BMP2xx, BME280, BMP3xx, and BMP5xx use continuous buffers for their temperature, pressure and humidity readings. This facilitates the use of burst/bulk reads in order to acquire data faster. The approach is different from the one used in oneshot captures. BMP085 & BMP1xx devices use a completely different measurement process that is well defined and is used in their buffer_handler(). Suggested-by: Angel Iglesias <ang.iglesiasg@xxxxxxxxx> Signed-off-by: Vasileios Amoiridis <vassilisamir@xxxxxxxxx> Link: https://lore.kernel.org/r/20240512230524.53990-6-vassilisamir@xxxxxxxxx --- drivers/iio/pressure/Kconfig | 2 + drivers/iio/pressure/bmp280-core.c | 393 ++++++++++++++++++++++++++++- drivers/iio/pressure/bmp280-spi.c | 8 +- drivers/iio/pressure/bmp280.h | 21 +- 4 files changed, 405 insertions(+), 19 deletions(-) diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 3ad38506028e..0b5406a3f85d 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -31,6 +31,8 @@ config BMP280 select REGMAP select BMP280_I2C if (I2C) select BMP280_SPI if (SPI_MASTER) + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say yes here to build support for Bosch Sensortec BMP180, BMP280, BMP380 and BMP580 pressure and temperature sensors. Also supports the BME280 with diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index f709ad8a54e1..2fc5724196e3 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -41,7 +41,10 @@ #include <linux/regmap.h> #include <linux/regulator/consumer.h> +#include <linux/iio/buffer.h> #include <linux/iio/iio.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> #include <asm/unaligned.h> @@ -134,6 +137,12 @@ enum { BMP380_P11 = 20, }; +enum bmp280_scan { + BMP280_PRESS, + BMP280_TEMP, + BME280_HUMID, +}; + static const struct iio_chan_spec bmp280_channels[] = { { .type = IIO_PRESSURE, @@ -142,6 +151,13 @@ static const struct iio_chan_spec bmp280_channels[] = { BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_CPU, + }, }, { .type = IIO_TEMP, @@ -150,7 +166,15 @@ static const struct iio_chan_spec bmp280_channels[] = { BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_CPU, + }, }, + IIO_CHAN_SOFT_TIMESTAMP(2), }; static const struct iio_chan_spec bme280_channels[] = { @@ -161,6 +185,13 @@ static const struct iio_chan_spec bme280_channels[] = { BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_CPU, + }, }, { .type = IIO_TEMP, @@ -169,6 +200,13 @@ static const struct iio_chan_spec bme280_channels[] = { BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_CPU, + }, }, { .type = IIO_HUMIDITYRELATIVE, @@ -177,7 +215,15 @@ static const struct iio_chan_spec bme280_channels[] = { BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 2, + .scan_type = { + .sign = 'u', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_CPU, + }, }, + IIO_CHAN_SOFT_TIMESTAMP(3), }; static const struct iio_chan_spec bmp380_channels[] = { @@ -190,6 +236,51 @@ static const struct iio_chan_spec bmp380_channels[] = { BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_TEMP, + /* PROCESSED maintained for ABI backwards compatibility */ + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_CPU, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(2), +}; + +static const struct iio_chan_spec bmp580_channels[] = { + { + .type = IIO_PRESSURE, + /* PROCESSED maintained for ABI backwards compatibility */ + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 24, + .storagebits = 32, + .endianness = IIO_LE, + }, }, { .type = IIO_TEMP, @@ -200,7 +291,15 @@ static const struct iio_chan_spec bmp380_channels[] = { BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + .endianness = IIO_LE, + }, }, + IIO_CHAN_SOFT_TIMESTAMP(2), }; static int bmp280_read_calib(struct bmp280_data *data) @@ -316,7 +415,7 @@ static int bme280_read_humid_adc(struct bmp280_data *data, u16 *adc_humidity) int ret; ret = regmap_bulk_read(data->regmap, BME280_REG_HUMIDITY_MSB, - &data->be16, sizeof(data->be16)); + &data->be16, BME280_NUM_HUMIDITY_BYTES); if (ret) { dev_err(data->dev, "failed to read humidity\n"); return ret; @@ -362,7 +461,7 @@ static int bmp280_read_temp_adc(struct bmp280_data *data, u32 *adc_temp) int ret; ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB, - data->buf, sizeof(data->buf)); + data->buf, BMP280_NUM_TEMP_BYTES); if (ret) { dev_err(data->dev, "failed to read temperature\n"); return ret; @@ -423,7 +522,7 @@ static int bmp280_read_press_adc(struct bmp280_data *data, u32 *adc_press) int ret; ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB, - data->buf, sizeof(data->buf)); + data->buf, BMP280_NUM_PRESS_BYTES); if (ret) { dev_err(data->dev, "failed to read pressure\n"); return ret; @@ -874,6 +973,16 @@ static const struct iio_info bmp280_info = { .write_raw = &bmp280_write_raw, }; +static const unsigned long bmp280_avail_scan_masks[] = { + BIT(BMP280_TEMP) | BIT(BMP280_PRESS), + 0 +}; + +static const unsigned long bme280_avail_scan_masks[] = { + BIT(BME280_HUMID) | BIT(BMP280_TEMP) | BIT(BMP280_PRESS), + 0 +}; + static int bmp280_chip_config(struct bmp280_data *data) { u8 osrs = FIELD_PREP(BMP280_OSRS_TEMP_MASK, data->oversampling_temp + 1) | @@ -901,6 +1010,53 @@ static int bmp280_chip_config(struct bmp280_data *data) return ret; } +static irqreturn_t bmp280_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct bmp280_data *data = iio_priv(indio_dev); + s32 adc_temp, adc_press, t_fine; + int ret; + + guard(mutex)(&data->lock); + + /* Burst read data registers */ + ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB, + data->buf, BMP280_BURST_READ_BYTES); + if (ret) { + dev_err(data->dev, "failed to burst read sensor data\n"); + goto out; + } + + /* Temperature calculations */ + adc_temp = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(&data->buf[3])); + if (adc_temp == BMP280_TEMP_SKIPPED) { + dev_err(data->dev, "reading temperature skipped\n"); + goto out; + } + + data->sensor_data[1] = bmp280_compensate_temp(data, adc_temp); + + /* Pressure calculations */ + adc_press = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(&data->buf[0])); + if (adc_press == BMP280_PRESS_SKIPPED) { + dev_err(data->dev, "reading pressure skipped\n"); + goto out; + } + + t_fine = bmp280_calc_t_fine(data, adc_temp); + + data->sensor_data[0] = bmp280_compensate_press(data, adc_press, t_fine); + + iio_push_to_buffers_with_timestamp(indio_dev, &data->sensor_data, + iio_get_time_ns(indio_dev)); + +out: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 }; static const u8 bmp280_chip_ids[] = { BMP280_CHIP_ID }; static const int bmp280_temp_coeffs[] = { 10, 1 }; @@ -914,6 +1070,7 @@ const struct bmp280_chip_info bmp280_chip_info = { .start_up_time = 2000, .channels = bmp280_channels, .num_channels = ARRAY_SIZE(bmp280_channels), + .avail_scan_masks = bmp280_avail_scan_masks, .oversampling_temp_avail = bmp280_oversampling_avail, .num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail), @@ -942,6 +1099,8 @@ const struct bmp280_chip_info bmp280_chip_info = { .read_temp = bmp280_read_temp, .read_press = bmp280_read_press, .read_calib = bmp280_read_calib, + + .trigger_handler = bmp280_trigger_handler, }; EXPORT_SYMBOL_NS(bmp280_chip_info, IIO_BMP280); @@ -964,6 +1123,62 @@ static int bme280_chip_config(struct bmp280_data *data) return bmp280_chip_config(data); } +static irqreturn_t bme280_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct bmp280_data *data = iio_priv(indio_dev); + s32 adc_temp, adc_press, adc_humidity, t_fine; + int ret; + + guard(mutex)(&data->lock); + + /* Burst read data registers */ + ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB, + data->buf, BME280_BURST_READ_BYTES); + if (ret) { + dev_err(data->dev, "failed to burst read sensor data\n"); + goto out; + } + + /* Temperature calculations */ + adc_temp = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(&data->buf[3])); + if (adc_temp == BMP280_TEMP_SKIPPED) { + dev_err(data->dev, "reading temperature skipped\n"); + goto out; + } + + data->sensor_data[1] = bmp280_compensate_temp(data, adc_temp); + + /* Pressure calculations */ + adc_press = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(&data->buf[0])); + if (adc_press == BMP280_PRESS_SKIPPED) { + dev_err(data->dev, "reading pressure skipped\n"); + goto out; + } + + t_fine = bmp280_calc_t_fine(data, adc_temp); + + data->sensor_data[0] = bmp280_compensate_press(data, adc_press, t_fine); + + /* Humidity calculations */ + adc_humidity = get_unaligned_be16(&data->buf[6]); + + if (adc_humidity == BMP280_HUMIDITY_SKIPPED) { + dev_err(data->dev, "reading humidity skipped\n"); + goto out; + } + data->sensor_data[2] = bme280_compensate_humidity(data, adc_humidity, t_fine); + + iio_push_to_buffers_with_timestamp(indio_dev, &data->sensor_data, + iio_get_time_ns(indio_dev)); + +out: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + static const u8 bme280_chip_ids[] = { BME280_CHIP_ID }; static const int bme280_humid_coeffs[] = { 1000, 1024 }; @@ -975,6 +1190,7 @@ const struct bmp280_chip_info bme280_chip_info = { .start_up_time = 2000, .channels = bme280_channels, .num_channels = ARRAY_SIZE(bme280_channels), + .avail_scan_masks = bme280_avail_scan_masks, .oversampling_temp_avail = bmp280_oversampling_avail, .num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail), @@ -1000,6 +1216,8 @@ const struct bmp280_chip_info bme280_chip_info = { .read_press = bmp280_read_press, .read_humid = bme280_read_humid, .read_calib = bme280_read_calib, + + .trigger_handler = bme280_trigger_handler, }; EXPORT_SYMBOL_NS(bme280_chip_info, IIO_BMP280); @@ -1054,7 +1272,7 @@ static int bmp380_read_temp_adc(struct bmp280_data *data, u32 *adc_temp) int ret; ret = regmap_bulk_read(data->regmap, BMP380_REG_TEMP_XLSB, - data->buf, sizeof(data->buf)); + data->buf, BMP280_NUM_TEMP_BYTES); if (ret) { dev_err(data->dev, "failed to read temperature\n"); return ret; @@ -1123,7 +1341,7 @@ static int bmp380_read_press_adc(struct bmp280_data *data, u32 *adc_press) int ret; ret = regmap_bulk_read(data->regmap, BMP380_REG_PRESS_XLSB, - data->buf, sizeof(data->buf)); + data->buf, BMP280_NUM_PRESS_BYTES); if (ret) { dev_err(data->dev, "failed to read pressure\n"); return ret; @@ -1384,6 +1602,53 @@ static int bmp380_chip_config(struct bmp280_data *data) return 0; } +static irqreturn_t bmp380_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct bmp280_data *data = iio_priv(indio_dev); + s32 adc_temp, adc_press, t_fine; + int ret; + + guard(mutex)(&data->lock); + + /* Burst read data registers */ + ret = regmap_bulk_read(data->regmap, BMP380_REG_PRESS_XLSB, + data->buf, BMP280_BURST_READ_BYTES); + if (ret) { + dev_err(data->dev, "failed to burst read sensor data\n"); + goto out; + } + + /* Temperature calculations */ + adc_temp = get_unaligned_le24(&data->buf[3]); + if (adc_temp == BMP380_TEMP_SKIPPED) { + dev_err(data->dev, "reading temperature skipped\n"); + goto out; + } + + data->sensor_data[1] = bmp380_compensate_temp(data, adc_temp); + + /* Pressure calculations */ + adc_press = get_unaligned_le24(&data->buf[0]); + if (adc_press == BMP380_PRESS_SKIPPED) { + dev_err(data->dev, "reading pressure skipped\n"); + goto out; + } + + t_fine = bmp380_calc_t_fine(data, adc_temp); + + data->sensor_data[0] = bmp380_compensate_press(data, adc_press, t_fine); + + iio_push_to_buffers_with_timestamp(indio_dev, &data->sensor_data, + iio_get_time_ns(indio_dev)); + +out: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + static const int bmp380_oversampling_avail[] = { 1, 2, 4, 8, 16, 32 }; static const int bmp380_iir_filter_coeffs_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128}; static const u8 bmp380_chip_ids[] = { BMP380_CHIP_ID, BMP390_CHIP_ID }; @@ -1399,6 +1664,7 @@ const struct bmp280_chip_info bmp380_chip_info = { .start_up_time = 2000, .channels = bmp380_channels, .num_channels = ARRAY_SIZE(bmp380_channels), + .avail_scan_masks = bmp280_avail_scan_masks, .oversampling_temp_avail = bmp380_oversampling_avail, .num_oversampling_temp_avail = ARRAY_SIZE(bmp380_oversampling_avail), @@ -1426,6 +1692,8 @@ const struct bmp280_chip_info bmp380_chip_info = { .read_press = bmp380_read_press, .read_calib = bmp380_read_calib, .preinit = bmp380_preinit, + + .trigger_handler = bmp380_trigger_handler, }; EXPORT_SYMBOL_NS(bmp380_chip_info, IIO_BMP280); @@ -1546,8 +1814,8 @@ static int bmp580_read_temp(struct bmp280_data *data, s32 *raw_temp) s32 value_temp; int ret; - ret = regmap_bulk_read(data->regmap, BMP580_REG_TEMP_XLSB, data->buf, - sizeof(data->buf)); + ret = regmap_bulk_read(data->regmap, BMP580_REG_TEMP_XLSB, + data->buf, BMP280_NUM_TEMP_BYTES); if (ret) { dev_err(data->dev, "failed to read temperature\n"); return ret; @@ -1568,8 +1836,8 @@ static int bmp580_read_press(struct bmp280_data *data, u32 *raw_press) u32 value_press; int ret; - ret = regmap_bulk_read(data->regmap, BMP580_REG_PRESS_XLSB, data->buf, - sizeof(data->buf)); + ret = regmap_bulk_read(data->regmap, BMP580_REG_PRESS_XLSB, + data->buf, BMP280_NUM_PRESS_BYTES); if (ret) { dev_err(data->dev, "failed to read pressure\n"); return ret; @@ -1916,6 +2184,38 @@ static int bmp580_chip_config(struct bmp280_data *data) return 0; } +static irqreturn_t bmp580_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct bmp280_data *data = iio_priv(indio_dev); + int ret; + + guard(mutex)(&data->lock); + + /* Burst read data registers */ + ret = regmap_bulk_read(data->regmap, BMP580_REG_TEMP_XLSB, + data->buf, BMP280_BURST_READ_BYTES); + if (ret) { + dev_err(data->dev, "failed to burst read sensor data\n"); + goto out; + } + + /* Temperature calculations */ + memcpy(&data->sensor_data[1], &data->buf[0], 3); + + /* Pressure calculations */ + memcpy(&data->sensor_data[0], &data->buf[3], 3); + + iio_push_to_buffers_with_timestamp(indio_dev, &data->sensor_data, + iio_get_time_ns(indio_dev)); + +out: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + static const int bmp580_oversampling_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128 }; static const u8 bmp580_chip_ids[] = { BMP580_CHIP_ID, BMP580_CHIP_ID_ALT }; /* Instead of { 1000, 16 } we do this, to avoid overflow issues */ @@ -1928,8 +2228,9 @@ const struct bmp280_chip_info bmp580_chip_info = { .num_chip_id = ARRAY_SIZE(bmp580_chip_ids), .regmap_config = &bmp580_regmap_config, .start_up_time = 2000, - .channels = bmp380_channels, - .num_channels = ARRAY_SIZE(bmp380_channels), + .channels = bmp580_channels, + .num_channels = ARRAY_SIZE(bmp580_channels), + .avail_scan_masks = bmp280_avail_scan_masks, .oversampling_temp_avail = bmp580_oversampling_avail, .num_oversampling_temp_avail = ARRAY_SIZE(bmp580_oversampling_avail), @@ -1956,6 +2257,8 @@ const struct bmp280_chip_info bmp580_chip_info = { .read_temp = bmp580_read_temp, .read_press = bmp580_read_press, .preinit = bmp580_preinit, + + .trigger_handler = bmp580_trigger_handler, }; EXPORT_SYMBOL_NS(bmp580_chip_info, IIO_BMP280); @@ -2134,7 +2437,7 @@ static int bmp180_read_press_adc(struct bmp280_data *data, u32 *adc_press) return ret; ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, - data->buf, sizeof(data->buf)); + data->buf, BMP280_NUM_PRESS_BYTES); if (ret) { dev_err(data->dev, "failed to read pressure\n"); return ret; @@ -2205,6 +2508,36 @@ static int bmp180_chip_config(struct bmp280_data *data) return 0; } +static irqreturn_t bmp180_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct bmp280_data *data = iio_priv(indio_dev); + int ret, chan_value; + + guard(mutex)(&data->lock); + + ret = bmp180_read_temp(data, &chan_value); + if (ret) + goto out; + + data->sensor_data[1] = chan_value; + + ret = bmp180_read_press(data, &chan_value); + if (ret) + goto out; + + data->sensor_data[0] = chan_value; + + iio_push_to_buffers_with_timestamp(indio_dev, &data->sensor_data, + iio_get_time_ns(indio_dev)); + +out: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + static const int bmp180_oversampling_temp_avail[] = { 1 }; static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 }; static const u8 bmp180_chip_ids[] = { BMP180_CHIP_ID }; @@ -2219,6 +2552,7 @@ const struct bmp280_chip_info bmp180_chip_info = { .start_up_time = 2000, .channels = bmp280_channels, .num_channels = ARRAY_SIZE(bmp280_channels), + .avail_scan_masks = bmp280_avail_scan_masks, .oversampling_temp_avail = bmp180_oversampling_temp_avail, .num_oversampling_temp_avail = @@ -2239,6 +2573,8 @@ const struct bmp280_chip_info bmp180_chip_info = { .read_temp = bmp180_read_temp, .read_press = bmp180_read_press, .read_calib = bmp180_read_calib, + + .trigger_handler = bmp180_trigger_handler, }; EXPORT_SYMBOL_NS(bmp180_chip_info, IIO_BMP280); @@ -2284,6 +2620,30 @@ static int bmp085_fetch_eoc_irq(struct device *dev, return 0; } +static int bmp280_buffer_preenable(struct iio_dev *indio_dev) +{ + struct bmp280_data *data = iio_priv(indio_dev); + + pm_runtime_get_sync(data->dev); + + return 0; +} + +static int bmp280_buffer_postdisable(struct iio_dev *indio_dev) +{ + struct bmp280_data *data = iio_priv(indio_dev); + + pm_runtime_mark_last_busy(data->dev); + pm_runtime_put_autosuspend(data->dev); + + return 0; +} + +static const struct iio_buffer_setup_ops bmp280_buffer_setup_ops = { + .preenable = bmp280_buffer_preenable, + .postdisable = bmp280_buffer_postdisable, +}; + static void bmp280_pm_disable(void *data) { struct device *dev = data; @@ -2330,6 +2690,7 @@ int bmp280_common_probe(struct device *dev, /* Apply initial values from chip info structure */ indio_dev->channels = chip_info->channels; indio_dev->num_channels = chip_info->num_channels; + indio_dev->available_scan_masks = chip_info->avail_scan_masks; data->oversampling_press = chip_info->oversampling_press_default; data->oversampling_humid = chip_info->oversampling_humid_default; data->oversampling_temp = chip_info->oversampling_temp_default; @@ -2415,6 +2776,14 @@ int bmp280_common_probe(struct device *dev, "failed to read calibration coefficients\n"); } + ret = devm_iio_triggered_buffer_setup(data->dev, indio_dev, + iio_pollfunc_store_time, + data->chip_info->trigger_handler, + &bmp280_buffer_setup_ops); + if (ret) + return dev_err_probe(data->dev, ret, + "iio triggered buffer setup failed\n"); + /* * Attempt to grab an optional EOC IRQ - only the BMP085 has this * however as it happens, the BMP085 shares the chip ID of BMP180 diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c index 62b4e58104cf..e5abee15950e 100644 --- a/drivers/iio/pressure/bmp280-spi.c +++ b/drivers/iio/pressure/bmp280-spi.c @@ -40,14 +40,10 @@ static int bmp380_regmap_spi_read(void *context, const void *reg, size_t reg_size, void *val, size_t val_size) { struct spi_device *spi = to_spi_device(context); - u8 rx_buf[4]; + u8 rx_buf[BME280_BURST_READ_BYTES + 1]; ssize_t status; - /* - * Maximum number of consecutive bytes read for a temperature or - * pressure measurement is 3. - */ - if (val_size > 3) + if (val_size > BME280_BURST_READ_BYTES) return -EINVAL; /* diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h index a3d2cd722760..0933e411ae2c 100644 --- a/drivers/iio/pressure/bmp280.h +++ b/drivers/iio/pressure/bmp280.h @@ -304,6 +304,16 @@ #define BMP280_PRESS_SKIPPED 0x80000 #define BMP280_HUMIDITY_SKIPPED 0x8000 +/* Number of bytes for each value */ +#define BMP280_NUM_PRESS_BYTES 3 +#define BMP280_NUM_TEMP_BYTES 3 +#define BME280_NUM_HUMIDITY_BYTES 2 +#define BMP280_BURST_READ_BYTES (BMP280_NUM_PRESS_BYTES + \ + BMP280_NUM_TEMP_BYTES) +#define BME280_BURST_READ_BYTES (BMP280_NUM_PRESS_BYTES + \ + BMP280_NUM_TEMP_BYTES + \ + BME280_NUM_HUMIDITY_BYTES) + /* Core exported structs */ static const char *const bmp280_supply_names[] = { @@ -397,13 +407,19 @@ struct bmp280_data { */ int sampling_freq; + /* + * Data to push to userspace triggered buffer. Up to 3 channels and + * s64 timestamp, aligned. + */ + s32 sensor_data[6] __aligned(8); + /* * DMA (thus cache coherency maintenance) may require the * transfer buffers to live in their own cache lines. */ union { /* Sensor data buffer */ - u8 buf[3]; + u8 buf[BME280_BURST_READ_BYTES]; /* Calibration data buffers */ __le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2]; __be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2]; @@ -425,6 +441,7 @@ struct bmp280_chip_info { const struct iio_chan_spec *channels; int num_channels; unsigned int start_up_time; + const unsigned long *avail_scan_masks; const int *oversampling_temp_avail; int num_oversampling_temp_avail; @@ -459,6 +476,8 @@ struct bmp280_chip_info { int (*read_humid)(struct bmp280_data *data, u32 *adc_humidity); int (*read_calib)(struct bmp280_data *data); int (*preinit)(struct bmp280_data *data); + + irqreturn_t (*trigger_handler)(int irq, void *p); }; /* Chip infos for each variant */ -- 2.25.1
