco
[PATCH v6 0/9] iio: pressure: bmp280: Add triggered buffer support and,
Vasileios Amoiridis
- [PATCH v6 1/9] iio: pressure: bmp280: Remove dead error checks, Vasileios Amoiridis
- [PATCH v6 2/9] iio: pressure: bmp280: Remove, add and update error messages, Vasileios Amoiridis
- [PATCH v6 3/9] iio: pressure: bmp280: Make error checks consistent, Vasileios Amoiridis
- [PATCH v6 4/9] iio: pressure: bmp280: Use unsigned data types for raw sensor data, Vasileios Amoiridis
- [PATCH v6 6/9] iio: pressure: bmp280: Introduce new cleanup routines, Vasileios Amoiridis
- [PATCH v6 5/9] iio: pressure: bmp280: Refactorize reading functions, Vasileios Amoiridis
- [PATCH v6 7/9] iio: pressure: bmp280: Generalize read_{temp,press,humid}() functions, Vasileios Amoiridis
- [PATCH v6 8/9] iio: pressure: bmp280: Add SCALE, RAW values in channels and refactorize them, Vasileios Amoiridis
- [PATCH v6 9/9] iio: pressure: bmp280: Add triggered buffer support, Vasileios Amoiridis
[PATCH 0/9] iio: pressure: bmp280: Add triggered buffer support and,
Vasileios Amoiridis
- [PATCH 1/9] iio: pressure: bmp280: Remove dead error checks, Vasileios Amoiridis
- [PATCH 2/9] iio: pressure: bmp280: Remove, add and update error messages, Vasileios Amoiridis
- [PATCH 3/9] iio: pressure: bmp280: Make error checks consistent, Vasileios Amoiridis
- [PATCH 4/9] iio: pressure: bmp280: Use unsigned data types for raw sensor data, Vasileios Amoiridis
- [PATCH 5/9] iio: pressure: bmp280: Refactorize reading functions, Vasileios Amoiridis
- [PATCH 6/9] iio: pressure: bmp280: Introduce new cleanup routines, Vasileios Amoiridis
- [PATCH 7/9] iio: pressure: bmp280: Generalize read_{temp,press,humid}() functions, Vasileios Amoiridis
- [PATCH 8/9] iio: pressure: bmp280: Add SCALE, RAW values in channels and refactorize them, Vasileios Amoiridis
- [PATCH 9/9] iio: pressure: bmp280: Add triggered buffer support, Vasileios Amoiridis
- Re: [PATCH 0/9] iio: pressure: bmp280: Add triggered buffer support and, Vasileios Amoiridis
[PATCH] iio: adc: adc7266: Use iio_device_claim_direct_scoped(),
Fernando Yang
[PATCH] iio: imu: bmi323: Fix trigger notification in case of error,
Vasileios Amoiridis
[PATCH v2 0/8] adis16501 and adis1657x support,
Ramona Gradinariu
[PATCH] iio: Drop explicit initialization of struct i2c_device_id::driver_data to 0,
Uwe Kleine-König
[PATCH RFC 0/4] iio: add support for multiple scan types,
David Lechner
[PATCH] iio: imu: inv_icm42600: add support of accel low-power mode,
inv . git-commit
[PATCH] iio: adc: ad9467: use DMA safe buffer for spi,
Nuno Sa via B4 Relay
[PATCH] iio: adc: adi-axi-adc: make sure DRP is locked on enable,
Nuno Sa via B4 Relay
[PATCH] iio: light: driver for Vishay VEML6040,
Arthur Becker
[PATCH v3 0/2] Add support for bosch bmi120,
Barnabás Czémán
[PATCH v2 0/2] Add support for bosch bmi120,
Barnabás Czémán
[PATCH 0/2] Add support for bosch bmi120,
Barnabás Czémán
[PATCH] iio: adc: ad9467: fix scan type sign,
David Lechner
[PATCH] dt-bindings: iio: dac: fix ad354xr output range,
Angelo Dureghello
[PULL V2] IIO: 2nd set of new device support, features and cleanup for the 6.10 cycle,
Jonathan Cameron
[PATCH] iio: imu: inv_icm42600: fix timestamp patch integration,
inv . git-commit
[PULL] IIO: 2nd set of new device support, features and cleanup for the 6.10 cycle,
Jonathan Cameron
Supporting a Device with Switchable Current/Voltage Measurement,
João Paulo Gonçalves
[PATCH 0/2] Use of `claim_direct_scoped` for improved error handling,
Jorge Harrisonn
[PATCH v2] iio: dac: ad5592r: fix temperature channel scaling value,
marc . ferland
[PATCH RFC v6 00/10] iio: adc: add new ad7380 driver,
Julien Stephan
- [PATCH RFC v6 01/10] dt-bindings: iio: adc: Add binding for AD7380 ADCs, Julien Stephan
- [PATCH RFC v6 03/10] dt-bindings: iio: adc: ad7380: add pseudo-differential parts, Julien Stephan
- [PATCH RFC v6 02/10] iio: adc: ad7380: new driver for AD7380 ADCs, Julien Stephan
- [PATCH RFC v6 04/10] iio: adc: ad7380: add support for pseudo-differential parts, Julien Stephan
- [PATCH RFC v6 05/10] iio: adc: ad7380: prepare for parts with more channels, Julien Stephan
- [PATCH RFC v6 06/10] dt-bindings: iio: adc: ad7380: add support for ad738x-4 4 channels variants, Julien Stephan
- [PATCH RFC v6 07/10] iio: adc: ad7380: add support for ad738x-4 4 channels variants, Julien Stephan
- [PATCH RFC v6 08/10] iio: adc: ad7380: add oversampling support, Julien Stephan
- [PATCH RFC v6 09/10] iio: adc: ad7380: add support for rolling average oversampling mode, Julien Stephan
- [PATCH RFC v6 10/10] iio: adc: ad7380: add support for resolution boost, Julien Stephan
[PATCH] iio: light: gp2ap020a00f: Remove some unused field in struct gp2ap020a00f_data,
Christophe JAILLET
[PATCH] iio: tmag5273: Remove some unused field in struct tmag5273_data,
Christophe JAILLET
[PATCH] iio: multiplexer: Remove an unused field in struct mux,
Christophe JAILLET
[PATCH] iio: temperature: max30208: Remove an unused field in struct max30208_data,
Christophe JAILLET
[PATCH v7 0/6] iio: adc: ad7192: Add AD7194 support,
Alisa-Dariana Roman
[PATCH v2 3/3] MAINTAINERS: Add Sensirion SDP500, Petar Stoykov
[PATCH v2 2/3] iio: pressure: Add driver for Sensirion SDP500,
Petar Stoykov
[PATCH v2 1/3] dt-bindings: iio: pressure: Add Sensirion SDP500,
Petar Stoykov
[PATCH v2 0/3] Add support for Sensirion SDP500,
Petar Stoykov
[PATCH] iio: dac: ad5592r: fix temperature scale,
marc . ferland
[PATCH v2 0/2] Fix the iio-gts-helpers available times table sorting,
Matti Vaittinen
[PATCH 0/5] Add threshold events support and some minor cleanup,
Dimitri Fedrau
[PATCH v2 0/7] regulator: new API for voltage reference supplies,
David Lechner
[GIT PULL] Second set of Counter updates for 6.10,
William Breathitt Gray
[PATCH v5 00/10] iio: pressure: bmp280: Driver cleanup and add triggered buffer support,
Vasileios Amoiridis
- [PATCH v5 01/10] iio: pressure: bmp280: Improve indentation and line wrapping, Vasileios Amoiridis
- [PATCH v5 02/10] iio: pressure: bmp280: Use BME prefix for BME280 specifics, Vasileios Amoiridis
- [PATCH v5 03/10] iio: pressure: bmp280: Add identifier names in function definitions, Vasileios Amoiridis
- [PATCH v5 04/10] iio: pressure: bmp280: Add more intuitive name for bmp180_measure(), Vasileios Amoiridis
- [PATCH v5 05/10] iio: pressure: bmp280: Make return values consistent, Vasileios Amoiridis
- [PATCH v5 07/10] iio: pressure: bmp280: Introduce new cleanup routines, Vasileios Amoiridis
- [PATCH v5 06/10] iio: pressure: bmp280: Refactorize reading functions, Vasileios Amoiridis
- [PATCH v5 09/10] iio: pressure: bmp280: Add SCALE, RAW values in channels and refactorize them, Vasileios Amoiridis
- [PATCH v5 08/10] iio: pressure: bmp280: Generalize read_{temp,press,humid}() functions, Vasileios Amoiridis
- [PATCH v5 10/10] iio: pressure: bmp280: Add triggered buffer support, Vasileios Amoiridis
[PATCH] iio: dac: ad9739a: write complete MU_CNT1 register during lock,
Nuno Sa
[PATCH v3] iio: adc: ti-ads1015: use device_for_each_child_node_scoped(),
Lincoln Yuji
[PATCH 0/8] iio: use 'time_left' instead of 'timeout' with wait_for_*() functions,
Wolfram Sang
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
